LocalDevelopment configuration does not have KMC-CM SC in it
hi,
My LocalDevelopment configuration does not have KMC-CM Software component in it. How do I get it there.
List of SCs in my LocalDevelopment configuration is attached as screenshot with this thread
thank you !
seventyros
Hi Roshan,
I think, you have not chosen the source code visibility option for your software component.
I could not remember the config steps, as I had worked on it a long time back.
Some other colleagues may help here....
Thanks,
Biroj
Similar Messages
-
OK; have been trying to setup a test VM based RDS deployment for a few days now with no luck.
this error mentioned above:
"Server <server name> either does not have a virtual switch configured or none of the configured virtual switches have an IP address assigned" error is driving me nuts!
I have removed and re-added the RD Virtualization Host role numerous times, each time having the "create a virtual switch" checkbox selected, but it did NOT create any virtual switch.
I created the external virtual switch manually and tried to create the desktop collection again, no luck with the same error.
a few questions:
1. you don't assign IP to a switch! you assign IP to Network Interfaces. why does the error puts it like this?! it is technically wrong.(yeah yeah I know all about how you'd assign IP to managed switches in real world to telnet into them and manage them.
you know better than me that it is not the case here!)
2.the RDS Virtualization hosts are using their wifi card as the card for the virtual switch. could that be the reason? I even disabled their unplugged wired NIC just to make sure that the wifi is the only available option for the RDS wizard to use for the
virtual switch creation; but it didn't use it and it didn't create any virtual switch automatically.
3.if WIFI nic is indeed the reason, is it your suspension or an official documents is there somewhere stating so (that the WIFI NICS on a Virtualization hosts are not supported as the hub for a virtual switch).
4.what are the properties of the virtual switch the RDS requires? does it have to be external? why can't it work even with my manually created external switch?
5.how would I fix it?
P.S: the environment is made up of 2 laptops, having windows 2012 R2 trial installed on them, using their wifi to connect to the out world. no cable is plugged into their wired NIC card.Hi,
Thank you for posting in Windows Server Forum.
The simplest short term solution was to connect each computer to a small switch that had no other connectivity. This brought up the link light on the external NIC and allowed the creation of the collection to complete. You need to use an external switch. You
can create one external switch which might fix the problem.
Please check below article for information.
VDI Deployment Error About Virtual Switch
In addition please referthis article for information regarding virtual switch.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support -
Workflow Manager Configuration - Certificate with Thumbprint does not have a private key
After following the video series on how to install and Configure Workflow Manager into SharePoint 2013 http://technet.microsoft.com/en-us/library/dn201724(v=office.15).aspx,
I get to the 'Configure Certificates' section in the Workflow Manager Configuration: I browse to our wildcard certificate and select it.
When I try to move to the next page of the configuration wizard, I get the following red error under the certificate:
Certificate with thumbprint LONG STRING does not have a private key.
I checked the properties of the certificate, and it says: You have a private key that corresponds to this certificate.
What am I missing??
Thank you.
macrelHi,
According to your post, my understanding is that you got error under the certificate.
Please make sure you configure the workflow manager correctly.
More information:
Install and configure workflow for SharePoint Server 2013
Installing and Configuring Workflow Manager 1.0
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Problem configuring Adobe Forms: ADSUSER does not have access to method...
I hope all of you are doing well...
So here is a rundown on what is happening.
Enviroment:
Netweaver 7.0
ECC 6.0
Abap and Java stacks are installed on the same system.
Problem:
I am trying to configure Adobe Print forms and not Interactive forms. When I run the test: FP_PDF_TEST_00
I get the following error:
Error Code: 100.102
SOAP Runtime Exception: CSoapExceptionFault : SOAP fault found in SOAP document /User ADSUSER does not have access to method rpData./<ns1:com.sap.engine.services.ejb.exceptions.
When I run the rpData test from the J2EE server I get the following response:
HTTP/1.1 500 Internal Server Error
Connection: close
Server: SAP J2EE Engine/7.00
Content-Type: text/xml; charset=UTF-8
Date: Fri, 03 Oct 2008 15:56:51 GMT
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" ><SOAP-ENV:Body><SOAP-ENV:Fault><faultcode>SOAP-ENV:Client</faultcode><faultstring>User ADSUSER does not have access to method rpData.</faultstring><detail><ns1:com.sap.engine.services.ejb.exceptions.BaseEJBException xmlns:ns1='http://sap-j2ee-engine/client-runtime-error'>User ADSUSER does not have access to method rpData.</ns1:com.sap.engine.services.ejb.exceptions.BaseEJBException></detail></SOAP-ENV:Fault></SOAP-ENV:Body></SOAP-ENV:Envelope>
I would really appreciate all the help that I can get.
Thanks...Thanks for the tip,
I had actually gone through the note before and tried out a couple of tips that were suggested in the note. I am still having the issue and believe that it might be due to the fact that I do not have a Credentials file installed.
I am applying for the credential and will see what happens.
thanks,
Saif -
I was upgrading my SP 2010 server to SP1 but at step 8 i get this error. I cleared configuration cache, moved the file out of the folder, got the same file from other farm where upgrade went smooth, but no success yet. I am at loss.
