Local PBS Channels

Will FIOS add WUNC TV (PBS) to the local Norfolk/Virginia Beach channel lineup?  We received both WUNC PBS and WHRO PBS via Cox Cable and are disappointed to see that WUNC is not on the FIOS lineup.  WUNC has excellent programming that is different than (and often more interesting) than WHRO.   jbsman

ssetta - WUNC broadcast probably is technically part of, or shares the Norfolk/Va Bch DMA (defined as
Norfolk - Portsmouth - Newport News, VA - NC DMA 23.1 91.7). 
Both Cox Cable and FIOS carry WSKY which broadcasts from Manteo, NC, well south of here.
To whom would I make a suggestion to carry this station?
jbsman

Similar Messages

  • LOCAL Weather Channel 49

    What has happened to my local weather - channel 49?!!! If I wanted to watch the weather channel I turn to 119. Now my local channel has national weather information. My dad lives in southeast PA and said that it took two weeks before his local weather was restored. Please put it back to local weather! 

    Where are you located?
    If I remember correctly, the PA outage was due to a hardware failure.
    May be the same in your area.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • Local TV channels

    Hi, I currently have Internet services only with Verizon FiOS.Since my TV is not in the best position, an indoor TV antenna is not working properly for us so I was exploring the possibility of getting the Local TV channels through Verizon. I know you can get the "FiOS TV Local" which costs $12.99/month, the question is:Does anybody know if Verizon encrypts these local channels? They've offered me to get the HD digital adapter for an additional $11.99/month but if they're not encrypting/scrambling the local TV channels then I shouldn't need that. Option B would be using the FiOS app for Xbox, in which case I know for sure I wouldn't need that adapter. Thanks!German

    Well.. I'm trying to add FiOS TV Local and even though they're not encrypting these channels they still require me to rent at least one STB. So, if I don't have a TV (just a computer) but I want to watch the local TV channels and buy the service from Verizon, you're obligated to rent a STB for an additional $12/month. I was actually planning on using the Roku player (as I don't have a coaxial outlet near the TV) so it's seems the only option is to rent the STB and leave it in the garage unplugged. I don't know why I was expecting something different from Verizon, all the cable companies are the same.

  • Local cable channel - no picture just sound

    I keep calling and emailing Verizon about the two local access channels that have no picture, just sound.  I can't get them to fix it.  How do I get Verizon to fix this problem.
    Thank you for your help.

    http://forums.adobe.com/thread/1195540

  • Can i play local radio channels on my i phone 3gs

    can i play local radio channels on my i phone 3gs without internet connection

    iPhones do not have a radio tuner to receive local radio broadcasts. 

  • Missing Local HD Channels

    I've had a problem with missing local HD channels, including NBC during the Olympics. Despite multiple phone tech calls and a tech visit, my problem has not been fixed. I've been hearing that some other Verizon customers in the Beaverton area have had this same problem, and completely changing out coax cables did not fix it. My incoming signal is good, but signal to noise is below what is should be (19). I have a suspicion that it may somehow be linked to my DVR/set-top box, as the latest case of missing channel 508 occurred just as I started recording. Only two channels seem to be affected, 506 and 508, both local HD channels.

    You are a long way away from the Crystal Palace transmitter and COM7 is transmitting at only 15,600 Watts compared to the 200,000 Watts that the other existing muxes use.  So weaker signal  may not be being picked up by the dual tuner Youview bpx
    http://www.ukfree.tv/txdetail.php?a=TQ339712
    What signal strength do you get on your other TV ?

  • Here we go again- local HD channel going out going on 3 years now

    Was told to call the local manager {edited for privacy}. if the problem happened again and it has been.  The email reads as an invalid email address and his voice mail is not accepting calls because it has been full for the 2 weeks I have been calling. 
    Can someone at Verizon get me in touch with him?????????
    Problem:
    For the past 2 years I have had the local NBC in Richmond VA (WWBT Channel 12 on FIOS 512) affiliate occasionally goes completely black.  When I switch to the SD channel (12 on FIOS) the SD signal is always there.  I go back and the HD channel is still black.  If I am not watching and DVR'ing something, I will have various periods of black on my recording.  It will go back on it's own after a period of time when I am not watching and will come right back if I am watching as long as I power off the HD DVR to reboot. This has happened despite 3 HD DVR upgrades (started with the moto 6416, continued with the 7216, and keeps happening on my current 7232).  Never had a problem on my SD boxes because it is an HD signal problem.  Use HDMI and tried switching to component and had the same problem.  2 different brand HD TV's (Samsung and Panasonic) with same result.  Had the tech over a 4 times (replaced ONT once, other times detected no signal problems or connection problems) in the last few years.  Don't know what else to check as Verizon seems out of ideas.  Really getting tired of coming home hoping to see a DVR'd NBC program and finding it be black when I push play. 
    Still happening after last tech (Archie) came 2 months ago and replaced ONT (again) and the splitter coming in.  He said the splitter was a 4 branch and he put in a 3 branch. 
    Help!
    Ericvq

