Local Storage cannot be enabled

Just yesterday, I started having problems with Adobe Flash Player 10 on my Vista computer. I use both IE and Firefox, and no matter which browser I use, I get the message that local storage has been disabled and I need to enable it. When I go to the Global Settings page to enable it, I am not allowed to check the box to enable the storage. I am told that Adobe is aware of this bug. It is named FP-1914. What can I do about this? I have tried downloading an older version of Flash Player, but I cannot figure out which file(s) I need to open to install it.
Sue

Hi, if you sent a screenshot it didn't come through because I think that feature has been disabled for a time.
I use all of the Settings and have not had any problem with any and have been able to set them. I use Windows and Windows Music Player.
Others that i have worked with and am currently working with have mentioned they can't access one of the Settings
Panel or even the site itself. However, it was due to not having the correct Flash Player installed, along with the correct
ActiveX Control whether IE or other browsers. Once their Flash Player was installed correctly then they had no problem
with any Settings.
I am not familiar with Pandora, but would only make this comment. Flash Player is a browser plug-in and sometimes
in users add ons there are some that will conflict with the browser itself, add ons conflicting with each other and conflict with the Flash ActiveX Control.
Perhaps an add on is conflicting with Pandora since it is Flash enabled as you say. Just mentioning a possibility.
Also you may want to make sure your Flash Player is installed correctly since sometimes with an Uninstall/Install one old file doesn't get removed.
Thanks,
eidnolb

Similar Messages

Adobe Flash Player 10 - Enable Local Storage Issue

Hi all,
Having and issue after upgrading to Flash Player 10 from 9.
Some chat room applications are indicating that they cannot run
since local storage is not enabled. If I log into the PC as the
domain admin everything works fine. If a regular user logs in, that
message appears. What has adobe changed in Flash Player 10 that I
need to update?
Thanks.

Me too!
On both IE8 and Firefox. Win 7 32 bit on IBM T42 - 1GB ram.
Old laptop I know but the 10.1.x.x Flash Players worked just fine. Problem started with 10.2.152.26 flash player.
Now BBC TV live and iPlayer work just fine, however YouTube does not - audio but no video. Just a black rectangle where the video should be.
Right click to get the menu and "settings" is greyed out. However select the pop-out option and the video plays. Right click on the pop-out and "settings" is available. So deselect "enable hardware acceleration", close the pop-out and refresh the window (F5) and now YouTube videos play. Switch hardware acceleration back on and now they don't.
This video works fine with hardware acceleration enabled. http://www.adobe.com/products/flashplayer/features/video/h264/
These also work. http://www.adobe.com/devnet/flashplayer/stagevideo.html
Something broken in 10.2, I think.

Local storage enabled per distributed-scheme

As the cache configuration xml allows you to specify local-storage true or falase for individual distributed-schemes it would seem that it is possible to have a stiuation where you have a cluster of nodes where each node is storage enabled for a different sub-set of caches/schemes.
I have never done this myself and always either storage enabled/disabled at the JVM level. Would having nodes with different caches/schemes storage enabled be a valid thing to do? I am not quite sure why I might want to do this but I was asked the question by one of our dev teams (I don't think they quite know they would want to do it either).
I suppose what I really want to know is has anyone done this before and if we did it is something likely to break?
Cheers,
JK.

Hi Jonathan,
yes, it is doable, only you usually would want to specify a different override Java property for the storage-enabled flag in each service scheme.
An example on when you want to do this is when there are different services storing data in (different) partitioned cache services (and usually they also have access to a database from a cache server, e.g. by a cache store) and you want to separate deployment of the server-side of the services to different nodes due to access control or provisioning reasons.
In these cases it is even possible that the server side of one service is the client side of another service, meaning that the cache configuration of both services need to exist in some JVMs.
I posted some additional info and configuration in this forum thread some months ago:
Re: Partitioned cache - where to put what config files?
Particularly look at the later posts in the thread
Best regards,
Robert
Edited by: robvarga on Dec 5, 2008 4:16 PM
Added link to forum thread.

Local storage is low but after i free up lots of space i still cannot install an app

I have tried to install the Fifa 13 app on my ipod but keep getting a message saying there is not enough available local storage.
I have deleted lots of other apps etc and my available storage is 4.1 GB but I still keep getting the same message when trying to download the app?
Any ideas as to what I should do next?