So i have another farm in SP1. As a fall back option i was thinking to move content database on that server and start hosting site there but now i find out pre sp1 content databse cannot be moved to sp1 farm just through content database migration.
Do only choice i have is to build dummy sp 2010 environment, move content database there and do upgrade there and move it to final production environment?
Is there anything else i can do for either upgradeing the current sp 2010 or moving it to new 2010 already on SP1?
Can pre sp1 2010 content db be moved to sp2013 sp1 directly?
AditHi ,
How many SharePoint servers do you have? If you have more than one SharePoint server, you need to install SP1 on all servers in the farm.
Make sure you run SharePoint 2010 configuration wizard using “Run As administrator”.
Please check the log to find more information about this issue.
In addition, here is a similar post, please take a look at:
http://sharepointnomad.wordpress.com/2014/02/23/fixing-sharepoint-2010-configuration-wizard-error-webconfig-accsrv-xml-does-not-have-element-configurationconfigsectionssectiongroupnamesharepoint-or-it-is-invalid/
Best Regards,
Wendy
Wendy Li
TechNet Community Support -
Today I tried to configure JAVA APM on a CentOS 6.4 server with tomcat6 installed through the normal RPM package. Adding this server to SCOM was no problem and it shows itself as a 'Deep Monitored Configuration'. The last part of enabling
JAVA APM fails. I have followed the following process:
1. Imported the JAVA APM MP's
2. Extracted the JAVA APM Files
3. Copied those files to my CentOS server
4. Added the JAVA_OPTS to my tomcat configuration file
5. Restarted Tomcat
When I look for the log file which needs to be created through the installation of the APM agent it cannot be find. When I look into my Catalina.out file I see the following errors:
Mar 05, 2014 7:05:16 PM com.microsoft.ManagementServices.APMAgent.Log.SystemLogger error
SEVERE: Java APM Agent initialization failed: SEAgent.config.xml does not have a valid event sender configured
com.microsoft.ManagementServices.APMAgent.Exception.ApmException: SEAgent.config.xml does not have a valid event sender configured
at com.microsoft.ManagementServices.APMAgent.AgentThreadManager.<init>(Unknown Source)
at com.microsoft.ManagementServices.APMAgent.AgentThreadManager.<init>(Unknown Source)
at com.microsoft.ManagementServices.APMAgent.Agent.Monitor.AgentContext.<init>(Unknown Source)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
at java.lang.reflect.Constructor.newInstance(Constructor.java:525)
at com.microsoft.ManagementServices.APMAgent.Agent.Startup.AgentContextLoader.loadContext(Unknown Source)
at com.microsoft.ManagementServices.APMAgent.Agent.Startup.Agent.premain(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:601)
at sun.instrument.InstrumentationImpl.loadClassAndStartAgent(InstrumentationImpl.java:382)
at sun.instrument.InstrumentationImpl.loadClassAndCallPremain(InstrumentationImpl.java:397)
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
at java.lang.reflect.Constructor.newInstance(Constructor.java:525)
... 15 more
Caused by: com.microsoft.ManagementServices.APMAgent.Exception.ApmException: Error registering MBean: com.microsoft.ManagementServices.APMAgent:type=COUNTER
at com.microsoft.ManagementServices.APMAgent.EventSender.MBeanEventLog.registerMetricMBeans(Unknown Source)
at com.microsoft.ManagementServices.APMAgent.EventSender.MBeanEventLog.<init>(Unknown Source)
at com.microsoft.ManagementServices.APMAgent.EventSender.MBeanEventLog.<init>(Unknown Source)
at com.microsoft.ManagementServices.APMAgent.AgentThreadManager.<init>(Unknown Source)
at com.microsoft.ManagementServices.APMAgent.AgentThreadManager.<init>(Unknown Source)
at com.microsoft.ManagementServices.APMAgent.Agent.Monitor.AgentContext.<init>(Unknown Source)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
at java.lang.reflect.Constructor.newInstance(Constructor.java:525)
at com.microsoft.ManagementServices.APMAgent.Agent.Startup.AgentContextLoader.loadContext(Unknown Source)
at com.microsoft.ManagementServices.APMAgent.Agent.Startup.Agent.premain(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:601)
at sun.instrument.InstrumentationImpl.loadClassAndStartAgent(InstrumentationImpl.java:382)
at sun.instrument.InstrumentationImpl.loadClassAndCallPremain(InstrumentationImpl.java:397)
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
at java.lang.reflect.Constructor.newInstance(Constructor.java:525)
... 15 more
Caused by: com.microsoft.ManagementServices.APMAgent.Exception.ApmException: Error registering MBean: com.microsoft.ManagementServices.APMAgent:type=COUNTER
at com.microsoft.ManagementServices.APMAgent.EventSender.MBeanEventLog.registerMetricMBeans(Unknown Source)
at com.microsoft.ManagementServices.APMAgent.EventSender.MBeanEventLog.<init>(Unknown Source)
at com.microsoft.ManagementServices.APMAgent.EventSender.MBeanEventLog.<init>(Unknown Source)
... 19 more
Mar 05, 2014 7:05:16 PM com.microsoft.ManagementServices.APMAgent.Log.SystemLogger info
INFO: Java APM Agent loading failed (Build: 1.10.100.15, Label: NotFromLabel, BuildDate: 20131112)
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
at java.lang.reflect.Constructor.newInstance(Constructor.java:525)
at com.microsoft.ManagementServices.APMAgent.Agent.Startup.AgentContextLoader.loadContext(Unknown Source)
at com.microsoft.ManagementServices.APMAgent.Agent.Startup.Agent.premain(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:601)
at sun.instrument.InstrumentationImpl.loadClassAndStartAgent(InstrumentationImpl.java:382)
at sun.instrument.InstrumentationImpl.loadClassAndCallPremain(InstrumentationImpl.java:397)
Caused by: java.lang.InstantiationException: Monitor initialization failed: SEAgent.config.xml does not have a valid event sender configured
at com.microsoft.ManagementServices.APMAgent.Agent.Monitor.AgentContext.<init>(Unknown Source)
... 12 more
Does anyone have seen this error before? Can someone help me with this one?
