Local Was is Down

Hello
I've a problem with my local java engine...
I've installed WAS 6.40 on my Pc ... I can work with Was but after 8 - 10 deploy the WAS fall down !!!
Can someone help me ??
best regards
Stefano

Hi Stefano,
If the server goes down after 30 minutes of work, it could be a licensing issue. Check in the /usr/sap/<SID>/<instance>/j2ee/cluster/server<N>/log/defaultTrace.trc the reason for shutting down. For more information on requesting and installing a license please refer to http://service.sap.com/licensekey.
Hope that helps!
Vladimir

Similar Messages

I have a Macbook Pro that was slowing down. The HD was nearly full as I do a video work. I removed over 400gb of photos and video and it made no difference. I ran disk inventory x and that says that there is only 60gb on the hard drive but disk utility sa

I have a Macbook Pro that was slowing down. The HD was nearly full as I do a video work. I removed over 400gb of photos and video and it made no difference. I ran disk inventory x and that says that there is only 60gb on the hard drive but disk utility says there is still 430gb on the HD. How do I remove what DU says is still there.
Thanks

You may notice a difference in available space statistics between Disk Utility, Finder, and Get Info inspectors. This is expected and can be safely ignored. The Finder displays the available space on the disk without accounting for the local snapshots, because local snapshots will surrender their disk space if needed.
About Time Machine's "local snapshots" on portable Macs

My iMac 8.1 was slowing down and had permissions problems. I backed everything up, and then re-installed. Now all I get is a black screen. Power+D gives me a hardware error message: HDD-1336. Help!

My iMac 8.1 (10.6.8 ) was slowing down and had recurrent permissions problems, mostly with Java. I backed everything up, and then re-installed from time machine. Now all I get is a black screen which says I need to reboot. Power+D gives me a hardware error message: 4 MOT/1/40000003: HDD-1336 or HDD-1327. When I reboot from the OSX CD and start disc utilities everything checks out OK. When I reload 10.5.2 from the OSX CD everything seems to work OK and no more permissions problems. But then I loose all my email and safari stuff. Anyone have any ideas short of going back to my old PC?

DonM. wrote:
Hi
Thanks for the help. No point in fooling around with it any more. Will I be able to use it as a monitor if I get a mimi mac?
Cheers. Don
No unfortunatley it's too old, you are referring to Target Display Mode which became avialble in 2009, your 2008 needs to have the HD replaced. I'd still do that if everything else is OK or you can simply buy a new MM and display or even a new iMac or an Apple refurbished iMac to save money.

Thanks so much for the offer of help. I'm using 10.9.2 OSX. I have Numbers 2.3 (554). I tried the new version but it was "dumbed down" so much (to make it usable on multiple platforms) that it was of no use on iMac. I still can't get my contacts to open

Thanks so much for the offer of help. I'm using 10.9.2 OSX. I have Numbers 2.3 (554). I tried the new version but it was "dumbed down" so much (to make it usable on multiple platforms) that it was of no use on iMac.
I still can't get my contacts to open in Numbers like they used to do. I have a group of five addresses in a test folder in Mail called "untitled group." But no amount of pasting, dragging, etc can get them to open up in Numbers. My "real" folder has almost 100 addresses so I can't do it one by one.
Thoughts?
Thanks again.
Bob

Bob,
You can place contacts in a table In Numbers by the following methods:
Numbers 2.3:
drag from contacts
Numbers 3.2
copy from contacts, then paste into Numbers
In both cases you need to open System preferences, then select the "Security & Privacy panel and allow Numbers aaccess your contacts information.

Computer was shut down and need to know how to retrieve important information from open tab that isn't showing in history and wasn't bookmarked

My computer was shut down with live work still needing to be completed within an open tab of Firefox. The site that I was working from had not been bookmarked and a saved link back to the site had not been done yet either. After starting my laptop back up and opening Firefox, I don't have anything in the history taking me back to the site. Can I get back to that session at all and if so how? Or how do I search?