You are all almost there. Fifa 13 is 1.36 GB. It can take about three times the file download size to download/install an app. It seems you just need to free up a little more storage.

I am trying to download from iTunes, but getting message stating insufficient local storage. In usage screen says I have 19 GB left. Don't understand why I cannot download

I am trying to download from iTunes and getting message stating insufficient local storage. In usage screen, states I have 19 GB storage space. Pls help!!!!!

Jenniferwood2829 wrote:
... so I don't understand why I still get this message when I show I have 15GB available in iCloud?
It means you do not have enough Space on your Device and need to create More Space on Your Device by Deleting some items off your device.

I get a local storage request via Adobe flash which I cannot get rid of

When I open a video or audio site like the NPR media player http://www.npr.org/player/v2/mediaPlayer.html?action=2&t=1&islist=false&id=370394953&m=370394958&live=1 I get an Adobe Flash Player Settings request for Local storage. Clicking accept or deny doesn't do a doggone thing. I don't have the problem with Google Chrome, but I really prefer to use Firefox. I've had the problem with other sites beside NPR (National Public Radio's All Things Considered). It doesn't interfere with downloading, but it really does with the NPR player. My world won't end if you don't solve the problem, but it would be nice if you could. I live in the Philippines, so that might be a factor.
I use Windows 7 over a local (Globe Telecom) DSL network

See this page:
*http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html

Local Storage on IPad and Iphone is missing IOS7

Hi,
I have a Jquery Mobile app working fine in IOS6, upgrading to IO7 on the Ipad and Iphone the app is crashing when returning lists of data that previously worked. Our app works exclusivley with the local storage code in all modern browers allowing offline usage. Seems like the IOS7 upgrade is disrupting this somehow. I
cannot see the Local Storage icon in the web developerm, I am expecting this.
I can load around 40 list items into JqueryMobile, after that Safari crashes and the Wed Developer disappears. Any thoughts welcome.
Harvey

This appears to be a known bug , which is REALLY annoying me. Whoevers idea it was to disable cookies by default should be shot! I'm still fumbling around trying to get this going, but its not prooving easy...
http://stackoverflow.com/questions/20160499/enable-cookies-for-ios-7-in-phonegap -build

HT4191 iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad? If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account.

iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad? If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account. I've seen reference to the "My iPhone" local storage put no mention on how you create this folder or access this folder within the Notes app. I realize storing information in a local storage like this provides no syncing between other iDevices but that is exactly what I'm looking for. I'm running iOS7.0.4 on a iPhone 5S, and a iPad Air. Any help would be greatly appreciated.

If you go to Settings > Notes > Default Account you will see "On My iPhone" as the default account and the only choice if you have not enabled syncing Notes in Settings >iCloud or Settings > Mail, Contacts, Calendars. If you have enabled syncing you can still select "On My iPhone" as the default account. When you are in the Notes app you won't see any accounts listed if you have not enabled syncing because they are all in the On My iPhone account and that is the only place possible. It is not a folder that you create.

"error: thread-local storage not supported for this target"