Thnx,I'm running tomcat on a CentOS release 6.4 (Final) server. I installed Tomcat 6 through an RPM from the CentOS sources. I have installed Apache Tomcat/6.0.24 wit JVM version 1.7.0_09-icedtea-mockbuild_2013_01_16_18_52-b00, the JVM Vendor is Oracle Corporation.
My tomcat configuration needs to be done in '/etc/tomcat6/tomcat6.conf'
I installed the APM Agent in the path '/opt/apm/' with the rights 40755 (root/root). The files have the following rights:
-rw-rw-r-- 1 root tomcat 32046 Mar 3 15:38 apm_facade.jar
-rw-rw-r-- 1 root tomcat 244819 Mar 3 15:38 apm_monitor.jar
-rw-rw-r-- 1 root tomcat 38110 Mar 3 15:38 apm_producers.jar
-rw-rw-r-- 1 root tomcat 207006 Mar 3 15:38 asm-all-3.3.1.jar
-rw-rw-r-- 1 root tomcat 4157 Mar 3 15:38 ASM_Third_Party_Notices.txt
-rw-rw-r-- 1 root tomcat 241368 Mar 3 15:38 DispatcherStub.dll
-rw-rw-r-- 1 root tomcat 36880 Mar 3 15:38 pmonitor.config.xml
-rw-rw-r-- 1 root tomcat 2625 Mar 3 15:38 SEAgent.config.xml
-rw-rw-r-- 1 root tomcat 830 Mar 5 15:19 Starter.properties
The above rights are equal to the /etc/tomcat6 directory with the tomcat configuration files.
In the tomcat6.conf I have added the following entries:
#Microsoft SCOM APM
JAVA_OPTS="${JAVA_OPTS} -Djava.library.path=/opt/apm"
JAVA_OPTS="${JAVA_OPTS} -javaagent:/opt/apm/apm_facade.jar -Xbootclasspath/p:/opt/apm/apm_producers.jar -Xbootclasspath/p:/opt/apm/apm_facade.jar"
When I look into the running tomcat process I see the following:
tomcat 17401 1 0 Mar05 ? 00:00:39 /usr/lib/jvm/jre/bin/java -Djava.library.path=/opt/apm -javaagent:/opt/apm/apm_facade.jar -Xbootclasspath/p:/opt/apm/apm_producers.jar -Xbootclasspath/p:/opt/apm/apm_facade.jar
-Djavax.sql.DataSource.Factory=org.apache.commons.dbcp.BasicDataSourceFactory -Djava.library.path=/opt/apm -javaagent:/opt/apm/apm_facade.jar -Xbootclasspath/p:/opt/apm/apm_producers.jar -Xbootclasspath/p:/opt/apm/apm_facade.jar -Djavax.sql.DataSource.Factory=org.apache.commons.dbcp.BasicDataSourceFactory
-classpath :/usr/share/tomcat6/bin/bootstrap.jar:/usr/share/tomcat6/bin/tomcat-juli.jar:/usr/share/java/commons-daemon.jar -Dcatalina.base=/usr/share/tomcat6 -Dcatalina.home=/usr/share/tomcat6 -Djava.endorsed.dirs= -Djava.io.tmpdir=/var/cache/tomcat6/temp
-Djava.util.logging.config.file=/usr/share/tomcat6/conf/logging.properties -Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager org.apache.catalina.startup.Bootstrap start
My Starter.Properties looks like this:
# Jars to load by inner classloader.
# Use semicolons to separate the JAR entries
ClassPath=apm_monitor.jar;asm-all-3.3.1.jar;apm_producers.jar
# Path to pmonitor.config
MonitorConfigFileName=pmonitor.config.xml
# Path to SEAgent.config
AgentConfigFileName=SEAgent.config.xml
# Log file name
# Example for full-path location:
# LogFileName=c:\\tracelog\\apm-java-agent.log
# Example for relative path (to agent jar files):
# LogFileName=apm-java-agent.log
LogFileName=apm-java-agent.log
# Log level (SEVERE, WARNING, INFO, CONFIG, FINE, FINER, FINEST)
# A level of FINER or FINEST may expose Personally identifiable
# information (PII) in the log file. The levels below INFO are
# intended for debugging and diagnostic use only.
LogLevel=FINEST
The 'apm-java-agent.log' is not created on the system. The only logging is done in the catalina.out. When restarting tomcat I see the following entries in te log file:
INFO: Initializing Java APM Agent (Build: 1.10.100.15, Label: NotFromLabel, BuildDate: 20131112)
Mar 06, 2014 9:35:21 AM com.microsoft.ManagementServices.APMAgent.Log.SystemLogger info
INFO: Java APM Agent loading succeeded (Build: 1.10.100.15, Label: NotFromLabel, BuildDate: 20131112)
Mar 06, 2014 9:35:21 AM com.microsoft.ManagementServices.APMAgent.Log.SystemLogger info
INFO: Initializing Java APM Agent (Build: 1.10.100.15, Label: NotFromLabel, BuildDate: 20131112)
Mar 06, 2014 9:35:21 AM com.microsoft.ManagementServices.APMAgent.Log.SystemLogger warning
WARNING: Failed registering the COUNTER MBean
Mar 06, 2014 9:35:21 AM com.microsoft.ManagementServices.APMAgent.Log.SystemLogger error
SEVERE: Java APM Agent initialization failed: SEAgent.config.xml does not have a valid event sender configured
Mar 06, 2014 9:35:21 AM com.microsoft.ManagementServices.APMAgent.Log.SystemLogger info
INFO: Java APM Agent loading failed (Build: 1.10.100.15, Label: NotFromLabel, BuildDate: 20131112)
Hope this gives your some more background around my problem, I double checked the permissions.. -
I have an Apple Configurator install that wont recognize an iPad when I attach it via USB. I cant prepare it or refresh it. It was supervised. I get an error message that says "policy does not have correct profile data". At some point there was a mismatch between the profile on the iPad and the MAC server. The profile on the MAC server has been deleted and the iPad has been erased and reset to default. I need to be able to get Configurator to recognize this device to prepare it for deployment and issue Apps to it. Please help!!
Run the application 'Terminal.app' which you will find in '/Applications/Utilities' on your Macintosh.
Type this into it: defaults delete com.apple.configurator PreprationSavedPolicyDefaultsKey
Hit the return key.
If you get no error message, it worked, and you can quit the app. -
Apple Configurator: "Policy does not have correct profile data."
I keep getting the message "Policy does not have correct profile data." when I'm trying to prepare new devices in Apple Configurator 1.2. Existing devices work fine, and I was able to prepare a few new devices before getting this error. Any advice besides "wipe and restart" AGAIN?
defaults delete com.apple.configurator PreprationSavedPolicyDefaultsKey
should eliminate the problem, though it will partially reset the default settings in the Prepare pane. Did you delete a configuration profile that had been checked in the Prepare settings? -
When I try to log on to my DC it says "The security database on the server does not have a computer account for this workstation trust relationship". It won't let me log on. I installed another server server 2012r2 (its virtual )
and I can get to ADSI edit.
I think what happened was I had a pc that could not connect without unplugging the network cable. So I found this fix
FIX: “The security database on the server does not have a computer account for this workstation trust relationship”2032011
I’ve seen a lot of solutions, or suggestions rather, with regard to the error in the title of this post. In my experience, the problem can almost always be resolved without extra domain add/removes and reboots, which is the most prevalent solution I have
seen around. Usually, this issue is due to a mismatch between attributes of the computer account in Active Directory and those values on the system itself. Here are the steps I take to fix this issue when it crops up:
Open up Active Directory Users & Computers pointed to the domain the computer account resides in
From the “View” pull-down menu, make sure that “Advanced Features” is checked
Navigate to the part of your organizational unit (OU) structure where the computer account for this server resides
Open the Properties for the computer object
Choose the “Attribute Editor” tab on the Properties dialog box
Check the Attributes dNSHostName & servicePrincipalName – anywhere that a fully qualified hostname is specified (e.g. myserver.mydomainname.com), make sure that the entry matches the hostname
you have configured when you go here on your server: Start -> Computer -> Right-Click, Properties -> Change Settings (under “Computer name, domain… settings”) -> Full Computer Name
As an example, for a fictitious W2K8 R2 server whose Full Computer Name is “srv1.mydomainname.com”, these attribute/value pairs should be in Active Directory:
dNSHostName:
srv1.mydomainname.com
servicePrincipalName:
HOST/SRV1
HOST/srv1.mydomainname.com
RestrictedKrbHost/SRV1
RestrictedKrbHost/srv1.mydomainname.com
TERMSRV/SRV1
TERMSRV/srv1.mydomainname.com"
Not reading it carefully I add a computer with the same name as the pc having the issue and followed the above. The problem is that I did not notice that the spn did not want the name of my server (serv1) but the name of the trouble
pc.
dcdiag output
PS C:\Users\administrator.TOM> dcdiag.exe
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
***Error: DC3 is not a Directory Server. Must specify /s:<Directory Server> or /n:<Naming Context> or nothing to
use the local machine.
ERROR: Could not find home server.
PS C:\Users\administrator.TOM> dcdiag.exe /s:DC2
Directory Server Diagnosis
Performing initial setup:
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site\DC2
Starting test: Connectivity
The host 9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM could not be resolved to an IP address. Check the DN
server, DHCP, server name, etc.
