Local Users and Groups
I've searched all of the associated links on this subject and they don't solve my problem. I do now get that, since I have 8.1 home, I do not have access to the Local Users and Groups feature and that is fine; I am essentially the only user on my new
computer. My problem is the following:
I bought a new Dell Inspiron 2350 and, using Carbonite, migrated everything over to it from my previous XP computer. There are a number of folders to which I am not granted access, such as My Pictures; the only advice the error messages give is to
change the access permissions, but I am not allowed to do that. I am only advised to use the Local Users feature to be able to do that. See my problem?? How do I negate all that stuff so that I can access all the files and folders that were brought
onto my new computer?
Did you try taking ownership ?
http://technet.microsoft.com/en-in/library/cc753659.aspx
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.
Similar Messages
-
Event ID 1085 on DC - Failed to Apply the Group Policy Local Users and Groups Settings
I have a domain with 2 DCs. The primary DC is running Server 2012 and is raising Event ID 1085 every 10 minutes and 20 seconds.
Windows failed to apply the Group Policy Local Users and Groups settings. Group Policy Local Users and Groups settings might have its own log file. Please click on the "More information" link.
System
- Provider
[ Name] Microsoft-Windows-GroupPolicy
[ Guid] {AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}
EventID 1085
Version 0
Level 3
Task 0
Opcode 1
Keywords 0x8000000000000000
- TimeCreated
[ SystemTime] 2014-10-20T20:09:03.706992400Z
EventRecordID 130087
- Correlation
[ ActivityID] {FDDFB8C5-9ECF-41B9-B2B4-3AD0B345A37A}
- Execution
[ ProcessID] 1000
[ ThreadID] 3280
Channel System
Computer SERVER.DOMAIN.NAME
- Security
[ UserID] S-1-5-18
- EventData
SupportInfo1 1
SupportInfo2 4404
ProcessingMode 0
ProcessingTimeInMilliseconds 10343
ErrorCode 183
ErrorDescription Cannot create a file when that file already exists.
DCName \\SERVER.DOMAIN.name
ExtensionName Group Policy Local Users and Groups
ExtensionId {17D89FEC-5C44-4972-B12D-241CAEF74509}
Everything I look up for Event ID 1085 seems to be about a different cause.
Any ideas?I enabled tracing on a domain gpo and I still get the error when running gpupdate /force .
I'm also still getting Event 1085. Here's the trace file. I've anonymized the site/domain and the GUIDs.
2014-10-21 11:16:54.003 [pid=0x3e8,tid=0xcd0] Entering ProcessGroupPolicyExLocUsAndGroups()
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] SOFTWARE\Policies\Microsoft\Windows\Group Policy\{GUID-1}
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] BackgroundPriorityLevel ( 0 )
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] DisableRSoP ( 0 )
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] LogLevel ( 2 )
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] Command subsystem initialized. [SUCCEEDED(S_FALSE)]
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] Background priority set to 0 (Idle).
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ----- Parameters
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] CSE GUID : {GUID-1}
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] Flags : ( X ) GPO_INFO_FLAG_MACHINE - Apply machine policy rather than user policy
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( X ) GPO_INFO_FLAG_BACKGROUND - Background refresh of policy (ok to do slow stuff)
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_SLOWLINK - Policy is being applied across a slow link
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_VERBOSE - Verbose output to the eventlog
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_NOCHANGES - No changes were detected to the Group Policy Objects
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_LINKTRANSITION - A change in link speed was detected between previous policy application and current policy application
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_LOGRSOP_TRANSITION - A change in RSoP logging was detected between the application of the previous policy and the application of the current policy.
