Local, Testing server, Remote server uploading
I have my web files in a local directory, say c:
webfiles\myweb. I also have a local testing server at
c:\Apache\htdocs\myweb, and finally a production site at
www.myweb.com. The problem is that when I edit a file in my local
directory it updated the testing server and not the production
remote - which is what I expect. My problem is that I don't know
how to update the production server as there does not seem to be
any menu choice for this. I am sure I am doing something stupid,
but I can't figure out whats wrong. Basically I don't quite get how
the relationship between the 3 file locations interact with each
other. Any help would be sincerely appreciated as its driving me
crazy.
Expand the Files panel. On the toolbar, there are three icons
in a row -
Remote | Testing | Site Map. Select the Remote icon, and you
will now be
connecting with the Remote site for PUT/GET. The testing
server will now
only be used for Previews or Live Data displays.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"johnbreda" <[email protected]> wrote in
message
news:f2sahm$r4g$[email protected]..
>I have my web files in a local directory, say c:
webfiles\myweb. I also
>have a
> local testing server at c:\Apache\htdocs\myweb, and
finally a production
> site
> at www.myweb.com. The problem is that when I edit a file
in my local
> directory
> it updated the testing server and not the production
remote - which is
> what I
> expect. My problem is that I don't know how to update
the production
> server as
> there does not seem to be any menu choice for this. I am
sure I am doing
> something stupid, but I can't figure out whats wrong.
Basically I don't
> quite
> get how the relationship between the 3 file locations
interact with each
> other.
> Any help would be sincerely appreciated as its driving
me crazy.
>
Similar Messages
-
Slideshow works on local but not remote server?
Slideshow works on local but not remote server? The site is patriceclarkson.com.
When I compare your:
http://www.warpd.ca/SpryAssets/SpryWidget.js
to this one:
http://labs.adobe.com/technologies/spry/ui/includes/SpryWidget.js
I do not see the same file. Try uploading the correct file and check again.
Xav -
How to set synchronise to test or remote server
I can't see which remote server will be synchronised in CS3.
I have set up a site with a test and remote server.
Local files are held locally, the test server is inhouse on an apache server, and the remote server is the actual webspace account.
I can synchronise the local files to either the test or remote server, but its not clear which remote is currently set for the synchronisation. The way I;ve found so far is to select the remote or test view on the dropdown, and whichever was the last selected will synchronise with the local files. This will eventually lead to a wrong update!
Is there a way to set or see which remote will be used to synchronise?
Thanks
LenWIt is true that this is VERY badly documented, if at all.
To summarize what many want to do (and for good reason):
1) Developers PC. Running Dreamweaver and has the local site defined on it. No database, no server.
2) Testing PC/Server. Running web and database servers on the local network. Typically Apache, MySQL and PHP
3) Production Server. Out on the net somewhere.
After this is all set up, here are the problems that one encounters:
- When editing "normal" HTML it is fine. You edit, click test, and it saves and copies it to the test server and displays it. When done, do a "put" or "sync" and it goes to your remote site.
- If you are editing some PHP or CSS that is not directly in the HTML page, you are screwed. Hit test, and it saves and displays your HTML page, but your new PHP or CSS code is STILL ON YOUR LOCAL MACHINE ONLY!
- If you are constantly fine tuning PHP or CSS code, you might as well just keep a file manager window open and manually copy things around. DW just seems unable to do it.
Of course if you want to put everything on your development PC (LAMP, XAMPP whatever), you don't hit these problems. But who wants all that crap running on your day to day machine? The testing server is a much more professional setup. And it gives you yet another free backup of your stuff. Trash an important HTML file? Just pull it back from testing server. No need to dig through backups.
You can really never be sure what DW is going to synchronize. I only use it to PUT things to the remote production server, which seems to normally work fine. How to best keep the testing server in sync with your PC is not clear at all.
I've seen a few suggestions, but Adobe really needs to document how to run DW in a professional fashion, not like a toy tool!
Paul -
Unable to upload files from local computer to remote server (Was: Dreamweaver)
I have lost the connection between the remote location and the local location for files on my computer. Where to I correct this issues, since I cannot upload files from local to remote. Host server from server to my computer works fine, Running Dell computerr XP operating system with CS3 Dreamweaver. Need all the help I can get.
