Local transaction types and Backend PO types

We are using SRM 6.0 using Ext Classic. We are taking External requirements from R3 (purchase requisitions) and creating POs in SRM.
Our problem is the following.
We want to create four different document types of POs (ZPO, ZCS, ZIA, ZAD). The problem is that when we are creating the purchase order from the external reqt (through sourcing hub), we select the document type ZCS or ZIA or ZAD but SRM always creates ZPO locally and in R/3..
Our question is: How can we create the PO according to the user's selection of transaction type and make sure that the correct PO type is created locally and in the backend. We have maintained all four transaction types in attribute BSA and also in R/3.
Thanks!
-Bakulesh

Yes. DP_PROC_TY is meant for manual creation PO.
and you can specify the doc types desired for the PO.
Also please check that you have specified the internal no ranges for these doc types
and they lie in the range of the external no range you will define in the back end PO no range interval
and specify as external no range in ECC PO doc type.
BR
Dinesh

Similar Messages

  • About value type and key figure type

    Hello Gurus,
              please explan the different usage of about value type and key figure type.  what is the typical values for both infoobjects ?
    Many thanks,
    Frank

    Hi,
    0METYPE is a key figure-specific info object usually used to define semantics of the individual business key figures in BW (for example, actual, commitment, plan, target values).
    Its a bi specific field which is filled from extract structure field named MEASTYPE table COSR
    Refer to OSS Note 523742 for how it is filled and the following link for additiona information.
    http://help.sap.com/saphelp_nw70/helpdata/en/91/ddd52b9ef30645a338e28aae443807/frameset.htm
    Note 523742 - BCT-CO: BW key figure model and R/3 tables for trans. data
    This note provides information on the key figure model in the area of BW Content CO-OM. It also gives an overview of the DataSources for transaction data and the corresponding source tables and value fields in the R/3 System.
    The key figure model for currency fields in the area of CO-OM contents affects the following info object of type key figure:
    0AMOUNT Amount
    The key figure itself does have any business semantics.
    The semantics of the individual business key figures in BW (for example, actual, commitment, plan, target values) is determined using combinations of values for the following key figure-specific info objects (see also the account model in SEM-BPS, note 407563):
    0METYPE Key figure type
    0VTYPE Value type for reporting
    --> 0VTDETL Details of the value type
    --> 0VTSTAT Statistics indicator for the value type.
    For example, using transaction SE16, the possible characteristics of the values of this InfoObject can be taken from the above-mentioned master data tables in R/3.
    The business key figures on the InfoCubes of the standard BW content were defined as restricted key figures using this semantics of the key-figure-specific characteristics.
    The conversion of the R/3 transaction data in the BW key figure model is carried out in the extractors using the ROMI_GET_VTYPE_AND_DETAIL function module. It primarily happens using the specified conversion tables.
    The following dependencies exist for the source tables of the DataSources:
    COSP_VTYPE for COSS, COSP, COVP,
    COSB_VTYPE for COSB,
    BPXX_VTYPE for BPGE, BPJA, BPEE
    If an R/3 source record cannot be converted using these tables, it may not be extracted to BW.The application log of the R/3 DataSource transaction RSA3 contains entries for the unconverted values after the test run.(The log function for the CO-OM DataSources was considerably improved by the correction for note 523655).
    The application log for the extraction runs from BW can be evaluated using transaction SLG1 (Object: RSAP, object information: RSAP_INFO)
    Furthermore, the semantics of a key figure are still determined by the time characteristics and the following key-figure-specific info objects:
    0CURTYPE Currency type (for more information, see note 517909),
    0DB_CR_IND Debit/credit indicator (for more information, see note 065075),
    0VERSION CO version
    -Vikram

  • Sap notes for 103 movement type and 105 movement types in sap

    Hi all,
    Please let me know if there are any sap notes for 103 movement type and 105 movement type in sap as soon as possible
    points will be awarded.
    thanking u in advance,
    srinivas.