I have a program that uses the __thread specifier, to be run on a Solaris 9/UltraSprac.
I am not able to compile it using gcc 3.4.4 or 4.0.4, it emits the msg "error: thread-local storage not supported for this target".
xz@gamera% gcc -v -Wall -D_REENTRANT -c -o func_stack.o func_stack.c
Reading specs from /opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/specs
Configured with: ../srcdir/configure --prefix=/opt/gcc/3.4.4 --disable-nls
Thread model: posix
gcc version 3.4.4
/opt/gcc/3.4.4/libexec/gcc/sparc-sun-solaris2.8/3.4.4/cc1 -quiet -v -D_REENTRANT -DMESS func_stack.c -quiet -dumpbase func_stack.c -mcpu=v7 -auxbase-strip func_stack.o -Wall -version -o /var/tmp//cc0poHSN.s
ignoring nonexistent directory "/usr/local/include"
ignoring nonexistent directory "/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/../../../../sparc-sun-solaris2.8/include"
#include "..." search starts here:
#include <...> search starts here:
/opt/gcc/3.4.4/include
/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/include
/usr/include
End of search list.
GNU C version 3.4.4 (sparc-sun-solaris2.8)
        compiled by GNU C version 3.4.4.
GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
func_stack.c:16: error: thread-local storage not supported for this target
func_stack.c:17: error: thread-local storage not supported for this target
func_stack.c:19: error: thread-local storage not supported for this target
xs@gamera% gcc -v -D_REENTRANT -c -o func_stack.o func_stack.c
Using built-in specs.
Target: sparc-sun-solaris2.9
Configured with: /net/clpt-v490-0/export/data/bldmstr/20070711_mars_gcc/src/configure --prefix=/usr/sfw --enable-shared --with-system-zlib --enable-checking=release --disable-libmudflap --enable-languages=c,c++ --enable-version-specific-runtime-libs --with-cpu=v9 --with-ld=/usr/ccs/bin/ld --without-gnu-ld
Thread model: posix
gcc version 4.0.4 (gccfss)
/pkg/gcc/4.0.4/bin/../libexec/gcc/sparc-sun-solaris2.9/4.0.4/cc1 -quiet -v -I. -iprefix /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/ -D__sparcv8 -D_REENTRANT -DMESS func_stack.c -quiet -dumpbase func_stack.c -mcpu=v9 -auxbase-strip func_stack.o -version -m32 -o /tmp/ccjsdswh.s -r /tmp/cc2w4ZRo.ir
ignoring nonexistent directory "/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/../../../../sparc-sun-solaris2.9/include"
ignoring nonexistent directory "/usr/local/include"
ignoring nonexistent directory "/usr/sfw/lib/gcc/sparc-sun-solaris2.9/4.0.4/include"
ignoring nonexistent directory "/usr/sfw/lib/../sparc-sun-solaris2.9/include"
#include "..." search starts here:
#include <...> search starts here:
/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/include
/usr/sfw/include
/usr/include
End of search list.
GNU C version 4.0.4 (gccfss) (sparc-sun-solaris2.9)
        compiled by GNU C version 4.0.4 (gccfss).
GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
func_stack.c:16: error: thread-local storage not supported for this target
func_stack.c:17: error: thread-local storage not supported for this target
func_stack.c:19: error: thread-local storage not supported for this targetJust as comparison, the corresponding output of compiling another file which does not have __thread declaration is as follows:
xz@gamera% gcc -v -Wall -D_REENTRANT -c -o common.o common.c
Reading specs from /opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/specs
Configured with: ../srcdir/configure --prefix=/opt/gcc/3.4.4 --disable-nls
Thread model: posix
gcc version 3.4.4
/opt/gcc/3.4.4/libexec/gcc/sparc-sun-solaris2.8/3.4.4/cc1 -quiet -v -D_REENTRANT -DMESS common.c -quiet -dumpbase common.c -mcpu=v7 -auxbase-strip common.o -Wall -version -o /var/tmp//cc4VxrLz.s
ignoring nonexistent directory "/usr/local/include"
ignoring nonexistent directory "/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/../../../../sparc-sun-solaris2.8/include"
#include "..." search starts here:
#include <...> search starts here:
/opt/gcc/3.4.4/include
/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/include
/usr/include
End of search list.
GNU C version 3.4.4 (sparc-sun-solaris2.8)
        compiled by GNU C version 3.4.4.
GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
/usr/ccs/bin/as -V -Qy -s -xarch=v8 -o common.o /var/tmp//cc4VxrLz.s
/usr/ccs/bin/as: Sun WorkShop 6 update 2 Compiler Common 6.2 Solaris_9_CBE 2001/04/02Note that the last 2 lines seem to suggest that a Sun assembler is used as the back-end of gcc. I am not sure whether the failure to compile the first file (with __thread) was due to the incompatibility of this Sun assembler. In the first case, the error msg was emitted before these 2 lines are printed.
I further read a post about gcc 3.3.3's inability to compile code that has __thread in it, on a HP-UX 11.11: http://forums12.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1216595175060+28353475&threadId=1148976 The conclusion seems to suggest that "the 2.17 GNU assembler did not support thread local storage" and gcc sees that and thus disallows TLS.
If the assembler is the culprit, then does anyone know whether this "Sun WorkShop 6 update 2" assembler in my installation can work with TLS? And how come a Sun assembler becomes the back-end of gcc? I read that gas (the GNU assembler) is the default backend of gcc. (How) can one specify the assembler to be used for gcc?
As an aside, I am able to compile my file on this same Solaris 9/UltraSparc platform using the Sun Studio 12 C Compiler:
xz@gamera% cc -V -# -D_REENTRANT -c -o func_stack.o func_stack.c
cc: Sun C 5.9 SunOS_sparc Patch 124867-01 2007/07/12
### Note: NLSPATH = /pkg/SUNWspro/12/prod/bin/../lib/locale/%L/LC_MESSAGES/%N.cat:/pkg/SUNWspro/12/prod/bin/../../lib/locale/%L/LC_MESSAGES/%N.cat
###     command line files and options (expanded):
### -c -D_REENTRANT -V func_stack.c -o func_stack.o
/pkg/SUNWspro/12/prod/bin/acomp -xldscope=global -i func_stack.c -y-fbe -y/pkg/SUNWspro/12/prod/bin/fbe -y-xarch=generic -y-xmemalign=8i -y-o -yfunc_stack.o -y-verbose -y-xthreadvar=no%dynamic -y-comdat -xdbggen=no%stabs+dwarf2+usedonly -V -D_REENTRANT -m32 -fparam_ir -Qy -D__SunOS_5_9 -D__SUNPRO_C=0x590 -D__SVR4 -D__sun -D__SunOS -D__unix -D__sparc -D__BUILTIN_VA_ARG_INCR -D__C99FEATURES__ -Xa -D__PRAGMA_REDEFINE_EXTNAME -Dunix -Dsun -Dsparc -D__RESTRICT -xc99=%all,no%lib -D__FLT_EVAL_METHOD__=0 -I/pkg/SUNWspro/12/prod/include/cc "-g/pkg/SUNWspro/12/prod/bin/cc -V -D_REENTRANT -c -o func_stack.o " -fsimple=0 -D__SUN_PREFETCH -destination_ir=yabe
acomp: Sun C 5.9 SunOS_sparc Patch 124867-01 2007/07/12Interestingly, the output no longer mentions the "/usr/ccs/bin/as: Sun WorkShop 6 update 2" assembler.

