Local Voice Conversation Recording with VG224 (Dual home topology)

Hi Team,
Hope all you are doing good.
We have VG224 which is connected to two different Core switch, I have centralized based CUCM BE & one voip recorder in the network, requirement is very simple if any one of the core switch goes down all things should work on alternate Core switch.
Currently we are able to record voice conversation between any IP to IP phone, any IP to Analogue phone & vice versa & between analogue phones which are connected to two different VOIP Gateways.
But we couldn't able to record voice conversation between analogue phones which are connected to same VOIP gateway. Please refer below configuration philosophy and if you have any other suggestion considering below philosophy please suggest.
I have created two SIP trunk one is from VOIP gateway to Cucm & other one is for CME SRST and managing SIP trunks by using preference. The reason behind creating SIP trunk rather than to get VOIP gateway registered with CUCM is we have dual Ethernet interface and these Ethernet interface are connected to two different Core switches and if i choose to get this VOIP gateways registered with CUCM then I have to specify last 10 character of Mac ID as we have two Ethernet interface then which Ethernet Mac ID will be used? if we are going with same philosophy then analogue phone which are connected to same VOIP gateway doesn't need any IP address to communicate with each other so the result will be the same as mentioned above. If possible then please suggest on the same.
Thanks,
Vishal

Currently my Cisco VG224 is registered with Cucm over MGCP do we have any configuration by doing it we can force VG224 to send local RTP Stream to switch and by using SPAN/RSPAN we can record the same?

Similar Messages

Voice memo recording with Belkin Tunestudio

I've tried Erasing all content on my Ipod, but still get Missing time glitches on my playback.

Have you tried importing the wav files you did find to iTunes?

How can I download to my pc a conversation recorded in my iPod Touch using the voice notes??

How can I download to my pc a conversation recorded in my iPod Touch using the voice notes????

From the Users Guyide:
Syncing Voice Memos
iTunes syncs voice memos to your iTunes library when you connect iPod touch to
your computer. This lets you listen to voice memos on your computer and provides a
backup if you delete them from iPod touch.
Voice memos are synced to the Voice Memos playlist. iTunes creates the playlist if it
doesn’t exist. When you sync voice memos to iTunes, they remain in the Voice Memos
app until you delete them. If you delete a voice memo on iPod touch, it isn’t deleted
from the Voice Memos playlist in iTunes. However, if you delete a voice memo from
iTunes, it is deleted from iPod touch the next time you sync with iTunes.
You can sync the iTunes Voice Memos playlist to the Music app on iPod touch using
the Music pane in iTunes.
Sync the Voice Memos playlist to iPod touch:
1 Connect iPod touch to your computer.
2 In iTunes, select iPod touch in the Devices list.
3 Select Music at the top of the screen.
4 Select the “Include voice memos” checkbox and click Apply.
Some users have said that they had to first create a blank Voice Memos playlist for the memos to be synced to the computer.

I have a digital voice recorder with a 3.5mm mic and headphone jack and want to transfer some recorded lecture to my mac book pro. The mac book does not have 3.5mm jacks. Does anyone know if a jack to USB converter would work?

I have a digital voice recorder with a 3.5mm microphone and headphone jack and want to transfer some recorded lectures to my mac book pro. The mac book does not have 3.5mm jacks. Does anyone know if a jack to USB converter would work?