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( X ) GPO_INFO_FLAG_FORCED_REFRESH - Forced Refresh is being applied. redo policies.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_SAFEMODE_BOOT - windows safe mode boot flag
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_ASYNC_FOREGROUND - Asynchronous foreground refresh of policy
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Token (computer or user SID): S-1-5-18
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Abort Flag : Yes (0x313be090)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] HKey Root : Yes (0x80000002)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Deleted GPO List : No
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Changed GPO List : Yes
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Asynchronous Processing : Yes
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Status Callback : No (0x00000000)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] WMI namespace : Yes (0x32273740)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] RSoP Status : Yes (0x320cc7f4)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Planning Mode Site : (none)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Computer Target : No (0x00000000)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] User Target : No (0x00000000)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Calculated list relevance. [SUCCEEDED(S_FALSE)]
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ----- Changed - 0
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Options : ( ) GPO_FLAG_DISABLE - This GPO is disabled.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPO_FLAG_FORCE - Do not override the settings in this GPO with settings in a subsequent GPO.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Options (raw) : 0x00000000
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Version : 19267878 (0x01260126)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPC : LDAP://CN=Machine,CN={GUID-2},CN=Policies,CN=System,DC=SITE,DC=DOMAIN
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPT : \\SITE.DOMAIN\sysvol\SITE.DOMAIN\Policies\{GUID-2}\Machine
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPO Display Name : Default Domain Policy
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPO Name : {GUID-2}
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPO Link : ( ) GPLinkUnknown - No link information is available.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPLinkMachine - The GPO is linked to a computer (local or remote).
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPLinkSite - The GPO is linked to a site.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( X ) GPLinkDomain - The GPO is linked to a domain.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPLinkOrganizationalUnit - The GPO is linked to an organizational unit.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GP Link Error
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] lParam : 0x00000000
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Prev GPO : No
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Next GPO : Yes
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Extensions : [{00000000-0000-0000-0000-000000000000}{GUID-3}][{GUID-1}{GUID-3}][{GUID-4}{GUID-5}{GUID-6}{GUID-7}{GUID-8}][{GUID-9}{GUID-10}][{GUID-11}{GUID-5}{GUID-6}]
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] lParam2 : 0x3146f978
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Link : LDAP://DC=SITE,DC=DOMAIN
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Purge GPH : C:\ProgramData\Microsoft\Group Policy\History\{GUID-2}\Machine\Preferences\Groups\Groups.xml
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Read GPE XML data file (592 bytes total).
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ----- Changed - 1
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Options : ( ) GPO_FLAG_DISABLE - This GPO is disabled.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GPO_FLAG_FORCE - Do not override the settings in this GPO with settings in a subsequent GPO.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Options (raw) : 0x00000000
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Version : 1245203 (0x00130013)
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPC : LDAP://CN=Machine,CN={GUID-12},CN=Policies,CN=System,DC=SITE,DC=DOMAIN
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPT : \\SITE.DOMAIN\sysvol\SITE.DOMAIN\Policies\{GUID-12}\Machine
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPO Display Name : Default Domain Controllers Policy
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPO Name : {GUID-12}
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPO Link : ( ) GPLinkUnknown - No link information is available.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GPLinkMachine - The GPO is linked to a computer (local or remote).
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GPLinkSite - The GPO is linked to a site.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GPLinkDomain - The GPO is linked to a domain.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( X ) GPLinkOrganizationalUnit - The GPO is linked to an organizational unit.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GP Link Error
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] lParam : 0x00000000
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Prev GPO : Yes
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Next GPO : No
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Extensions : [{00000000-0000-0000-0000-000000000000}{GUID-3}][{GUID-1}{GUID-3}][{GUID-9}{GUID-10}]
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] lParam2 : 0x324e8198
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Link : LDAP://OU=Domain Controllers,DC=SITE,DC=DOMAIN
2014-10-21 11:16:54.127 [pid=0x3e8,tid=0xcd0] Purge GPH : C:\ProgramData\Microsoft\Group Policy\History\{GUID-12}\Machine\Preferences\Groups\Groups.xml
2014-10-21 11:16:54.127 [pid=0x3e8,tid=0xcd0] Read GPE XML data file (592 bytes total).
2014-10-21 11:16:54.143 [pid=0x3e8,tid=0xcd0] Completed get next GPO. [SUCCEEDED(S_FALSE)]
2014-10-21 11:16:54.143 [pid=0x3e8,tid=0xcd0] WQL : SELECT * FROM RSOP_PolmkrSetting WHERE polmkrBaseCseGuid = "{GUID-1}"
2014-10-21 11:16:54.143 [pid=0x3e8,tid=0xcd0] Purged 2 old RSoP entries.
2014-10-21 11:16:54.143 [pid=0x3e8,tid=0xcd0] Logging 2 new RSoP entries.