I am now having a "ftp error - cannot make connection to host. Dreamweaver
encoutered a netwoerk or file system error. I did as you suggested and I
get to basic site definition, ( which looks o.k.), next screen ( no,I do
not want to use a server technology) Next screen ( edit local copies on my
machine ( file location looks o.k.), next screen (connect to remote
server=ftp) address of web server is correct, ( no folder on server, or ftp
login or ftp password) do not enable check in or check out
summary: local
Site name:midhba
local root folder:midhba
remote info:
access; ftp
FTP host: midhba.com
check in.check out diabled
testing server (set up later) -
Flash movie won't play on testing or remote server in web page
I have a Flash slideshow that will only play in a browser if I click File > Open and open the .swf file locally and directly (not in a web page). It has never played in a webpage, remotely on the web server or locally on the Wamp server. It plays correctly in Flash when I test it.
I have tried uploading the HTML page that Flash generates (without any changes), and it won't even play in that file. I have also tried using Dreamweaver's "Insert Flash" feature, and that was no good either.
Here is the direct link to the .swf:
http://www.farrelldoc.com/glw/greenlilysample.swf
Here is the page that Flash generated:
http://www.farrelldoc.com/glw/greenlilysample.html
Here is the page I created using Insert Flash:
http://www.farrelldoc.com/glw/home.php
Any help is greatly appreciated! I have a demo tomorrow, and I just have to get this figured out. I'm at the end of my rope!
Thanks so much!
KarenNo, unfortunately, that didn't work.
BTW, I had to move the files because I now have a 500 error on the original directory due to my first attempt at installing CMS. (I will be getting my money back for that software.) Here is the location of the new stuff:
Here is the direct link to the .swf:
http://www.farrelldoc.com/gle/greenlilysample.swf
Here is the page that Flash generated:
http://www.farrelldoc.com/gle/greenlilysample.html
Here is the page I created using Insert Flash:
http://www.farrelldoc.com/gle/home.php -
Get Local Files on Remote server
Hello,
We have a project where each computer in our office will have
different files in a folder on their local computer named
C:\Scanned. We would like to keep up with what is in each directory
and put it in the database on the remote server. We have it all
working on a single local machine but on the server we cannot
access a folder on the connecting pc. We also don't want to install
coldfusion on every one of the machines just to access the local
directory for each of them.
Is there a way to use cfdirectory to view a local directory
on the persons pc but not on the server?
<cfdirectory directory="C:\Scanned\" action="list"
name="myImages" sort="name ASC" recurse="yes">
If there is no way to do it cfdirectory please let me know
how it can be done.
Thanks,
AndrewTurboNut wrote:
> Hello,
>
> We have a project where each computer in our office will
have different files
> in a folder on their local computer named C:\Scanned. We
would like to keep up
> with what is in each directory and put it in the
database on the remote server.
> We have it all working on a single local machine but on
the server we cannot
> access a folder on the connecting pc.
Thank goodness. Just imagine what could happen if any website
you
visited could just start snooping around the file system of
your local,
client PC. Scary stuff that.
> We also don't want to install coldfusion
> on every one of the machines just to access the local
directory for each of
> them.
>
> Is there a way to use cfdirectory to view a local
directory on the persons pc
> but not on the server?
>
*IF* all the client PC's are on a well defined local|wide
area network.
And you want to create a domain user that can read all the
file
systems on all these computers. Then ColdFusion can be
configured to
run under that user. It would then have access to the desire
directories.
You would use UNC paths in the <cfdirectory...> tag,
which means you
will have to know the machine names of all these PCs and it
would look
like:
<cfdirectory
directory="\\{machineName}\c$\Scanned\"...>
But this is really not the job for a Web Application Server. -
How to connect a remote server in my local pc?.
I have a code to connect my server in visual basic 6.0 code, my sap version is 2007 A.
Private Sub ConnectToCompany()
'// Initialize the Company Object.
'// Create a new company object
Set oCompany = New SAPbobsCOM.Company
'// Set the mandatory properties for the connection to the database.