Just as another comparison, I compiled a file without __thread on the Solaris 9/UltraSparc platform using gcc 4.0.4. Not surprisingly it worked. But I no longer see the mention of the Sun assembler as in the case of gcc 3.4.4. Nor did I see the mention of "GNU assembler" as in the case of gcc 4.0.4/Solaris 10/x86. Instead, I saw something called "iropt" and "cg". Does anyone know what they are?
xz@gamera% gcc -v -Wall -D_REENTRANT -c -o common.o common.c
Using built-in specs.
Target: sparc-sun-solaris2.9
Configured with: /net/clpt-v490-0/export/data/bldmstr/20070711_mars_gcc/src/configure --prefix=/usr/sfw --enable-shared --with-system-zlib --enable-checking=release --disable-libmudflap --enable-languages=c,c++ --enable-version-specific-runtime-libs --with-cpu=v9 --with-ld=/usr/ccs/bin/ld --without-gnu-ld
Thread model: posix
gcc version 4.0.4 (gccfss)
/pkg/gcc/4.0.4/bin/../libexec/gcc/sparc-sun-solaris2.9/4.0.4/cc1 -quiet -v -iprefix /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/ -D__sparcv8 -D_REENTRANT -DMESS common.c -quiet -dumpbase common.c -mcpu=v9 -auxbase-strip common.o -Wall -version -m32 -o /tmp/ccSGJIDD.s -r /tmp/ccKuJz76.ir
ignoring nonexistent directory "/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/../../../../sparc-sun-solaris2.9/include"
ignoring nonexistent directory "/usr/local/include"
ignoring nonexistent directory "/usr/sfw/lib/gcc/sparc-sun-solaris2.9/4.0.4/include"
ignoring nonexistent directory "/usr/sfw/lib/../sparc-sun-solaris2.9/include"
#include "..." search starts here:
#include <...> search starts here:
/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/include
/usr/sfw/include
/usr/include
End of search list.
GNU C version 4.0.4 (gccfss) (sparc-sun-solaris2.9)
        compiled by GNU C version 4.0.4 (gccfss).
GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
/pkg/gcc/4.0.4/SUNW0scgfss/4.0.4/prod/bin/iropt -F -xarch=v8plus -xchip=generic -O1 -xvector=no -xbuiltin=%none -xcache=generic -Qy -h_gcc -o /tmp/ccUl4mVM.ircg /tmp/ccKuJz76.ir -N/dev/null -is /tmp/ccSGJIDD.s
/pkg/gcc/4.0.4/SUNW0scgfss/4.0.4/prod/bin/cg -Qy -xarch=v8plus -xchip=generic -OO0 -T3 -Qiselect-C0 -Qrm:newregman:coalescing=0 -xcode=abs32 -xcache=generic -xmemalign=8i -il /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4//gccbuiltins.il -xvector=no -xthreadvar=no%dynamic -xbuiltin=%none -Qassembler-ounrefsym=0 -Qiselect-T0 -Qassembler-I -Qassembler-U -comdat -h_gcc -is /tmp/ccSGJIDD.s -ir /tmp/ccUl4mVM.ircg -oo common.o