2014-10-21 11:16:54.159 [pid=0x3e8,tid=0xcd0] RSoP Entry 0
2014-10-21 11:16:54.174 [pid=0x3e8,tid=0xcd0] RSoP Entry 1
2014-10-21 11:16:54.174 [pid=0x3e8,tid=0xcd0] Completed get GPO list. [SUCCEEDED(S_FALSE)]
2014-10-21 11:16:54.174 [pid=0x3e8,tid=0xcd0] IsRsopPlanningMode() [SUCCEEDED(S_FALSE)]
2014-10-21 11:17:04.252 [pid=0x3e8,tid=0xcd0] Completed settings update (csePostProcess). [ hr = 0x800700b7 "Cannot create a file when that file already exists." ]
2014-10-21 11:17:04.252 [pid=0x3e8,tid=0xcd0] Completed CSE post-processing. [ hr = 0x800700b7 "Cannot create a file when that file already exists." ]
2014-10-21 11:17:04.267 [pid=0x3e8,tid=0xcd0] Leaving ProcessGroupPolicyExLocUsAndGroups() returned 0x000000b7 -
Hello All,
I can no longer use all of the "Computer Management" tools against a remote
computer. "Local Users and Groups", "Event Viewer", "Performance Logs and
Alerts" and "Device Manager"
kindly see the below snapshot for assistance
REGARDS DANISH DANIEThis link may help....
http://windowsxp.mvps.org/admintools.htm
Freeman -
Event 4098, Group Policy Local Users and Groups
Hello,
A few of our computers on the network are not replacing the local "Administrator (built-in)"account with our administrator account we set up through Group Policy. I recieve the follow error message from the Applicaiton Logs. I'm
not sure if this error is a PC issue instead of a Group Policy issue, because Group Policy seems to be working fine on our other PCs. Any suggestions/ideas would be helpful. Thank you.
Error message: The computer "Administrators (built-in) preference item in the "Security Policies {CD8199AF-99A8-41F8-8D28-C92DD9C57A51}" Group Policy object did not apply because it failed with error code '0x80070526 The specified group policy
already exists.' This error was suppressed.Hi,
It seems that you have configured this security policy already, you can try run GPupdate /force command and then check if all security policies are applied in your computer:
Resultant Set of Policy
http://technet.microsoft.com/en-us/library/cc772175.aspx
you can use this command to retrieve the specific group policy:
http://technet.microsoft.com/en-us/library/ee461059.aspx
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support -
I jumped on my parents computer, which is on a domain. I added a new local user(with my live.com login) and gave it admin status. That's when the trouble began.
The main user profile disappeared. I used the command prompt fix (see other fixes) to add the missing user back into admin. I logged back in, and it set up the account for the first time (WTF?). I cannot access any files from the main account
(that I logged into just fine before to get this debacle started.)
When going to Local Computer Management --> System Tools, my users and groups tool is missing.
I ran lusrmgr.msc only to find out that the most current version of Windows 8.1 and this is what it said "This snapin may not be used with this edition of Windows 8.1. To manage user accounts for this computer, use the User Accounts tool in the
Control Panel." <---- Awesome! (that was sarcasm.)
I have spent over two hours in the User Account tool during the course of this problem only to prove that a picture of a computer is more useful that that "tool".
To anyone reading this ticket, the best advice I can offer you (as long as its not a crucial machine) is to back up what you can gain access to, format your hard-drive and reinstall windows and start over again. I wouldn't recommend reinstalling 8.1,
I would say go back to 7 and wait until 10 comes out. Windows 8 is the new Vista. Good luck!Hello AhavahOlam,
I can understand your feelings.
If my understanding is right, after adding a new local user in domain-joined Windows 8.1, you can’t open the local users and groups.
Can you still add account by going to Control Panel\User Accounts and Family Safety\User Accounts\Manage Accounts?
As this computer is domain-based, it is recommended to contact the domain administrator to see if the option is blocked.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support -
How to reset users and groups in Server.app?
Recently after change settings in the Server.app (like turn off/on open directory, delete/add certificates), I got a strange problem:
In the users and groups list, it display all local users and groups (looks like system users and groups, about 100 users and groups, but this is a new server)
I tried reset the server.app by following
howto reinstall/reinitialize os x server
http://support.apple.com/kb/HT200271?viewlocale=en_US
These users and groups still showing there.