Is there a pattern to the time of day or other detail that may be
traced back to a OS X system cause of this odd phenomenon?
Are there any copies of system files on any of the attached USB
external drives? Any libraries, such as iTunes, iPhoto, etc?
Once the drives are indexed by Spotlight, are their permissions
ignored by the OS X? Content, if neutral, should not affect the
wake or sleep cycle; especially if they're ignored by the OS X.
Could there be a bad cable or other component? If so that would
be a difficult process of elimination to detect it. Usually replacing
most suspect components in the USB stream (external to Macs)
is a rote way to mechanically test that idea; & not 100% sure.
Does the equipment all have a good ground to the utility or house
electrical field? An intermittent ground may affect more than sleep.
Hard to say at this point. Maybe a late-night talk radio guru on
remote viewing could peer into your situation and sleuth it out?
Sorry to have run out of ideas, but the process must be electrical
& mechanical to some extent. - Or perhaps odd software inspired.
Do you have any phone-home spyware items inside, just jumping
at the chance to spill your information? Little Snitch may help.
PS: Perhaps the computer needs to go into Apple & have a genius
or product specialist at AASP test the unit thoroughly... BlueTooth?
see:
https://www.google.com/?gws_rd=ssl#q=Wake+reason:+XHC1
Good luck & happy computing!
edited 2x

Merging local records with device records failed

Hi,
I have a macbook with OS X 10.4.11 (Intel procesor) I did install the latest Pockect mac for blackberry version (the current one in the Blackberry's page), i use to use the old one, since I did the updated I can't get that both, device and Mac SYNC any item, no contacts, no calendar...
The message I got last time was:
06:06:57:140 merging local records with device records failed.
Could some one with me a light on this bug?
Thanks

Hi rguardia,
Can you try synching one PIM database at a time, e.g. just Contacts by itself, so we can determine which database is experiencing the problem? The error you are receiving is likely being caused by one specific database.
Once you have identified the database that is causing problems, can you perform the steps listed below:
1 - Run Data Purge on the affected database. Data purge can be found in the following location:
Mac HD/users/<Home User>/Library/Application Support/PocketMacSyncManager/Additional Tools.
***Please note this utility will delete all information stored in the selected database on your BlackBerry however once the information has been deleted from your device you can reimport the data to your BlackBerry from the application on your Mac.
2 - Run Sync Clean, which can be found in the same folder as Data Purge.
3 - Disconnect the BB from the Mac, remove the battery from the back of the device, wait 10 seconds then reinsert it
4 - Reboot the Mac
5 - Reconnect your BlackBerry to your Mac
6 - Open PocketMac and select Reset All Devices to First Sync State from the Devices menu
7 - Configure synchronization settings for the affected PIM database, choosing the option to Overwrite Device. If the data is successfully transferred to the device, reconfigure PocketMac back to doing a two-way sync.
If you are still running into the same problem after performing the steps above, try synching one category of the affected database at a time. To do this, click on the tab of the database you are trying to sync, click on Advanced Preferences next to the selected application, and choose the option to sync only selected categories. Try synching with only one category selected at a time, just to see if the issue is related to data within a specific category.
Let us know how you make out!

I have an Apple16 GB with BT Yahoo home pad that had a small box to let me go to mail and another for weather and below them I had my local weather in box,somehow I have erased them and don't know how to get the back ,not very good with computers.

I have an Apple16GB with BT Yahoo home page which had a box for mail and weather and further down I had my local weather, I have touched something and lost these boxes and my home page has changed and I would like to get it back as it was. I have to admit to being useless at computers although I love my I Pad.

Is this the website that you are looking for? According to the very little bit of research that I did on this before responding to you, there have been changes made to the website and to the way that works ...if I read everything correctly.
http://home.bt.com/
Did you have a shortcut to the website on your iPad home screen? If that is what you want to create again, navigate to that website in Safari and then tap the arrow icon next to the address/URL field at the top of the Safari toolbar. Form the window that will pop up, select - Add to Home Screen. That will put an icon on your home screen that will allow you to open directly to that page in Safari when you tap on it.

I connect my mic with an M-audio mobile pre usb device. When I try to record, I can see that my voice is recording but can't hear it during playback.

I connect my mic with an M-audio mobile pre usb device. When I try to record, I can see that my voice is recording but can't hear it during playback. I tried different input and output settings but it didn't help. Any help will be appreciated.