    I appreciate you may not be able to do some of the requests but maybe you can get some help from your son but in order for the forum members to help please can you post the adsl stats from your router you may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or if HH4/5 then go to troubleshooting then logs and you are looking for 2 line together when hub last connected to internet and they will show your connection speed and noise margin or if netgear enter 192.168.0.1). Then run  btspeedtester  (MAC users may have problems). when first test completes then run diagnostic test and post the results ( do not reset the router).
    are you connected directly via a filter to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
    Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
    Someone may then be able to offer help/assistance/suggestions to your problem
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • What actually is Quick Time movie?

    Hello guys,
    when exporting my HDV video project from FCP using Quick Time movie option, what actually is it? When I look at file info, it says .mov file, Quick Time movie format, codec HDV 1920x1080. So what is Quick Time movie? And how it differs from let's say QuickTime in Compressor?
    Thank you.

    As has already been stated, a .mov file is like a box that contains video and audio. The video and audio could be made from any number of codecs.
    There is NO universal high quality video file format that will playback an all systems or platforms. In order for ANY video/audio file to playback on any given system/platform, it MUST HAVE the codecs used to make those files installed on that system. There are many QuickTime .mov files that will NOT playback on a Mac, IF the specific codec needed isn't installed on that Mac.
    The same is true with the .avi files format; .avi is just a box like QuickTime.
    You're best bet would be to identify the playback systems requirements for video/audio files and then target your output for that. Do it for every system/platform/delivery method that the file will be played on.
    For example, I produced a program that would be played at the main branch of our library. Their playback system required an MPEG-2 Transport Stream and had very specific bit rate requirements. They also wanted the program to air on the local PBS channel, which had totally different requirements. And finally, they wanted several copies on DVD to distribute to donors whom helped make the exhibit possible. So with just one program, I had to output three different file types for this one project. This is also true of television broadcast. Different broadcasters will have different requirements. Some want BetaSP tape, some want DigiBeta. Some want an MPEG-2 Program Stream and some might even want a DVD-Video. Don't expect there to be a "one file fits all" type of situation.
    -DH

  • Lost PBS and ch. 5 HD channels in clear QAM

    We live in Newton MA and subscribe to the FiOS TV.  We have a LCD TV mounted on kitchen wall that we could not find room for a HD STB and have been satisfied to have the PBS HD channel through clear QAM for the kids in the morning.  This seems to have disappeared along with channel 5 HD channel in the recent past and I have done repeated scannings to no avail.  Is the local HD channel signal going to disappear from clear QAM and only SD plus music will remain?
    Alternative a very small HD receiver could be the solution but Verizon does not have such a STB for rent.
    Any one with similar problem?

    I too suddenly lost most of my clear hd channels except for one. SD channels are there, but I didnt count them.
    But when I tried with my tv card, it was able to pick them up(the missing hd channels).
    Do you have another tv to try?  Maybe the qam tuner got damaged. Whats the brand of your tv?

  • Why does Verizon shuffle arond local channels?

    I have a question.
    Now, I currently have DirecTV but I've been thinking about getting Verizon FiOS when it is finally available in my area.  One thing though that I'm noticing about Verizon is they appear to be doing this same crazy practice that the local Cable Companies does... It drove me crazy all the time...  Basically, it is where they shift all the local channel numbers around so you have to keep stopping to think about where the channel has been moved to.
    For example in the Boston, the local terrestrial channels are like this.
    2(WGBH), 4(WWBZ), 5(WCVB), 7(WHDH), 11(PBS New Hampshire), 25(WFXT), ... 44(WGBX), 56(WLVI) 62, 68,etc. Simple enough.  Now thankfully DirecTV keeps this same pattern...
     However on Verizon for say the city of Belmont, MA (Zipcode "02476") the channel lineup is like this.. 38 comes in on 3. 25 comes in on 8. 56 jumps to 12...  etc.  No kind of normalcy basically....
    Why did Verizon do this????I see they already have channels going over 1000 so why didn't they vacate 0-99 nationally so the local channels can fall into their correct slot and then start the cable stations like say above channel 99???
    In having DirecTV, I've noticed the way that company gets around needing to shift all the local channels all over is they start all of their cable TV stations above channel 99.  This leaves 2-99 as open- so that the local channel can goto its correct allotment anywhere in the USA.  It just seems logical to leave the local channels in their true slot so I'm wondering what was soo appealing about this type of format where everything gets scattered all over.
    Does anyone have some idea of what I'm missing and perhaps if there's some kind of method to this madness-- which I've never quite understood?
    ~J. P.