Neither the the server name (DC2.TOM) nor the Guid DNS name (9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM)
could be resolved by DNS. Check that the server is up and is registered correctly with the DNS server.
Got error while checking LDAP and RPC connectivity. Please check your firewall settings.
......................... DC2 failed test Connectivity
Doing primary tests
Testing server: Default-First-Site\DC2
Skipping all tests, because server DC2 is not responding to directory service requests.
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : TOM
Starting test: CheckSDRefDom
......................... TOM passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... TOM passed test CrossRefValidation
Running enterprise tests on : TOM
Starting test: LocatorCheck
......................... TOM passed test LocatorCheck
Starting test: Intersite
......................... TOM passed test Intersite
PS C:\Users\administrator.TOM> regsvr32 schmmgmt.dll
PS C:\Users\administrator.TOM> netdig /fix
netdig : The term 'netdig' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdig /fix
+ ~~~~~~
+ CategoryInfo : ObjectNotFound: (netdig:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> Setup /PrepareSchema
Setup : The term 'Setup' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ Setup /PrepareSchema
+ ~~~~~
+ CategoryInfo : ObjectNotFound: (Setup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> netdiag /test
netdiag : The term 'netdiag' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdiag /test
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (netdiag:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> nslooup
nslooup : The term 'nslooup' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ nslooup
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (nslooup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM>Ok fixed.
At a elevated cmd prompt run ;
C:\Users\administrator.TOM>setspn -x
As you can see the DC serv1 had duplicate SPNs.
Checking domain DC=TOM
Processing entry 1
HOST/serv1.TOM is registered on these accounts:
CN=SERV1,OU=Domain Controllers,DC=TOM
CN=C00049,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/TOWN-HBWJ29ZOQC is registered on these ac
counts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/town-hbwj29zoqc.TOM is registered on thes
e accounts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
RestrictedKrbHost/serv1 is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
RestrictedKrbHost/serv1.TOM is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
found 5 groups of duplicate SPNs.
Went to the computers OU and changed computer c00049 to the correct SPN. Now I have a new issues, I'll start a new thread. -
Folks,
Hello.
I am installing PeopleTools 8.53 with Oracle Database Server 11gR1 and OS Oracle Linux 5.10.
Data Mover Bootstrap and Application Designer can log into Database instance successfully. My procedure to run PIA is below:
Step 1: start Oracle Database Server and LISTENR is listening.
Step 2: start Application Server ./psadmin and 8 processes are started.
Step 3: start WebLogic Server PIA /opt/PT8.53/webserv/PT853/bin/startPIA.sh
In Browser, http://192.168.196.102:8000/ps/signon.html comes up successfully. But when sign in using UserID PSADMIN and password "myname", I get the error message in Browser as below:
The application server is down at this time.
CHECK APPSERVER LOGS. THE SITE BOOTED WITH INTERNAL DEFAULT SETTINGS, BECAUSE OF: bea.jolt.ServiceException: Invalid Session
We've detected that your operating system is not supported by this website. For best results, use one of the following operating systems:
Mac OS X 10.6(Snow Leopard)
Mac OS X 10.5(Leopard)
iPad
Oracle Linux Enterprise
Mac OS X 10.4(Tiger)
Windows 8
Windows 7
Mac OS X 10.7(Lion)
Regarding Application Designer, both Database Type "Oracle" and Connection Type "Application Server", UserID "PSADMIN" and password "myname" login successfully. I view TUXLOG (current Tuxedo log file) and its last screen is below:
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
I View APPSRV_1023.LOG (current server log file) and its content is below:
PSADMIN.32259 (0) [2013-10-23T18:55:12.134](0) Begin boot attempt on domain PT853
PSAPPSRV.32290 (0) [2013-10-23T18:55:35.701](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/1
PSAPPSRV.32290 (0) [2013-10-23T18:55:35.923](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_1/
PSAPPSRV.32290 (0) [2013-10-23T18:56:19.256](2) App server host time skew is DB+00:00:00 (ORACLE PT853)
PSAPPSRV.32290 (0) [2013-10-23T18:56:23.504](0) Server started
PSAPPSRV.32290 (0) [2013-10-23T18:56:23.507](3) Detected time zone is EDT
PSAPPSRV.32338 (0) [2013-10-23T18:56:25.793](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/2
PSAPPSRV.32338 (0) [2013-10-23T18:56:26.003](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_2/
PSAPPSRV.32338 (0) [2013-10-23T18:57:08.871](2) App server host time skew is DB+00:00:00 (ORACLE PT853)
PSAPPSRV.32338 (0) [2013-10-23T18:57:10.662](0) Server started
PSAPPSRV.32338 (0) [2013-10-23T18:57:10.663](3) Detected time zone is EDT
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.159](2) Min instance is set to 1. To avoid loss of service, configure Min instance to atleast 2.
