Local SRV CVP for HA CUCM

Hello I have a question, I just configured HA in CVP for CUCM using LOCAL SRV but when I do a calls the calls to do not route a phone Agent only hear ring back and pop of CTI Toolkit of agent says Reserve, in my CVP I get this message.
Line 7542: 3686: 10.6.20.202: Oct 09 2011 11:22:23.609 -0500: %CVP_7_0_SIP-7-CALL: {Thrd=Pool:SIP[2847]} CALLGUID = CFB8BF0BF1C811E0817D081FF3053080 LEGID = CFB8BF0BF1C811E0817D081FF3053080-1318177343609168 - [OUTBOUND]: INVITE TO <sip:3232@CCMOM03;transport=udp> FROM 2494225016 <sip:[email protected]:5060> EXPIRES[60] 100REL[Unsupported]
I have configured this in my SRV.XML and
DNS SRV Method for Load Balancing and Failover without a Proxy Server
<?xml version="1.0" encoding="UTF-8" ?>
<locater>
<host name="CCMOM03">
<record weight="30" priority="1" destination="10.X.X.1" port="5060"/>
<record weight="30" priority="2" destination="10.X.X.2" port="5060"/>
</host>
can anyone help me?
Thanks.
El mensaje fue editado por: Santiago Salvador Figueroa

Its been a while since set one of these up.
Is the host name "CCMOM03" in your SRV.XML file the real name of one of your CUCM servers, I usually use the Publisher name.
I also use the full name as in: CCMOM03.mrd.net.mx
That full name needs to map via your internal DNS
Graham

Similar Messages

SRV Record for TC Software(SX20,C20)

Hi all,
We tested DNS SRV record for two VCS-Cs that are not clustered.
MCU works fine with those SRV records, but C20, SX20 do not work.
Can't TC endpoints receive SRV records?
VCS：X8.2.1
MCU5300：4.5(1.45)
C20,SX20：TC7.2.0
Best Regards,
Kotaro

Hi Patrick,
Sorry for the late reply.
I mentioned "MCU works fine with those SRV records, " but actually it didn't work.
The MCU just received two GKs IP addresses as Alternative Gatekeeper.
Now we use records below.
We configure "vcs1.test.local" as an SX20's Gatekeeper.
But when "vcs1.test.local" fails, the SX20 never register with "vcs2.test.local".
=====DNS Records=====
vcs1.test.local（A） and its Pointer record.
vcs2.test.local（A） and its Pointer record.
_h323cs._tcp.test.local
priority=1
weight=0
port=1720
svr hostname=vcs1.test.local
_h323cs._tcp.test.local
priority=10
weight=0
port=1720
svr hostname=vcs2.test.local
_h323ls._udp.test.local
priority=1
weight=0
port=1719
svr hostname=vcs1.test.local
_h323ls._udp.test.local
priority=10
weight=0
port=1719
svr hostname=vcs2.test.local
_h323rs._udp.test.local
priority=1
weight=0
port=1719
svr hostname=vcs1.test.local
_h323rs._udp.test.local
priority=10
weight=0
port=1719
svr hostname=vcs2.test.local
Best Regards,
Kotaro

Setting up local testing server for coldfusion 9

I could use some help with this thread in coldfusion forum...
setting up local testing server for coldfusion 9 w dreamweaver on mac
http://forums.adobe.com/thread/773350
thanks

I'm marking this as assumed answered, as you seem to have solved the problem in the other thread.

IP Phone SSL VPN to ASA for multiple CUCM (CallManager)

hi all,
I have a case to support multiple CallManager clusters in different locations for internet SSL VPN IP Phone. We will deploy one ASA firewall for SSL VPN IP Phone connections. So, can we use single ASA firewall for mulitple CUCM clusters?? In order words, Internet IP Phone will connect to different CUCM via a single ASA firewall (by using SSL VPN).
I tested I need to upload the ASA's certificate into CUCM and upload CUCM's certificate into ASA for one ASA to one CUCM. If I create multiple profile (e.g. different URL for phone logins) for different CUCM. Is it possible to do that?
thanks for your input!
Samuel

Samuel,
Did you ever find an answer to your question? I have a similar scenario.
Any input would be appreciated.

No local currency found for plant and sales org.