    I'm glad I was able to reassure you, but I now think I went too far. Looking at your channel listings you provide, Verizon has some major problems to make it all line up. And looking in more detail at ours, it isn't as simple as I made it out to be.
    Verizon, IMO to their credit, has tried to standardize channel assignments for most everything around the country. Easier for them I suspect. Anyway, they start their SD cable channels at 50 in most places, I think; that means that UHF channels 50 and above must be relocated somewhere, and they do that, down into the low range. Here in Texas, some of the higher broadcast channels, but not all, are relocated - 27 to 7, 33 to 9, 39 to 10, etc, while 21 is on 21, 29 is on 29, etc.Verizon puts the local PEG cable channels at 30-47, then TV Guide at 48, and local weather at 49, then the real cable channels 50 and above. So all of the local broadcast channels that they carry are reloacated if necessary to below 30 here.
    The HD channels (the ones that do offer HD channels) do follow the scheme I mentioned, local + 500.
    When I made my statement earlier, I was really thinking of the "major" channels (ABC, CBS, FOX, PBS, etc), because those are pretty much the only local channels I watch, I forgot about all of the various smaller channels (religeous, Spanish language, etc) that they do carry. Sorry, I really didn't mean to make a mistake, I should have actually looked at the lineup first.
    Justin
    Verizon FiOS TV, Internet, and phone
    IMG 1.6.0, Build 06.89
    Keller, TX

  • FIOS 1 and local originatio​n channels in Toms River NJ

    I am confused about what the status is with Fios 1 where I live.  If I go on my account on the Verizon website, and look at the TV Guide listings on line, it shows the channel in the line up.  I can not get it on any of my set top boxes, however, the channel is there through my QAM tuners on both my TV set and DVD recorder (SD signal only, not HD). 
    Friends who live in another part of town apparantly do get the channel 1/501 on their boxes, and it shows up in their on screen guide.  It doesn't on ours.
    I really don't want to call about it as it will probably be more hassle than it is worth, and I probably wouldn't watch it much anyway, but it is another option and would be nice to have.  Anyone else out there having a similar observation?
    Also, just discovered that the channel from Ocean County College is now on Fios on channel 26 (it's branded as Ocean 20, as that's the channel it is on for Comcast).  They show NASA TV on the overnight hours, for those who are interested. 
    Oddly, we are also getting the board of education channel for Kenilworth, NJ on channel 26.  Could that be a test signal for possibly getting the Toms River Schools channel sometime in the near future?  Strange as it might sound, that is probably the one channel that we had on Comcast that I miss, if for no other reason than it was the best early warning for school closings.  (BTW, the Toms River Schools channel is a lot more polished than what I've seen from Kenilworth, for what it's worth.)

    Hey TR-Tim...thanks for you interest in Fios1. Currently Fios1 is available to Northern New Jersey customers. Once it becomes available in your area, you will recieve 30 days notice prior to it coming out.  Fios 1 is not encrypted which is why you are able to pick up the channel outside of your box.  Fios 1 is not currently available in your  market which is why it is not being broadcasted thru our boxes.
    For your second question, your muncipalities makes the decision as to what access channels are broadcasted. We, here at Verizon, don't make those decisions. You can actually go to your municipality and ask them what their procedure is regarding local access channels and what kind of content you would like to have broadcasted. They in turn submit that information to us.
    Thank you for reaching out to us, continue to do so. We are here if you need us. Thank you!
    Constance
    Verizon Telecom
    Fiber Solution Center
    Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan. Follow us on Twitter™!

  • FIOS local channels SD not available - 20147

    Is anybody else finding that their local SD channels (below say channel 10) are not available yet their corresponding HD ones are fine?

    I responded to your identical post at http://forums.verizon.com/t5/FiOS-TV-Programming/Local-Weather-Channel-Not-Available-on-SD-STB/m-p/4... 
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • Use Coax for Local OTA digital channels.