    There are many SAP notes related to these movement types e.g 514609,750836,
    533833, 808029, 317823,etc.
    You can search them at http://service.sap.com
    Regards,
    Amit

  • Urgent - Idoc type and the Message type

    Hello
    Its very urgent. I want to know the basic idoc type and the message type used for EDI 894 transmission (Delivery / Return Base Record). Please respond at the earliest.
    Thanks in advance

    HI
    Pratibha
    How are you ?
    Please check the below links:
    http://scn.sap.com/thread/990524
    http://www.erpgreat.com/pm003.htm
    http://scn.sap.com/thread/1386811
    http://scn.sap.com/thread/1078741http://www.erpgreat.com/plant/what-is-equipment-master.htm
    http://benxbrain.com/en/index.do?onInputProcessing%28brai_object_thread%29&001_threadid=0000835100&001_boardtype=01&sysid=PI1&pgmid=R3TR&object=TABL&obj_name=EQBS&child_param=
    Mutti

  • Function module related to procurement type and special procurement type

    Hi Gurus,
    Is there any function module related to procurement type and special procurement type?
    Regards
    Rajib

    Dear Rajib,
    What is your exact requirment?do you want to find out the list of materials based on procurement type
    and special procurement type?
    You can get the details from the table MARC.
    Regards
    Mangalraj.S

  • Storage unit types and storage bin types  - Need

    Hi,
    i want to know what is the use of the storage unit type and storage bin type.
    thanks,
    Maxx

    Dear Maxx,
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/c6/f844694afa11d182b90000e829fbfe/frameset.htm
    Storage Bin:
    A storage type generally contains several storage spaces or slots. These are called storage bins in Warehouse Management (WM). The storage bin is the smallest available unit of space in a warehouse. The storage bin therefore describes the position in the warehouse where the goods are or can be stored.
    Since the address of a storage bin is frequently derived from a coordinate system, a storage bin is often referred to as a coordinate. The coordinate 01-02-03 for example, can refer to a storage bin in row 1, stack 2, and level 3.
    You assign each storage bin to a specific warehouse number and storage type according to its location. You must also assign each storage bin to a storage section.
    You can also define the following additional characteristics of a storage bin:
    Maximum weight
    Total capacity
    Fire containment section
    Storage bin type (for example, for small or large pallets)
    With certain stock placement strategies, the storage bin type plays a significant role in optimizing the automatic search for a storage bin in connection with the pallet type. For example, you can define the WM putaway strategy to place large industrial pallets into a specific large bin type and smaller pallets into small bins.
    Storage Unit:
    In the system, a storage unit record consists of a header and at least one material data record (quant data record).
    The header contains information which is relevant for the entire storage unit and includes the:
    Storage unit number
    Storage unit type (SUT) of the storage unit
    Storage bin in which the storage unit is currently located
    Status, which provides current information about the storage unit
    Specific information about the stock contained in a storage unit is found in the material data record. The material record is already familiar to you in the existing system as a quant data record. For SU management, this information can be managed at the storage unit level.
    The following graphics illustrate how WM handles storage bins with and without the use of storage unit management. For these examples, storage bins are displayed in which 200 boxes of red pencils and 50 boxes of blue pencils are stored. The stock is distributed on two pallets.
    Hope this will help.
    Regards,
    Naveen.

  • Settings for the relation of requirement type and planned order type

    Dear Gurus
    Where we maintain the settings for the relation of requirement type and planned order type?Actually I have maintained strategy 60 for a particular material (planning material) so the requirement type is vsev and along with that the planned order type is coming is vp i.e non convertible planned order.That is ok the system is behaving right.But nowhere I can find the setting of vp with vsev how the system is picking vp?
    Regards
    Sandip Sarkar

    Hi!,
    That is an inbuilt sytem setting and you can't change that.
    Regards,
    Uday

  • Psa type and psa non type

    HI,
    anybody let me know , IN BI we have PSA TYPE and PSA NON TYPE CHECKBOX what is that??
    and where to find?? and why they maintain???
    Thanks
    Asim

    Hi Asim,
    Could you please give more details?  Like on which screen do you get this check box? Which version of SAP-BI are you using?
    Regards,
    Rashmi

  • Field Activity Type and Service Point Type from CC&B

    Our customer is migrating their CIS to CC&B. It is my understanding that the CC&B Field Activity Type is similar to CIS Service Order without the Service Point Type. (Service Point Type is Water or Electricity)
    The two valuescome from CC&B in their own fields.
    QUESTION: Does MWM 1.5.0.8.1 and ORS need these fields to be concatenated from CC&B or are these fields automatically concatenated via the router before the field order is created in MWM and then sent to ORS?

    Almost forgot - by default, it's one-to-one....but you can change this behavior.
    In the direct integration from CCB to MWM, the MWM Field Order Type is actually CCB's "JOB_CD" (which is a characteristic on the Field Activity Type). You could set the same value for "JOB_CD" for numerous Field Activity Types in CCB.