Hear your microphone or instrument as you play and record (monitoring)
You can hear, or monitor, input from an instrument or microphone in GarageBand while you play and record. When you turn on monitoring for a track, you hear the musical instrument or microphone connected to the track’s input. Monitoring lets you hear yourself play so that you can hear the part you want to record as well as the rest of the project.
You can turn on monitoring for a Real Instrument track or Electric Guitartrack from the track’s header, or in the Track Info pane. Electric Guitar tracks always show their monitoring buttons, and you can show monitoring buttons for Real Instrument tracks using a menu command. You can use monitoring with feedback protection to avoid feedback while you play.
Hide
To turn on monitoring in the track header:
Choose Track > “Show Monitoring for Real Instrument Tracks.”Monitor buttons appear in the headers of Real Instrument tracks. On tracks with monitoring turned on, the button lights yellow.
Click the Monitor button in the header of the track you want to use.
HideTo turn on monitoring in the Track Info pane:
Double-click the header of the Real Instrument or Electric Guitar track you want to turn on monitoring for.The Track Info pane opens.
From the Monitor pop-up menu, choose one of the following:
Choose Off to turn off monitoring. You can hear your instrument only while you record.
Choose On to turn on monitoring and protect against feedback.
Choose On (no feedback protection) to turn on monitoring without feedback protection. If the input level is too high, it may cause feedback (especially if you are using a microphone and listening to your project through your computer speakers).
For an Electric Guitar track, you can view the Monitor pop-up menu by clicking Edit, and then clicking the back side of the amp. The Monitor pop-up menu appears with the input controls below the stage.
You should usually turn off monitoring when you are not playing or singing. When monitoring is turned on, your computer can pick up output from your speakers or monitors, causing unwanted feedback. Using headphones rather than speakers to listen to your projects can help eliminate feedback.
If you select your computer’s built-in microphone as the audio input, in the Audio/MIDI pane of GarageBand preferences, monitoring is turned off for all Electric Guitar tracks to avoid unwanted noise.
SEE ALSO
If you don’t hear sound from a Real Instrument
Was this page helpful?Send feedback.
© 2010 Apple Inc. All rights reserved.

I have a problem with my iphone 5s. recording a vid using back lens and no sound but on the rear lens there is a clear voice.. anyone with any answers???

I have a problem with my iphone 5s. recording a vid using back lens and no sound but on the rear lens there is a clear voice.. anyone with any answers???

Hi, Nurlynn.
Thank you for visiting Apple Support Communities.
I would need clarification on this issue to provide a better answer. However, here are a couple articles that I would go through when experiencing issues with the Mic and Camera.
If your voice is too faint or sounds unclear using iPhone, or iPod touch
http://support.apple.com/kb/ts5183
Get help with the camera on your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT6350
Cheers,
Jason H.

Can I record voice notes/memo with my ipod video ?

Can I record voice notes/memo with my ipod video and how ?

You need one of the iPod-compatible microphones, you'll get more information on this page: iPod: Recording voice memos

Ask the Expert : Call Recording with Cisco Unified Communication Manager (UCM)

Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about Cisco Unified CM call recording solution that provides the ability to record customer conversations for compliance purpose. This topic will cover an overview, configuration and troubleshooting of the call recording feature.
Monday, January 19th, 2015 to Friday, January 30th, 2015
Harmit Singh is a technical leader with the High Touch Technical Services (HTTS) and Technical Assistance Center (TAC) Unified Communications teams based in Bangalore. He has broad experience in Cisco Unified Communications infrastructure solutions. He has 10 years of experience working with large enterprise and service provider networks. He also holds CCIE certifications (#20012) in Voice and Collaboration as well as Red Hat and VMware certifications.
Mohammed Noorulla Khan is a customer support engineer in High-Touch Technical Services (HTTS) Unified Communications teams based in Bangalore. His areas of expertise include Cisco Unified Communications Manager, Gateways, and Jabber. He has over 6 years of industry experience working with large enterprise and service provider networks. He also holds CCIE certifications (#35741) in Voice and VMware certifications.
** Remember to use the rating system to let Mohammed and Harmit know if you've received an adequate response. **
Because of the volume expected during this event, the experts might not be able to answer every question. Remember that you can continue the conversation in the Collaboration, Voice and Video community, subcommunity, IP Telephony, shortly after the event. This event lasts through January 30th 2015. Visit this forum often to view responses to your questions and those of other Cisco Support Community members.