Have you seen this before and how can I completely reset the server.app to factory default so that I can start over the set up?In theory, that should restore the users. You can do some surgery if you are really brave. But the reinstall generally should be enough.
These accounts are in the DSLocal data store. Basically, this is very similar to the any OS X machine. Apple keeps a default copy of the Local Database here:
/System/Library/DirectoryServices/DefaultLocalDB/Default
Should you need to reset a machine to the default local database, you can remove the current database (/var/db/dslocal/nodes/Default) and then copy the default one to the same location. I would not go this far unless the reinstall was unsuccessful.
To check, you can run this command:
dscl . list /Users
That will list all the Users in the local DB. To get a count, pipe to wc
dscl . list /Users | wc -l
On a Server that I just jumped on, I see 79 users and 111 groups (dscl . list /Groups | wc -l) But this is a system will man SACL groups so I likely have more than the default.
Hope this continues to help. Probably more info that you want.
Reid
Apple Consultants Network
Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store
Author "Mavericks Server – Control and Collaboration" :: Exclusively available in Apple's iBooks Store -
Manage users and groups on 10.5 client like 10.5 server?
can anyone recommend software for managing local users and groups on 10.5 client? we only need filesharing and don't need the added expense of OS X Server.
thanksoh, right. we can add users with the File Sharing pref pane and can add groups under the Accounts pref pane.
i'm assisting a friend reconfigure a 'server' (os x client box) that was damaged.
i'd like to create a new group and then add a handful of users to that group for filesharing. these users don't really need to access the mac for local login.
they are using Windows Vista from the clients and the way it's set up now, if a user connects and modifies/creates a file, no one else can then modify the file. we have to run chmod on the file/directory for everyone to be able to change it. i'd like to configure it so the permissions work correctly without having to do this. -
VBS: Add domain user and group to local administrators
I have a piece of VBS code that I have modified that basically adds a specified domain user and group to the PCs local Administrators group. It works on Windows 7, but not on Windows 8 at all.
Call AddUserToGroup("./Administrators", "myDomain.net/NetworkAdminis")
Call AddUserToGroup("./Administrators", "myDomain.net/Domain Admins")
Call addDomainUser("myDomain", "myUserGroup")
Sub AddUserToGroup(local, domain)
Dim objLocalGroup
Dim objDomainGroup
Dim server
For Each server in servers
Set objLocalGroup = GetObject("WinNT://" & local & ",group")
Set objDomainGroup = GetObject("WinNT://" & domain & ",group")
With objLocalGroup
.Add(objDomainGroup.AdsPath)
.SetInfo
End With
Next
Set objLocalGroup = Nothing
Set objDomainGroup = Nothing
End Sub
Sub addDomainUser(strDomain, strUser)
Dim strComputer
Dim objWshNet
Dim objGroup
Dim objUser
Set objWshNet = CreateObject("WScript.Network")
strComputer = objWshNet.ComputerName
Set objGroup = GetObject("WinNT://" & strComputer & "/Administrators,group")
Set objUser = GetObject("WinNT://" & strDomain & "/" & strUser & ",user")
If Not objGroup.IsMember(objUser.ADsPath) Then
objGroup.Add (objUser.ADsPath)
End If
Set objWshNet = Nothing
Set objGroup = Nothing
Set objUser = Nothing
End Sub
I have debugged the code line by line using VBA's IDE and there seems to be no error condition firing. It executes all lines, but it is not adding the users and groups as it did with Windows 7 and below. The script is being run as local administrator.Hi,
The first step is to comment out your On Error Resume Next line and try again.
Don't retire TechNet! -
(Don't give up yet - 13,225+ strong and growing) -
Why do I have so many Users and Groups (RDN) on my computer?
I have had trouble viewing certain documents. I've been told I don't have permission. When I checked the Users, I find a list of Users and Groups that I'm unaware of. My computer should only be used by myself and my daughter. How do I know which Users to
keep, and which to get rid of? How do I delete unwanted users? I do belong to a group. My computer was given to me by my former employer. Does he still have access to my files?
These are the additional users and Groups listed on my computer...