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.168](0) PeopleTools Release 8.53 (Li nux) starting. Tuxedo server is APPSRV(99)/100
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.265](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSSAMSRV_100/
PSSAMSRV.32388 (0) [2013-10-23T18:57:59.414](0) Server started
PSSAMSRV.32388 (0) [2013-10-23T18:57:59.416](3) Detected time zone is EDT
PSADMIN.32259 (0) [2013-10-23T18:58:48.149](0) End boot attempt on domain PT853
PSAPPSRV.32290 (1) [2013-10-23T18:59:06.144 GetCertificate](3) Returning context. ID=PSADMIN, Lang=ENG, UStreamId=185906140_32290.1, Token=PT_LOCAL/2013-10-23-11.59.26.248432/PSADMIN/ENG/vSz0ix+wq8d+zPRwQ0Wa4hcek0Q=
~
I think the error is indicated in TUXLOG file "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password". The application password "myname" in Browser http://192.168.196.102:8000/ps/signon.html page is not working. I use the same password "myname" to login Data Mover Bootstrap mode, Application Designer, and Application Server psadmin configuration successfully. I have tried a few other passwords in Browser http://192.168.196.102:8000/ps/signon.html page but not working.
My question is:
How to solve Sign In issue on http://192.168.196.102:8000/ps/signon.html that is "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password" ?
Thanks.Dear Nicolas,
Hello. I have used the same password for "DomainConnectPswd" in the file Configuration.properties with that for Application Server setting. Eventually, UserID PSADMIN sign in http://192.168.196.102:8000/ps/signon.html successfully. PeopleTools 8.53 runs correctly in Browser.
It seems that whether upgrade Oracle Linux 5.0 to the latest 5.10 does not have effect !
I am very grateful to your great help for this installation of PT8.53 with Linux and Oracle Database ! -
SSL VPN message "This (client) machine does not have the web access privilege."
Hello!
I am trying to configure the SSL VPN (WebVPN) and I am almost done but when clicking on the URL's I configured in the bookmarks, I get the message "This (client) machine does not have the web access privilege. Please contact your SSLVPN provider for assistance." I looked through the many tutorials and guides in existence and none talks about such error and the fix for it. In fact, if I search the net for this error message I get only one match, in the Cisco website, where is say that "The client computer does not meet the security criteria of having web access functionality through the SSL VPN gateway." and as fix it gave this tip "Check the URL to the gateway or contact the administrator if it persists." So, nothing on the website about what this issue is and how to fix it. I will provide my IOS configuration and hopefully someone will spot the issue. Here it goes:
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname R1
boot-start-marker
boot-end-marker
logging message-counter syslog
no logging buffered
enable secret 5 $1$1LLX$u7aTc8XfNqPZhPVGwEF/J0
enable password xxxxxxxx
aaa new-model
aaa authentication login userAuthen local
aaa authentication login sdm_vpn_xauth_ml_1 local
aaa authorization network groupauthor local
aaa session-id common
crypto pki trustpoint TP-self-signed-1279712955
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1279712955
revocation-check none
rsakeypair TP-self-signed-1279712955
crypto pki certificate chain TP-self-signed-1279712955
certificate self-signed 01
3082023A 308201A3 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31323739 37313239 3535301E 170D3130 30333233 31313030
33375A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 32373937
31323935 3530819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100A8EF 34E3E792 36660498 9801F934 E8A41865 3599EA35 B073AC91 D7A53AF4
A4390D2F CB3DB2DE 936B28F0 A25F3CE1 6F40FD9E E79096F2 F89620E0 B31A7B34
649BBA22 AE44CB55 9F38BF0C 2F2770CF 8380C167 C17D760C 380E28E4 FF7D6874
9EFC310A 2AA60835 F1AA384F CD1A0173 19C98192 EBFBD531 24CB9203 EA9E7D54
B2C30203 010001A3 62306030 0F060355 1D130101 FF040530 030101FF 300D0603
551D1104 06300482 02523130 1F060355 1D230418 30168014 0D9D62EC DA77EAF3
11ABF64D 933633F9 2BA362DC 301D0603 551D0E04 1604140D 9D62ECDA 77EAF311
ABF64D93 3633F92B A362DC30 0D06092A 864886F7 0D010104 05000381 81006853
48ED4E3E 5721C653 D9A2547C 36E4F0CB A6764B29 9AFFD30A 1B382C8C C6FDAA55
265BCF6C 51023F5D 4AF6E177 C76C4560 57DE5259 40DE4254 E79B3E13 ABD0A78D
7E0B623A 0F2D9C01 E72EF37D 5BAB72FF 65A176A1 E3709758 0229A66B 510F9AA2
495CBB4B 2CD721A7 D6F6EB43 65538BE6 B45550D7 A80A4504 E529D092 73CD
quit
dot11 syslog
ip source-route
ip dhcp excluded-address 192.168.0.1 192.168.0.10
ip dhcp pool myPOOL
network 192.168.0.0 255.255.255.0
default-router 192.168.0.1
dns-server 87.216.1.65 87.216.1.66
ip cef
ip name-server 87.216.1.65
ip name-server 87.216.1.66
ip ddns update method mydyndnsupdate
HTTP
add http://username:[email protected]/nic/update?system=dyndns&hostname=<h>&myip=<a>
interval maximum 1 0 0 0
no ipv6 cef
multilink bundle-name authenticated
vpdn enable
vpdn-group pppoe
request-dialin
protocol pppoe
username cisco privilege 15 password 0 xxxxxxxx
crypto isakmp policy 3
encr 3des
authentication pre-share
group 2
crypto isakmp fragmentation
crypto isakmp client configuration group vpnclient
key cisco123
domain selfip.net
pool ippool
acl 110
crypto ipsec transform-set myset esp-3des esp-md5-hmac
crypto dynamic-map dynmap 10
set transform-set myset