Hi Maheshwar,
Thank you for your query. Please find my response below:
1> Do we support recording with HCS environment and which 3rd party vendors are validated with HCS based call control 10.1.1?
Answer: Whether you use a standalone UCM cluster, UCCE or HCS, call recording would be supported across the board in the same manner.
Please refer to the following link:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/hcs-cc/10_0_1/Install_and_Config/CHCS_BK_ICC270D0_00_installing-and-configuring-cisco-hcs/CHCS_BK_ICC270D0_00_installing-and-configuring-cisco-hcs_chapter_011.html#CHCS_RF_T1105284_00
Option
Notes
Recording
All Recording applications that are supported by Unified CCE are supported on HCS for CC. For details, see Recording section in Agent and Supervisor Capabilities.
With respect to which 3rd party vendors have been validated, marketplace.cisco.com is a good place to crosscheck this info. You will find a Cisco Compatible Logo against the partners listed there. The logo is used to signify that the PARTNER product has undergone technical interoperability testing with the Cisco product specified. The interoperability testing is conducted by a third party laboratory based on testing criteria set forth by Cisco. PARTNER is solely responsible for the support and warranty of its product. Placement of the PARTNER product or information pertaining thereto, on the Cisco Marketplace website does not constitute an offer to sell the PARTNER product in any way. For further information on the PARTNER products, please visit the PARTNER company website.
Please refer to the following link and use the search field under Collaboration Technology:
https://marketplace.cisco.com/catalog/search?utf8=%E2%9C%93&search[q]=&search[technology_category_ids]=23%2C24%2C197%2C1940%2C1941%2C1921%2C1576%2C1897%2C1983%2C2418%2C26%2C198%2C1904&search[order]=tier&per_page=20&_=1421663854257&ts=1421663855441
2> Which end points are supported for recording via HCS call control?
Answer: The following link should help clarify this:
http://solutionpartner.cisco.com/web/sip/wiki/-/wiki/Main/Unified+CM+Silent+Monitoring+Recording+Supported+Device+Matrix
Please let us know if you have any follow up questions. Hope this is helpful.
Regards,
Harmit Singh.

[b]Can't install voice conversion server properly[/b]

OCS 9.0.4.1 installed on three machines: infrastructure and storage on the first SPARC Solaris 9, midletier on the second SPARC Solaris 9, and Voice Conversion and Document Conversion Servers version 2.0.4.2.0 on the Windows 2000 Server. Dialogic card D/41h is installed on Windows machine with Dialogic drivers SR5.1.1. Dialogic tests run successfully.
Dialogic card is connected to one PSTN analog line. Dialogic card is enabled manually (as recommended).
"imtctl runtests" result for voiceconvtest is "false" and for docconvtest is "true". Document conversion works. Voice conversion fails.
"imtctl getmonitorstats" on machine with conversion servers shows:
"voiceconv available - true
T1-line-status - false
In-use-channels - 0
Idle-channels - 0
Bad-channels - 0 "
Then, if I try to enable voice streaming or record voice stream and push "connect" button, I get a message "Connection failed: An unknown error occurred while connecting to the voice streaming service". After that, I found the following exception message in "Monitor -> Conference details" log in administrator web interface:
Error reading voiced status packet-oracle.imt.transport.aio.ChannelClosedException: The channel is already closed
at oracle.imt.transport.mx.aio.MxIOChannel.read(MxIOChannel.java:214)
at oracle.imt.server.dispatcher.WrappedIOChannel.read(WrappedIOChannel.java:68)
at oracle.imt.imtserver.voice.VoiceRCU$VoicedCallback.onCompleted(VoiceRCU.java:866)
at oracle.imt.imtserver.ClbSession.processCompletion(ClbSession.java:485)
at oracle.imt.server.util.SyncCompletionProcessor.processCompletion(SyncCompletionProcessor.java:85)
at oracle.imt.imtserver.ClbThread.run(ClbThread.java:109)
Caused by: oracle.imt.lib.base.QueueClosedException: Closed at oracle.imt.transport.mx.aio.MxTaskProcessor.onTaskArrival(MxTaskProcessor.java:70)
at oracle.imt.transport.mx.aio.MxIOChannel.addReadTask(MxIOChannel.java:324)
at oracle.imt.transport.mx.aio.MxIOChannel.read(MxIOChannel.java:209)
... 5 more
This exception message is presented just after "dialin-status - dialing" message in log.
InstanceLocation parameter values on both midtier and voice conversion servers are the same.
Bouncing midtier and voice conversion servers gives no results.
Please help me to understand what's wrong and what do I need to set up to get correctly operating Voice Conversion Server.