'// To use a remote Db Server enter his name instead of the string "(local)"
'// This string is used to work on a DB installed on your local machine
oCompany.Server = "(local)"
oCompany.language = ln_English
'// Use Windows authentication for database server.
'// True for NT server authentication,
'// False for database server authentication.
oCompany.UseTrusted = True
ChooseCompany.Show vbModal, Me
End Sub
but I want to connect my remote server and I didn't. Do i forgeting something??... I changed "(local)" for my name remote server or my local Ip for remote server. But maybe my user name windows for autentication. there is Someone who can help me please. Which one is the correct data I need??hello freind
i think yu are missing company usernsme,password,db type like this code
private void Connect()
try
Cursor = System.Windows.Forms.Cursors.WaitCursor;//Change mouse cursor
oCompany = new SAPbobsCOM.Company();
oCompany.DbServerType = (SAPbobsCOM.BoDataServerTypes.dst_MSSQL2008);
oCompany.Server = Properties.Settings.Default.ServerName.ToString();// change to your company server
oCompany.language = SAPbobsCOM.BoSuppLangs.ln_English; // change to your language
oCompany.UseTrusted = false;
oCompany.DbUserName = Properties.Settings.Default.UserID.ToString();
oCompany.DbPassword = Properties.Settings.Default.Password.ToString();
// Set connection properties
oCompany.UserName = txtUSer.Text;
oCompany.Password = txtPassword.Text;
oCompany.CompanyDB = Properties.Settings.Default.DatabaseName.ToString();
//Try to connect
lRetCode = oCompany.Connect();
if (lRetCode != 0) // if the connection failed
int temp_int = lErrCode;
string temp_string = sErrMsg;
oCompany.GetLastError(out temp_int, out temp_string);
// u.action_status("Connection Failed - " + temp_string, this);
if (oCompany.Connected) // if connected
this.Text = this.Text + " - Connected to " + oCompany.CompanyDB;
CheckUser();
Cursor = System.Windows.Forms.Cursors.Default; //Change mouse cursor
catch (Exception) -
Progressive Flash Not playing properly from remote server
I have Flash CS3.
PROBLEM: I've encoded a video using Flash's CS3 "Progressive
Download" option and then uploaded the resulting video (along with
it's associated files created by Flash ie: .fla, .swf, script
folder with action script, etc.) to my server (webpage and video
was created through Dreamweaver CS3).
RESULT: A flash video that plays on the web, but has pink
colored digital boxes that breakup the picture... poor quality.
Please follow this link for an example:
http://rivhawk.tripod.com/index.html
I've watched multiple step-by-step tutorials by Adobe for
creating and uploading Flash video, both with Flash CS3 and even
Dreamweaver CS3. I've tested by creating the flash content in Flash
CS3 and directly through Dreamweaver. The same digital noise, pink
blocks occured.
NOTE: Before uploading the flash content and associated
files, I tested the flash video in my browser through Dreamweaver
(from my local directory, not remote server)...and it
plays/operates perfectly. It's only once it's uploaded that the
problem occurs.
I've encoded the video with Flash 8 and Flash 9 at low,
medium and high qualities...same results (even by different
computers accessing the content on the internet). It happens in
Firefox and Internet Explorer.
After 3 days of tests and research (and viewing samples of
other beautiful progressive download videos on the internet) I'm
wondering if I am missing something very simple, if there is a bug,
is this a known issue etc.
Please help, and please understand that I've been through all
the tutorials on creating/using Flash Video...and specifically
using the Progressive Download option for use on remote servers
that don't have the Flash Media Server.
Please assist.> Hi, I am very new to the video thing. I created a Flash
swf that plays an
> flv
> file and everything works fine when I upload the swf and
the flv file to
> the
> same directory on our web server. We'd like other web
sites to be able to
> place
> this video on their site, but we do not want to give
them the actual
> files,
> rather have the video files pull from our server.
You can play video from any server by using a full URL ie
http://www.anotherdomain.com/flashvideo.flv
<param name="movie" value="videos/rep.swf" />
Looks like you're building an FLV player in Flash to play
your video rather
than embedding it using DW. If so you need to open the source
FLA you used
to generate 'rep.swf' and insert a full URL to your flv file,
then publish
the swf and upload again.