reverse-route
crypto map clientmap client authentication list userAuthen
crypto map clientmap isakmp authorization list groupauthor
crypto map clientmap client configuration address respond
crypto map clientmap 10 ipsec-isakmp dynamic dynmap
archive
log config
hidekeys
interface Loopback0
ip address 10.11.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
interface Loopback2
description SSL VPN Website IP address
ip address 10.10.10.1 255.255.255.0
interface Loopback1
description SSL DHCP Pool Gateway Address
ip address 192.168.250.1 255.255.255.0
interface FastEthernet0
description $ES_LAN$
ip address 192.168.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
interface BRI0
no ip address
encapsulation hdlc
shutdown
interface FastEthernet1
interface FastEthernet2
switchport access vlan 2
interface FastEthernet3
interface FastEthernet4
interface FastEthernet5
interface FastEthernet6
interface FastEthernet7
interface FastEthernet8
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
bundle-enable
dsl operating-mode auto
interface Vlan1
no ip address
interface Dialer1
ip ddns update hostname myserver.selfip.net
ip ddns update mydyndnsupdate host members.dyndns.org
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip policy route-map VPN-Client
dialer pool 1
ppp chap hostname xxx
ppp chap password 0 xxxx
ppp pap sent-username xxx password 0 xxxx
crypto map clientmap
ip local pool ippool 192.168.50.100 192.168.50.200
ip local pool sslvpnpool 192.168.250.2 192.168.250.100
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
ip http authentication local
ip http secure-server
ip nat inside source static tcp 192.168.0.2 21 interface Dialer1 790
ip nat inside source static tcp 192.168.0.15 21 interface Dialer1 789
ip nat inside source list 102 interface Dialer1 overload
ip nat inside source static tcp 10.10.10.1 443 interface Dialer1 443
ip nat inside source static tcp 10.10.10.1 80 interface Dialer1 80
access-list 102 deny ip 192.168.0.0 0.0.0.255 192.168.50.0 0.0.0.255
access-list 102 permit ip 192.168.0.0 0.0.0.255 any
access-list 110 permit ip 192.168.0.0 0.0.0.255 192.168.50.0 0.0.0.255
access-list 144 permit ip 192.168.50.0 0.0.0.255 any
route-map VPN-Client permit 10
match ip address 144
set ip next-hop 10.11.0.2
control-plane
banner motd ^C
================================================================
UNAUTHORISED ACCESS IS PROHIBITED!!!
=================================================================
^C
line con 0
line aux 0
line vty 0 4
password mypassword
transport input telnet ssh
webvpn gateway MyGateway
ip address 10.10.10.1 port 443
http-redirect port 80
ssl trustpoint TP-self-signed-1279712955
inservice
webvpn install svc flash:/webvpn/svc_1.pkg sequence 1
webvpn install csd flash:/webvpn/sdesktop.pkg
webvpn context SecureMeContext
title "My SSL VPN Service"
secondary-color #C0C0C0
title-color #808080
ssl authenticate verify all
url-list "MyServers"
heading "My Intranet"
url-text "Cisco" url-value "http://192.168.0.2"
url-text "NetGear" url-value "http://192.168.0.3"
login-message "Welcome to My VPN"
policy group MyDefaultPolicy
url-list "MyServers"
functions svc-enabled
svc address-pool "sslvpnpool"
svc keep-client-installed
default-group-policy MyDefaultPolicy
aaa authentication list userAuthen
gateway MyGateway domain testvpn
max-users 100
csd enable
inservice
end
Thank you!Hi,
Please check SAP note:
2004579 - You cannot create a FR company from a Package
Thanks & Regards,
Nagarajan -
Client does not have permission to send as this sender
We have a CRM web application hosted on a server. When a user launches the site, the site provides facility to the customer to send the query into the system using the email. The website provides the filed for the customer to enter customer’s email ID. The
customer email address is used by the system to send the response back.
We are doing a new implementation for SMTP authentication for the emails send into the contact center using a public website. The flow of the system to use the SMTP authentication is:
Customer launches the website.
Customer chooses to send the his/her query using the email from the website.
Website asks for the customer’s address, so that the query can be
answered back to the provided email address say [email protected] .
We have an account configured on the MS-Exchange 2010 say [email protected]
So before sending the email the website system performs the SMTP Authentication using the credentials of [email protected]
Now the system creates the email MIME using the email address provided by the customer on the website i.e. say [email protected].
After successful SMTP authentication for the address [email protected] system starts sending the email.
Here we are facing the issue:
While sending the email if the customer’s address is also configured on the same exchange used by the system i.e. exchange on [email protected] is configured
then website system is able to relay or send the email.
If the customer’s address is not configured on the same exchange used by the system where [email protected] is configured then the system is not able to send the email it results into the error of: “Client
does not have permission to send as this sender [email protected].
In short if the website performs the SMTP authentication then it requires the FROM address configured on the same exchange used for the smtp authentication in the email MIME from address.