I do not belive the you could run it without hacks. VMware peratty well isolate/subsitute the environment. What differs MAC from a PC is the BIOS. OS X just makes some calls into EFI/NVRAM to check if it run on accepted hardware. VMware hacks to run OS X are to boot from special EFI which pretend MAC. In other words VMware emulate only PC virtual machine, I have never heard of MAC virutal machine for any virtualization software.

Distorted recording with QuickTime 7 using USB Audio CODEC

I am running Mac OS X Tiger 10.4.8 with all the latest update from Software Update which includes QuickTime 7.1.3.
I am using QuickTime Broadcaster to stream back to itself (loopback) and record to disk at the same time. The input audio device is set to USB Audio CODEC (the default driver that comes with Mac OS X Tiger, and I am using an Alesis MultiMix 16USB mixer on a PowerMac Dual Core G5). I am using MPEG-4 Audio compression (no Video) of 16-bit, 44.1kHz and 128kbps (stereo).
The problem is that sometimes I get recordings (ranging from 1.5 hours to 2.75hours long) with distortion. Here is a short 20-second audio clip with distortion-free audio for about 6 seconds and then distortion sets in:
http://www.netmedia.com.sg/files/SampleDistortion20s.mov
Whether it overlays on top of the original audio or replaces it, I cannot tell, but the transition is instant and smooth with no audible clicks or pops. The distortion can come in and go randomly. For example, I had one recording with distortion coming in at about 2 minutes plus and it remained until about 2hr10min when the distortion went away. Sometimes it didn't go away; other times it came in about an hour later. I also had once where the distortion last only for about 6 minutes somewhere in the middle of a 2.25 hours recording...all in all, it occurs at random. And I do get distortion-free recordings.
This problem also occurs on an iMac G5 with a Alesis MultiMix 12USB mixer, and in another Vara Software's Videocue PRO software which uses QuickTime for recording and playback. QuickTime 7.0.x and all versions of 7.1 also had this problem.
Because of this problem, I may need to use a convoluted method to stream and record to disk via QuickTime. By the way, I also tried streaming to another local subnet IP address just as a troubleshooting without success.

I too am having distortion problem (Sorry no solution here).
Using OS 10.4.8, QT7.1.3, & Adobe Premiere 6.5 on a G4.
After I down loaded QT 7.1.3, my problems started. Is this when your problems started too?
Audio is in "slow motion" sound when editing. On rare occations, it sounds correct for 10 sec or so but sync is out and eventually reverts to "slow motion" sound. Even more bazar, when viewing a clip in a thumbnail preview, it works fine. So I know the orginal is good.
My contention is QT is causing this. All I want is my previous version of QT back. I think this might fix your problem too. Unfortunately, there is no reinstall that I can find that takes QT 7.1.3 off and puts QT 7.1.1or2. The reinstall QT 7.0.3 which is on the Apple website will not restall.
Looking for a reintall that will take QT 7.1.3 off, help anyone?