Live migration to HA failed leaving VHD on local storage and VM in cluster = Unsupported Cluster Configuration

Hi all
Fun one here, I've been moving non-HA VMs to a HA and everything has been working perfectly until now. All this is being performed on Hyper-V 2012R2, Windows Server 2012R2 and VMM 2012R2.
For some reason on the VMs failed the migration with an error 10608 "Cannot create or update a highly available virtual machine because Virtual Machine Manager could not locate or access Drive:\Folder" The odd thing is the drive\folder is
a local storage one and I selected a CSV in the migration wizard.
The net result is that the VM is half configured into the cluster but the VHD is still on local storage. Hence the "unsupported cluster configuration" error.
The question is how do I roll back? I either need to get the VM out of the cluster and back into a non-HA state or move the VHD onto the CSV. Not sure if the latter is really a option.
I've foolishly clicked "Ignore" on the repair so now I can't use the "undo" option (brain fade moment on my part).
Any help gratefully received as I'm a bit stuck with this.
Thanks
Rob

Hi Simar
Thanks for the advice, I've now got the VM back in a stable state and running HA.
Just to finish off the thread for future I did the following
- Shutdown the VM
- Remove the VM from the Failover Cluster Manager (as you say this did leave the VM configuration intact)
- I was unable to import the VM as per your instructions so I copied the VHD to another folder on the local storage and took a note of the VM configuration.
- Deleted the VM from VMM so this removed all the configuration details/old VHD.
- Built a new VM using the details I saved from the point above
- Copied the VHD into the new VMs folder and attached it to the VM.
- Started it up and reconfigured networking
- Use VMM to make the VM HA.
I believe I have found the reason for the initial error, it appears there was a empty folder in the Snapshot folder, probably from an old Checkpoint that hadn't cleaned up properly when it was deleted.
The system is up and running now so thanks again for the advice.
Rob

Adobe Flash FAIL: Adobe Flash Player local storage settings incorrect. Module 'Resume' feature may not work on this computer.

Using a Windows 2012 RDS Environment, we have users connecting to a CPD website, and as part of the CPD they need to run a systems checker. When they run the systems checker they get the following error message: "Adobe Flash FAIL: Adobe Flash Player local storage settings incorrect. Module 'Resume' feature may not work on this computer". All users are connecting to this environment with Windows CE Clients,I have checked the setting on Adobe Flash and they seem correct but as each user has its own profile on the RDS session, is there something that I should be setting for each user. I have added the website to the trusted sites and it has made no difference. Any ideas

It sounds like what's happening is that Flash Player can't write or read from the local shared objects in the user's redirected home directory because we disallow traversing junctions in the broker process. This behavior was disabled to address a vulnerability identified in some of John Forshaw's research into the IE broker last year.
You can enable this behavior by adding the following setting to mms.cfg:
EnableInsecureJunctionBehavior=1
That said, you can probably gather from the name of the flag that we don't really recommend this approach, and disable this attack surface by default. There's some risk that a network attacker could craft content that abuses fundamental issues with how Windows handles Junctions to write to arbitrary locations.
Unfortunately, there's not a simple or easy workaround that I'm aware of (but it's been ages since I've administered a Windows domain) for this kind of NAS/SAN-backed terminal server environment where Flash is not able to access \Users\<user>\AppData\Roaming\Macromedia\Flash Player\ without traversing a junction.