You would really have to ask the app developer if there is a way to export the data.
As for adding a printer, you would need to purchase an AirPrint compatible printer and connect it to your wireless network.
By the way, your holiday letter/rant/Idon't even know what to call it... is completely inappropriate for these forums.

How I retrieve a purchased app that was taken down?

Hello. I would like to discuss with this problem that I have just encountered. Recently, I've chosen a back up storage and then iCloud was restoring my iPhone. There was a link of the app showing that it was there then suddenly it vanished off the iPhone screen. I've tried to restore it again and again. Same thing happened, link of the app was showing and then in a matter of seconds, it vanished. I checked my apple account(I have also checked in the hidden purchased apps, I got zero results) , the app that I have purchased for $3.99 was no longer existed. They said that the developer of the app(Yu Zeng) took it down, due to lack of office use. I really loved that app and I paid good money for it. So the question is,"How do I retrieve a purchased app that was taken down? Or "Is it possible to retrieve a purchased app that was taken down?" If there is any solution to this matter, please do tell. I really need a lot of help!
Video Downloader Pro is the app that I really loved.
Message was edited by: Zammy95

osKco wrote:
I have not tried to repurchase it since it does not say installed when I look it up
Because it is not installed on your iPad.
If you are signed inot ht eiTunes store wioth the same account used to purcahse that app, click on Buy and it will tell you that you have already purcahsed it and ask if you want to redownload it.

Error (2931) VMM is unable to complete the request. The connection to the VMM agent on the virtualization server (host.domain.local) was lost.

Experts,
kindly advice for this error when create vm from a templates, while i'm not having this issue when create the vm to another host from the same templates,
firewall is disabled and no antivirus on the host.
The network and the ping is very stable, and the WS-Management service is running on the host,
Host : windows server 2012 R2
VMM : 2012 R2 3.2.7895.0
VMM updated from RU2 to RU5
Error (2931)
VMM is unable to complete the request. The connection to the VMM agent on the virtualization server (host.domain.local) was lost.
Unknown error (0x80338029)
Recommended Action
Ensure that the Windows Remote Management (WS-Management) service and the VMM agent are installed and running and that a firewall is not blocking HTTPS traffic.
This can also happen due to DNS issues. Try and see if the server (ms-lab-01.eccsolutions.local) is reachable over the network and can be looked up in DNS. You can ping the virtualization server from VMM management server and make sure that the
IP address returned matches the IP address locally obtained from the virtualization server.
If the error still persists, restart the virtualization server, and then try the operation again.
Ahmad Samir | MCSE 2003, MCSE 2012 Private Cloud | MCTS: SCOM 2007, Lync 2010, Exchange 2010.

Ok I will try another template,
and the drop happen in the customization after deploying the VHDX file as my first image.
I had this answer from partner forum. but i didn't try it yet
Backup your VMM database and then check the
tbl_VMM_Lock table in the
VMM database to see if it has any locks listed, do this after stopping the System Center Virtual Machine Manager Service.
If there are locks listed in the tbl_VMM_Lock
table you can clear them by executing the prc_VMM_ReleaseAllLocks
stored procedure.
Ahmad Samir | MCSE 2003, MCSE 2012 Private Cloud | MCTS: SCOM 2007, Lync 2010, Exchange 2010, Server Virtualization.

A pages document was shut down and not saved where can I still find this document

Need help finding a pages document that was typed up and then the computer was shut down and We are not sure if it had been saved. Can we locate this document if it was never saved and how do we do that? Please Help!!!

If the battery is dead the only way to find it is to physically look for it.

I've lost the bookmarks icons after my internet was shut down and then brought back up.

My internet was shut down by accident by Comcast. When they corrected this and turned it back on, my icons in Bookmarks disappeared. The texts are still there, but without icons. Having the icons is very helpful.

It worked!!! Thank you very much Matt_G. I had to close Firefox before the icons appeared again.