Configuration tries:
As suggested on various forums and at Microsoft tech group we tried following things but no success:
Checked the checkbox “Authenticated Users” selected “Accept any Sender”.
Created a new relay and given the IP of the machine hosting the website or trying to send the email
Run the command from the EMC “Exchange management console”
Add-AdPermission -Identity "Default Receive Connector" -User "NT AUTHORITY\Authenticated Users" -ExtendedRights ms-Exch-SMTP-Accept-Any-Sender.You can create a new connector to which everything is permitted - eg New-ReceiveConnector -Name "Anonymous Relay" -Usage Custom -PermissionGroups AnonymousUsers -Bindings 10.2.3.4:25 -RemoteIpRanges 192.168.5.77
-
We have installed RM client in the POC server .
Installed Deployment Agent in Dev server .
We created Configuration stages for POC->Dev.
We created a template with x copy deployer and selected source as build definition.
While releasing we faced following issue ,
The release was success in POC (Where RM client is installed), but in DEV environment (Which is different server)it got rejected because of the error
"Package location(Path) does not exist or deployer user does not have access"Hi Dhamayandhi
There is quite a bit to do to get RM working successfully. I have a soup-to-nuts guide on implementing continuous delivery with TFS and RM
here.
Cheers - Graham
Blog:
http://pleasereleaseme.net LinkedIn: -
Terminal server does not have any installed licenses
Good morning! Faced with a some trouble while configuring Terminal Server (Windows Server 2012 based). I selected licensing mode "Per User" and now I see this message:
“The Remote Desktop Session Host server is in Per User licensing mode and No Redirector Mode, but license server “server name” does not have any installed licenses with the following attributes:
Product version: Windows Server 2008 or Windows Server 2008 R2
Licensing mode: Per User
License type: RDS CALs”
So this is trial using of terminal server - I have 25 days yet but already today I can't connect to server using RDP. There is an error message about absent licensing server. How can I activate licenses in trial mode? Thank you for support.Hi,
Thank you for posting in Windows Server Forum.
From the error description it seems that your issue caused by setting up different Licensing mode. We need to install the proper RDS CAL on the License server. If the license server has installed licenses of the other mode, changing the licensing mode
for the terminal server may also resolve the issue.
To change the Licensing mode we can use RD Licensing diagnoser or by PowerShell command.
To change the licensing mode on RDSH/RDVH:
$obj = gwmi -namespace "Root/CIMV2/TerminalServices" Win32_TerminalServiceSetting
$obj.ChangeMode(value) - Value can be 2 - per Device, 4 - Per user
Please refer below article for information.
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
Have you installed License server on Server 2012 and you have RDS CAL of Server 2008 R2?
If that’s the case then first you need to purchase the RDS CAL for server 2012 and then you can configure on server 2012 because server 2012\R2 RDS CAL can work with lower version OS but Server 2008 R2 RDS CAL can’t work on Server 2012\R2.
Please check computability matrix.
RDS and TS CAL Interoperability Matrix
http://social.technet.microsoft.com/wiki/contents/articles/14988.rds-and-ts-cal-interoperability-matrix.aspx
Hope it helps!
Thanks.
Dharmesh Solanki -
The IC WebClient profile does not have a component 'ERP Sales Order'
Hi CRM Experts,
While creating the ERP Sales Order in web-IC
we have bumped into following error:
"The IC WebClient profile does not have a component 'ERP Sales Order'".
And also we are not able to see sales area data and Plant data in the drop down lists.
we have done the following settings:
1) ERP Sales Order Profile:we have defined ERP Sales Order profile,maintained RFC destinatin and assigned document type to ERP Profile.
2) Business Transaction Launcher: We have defined the Business Transaction Profile and assigned dependent business transaction.
3) We have assigned the Business Transaction Profile to the Navigation Bar Profile.
Please suggest me regarding above error also let us know did we miss any configuration?
Waiting for your valuable inputs.
Regards,
Sree.Hi Sree,
There is a setting needed for the IC webclient
ERP_SALES_ORDER
you need to define ERP sales order profile and assign it to your ic webclient profile.
And the ERP sales order scenario can only be used with a ERP 6.0 backend system, at least.
Hongyan
Maybe you are looking for
-
Itunes 10.6 will not install properly on my pc(windows vista)
When I try to install itunes 10.6 it says that there is a problem with my package and i should contact the vindor? Any sullutions?
-
How do i purchase games in app store
When i purchase it will ask for security code?
-
What are the best External Hard Drives In your opinions?
Hi, I have quite a few Mac's G5 Quad, Power Book, down to I-macs. I would like to ask all you apples users what you think are the best External Hard Drives? I have quite a few Lacie's but am dissapointed at their reliability. have had to send at leas
-
File dialog box slow in Mavericks
Running 10.9.2 Any application that tries to open the Finder file dialog box stops responding for 20-60 seconds and then recovers and opens the file dialog box. Automator, Mail, Preview, etc. all show this behavior. I've tried the suggestion to modif
-
LR 2.5 64 bit will not open catalogs from LR 2.5 32 bit
I just upgraded my PC from XP (32 bit) to Windows 7 (64 bit) and have changed LR (version 2.5) from 32 bit version to 64 bit version in the process I have used LR 2.x for a long time on my old system, and had created a good archive structure with LR