Account Manager 101
Administrator
Administrators
ANONYMOUS LOGON
Authenticated Users
Backup Operators
Batch
CONSOLE LOGON
CREATOR GROUP
CREATOR OWNER
Cryptograph Operators
Dialup
Distributed COM Users
Event Log Readers
Everyone
Guest
Guests
Homegroupusers$
HomeUsers
IIS_IUSRS
INTERACTIVE
IUSR
Local Account
Local Account and Member of Administrators Group
LOCAL SERVICE
Mackenzie Victor
NETWORK
Network Configuration Operators
NETWORK SERVICE
OWNER RIGHTS
Performance Log Users
Performance Monitor Users
Power Users
Remote Desktop Users
REMOTE INTERACTIVE LOGON
Replicator
SERVICE
SYSTEM
TERMINAL SERVICE USER
This Organization Certificate
Users
Some of which have access to my folders, others do not. Is this something that should concern me?I have had trouble viewing certain documents. I've been told I don't have permission. When I checked the Users, I find a list of Users and Groups that I'm unaware of. My computer should only be used by myself and my daughter. How do I know which Users to
keep, and which to get rid of? How do I delete unwanted users? I do belong to a group. My computer was given to me by my former employer. Does he still have access to my files?
These are the additional users and Groups listed on my computer...
Account Manager 101
Administrator
Administrators
ANONYMOUS LOGON
Authenticated Users
Backup Operators
Batch
CONSOLE LOGON
CREATOR GROUP
CREATOR OWNER
Cryptograph Operators
Dialup
Distributed COM Users
Event Log Readers
Everyone
Guest
Guests
Homegroupusers$
HomeUsers
IIS_IUSRS
INTERACTIVE
IUSR
Local Account
Local Account and Member of Administrators Group
LOCAL SERVICE
Mackenzie Victor
NETWORK
Network Configuration Operators
NETWORK SERVICE
OWNER RIGHTS
Performance Log Users
Performance Monitor Users
Power Users
Remote Desktop Users
REMOTE INTERACTIVE LOGON
Replicator
SERVICE
SYSTEM
TERMINAL SERVICE USER
This Organization Certificate
Users
Some of which have access to my folders, others do not. Is this something that should concern me?
I have something the same only mine is a new pc who can I trust -
Migrating Users and Groups from Windows 2000 server to Windows 2013 Standard.
OK...let me see if I can get this question out the way I need to....
I inherited a Windows 2000 Server that's on it's last legs. We have a new server, a Windows 2013 Standard machine that we just recently purchased. I need to migrate the users and groups over to the new server, but there are two things that are
making it difficult:
The 2000 machine is NOT a Domain Controller
The 2000 machine is NOT running Active Directory
This is a file server that hangs onto another network of which I have no control of. It has its' own IP address and there is NO WAY we can run Active Directory or make it a domain controller.
I have close to 300 users, groups, and printers to bring over to the new server. Rather than kill myself doing manual input, is there any other way to do this?Hi,
When you import the CSV file to new server, you need to create a new user account then import the CSV.
http://blogs.technet.com/b/heyscriptingguy/archive/2014/10/01/use-powershell-to-create-local-users.aspx
If you have any issue, i suggest you could ask in PowerShell forums:
https://social.technet.microsoft.com/Forums/en-US/home?forum=winserverpowershell
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Hi I do not want iTunes to open up automatically when I turn on my macbook pro. I tried going to System Preferences>Users and Groups>Login Items and then I took iTunes off the list but it still opens up automatically when I turn on my laptop. What should I do?
Hi r,
Make sure you close iTunes before shutdown. And you're quite welcome. -
I am trying to stop programs from opening automatically when I turn my computer on. I tried system preferences>users and groups>login items...then I deleted them itunes and emial from the list but it did nothing. They continue to open up every time I turn on my Macbook Pro.
Hi r,
It sounds like you're running Lion?
Have you tried running Verify and/or Repair Disk?
Have you tried running Repair Permissions?
Do you have at least 15% free space available on your HD? -
How to change default /Users and /Groups to different Volume?
Users are created in /Volumes/<boot>/Users and groups in /Volumes/<boot>/Groups.
We need these to be created on a different volume, eg., /Volumes/External/Users, and /Volumes/External/Groups.