  • Header condition types and item condition type

    Hello Gurus,
            this is a simple question. does the header condition types are totally same as item condition types ?
    thanks very much!

    hi,
    header:
    If this condition is marked as a header condition, it is possible to enter the condition type in the header condition screen. Checks for changing the condition manually are unaffected by this.
    the header conditions calculate the header value
    item :  conditions of this type are allowed to be entered in the document items. The condition is then only valid for the particular item in which it is entered.
    item condition calculate at item level
    (freight condition)for eg = HD00 is a header condition .here if you have 10 materials and this cond type calculates the freight charges for all the 10 items.
                KF00 is aitem condition.here system caliculates the freight charges only for that particular items.
    Edited by: MANI ROOPA SD/MM on Apr 24, 2008 2:32 PM

  • Table that stores movement types and reversal movement type?

    I want  to take a movement type 561 and look that up in a table and find the reversing movement type in a program.  is there a table that stores the movement type and reversing movement type

    Hi
    Table T156 has got movement type control and details. Where as other T156* tables stores other details directly or indirectly used b yMovement types
    T156A
    T156B
    T156C
    T156F
    T156H
    T156HT
    T156K
    T156M
    T156N
    T156Q
    T156S
    T156SC
    T156SY
    T156T
    T156V
    T156W
    T156X
    Regards
    Virender Singh

  • Reg. New material type and New movement type

    dear Friends
    For what reason we need to create new material type and movement type ? this quesition is frequently asked by interviewer,but my answer is not exactly correct. Please tell me, why we are create newly. already I posted this quesition and got reply but no satisfaction with that.
    Thanks in advance
    Rajakumar.K
    *Note : Interview questions were not allowed in forum,Search forum before posting,lot of answered
    threads already available*
    Edited by: Jeyakanthan A on May 26, 2011 10:57 AM

    Hi,
    New Material type is required to meet various business functionalities of client. Depending on user department views required by client, field selection key required, wheather quanity and value updation is required or not and if so under which valuation area its required, wheather the business wants to have default value of price control  in material master, number range intervals to be used and wheather its internal/external, account determination process etc are some controlling functions which may force a business to create customised or new material type.
    Similarly new movement types can be created when the controlling features of the existing movement type do not match the requirement like wheather any movement type is required to move goods from GR valuated stock ( as an illustration), wheather auto PO/Auto storage location needs to be decided automatically, new account grouping and field selection procedure to be used etc are some controlling functions. As an illustration in earlier version of ECC 6.0 there was no movt type like 107,109 etc but since most of the business wanted to valuate stock when goods movement will occur from GR valuated stock , the above movt types was introduced in ECC 6.0. Thus business justification and understanding should be concrete to create new movt type.

  • What is the difference between /6** wage types and /7** wgae types

    Hi All,
    Can you please tell me the difference between /6 & /7 wage types
    and in what scenario /6 and /7 wage type amounts differ
    Thanks in advance
    Krishna

    - /6XX - Gross wages less pre-tax deduction. For example, if salary is $1,000 and the 401(k) deduction is $200,/6xx will be $800. SAP passes this amount to BSI for tax calculation. (/EXX - Tip income processing)
    - /7XX - Reportable taxable amount calculated by BSI. If ceilings on taxable amounts exist and are exceeded, BSI will return a reportable taxable amount of zero. (/FXX - tip income processing).
    Arti

  • Need table name for Output Types and Account Assignment Types

    Hi
    pl let me know the table name for
    1. Account Assignment Type
    2. Output Types (All)
    I need to download some company code specific data for both
    Pl confirm
    Warm Regards
    Vikcy

    Hi Thanks for reply
    You mean to say that Account Assignment Types = Account Assignment Category   ????
    Secondly In Table NAST, i can not see field "Output Type"
    Pl confirm once which field give me company code specific "Output Type" data
    Regards
    Vicky

  • Need Table related to Material product type and warranty product type

    Hi all,
    Can we get the table where for a given material product type, we can get related warranty product type.
    Requirement is , we have to link the warranty products to related material product.We need to create a seperate table  for material(with ibase) and its related some warranty products.
    Suggest me what are the possibilities and process for doing in best way.
    Thanks in advance,
    B kumar.
    Message was edited by:
            b kumar

    Please share how this is implemented.

Maybe you are looking for