Mod_wl.so "Thread Local Storage" load error with Apache and WL 7

I'm using Apache 1.3 and WL 7.0, and after configuring Apache to load mod_wl.so,
I get the following error when starting up. I'm using the mod_wl.so that is
for hpux11.
Thanks for any help.
$ ./apachectl start
/usr/lib/dld.sl: Can't shl_load() a library containing Thread Local Storage: /usr/lib/libcl.2
/usr/lib/dld.sl: Exec format error
Syntax error on line 1053 of /opt/apache/etc/httpd.conf:
Cannot load /opt/apache/lib/modules/mod_wl.so into server: Exec format error
./apachectl start: httpd could not be started

Sunny,
When you build apache on hpux, you should do the following before the
configure:
export CFLAGS="-lstd -lstream -lCsup -lm -lcl -ldld"
Regards,
Eric
"Sunny Yee" <[email protected]> wrote in message
news:[email protected]..
>
I'm using Apache 1.3 and WL 7.0, and after configuring Apache to loadmod_wl.so,
I get the following error when starting up. I'm using the mod_wl.so thatis
for hpux11.
Thanks for any help.
$ ./apachectl start
/usr/lib/dld.sl: Can't shl_load() a library containing Thread LocalStorage: /usr/lib/libcl.2
/usr/lib/dld.sl: Exec format error
Syntax error on line 1053 of /opt/apache/etc/httpd.conf:
Cannot load /opt/apache/lib/modules/mod_wl.so into server: Exec formaterror
/apachectl start: httpd could not be started

Local Storage in SQL Server 2012 (Fast Track Appliance)

Hello,
Before procuring the Microsoft SQL Server 2012 Fast Track Appliance, we require additional information to satisfy the requirements from our infrastructure staff. What type of data is stored in the local storage? It seems that the local storage
may be used for computations functionality only (temporary tables etc?); therefore, the only system backups that we may need to perform are for the main server and spare server which also contains all computation nodes (each SQL Server 2012 instance running
on virtual machines?). In fact, we probably don’t need any backups since the spare server provides a fail-over mechanism and allows for our engineers to “repair” any issues on the problem server? Also, If all of our data is already on a separate system
outside of this data warehouse and can simply be exported back to the PDW system, then perhaps we don’t require backups? We simply use this data warehouse for analysis of the data (query and reporting). The data collection and maintenance are permanently
stored on a separate system.
One last question, if required – could we remove the local storage and replace it with our enterprise SANs? – likely a performance hit; however, may still be better than having to integrate separate hardware components to try to replicate the fast track
appliance and attempt to tune for performance. Our infrastructure policy requires the use of enterprise SANs and reduction in local storage (possibly from new data center consolidation policies).
Thank you for helping us to decide quickly and purchase this Fast Track Appliance expeditiously to meet our rapidly approaching deadline. I have been unable to find answers to these questions from Microsoft pre-sales and tech support staff (without
a support contract).
Thank you,
Vinh
703-727-5377

Hello,
Thank you for the question.
If the data in the local storage can be extracted from the PDW again, we don't need to backup them.
As for the storage replacement, technically speaking, you can replace the local storage with the different SANs. However, if you do so, you will lead the system to a nonsupport scenario.
Please refer http://msdn.microsoft.com/en-us/library/hh918452.aspx for further information.
If you cannot determine your answer here or on your own, consider opening a support case with us. Visit this link to see the various support options that are available to better meet your needs:
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
Regards,

ICloud - Email Storage - cannot be deleted

iCloud - Email Storage - cannot be deleted
Guys,
please, can anybody help me how to delete 1.8 GB in iCloud.com?
I do not have any emails there - really nothing.
But it still says that I have 1.8 GB of data.
I tried to connect to iCloud Email via iPhone and iPad, but still nothing -> no emails there, but still 1.8 GB. :-(
Thanks.
<Link Edited By Host>

Quit Mail
Go to your User's Library How to enable the User’s Library folder
Scroll down to the Mail folder
In V2 > MailData do you see Accounts.plist
Verify permissions by doing a Get Info.
You(me) Read & Write
Staff Read only
Everyone Read only
If yes, try renaming this file as AccountsOLD.plist
Log out under the Apple in the Menu bar
Log in and lauch Mail.
Do you still see your accounts? If yes, can you delete the gmail account now?
Repair Permissions might help.
1. Open Disk Utility in your Applications/Utility folder.
2. Click on the First Aid tab and select Repair Permissions
3. Click on the icon for your boot volume.
4. Click the repair permissions button.

Local storage issue

I cannot update my apps at it says not enough local storage. I purchased more storage on the iCloud. What can I do to be allowed to be able update/ download apps?

aineburke wrote:
I cannot update my apps at it says not enough local storage. ...
Is this what you mean...
'Not enough free space' alert when trying to sync

Local Storage cannot be enabled

Similar Messages

Maybe you are looking for