Setup Assistant correctly put user Backups into */Volumes/External/Shared Items/Backups* and also correctly put web services on /Volumes/External/ServiceData -- we want to do the same for Groups and Users.
Groups are the most critical, as the group needs bulk storage. Users we could leave as is if it can't be done.
How can this be configured? We've read File Server Admin, Open Directory Admin, and Advanced Server admin from http://www.apple.com/server/macosx/resources/documentation.html without finding an answer.
Thanks in advance.1. Create new folders on the external volume to hold users and groups, but to prevent confusion name them something other than "Users" and "Groups". /Volumes/External/NetUsers and /Volumes/External/NetGroups would be reasonable choices.
2. Share both of these folders (in Server Admin -> server name in sidebar -> File Sharing -> Volumes & Browse modes -> select each folder -> click Share near the top right).
3. Enable both folders for automounting on clients (Server Admin -> server name in sidebar -> File Sharing -> Share Points-> select each folder -> Share Point tab under that -> Enable Automount option) with the default options (Directory: /LDAPv3/127.0.0.1, Protocol: AFP, Use for: User home folders and group folders). Be sure to click Save (not just OK in the dialog).
4. To migrate users, run Workgroup Manager, and change the home location for the users you want to move (select Accounts in the toolbar -> /LDAPv3/127.0.0.1 from the hidden pop-up menu under that -> User icon tab at the left -> select the user(s) you want to change -> Home tab on the right -> select the NetUsers option from the "Where" list). Then, for each user, run this command on the server: "sudo cp -Rp /Users/username /Volumes/External/NetUsers".
5. Similarly, move Group folders in WGM (Accounts -> /LDAP... -> Groups icon on left -> select groups to move -> Group Folder tab on right -> NetGroups in the list). Then, for each group, run "sudo cp -Rp /Groups/groupname /Volumes/External/NetGroups".
6. Test to make sure all is working before deleting the old user and group folders from /Users and /Groups (do NOT delete /Users and /Groups themselves, just the individual folders from under them). -
Generate report to show all users and groups in Shared Services in EPM 11x
Hi,
Is there any way to generate a report (like a migration report or job status report) which can be generated through workspace/shared services 11.1.1.3 so that my admin can look at all the users and groups created. Something that I can view and probably print out? Any suggestions?
~AdeebaYes, I knew this one. This basically shows me the users and groups assigned specific provision access. Is there any way to view a report that shows which users and groups have access to dimensions of an individual planning application?
~Adeeba -
Assigning Roles to Users and Groups
Hi,
We have installed EP 5.0 SP4...with Content Management...we configured the LDAP to Portal......all the users are maintained through LDAP only...the problem is assigning the Role's to user..here in portal how to assign the roles to the users...we are not getting the Role assignment option under Portal Admin TAB..is there any way to configure the roles to User's are Group's.....
it is an urgent assignment for me..help can be appreciated...
sudhirSudhir,
You can assign the roles to users and groups as below.
1. Select the System Administration in the top level navigtion
2. Select user administration
3. You can search for a specific user or a group from this iView.
4. Use the edit button to edit the profie of the user or group.
5. Search for the role in the search iView.
6. Add the role to the user of group and save.
Maybe you are looking for
-
How to configure ECS facility in SAP
Dear Friends , Please tell me how to configure ECS payment facility in SAP ? Regards Nilesh Vakil
-
Loading external (PDF)file into BLOB colum in the table. Need urgent help.
Hi All, I've currently been working on loading many external binary files (PDF) into BLOB column. After some digging, I learn that the SQL*LOADER can be used to load data from external files into table. I also got help from another forummate mentioni
-
Hi All, I want to design a SOA system (as per best practices) which receives XML files from a third party vendor.The system will be responsible for storing and distributing the xml metadata to a database and distribute the XML files as is, to differe
-
I am using WCS 6.0.132.0 and WLC 6.0.188.0. I am creating guest ID's using the LobbyAmbassador interface, and I would like to allow guest users to use the same ID password either wired or wireless. I cannot see any way to accomplish this, am I miss
-
Good issue using mass maintenance
Hi SAP fans, I'm about to do good issue process using movement type 551 Scrapping. the users want to have 1 document number for 1 thousand material to scrap. is there any mass maintenance for good issue ?