Itunes plays music as if I was holding down fast forward

I just downloaded the newest version of itunes and when you begin listening to music it starts off okay but about half way through a song it starts playing it as if I was holding down the fast forward button...anyone else experiencing this problem?

hmmmm. given that you've got a Dell, we'd better check on the possibility from the following document:
iTunes for Windows: Songs Play Faster Than Normal on Some Dell Computers
here's a link through to the (XP) Dell downloads page for your 8250:
Dimension 8250 (XP)

Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What I can do?

Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What can I do?

Try booting to the Recovery drive, running Disk Utility and Repair disk and Repair Permissions.
1. Reboot and immediately hold down command and R (two keys).
2. When you see the screen shown on this page, select Disk Utility and continue.
3. When DU is running, select the hard drove on the left, First Aid and Repair Disk.
4. After Repair Disk, click Repair Permissions.
Quit DU and restart.

HT201263 My I phone 5 got hot actually very hot.. Boiling hot and then the battery charge went from 100 to 50 and within a minute was shut down and never on again...I bought the phone from the apple store in manhattan new York I bout the unlocked phone

My I phone 5 got very hot actually boiling hot although it was not exposed to any external heat ...it was fully charged and within 10 minutes it was half charged 50% and within one minute it was shut down ... Tried re charging through the computer and through the power but no response the phone is totally black... Tried connecting to I tunes and no response.. The thing is that I bought the I phone 5 on the 23 rd December 2012 from Manhattan new York and I live in Qatar and there is no service centre in qatar .. I am now without a phone although I paid 706$ and that's a big amount .. I am disappointed .. I bought an original phone from the original apple store and I ended up with a product that didn't survive for a month.. What quality assurance do the apple have on their products...I need help here

I appreciate the fast reply.
Well, I checked the iphone and the battery charged going from the bolt to the plug in the upper right hand corner very quickly. On my other cell phones, charging took a REAL long time.
Again, is this normal? I unplugged the iphone from the charger and I am going to monitor the battery power today. I find it odd that the battery would work on standby for 4 days without recharging the battery and then start doing something wacky. Any thoughts?

My iphone was broke down after got electric shock ,is it still can repair or not?

Hi,
my iphone was broke down after got electric shock ,is it still can repair or not?

You can share the purchasing Apple ID in Settings > iTunes & App Stores > Apple ID: (your dad's appleid here)
With all other Apple services, iMessage, iCloud, Game Center, FaceTime etc. use your own Apple ID.

When I play my Ipod shuffle 3rd gen there's a moment when I start hearing interference until it stops playing, when I turn it off and on again it starts playing from the first song all over again, and once it sounded like the music was slowing down.

My Ipod shuffle 3rd gen starts playing songs with some kind of interference until it stops playing, when I turn it off and on again it starts playing from the first song all over again, and once it sounded like the music was slowing down. First I thought it was the earphones, but I exchanged them for newer ones and so far its the same

You may want to do a Restore on the shuffle in iTunes. The Restore button is on the shuffle's Summary screen in iTunes. This will erase the shuffle, re-install its software, and set it to default settings. If it's a software or data corruption glitch, the Restore should fix it. After the Restore, reload or resync your songs, and try it again. As a test, you may want to initially select a small number of songs to put back on the shuffle.

I am john and I need help downloading a progmmme yesterday and wanted to finish downloading open it and I am not told me that the program was shut down unexpectedly and restart ponia not opened and went back to download it and not opened my back probe to

i am john and I need help downloading a progmmme yesterday and wanted to finish downloading open it and I am not told me that the program was shut down unexpectedly and restart ponia not opened and went back to download it and not opened my back probe to turn off the computer and there was no case

i am john and I need your help yesterday bought a program called DJAY when I finish the download and got an error opened and I saw him there was no case to install and thank you for your help anyway

Local Was is Down

Similar Messages

Maybe you are looking for