Hi Guru's,
I am face to a problem that i don't understand.
I load the standard master data 0PLANT and i have the basic issues : No local currency found for plant and sales org.
I already saw this error so i check the basics to solve it.
I respect the comp_code, sales_org and than plant sequence.
i checkek the routines, no problem.
for some plants it works. i extract 8 plants 2 works the rest not. the reason is that there is no sales org affected in my PSA table for those plants.
But (and this is the problem) when i check the SAP source table T001W i can see that plants are corectly affecte to sales organization
So do you have any idea of my problem ?
do you know the transaction on ECC to maintain division and sales org affectation
Thannks
Cyril

Hi,
Pls have a look at this similar post:
[No Local Currency found in Plant |How can I view the code for a routine in an update rule;
Hope it helps...
Regards,
Ashish

BUG! Not system locale Filenames support for 32-bit applications error in Windows 8.1 x64 and other microssoft x64 OS-s.

BUG! Not system locale Filenames support for 32-bit applications error in Windows 8.1 x64.
All Windows x64 (XP,2003,2007,Vista,7,8) have no support for not system locale filenames|foldernames for all 32-bit applications. I think it is BUG!
For example, it is possible to read files|folders with French or Chinese in English locale windows installed, rename it, but it is not possible open it, edit or delete. (ERRORS: File not found OR Unknown format)
With using 64-bit programs no such problems. How does it works and how can I fix this? Is it problem with encoding in translating kernel instructions for 32-bit apps in x64 Windows OS's? Whether there are
solutions to this problem OR some hacks|fixes?

Hi,
Have you installed the language package for French or Chinese?
If no, please download the language package and install them.
To download language package, please click the link below,
http://windows.microsoft.com/en-US/windows/language-packs#lptabs=win7
Best Regards.
Steven Lee
TechNet Community Support

No local help files for Photoshop CS6 extended

Hi
I wish to use local help files for Photoshop CS6 but only online support is available. Local files are not listed under the Adobe Help preferences. The option to search only local rather than online help is greyed out. I found and downloaded a PDF with of the help files but don't know where to install it or if this is possible. I have CS 5 Creative Suite and this works fine giving the option of local or online help when accessed.
Is there a way to install and use local help files in photoshop CS6?
Thank you.

Hi and thanks for directing me to that article, it should have done the trick. I am using mac mountain lion 10.8.5.
The help system has always operated oddly - I have Photoshop cs6 but also the cs5 master suite installed. CS5 works fine but Photoshop cs6 only gives the option for online help and then directs me to the CC site. There is no simple listing for just Photoshop help in the help menu - presumably as it is not seeing it installed
I tried various configurations in the article, having to set up the folders they suggested. In my case, in a variety of alternative places as I have a boot up volume with the documents folder moved onto a RAID array so the Shared folder is not in the documents folder but in Users on the boot drive. So - confusing - but tried all the likely candidates and folder configurations/locations while following the instructions as closely as possible. Even tried an documents folder alias to redirect the program to the alternative path way.
At least now I have the PDFs and can look through them outside the adobe interface. The problem with the community site being questions regarding photoshop alone, yield answers for all sort of other issues and programs.
Thanks for your help though, which should have worked, appreciated.

Switching on Local Seciruty Handeling for GUI and pointing it to a server

We are looking to switch on local security handling for SAP gui 7.20 and point it to a new installation server to enable automatic patching. We already know about the registry entries -
HKLM\SOFTWARE\SAP\SAPsetup\SAPstart\AutoUpdate\SAPLogon.exe\UpdateMode
HKLM\SOFTWARE\SAP\SAPsetup\SAPstart\AutoUpdate\SAPLogon.exe\Prob
to switch on the update check when logging on but can anyone advise me what files need updating to make the update check look at a different server?
Thanks

Thanks Dan,
The space between 'l' and 'e' was a formatting error while I was pasting text to this forum.
Currently, I have
<cfset filedirectoryYear = "E:\Files Submitted\"&#form.current_year#&"\"&#form.division#&"\">
<cfif FORM.attachment_1 neq "">
       <cffile action="upload"
               accept="text/plain,application/msword,application/pdf,application/rtf "
                 filefield="attachment_1"
                 destination="E:\temp\uploads"
                 nameconflict="Makeunique"
        >