    I'm new to FIOS. But I remember Comcast allows basic local OTA channels using the COAX cable even when I was only a Internet Customer. I was wondering if Verizon was the same way? I'm only a Interet customer, no TV service. I basically want to split the coax, one to TV to get local channels and the other to the Router. Is this possible. I'm not at home right now otherwise I would of tried it already.
    Any help is greatly appreciated.
    TIA

    Yes, you can split the coax as needed and you can put the router on any coax tap.
    I don't believe FiOS provides any TV channels when you don't subscribe to TV.
    The difference is cable sends the same TV channel package to every house with access control managed by the set-tops.  Unencrypted channels are available to all as there is no easy way to block them.
    FiOS, on the other hand, generates the coax signal in the ONT.  It is trivial for Verizon to enable and disable TV service by adjusting the ONT.
    If you want local channels and don't want to pay for them you should consider an antenna.
    Good Luck.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • The FIOS Channel Listings need to be rearranged.

    When I first got FIOS over a year ago, there were slightly less channels, and the channels that were here were well organized by the group of 10 they were in. For example, the 50s are for major entertainment channels. The 70s to 90s are for Sports. It's logical.
    But since then, Verizon have seemed to add channels at random. In the 190s, you have both Chiller and FearNET... as wel as E!... as well as the TV Guide Network, FuelTV, and ABCFamily. None of those are related. A ton of these channels need to be rearranged. Why is Sleuth inbetween Bravo and Logo? The 180s are as follows:
    180 - Syfy
    181 - A&E
    182 - CRIME
    183 - truTV
    184 - GSN
    185 - Bravo
    186 - Sleuth
    187 - LOGO
    188 - Ovation
    189 - BBC America
    There is a logic to that. A&E, CRIME, and truTV should be togther, for example. But Syfy does not belong here. BBC America does not either, although it fits in well with 190 and 191, so I assume you could make that argument, though it breaks the channel listing logic.
    The 460s and up don't make any sense to me. I don't even remember I have them. It's a random collection of channels that seem like they belong before the 50s, and are instead dumped at the end of the lineup. At the VERY LEAST, they should be before the PPV Channels, and not after. There's a bunch of PBS channels here, which is bizarre since there are a bunch of PBS channels in the <50s. And while I know you can't fit them in there because of all the Local Channels, it is confusing to me, as well as seemingly hiding the channels from me.
    In addition to that, what is with the HD Channels? Some of them don't match their non-HD channel listing number. The Disney Channel is 250, for the non-HD version. For some reason, it is 780 in the HD version. It should be 750.
    There are many areas where I would like to see improvement in simple things such as that. It's a much easier thing to fix than adding all the HD Channels I'd want

    The only way i can see to do this, is to select your audio track in the timeline and export using Quicktime conversion/ "format" AIFF, check in options that it is set to mono. Save the file and import into Audition. It works for me although I have Soundbooth not Audition.
    Good luck.
    DM

  • Is there a "Fireplace" channel for the holidays?

    This weekend I went to a party at a friends house.
    On his TV, he had a scene of a fireplace looping.
    It was quite nice.
    Does FIOS have such a feature / channel?\
    Thanks, and Merry Christmas!

    WGN appears to be playing a yule log fireplace today as well as WB and your local PBS could as well.

Maybe you are looking for

  • Focus Problem -- Two Non Modal Dialogs

    Hi , In my applet, when user does something which is not allowed, I display an error message box (JOptionPane dialog - modal). There is another dialog box (non modal) that user can open to view search results and put it aside the applet window to do

  • Hyperlink "status bar" for mail??

    I don't seem to find this discussed, but why doesn't Mail have the same sort of status bar that Safari has that enables one to see--in the status bar at bottom--the url address that one might go to before actually clicking on the link. I would think

  • Is it possible to use portal service written in Java?

    Hello, I've written a certain portal service in Java and deployed it to the portal and it is working OK. My question is if it is possible for .NET developers to use it and it's method in their projects as I am using in my Java and DynPro projects. Ro

  • HP solution centre software is no longer available (Deskjet 1050A, Windows 7)

    I installed the drivers and software when I received the printer (HP Deskjet 1050A All In One) over a year ago it has always worked OK. Used it for the last time yesterday. Now, when I click on the same desktop icon or run it from my programs menu I

  • How do I crop an image to print

    Please help. I have a horizontal image in lightroom that Im trying to upload to Shutterfly. When I upload it to Shutterfly, it crops some of the people out of it. I've tried everything to adjust the size in LR but it still keeps cropping the image. I