Distorted recording with QuickTime using USB Audio CODEC

I am running Mac OS X Tiger 10.4.6 with all the latest update from Software Update which includes QuickTime 7.1.1.
I am using QuickTime Broadcaster to stream back to itself (loopback) and record to disk at the same time. The input audio device is set to USB Audio CODEC (the default driver that comes with Mac OS X Tiger, and I am using an Alesis MultiMix 16USB mixer on a PowerMac Dual Core G5). I am using MPEG-4 Audio compression (no Video) of 16-bit, 44.1kHz and 128kbps (stereo).
The problem is that I usually get recordings (ranging from 1.5 hours to 2.75hours long) with distortion. The distortion sounds like audio going through Logic Pro's BitCrusher plug-in, that is, audio recorded with less than 8-bit resolution but kept at 44.1kHz sample rate. Whether it overlays on top of the original audio or replaces it, I cannot tell, but the transition is instant and smooth with no audible clicks or pops. The distortion can come in and go randomly. For example, I had one recording with distortion coming in at about 2 minutes plus and it remained until about 2hr10min when the distortion went away. Sometimes it didn't go away; other times it came in about an hour later. I also had once where the distortion last only for about 6 minutes somewhere in the middle of a 2.25 hours recording...all in all, it occurs at random. And I do on rare occasions had distortion-free recordings.
This problem also occurs on an iMac G5 with a Alesis MultiMix 12USB mixer, and in another Vara Software's Videocue PRO software which uses QuickTime for recording and playback. QuickTime 7.0.x and 7.1 also had this problem.
Because of this problem, I may need to use a convoluted method to stream and record to disk via QuickTime. By the way, I also tried streaming to another local subnet IP address just as a troubleshooting without success.

I too am having distortion problem (Sorry no solution here).
Using OS 10.4.8, QT7.1.3, & Adobe Premiere 6.5 on a G4.
After I down loaded QT 7.1.3, my problems started. Is this when your problems started too?
Audio is in "slow motion" sound when editing. On rare occations, it sounds correct for 10 sec or so but sync is out and eventually reverts to "slow motion" sound. Even more bazar, when viewing a clip in a thumbnail preview, it works fine. So I know the orginal is good.
My contention is QT is causing this. All I want is my previous version of QT back. I think this might fix your problem too. Unfortunately, there is no reinstall that I can find that takes QT 7.1.3 off and puts QT 7.1.1or2. The reinstall QT 7.0.3 which is on the Apple website will not restall.
Looking for a reintall that will take QT 7.1.3 off, help anyone?

How to record with Mac camera

How can I record with my Mac camera

see
http://support.apple.com/kb/index?page=search&src=support_site.home.search&local e=en_GB&q=recording%20mac%20camera
You can record with Quick Time Player
or iMovie

Voice memos recorded since iOS7 missing when syncing

Hi All,
I regularly use voice memos to record lectures on my iPhone 4 and then transfer to computer for editing.
However, since I installed iOS7, all voice memos recorded since then show up on the phone itself, but not in iTunes (or the DeTune App) when I try to sync to my computer. It seems they're unrecognizable by iTunes.
I've tried rebooting the phone, the computer, etc, but after weeks of looking for a solution haven't found one.
Can anyone help please?

I have this same problem, voice memo from Jan 19th was synced ok,
but I did something different today, so they possibly caused it:
The recording is over an hour long, I usually record only about 5 minutes
I renamed the title with Edit function
I managed to get all my voice memos off my iPod touch using iFunBox which is a free app.
Download it here: http://www.i-funbox.com/ifunboxmac/
There's also a windows version on the site.

Local Voice Conversation Recording with VG224 (Dual home topology)

Similar Messages

Maybe you are looking for