> I've tried changing the value and embed source tags to
be complete urls
> referencing the actual video location, but I still get
an error saying the
> flv
> file cannot be found. Is there a way to do what I'm
requesting?
As above, or you can just embed the video on a web page in
DW, using a full
URL to your flv. If your flvs are on a server and you are
connected to the
internet, you should be able to play the flv using preview in
browser before
uploading the page. -
A remote server runs code terribley slow
Hello,
I'm in an odd development situation. I write code on my local
dev server, which gets handed off to someone else's dev server that
tests it before putting it up live. I have NO direct access to the
remote servers and upload my files by emailing them over
individually with instructions on where to place them. (I warned
you it was odd).
I've written a small search page which does the following:
does a verity search, if a result is not cached then the file is
parsed then the information is cached. It sorts the results, then
displays them. It caches by serializing a struct of structs using
wddx.
On my local server this works almost instantaneously,
literally half a second for the largest "all" search, but on the
remote server it TIMES OUT! Doing searches (that run near instantly
locally) for less items takes upwards of 2 full minutes.
The error that coldfusion throws is that cffile write is
timing out. (It rewrites the cache if it finds new files in the
results).
The code is identical on both my local, and the remote
server.
I'm a little clueless as to why this is happening, and my
background has never been in coldfusion before. If anyone could
shed any light on why this is happening, or where to look to figure
out why it's happening, it would be greatly appreciated!
Thank you so much for any help you can give.Kronin, you bring up a good point, and that has been the main
focus I've had so far. In my local environment I am searching
through roughly 1100 files. The Cache file i'm making comes out to
about 800KB. In the remote environment I'm only searching through
roughly 2000 files, and I am assuming that the cache is growing at
the same rate.
These aren't terribly big numbers I'm working with, even the
oldest hardware should be able to pull this off without a hitch.
Even if cffile loads it into memory first, there would surely be
1MB of memory available, and if not a swap shouldn't take long
enough to cause a time out.
Keep the ideas coming though :) -
Good evening,
I have my db loaded, phpmyadmin loaded all on my remote server, went in the phpmyadmin and created my table, now I am in dreamwever cs4 and want to conn to my db
on server tab I put
' mysqlXX.webcontrolcenter.com ' (where XX is my server #),
but i keep getting "an unidenfied error occour"thats all.
Any ideas or is there something I am missing, Thxok, but answer this to me, if I used phpmyadmin on my remote site which my host set up, and gave me my server addy for mysql. I went on line and to my phpmyadmin set up my table users. Now in dreamweaver my site is defined, local, testing, and remote. I now make a connection to mysql, click the plus and then mysql connection, dialog box comes up, I put conn name in, host addy (from my hoster), username and pw from when I set up phpmyadmin on the remote server, click test and works, check out the table users and all the info is now in dreamweaver, how did it get that info if not getting from remote? thx
-
Unable to update webpages onto remote server
Whenever I upload my updated webpages onto remote FTP server, remote server does not update my webpages, even though I synchronize them and refresh webpage contents. Please, help me solve this problem ASAP!
Have you set up the remote / transfer settings correctly, see -
http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WScbb6b82af5544594822510a94ae8d65-7f62a .html
Also ensure the files are not cloaked in the preferences menu: edit - preferences - cloaking.
PZ -
I installed Exchange Server 2010 inside my VMWare Windows Server 2008 Ent R2. And After successful installation when I try to open my Exchange Server Console, I am getting the following error message. I am very new to Exchange server please help me
to solve this problem.
Initialization Failed
The following error occurred while searching for the on-premises Exchange server:
[win-.local] Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError
$true -CurrentVersion 'Version 14.1 (Build 218.15)''.