<cfset submittedfileName =
#form.departmentname#&"_"&#form.departmentnumber#&"_"&#form.section_number_1#&"."&#cffile. ClientFileExt#>
<cfset presentfileName = #cffile.serverFileName#&"."&#cffile.ClientFileExt#>
        <cffile
action="rename"
source="E:\temp\uploads\#presentfileName#"
destination=#filedirectoryYear##submittedfileName#
>

<cfset attachment_local_file_1 = #filedirectoryYear#&#submittedfileName#&#cffile.ClientFileExt#>
</cfif>
<cfset attachment_local_file_1 = #filedirectoryYear#&#submittedfileName#>
When I submit, I get the error message
"Attribute validation error for tag CFFILE.
The value of the attribute source, which is currently c:\Course Syllabi\uploads\Web Based System Two Page HandOut.pdf, is invalid and the line below is referred.
destination="#filedirectoryYear##submittedfileName#"
The filedirectoryYear path exists i.e. I have E:\Files Submitted\2011-2012\Finance. What could be the issue?
P.S. I got it working, The filedirectoryYear path value was not the actual directory path\name in the filesystem. Once I had the
correct name in the filesystem, the application worked fine.

Local Administration rights for Xcelcius and Crystal Reports

Hello Customercare,
I am currently compiling a list of software that does and does not require local administrator rights to install and run.
I was wondering if you would be able to assist me, we currently use Crystal Reports version 8.5 and Crystal Xcelsius 4.5. I need to find out if these programs require local administrator rights on the computer they are to be used on to a) Install properly and B) run from that computer by a user without local administrative rights for that machine.
Please let me know or point me in the right direction of a resource who would be able to help me with the above information.
Many thanks for your time,
Phil Booth
GroupM
Technical Support Engineer

Hi Joseph,
Download [Product guide/end userdocument|https://websmp103.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000713358&_SCENARIO=01100035870000000202&] select your product.
For Business objects Integration kit for SAP click [here|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f]
Regards,
Shweta

Can we create a local client copy for the RFID Client in discovery Box

Can we create a local client copy for the RFID(400 Client) in the Discovery Box,and if created which profile we have to select for the client and also at a time we can work on these both client or not .

This isn't possible with Live Mail. Acrobat has an add-in for Outlook (which you've used), but there is no similar function for Live Mail.

Error 'no local web solution for html engine installed. operation failed'

Hi all
I am trying to install JD Edwards EnterpriseOne.
I have done the installation in one machine according to this queue:
1) Installed the Oracle DB 11g
2) Installed the Enterprise and Database Server
3) Installed the Deployment Server and the installation finished successfully
But when i try to navigate to the EntepriseOne menu I have the following message:
"no local web solution for html engine installed. operation failed". Can you please suggest for any solution for this?
I also did not install the html web server yet. Is this mandatory? Is this error related with this?
Thank you and best regards

Hi Bruno
During installation I didn't enter any port, so could you please tell me if there is any default port for this isntallation.
I red on the internet that port 6010 is the default port for EnterpriseOne so I entered the url: http://192.168.223.167:6010/jde/E1Menu.maf
where this(192.168.223.167) is the IP of my server but still the page did not open.
Do I have to start any service or something. Please help me to solve this issue.
Thank you and best regards

After upgrading to OS X Yosemite, I keep getting popups asking for my "Local Items" keychain for cloudd, calendar, messenger and on and on...and then it wants me to change my password, only won't accept it when I do.

After upgrading to OS X Yosemite, I keep getting popups asking for my "Local Items" keychain for cloudd, calendar, messenger and on and on...and then it wants me to change my password, only won't accept it when I do.