Thanks Vivek
SharePoint Foundation 2010 Book
http://www.redpipit.comHi,
Please have a look at the article below:
Troubleshooting Exchange 2010 Management Tools startup issues
http://blogs.technet.com/b/exchange/archive/2010/02/04/3409289.aspx
Resolving WinRM errors and Exchange 2010 Management tools startup failures
http://blogs.technet.com/b/exchange/archive/2010/12/07/3411644.aspx
Besides, please run the cmdlet below:
set-user alias -remotepowershellenabled$true
Xiu Zhang
TechNet Community Support -
Error testing locally; works fine on remote server
I was about to post that I'd hit an error when trying to
create a
conditional region in DW 8 with ASP, CF & PHP: Training
from the Source.
Rather than paste the non-PHP code, I uploaded the page to my
remote server.
When I browsed to the link, the error wasn't there.
I inserted the code for the conditional region just before
the opening
<form> tag, as the book instructed (Lesson 6).
<?
if ($_GET['error'] == "notnumeric")
echo "<p>*** Error! One or more fields was left blank
or contained a
non-numeric character.</p>";
?>
When I preview locally, the page appears correctly, but with
the following
message before the form:
Notice: Undefined index: error in C:\Program Files\Apache
Group\Apache2\htdocs\newland\Lesson06\Start\newland-php\tourprice.php
on
line 27
Line 27 is where the "if" statement starts.
On my remote server, everything works as it should:
http://www.feathertheweb.com/newland/Lesson06/Start/newland-php/tourprice.php
Any help is appreciated.
Thanks,
HeatherSo, I changed the code you had provided and that worked. Now,
I've tested
the form and when I click "submit," I get this:
Notice: Undefined index: nmChildren in C:\Program
Files\Apache
Group\Apache2\htdocs\newland\Lesson06\Start\newland-php\tourprice_processor.php
on line 2
Warning: Cannot modify header information - headers already
sent by (output
started at C:\Program Files\Apache
Group\Apache2\htdocs\newland\Lesson06\Start\newland-php\tourprice_processor.php:2)
in C:\Program Files\Apache
Group\Apache2\htdocs\newland\Lesson06\Start\newland-php\tourprice_processor.php
on line 4
I'm guessing it's related to the change I made in
tourprice.php. I tried to
figure out what needed to be changed in
tourprice_processor.php based on
that change, but I'm still pretty new at this and really
wasn't sure.
Below is the code from tourprice_processor.php:
<?php
if (is_numeric($_POST['numAdults']) == false or
is_numeric($_POST['nmChildren']) == false)
header("Location: tourprice.php?error=notnumeric");
exit;
?>
<?php
$numAdult = $_POST['numAdults'];
$numChild = $_POST['numChildren'];
$basePrice = $_POST['tourName'];
$tourPrice = ($numAdult * $basePrice) + ($numChild *
$basePrice);
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<title>Newland Tours: Tour Price
Calculator</title>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<link href="css/newland.css" rel="stylesheet"
type="text/css" /></head>
<body>
<a href="#top"><img src="images/spacer.gif"
alt="Skip to main page content"
width="1" height="1" border="0" align="left" /></a>
<table width="750" border="0" cellpadding="3"
cellspacing="0">
<tr>
<td><img src="images/banner_left.gif" width="451"
height="68" alt="Newland
Tours Banner, Left." /></td>
<td width="280"><img src="images/banner_right.jpg"
width="276" height="68"
alt="Newland Tour Banner, Right." /></td>
</tr>
<tr>
<td><img src="images/navbar.gif" name="navbar"
width="450" height="20"
border="0" usemap="#navbarMap" alt="Navigation Bar."
/></td>
<td><img name="copyright_bar"
src="images/copyright_bar.gif" width="272"
height="20" border="0" alt="Copyright 2006 Newland Tours."
/></td>
</tr>
<tr>
<td colspan="2">
<h1><br />
<a name="top" id="top"></a>Tour Price
Calculator</h1>
<p>The estimated cost of your tour is
<strong><?php echo
'$'.number_format($tourPrice, 2);
?></strong>.</p>
<p>Prices include hotel, accommodation, and travel
expenses during the
tour. They
do not include airfare to the starting
destination.</p>
<p><a href="tourprice.php">Calculate</a>
another tour.</p>
<p><a href="contact.php">Contact</a> one
of our qualified agents.</p>
</td>
</tr>
</table>
<br />
<map name="navbarMap" id="navbarMap">
<area shape="rect" coords="1,0,62,20" href="index.php"
alt="Home" />
<area shape="rect" coords="71,0,117,20" href="about.php"
alt="About" />
<area shape="rect" coords="129,0,196,20" href="tours.php"
alt="Find Tours"
/>
<area shape="rect" coords="209,0,311,20"
href="profiles.php" alt="Country
Profiles" />
<area shape="rect" coords="327,0,434,20"
href="contact.php" alt="Contact An
Agent" />
</map>
</body>
</html>
Heather
"David Powers" <[email protected]> wrote in message
news:[email protected]...
> Heather wrote:
>> I inserted the code for the conditional region just
before the opening
>> <form> tag, as the book instructed (Lesson 6).
>>
>> <?
>> if ($_GET['error'] == "notnumeric")
>>
>> When I preview locally, the page appears correctly,
but with the
>> following message before the form:
>>
>> Notice: Undefined index: error in C:\Program
Files\Apache
>
> It's badly written code. It should be
>
> if (isset($_GET['error']) && $_GET['error'] ==
"notnumeric")
>
>> On my remote server, everything works as it should:
>
> That's because your remote server has been configured to
suppress PHP
> notices.
>
> PHP notices alert you to non-fatal mistakes in coding. A
lot of people
> just ignore them, but it's a sloppy habit to get into,
because it can lay
> your scripts open to attack. Before testing the value of
a variable, you
> should always use isset() to check that the variable has
been defined in
> the first place.
>
>
http://www.php.net/manual/en/function.isset.php
>
> --
> David Powers
> Author, "Foundation PHP for Dreamweaver 8" (friends of
ED)
> Author, "Foundation PHP 5 for Flash" (friends of ED)
>
http://foundationphp.com/ -
Checklist for making transition from local testing server to remote
Does anyone know of any resources which take one through the necessary steps required in putting an ADDT-built site to a remote server? I test on XAMPP (basic) and am dreading the errors I will discover when I actually put one of these sites to server...
It all depends on waht you are going to do with the data on the remote.
if tehre are no updates there, creating a simple materialized view on the remote to pull it's data from the local should suffice.
If there are updates on the remote, you will more than likely want to look into either Multi-master replication, or updatable materialized views. -
Help with Server Structure and File Identification / Test vs Remote vs Local
I inherited a website at a new job. I have 0 experience with building websites, let alone DW and have only been through the beginning tutorial. I feel I am ready to make my first edits to the website.
We have two servers, test and remote. I have files saved in C: under wamp folder. When I am connected to test server, the folder structure doesnt change, but the folders turn red. If the folders are not red, I am working from the local file? If the folders turn red, I am working from the Testing Server copy? And if so with the red folders, why is the file path still the same, C:\wamp etc...?
Thanks -
JohnSounds about right.
I have my local site folder inside WAMP/www/ so when I save local files in DW, they're immediately saved in the testing server. This also allows me to see parsed content in Live View or Live Code.
Nancy O.
Maybe you are looking for
-
I have a problem with my 4s camera which has come up recently. Everytime I take a picture and look it up via the 'Photos' app, it shows as blank. But when I click on edit on the blank picture, it comes up and I am able to save it back on my photo alb
-
RAID Admin reality check -- this software needs serious work
Folks: This is a combination rant about RAID Admin 1.5 (on OSX 10.3.9) and plea for any suggestions for things I may have missed. RAID Admin -- an utterly crucial tool for responsibly administering an X Serve RAID, itself offered for use in mission c
-
Accessing BPEL Variables in XSLT
Hi All, In a BPEL PM process I need to be able to access a global BPEL process variable in the XSL transformation. When I use any functions in the "Transform" activity I do not see the BPEL variables in scope. Any idea on how can this can be done ? R
-
IPhone 4 shut off, now getting an error 28 when trying to reload.
My iPhone4 screen scambled and shut off tonight while playing Words with Friends, and now it will not turn back on. When trying to reload via iTunes, I get an error 28. Phone has never been dropped, or had probs previously. 1 Year warranty ended last
-
Hi there, what application do I need to view .ashx files? Is that shockwave?