There are several possible causes for this issue. Please take each of the following steps that you haven't already tried, testing after each one, until it's resolved. Back up all data before making any changes.
Step 1
Follow the directions in this support article.
Step 2
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select the iCloud keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password.
Select
          Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain.
Step 3
Open the iCloud preference pane and uncheck the Keychain box. You'll be prompted to delete the local iCloud keychain. Confirm. Then re-check the box. Follow one of the procedures described in this support article to set up iCloud Keychain on an additional device.
Step 4
Open the Keychains folder as in Step 1. There should be a file in that folder with the name "login.keychain". If there is also a file iwith the name "login_renamed_1.keychain", then please do as follows:
☞ Rename login.keychain to "login-old.keychain".
☞ Rename login_renamed_1.keychain to "login.keychain".
You can then close the folder.
Delete the login keychain from the keychain list in Keychain Access. Choose
           Delete References
when prompted, not Delete References & Files.
Select
          File ▹ Add Keychain...
from the menu bar. Add back the file now named "login.keychain". If any of your needed keychain items are missing from it, also add back the file now named "login-old.keychain". I suggest you transfer any needed items from that keychain to the login keychain, then delete it. The transfers are made by drag-and-drop in Keychain Access. You'll need to enter your password for each item transferred.
Run Keychain First Aid again. Quit Keychain Access.

Different SBA DNS SRV entry for the same dns zone?

Hello,
I got here a testlab with one enterprise pool and one sba deployed. The Branch Site got also an DNS Server installed. Both are using the same dns zone "test.com".
Of course now i got different server for the same SRV Record _sipinternaltls._tcp.test.com - one for autodiscovery in the enterprise pool and one for the sba. Also I want to add the second one as failover srv + the DNS Server in the Enterprise Pool should
be used as a Forwarder.
Now I got some issues how to deploy several entries on two different dns server for the same zone.
1.) If I add manually the same zone + DNS SRV entries on the SBA the dns is somehow not resolving/forwarding the entries on the other dns server in ee to other servers which are not on my SBA dns.
2.) If I only pinpoint the SRV entries for _sipinternaltls._tcp.test.com (one for sba and failover for ee site) the dns won't resolve the second a record to the enterprise pool.
What is the Best Practise for DNS SBA? Always point to the enterprise pool and, therefore, no other configuration is needed?
Regards DrWho

I played a little bit around. Problem was that I can not add the pinpoint dns srv entries via gui. Aditionally the tutorials did not work as my DNS server for SBA is not on a domain controller. In the end I did this:
sbafe -> fqdn of my sba
eefe -> fqdn of my frontend of enterprise pool
dnscmd . /zoneadd _sipinternaltls._tcp.test.com. /primary /file _sipinternaltls._tcp.test.com.dns
dnscmd . /recordadd _sipinternaltls._tcp.test.com. @ SRV 0 0 5061 sbafe.test.com.
dnscmd . /recordadd _sipinternaltls._tcp.test.com. @ SRV 10 0 5061 eefe.test.com.
dnscmd . /zoneadd sbafe.test.com. /primary /file sbafe.test.com.dns
dnscmd . /recordadd sip.sbafe.test.com. @ A 192.168.10.220
dnscmd . /zoneadd eefe.test.com. /primary /file eefe.test.com.dns
dnscmd . /recordadd sip.eefe.test.com. @ A 192.168.0.40
Question is if that is a good best proctise or should the dns server within a zone contain the same records (Primary/Backup). The Client will then always hit the FE of the EE Pool first.
Also its quite a lot of work to setup.

User License for Cisco CUCM 7.1.3

Hi
I need 30 unit license for Cisco Communication Manager 7.1. But I found that it's already end of sale.
I want the unit license part number for cisco cucm 7.1.3 version.
And i found revised part numbers for user license (CUCM-USR-LIC ) but those for 8,x versions. If i purchase that will it support in CUCM 7.1.3?
Thanks in advance.

Hi,
CUCM 7 is already end of sale.
CUCM 7.1.5 supports UCL.If we refer the ordering guide of CUCM 8.5, you can get UCL licenses [Basic/essential].
http://www.cisco.com/web/partners/downloads/partner/WWChannels/technology/ipc/downloads/UC_8_6_OG.pdf
What I think if u place the order , you should get the licenses and at the backened, it would be DLU.
You can also speak to Cisco SE for further clarity.
regds,
aman

Skype local calling number for new plymouth new ze...

hi can i please get a local skype number for new plymouth new zealand i brought a hastings one as it was 06 area code but its a toll call for me to call it

cdogg wrote:
hi can i please get a local skype number for new plymouth new zealand i brought a hastings one as it was 06 area code but its a toll call for me to call it
Hello
If your preferred location is not listed it means that Skype Numbers aren't available there.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Local SRV CVP for HA CUCM

Similar Messages

Maybe you are looking for