Locale and language problem after installation
hello
on my new laptop i install fresh copy of arch linux, my old installation work over 4 years , but now i chcange laptop and i do new system. So following by official wiki guide i install arch, i install PL language pack, setting locale.gen etc... so now KDE is half polish and half english, also i cant running some application for example User Managment , i cant run krusader (root) all app has install in eng language like firefox, chromium, etc, console is eng language, no polish fonts, i check everything 4-5 times and looks OK, i read Polish guide some video tutorial and should work but not.. any ideas ?
thanks
I work with Arabic and Hebrew going over from the keyboard 'command/space' and now with this command I get Spotlight.
You need to set the shortcuts in system prefs/spotlight and system prefs/keyboard and mouse
On my word processor Nisus or Mellel or on TextEdit even if I click on the Hebrew/Arabic icon and also choose the appropriate Hebrew/Arabic font it will only write in English.
That sounds bad. You might try setting up a new user account and see if it works when you are logged in there. If not, I would reinstall the OS.
None of these issues really have anything to do with the mini as such, so it might be better to post in the forums for Tiger:
http://discussions.apple.com/forum.jspa?forumID=758
http://discussions.apple.com/forum.jspa?forumID=756
And to post your question about Leopard in its printing forum:
http://discussions.apple.com/forum.jspa?forumID=1224
Similar Messages
-
Printing and language problem after re-installing BasePackage-Leopard ques?
I reinstalled BasePackage system as advised only it seems I reinstalled the entire package. What happened? It restarted and I received the window as if the computer was new and I had to fill in all the appropriate info. Well it worked fine saving all my settings etc. and I was able to verify permissions and repair. However MAIL started acting up and requested the password for my mail several times until I think that is solved.
But I have several problems now. I work with Arabic and Hebrew going over from the keyboard 'command/space' and now with this command I get Spotlight. On my word processor Nisus or Mellel or on TextEdit even if I click on the Hebrew/Arabic icon and also choose the appropriate Hebrew/Arabic font it will only write in English.
Aside from this I cannot print at all. I am using HP LaserJet 5MP with AppleTalk thru an ethernet connection on my router because of the outdated technology.I am using a 'bridge' from Asante technology for this.
I have an external Firewire HD which I have started up from now and I can print from this and have no problems with the Hebrew/Arabic.
Also I have not gone over to Leopard for the following reason. As mentioned above I am using a bridge thru ethernet to facilitate my printer. I have been told by many who have also not gone over to Leopard that there are driver problems with printers. Has this been fixed? Is it applicable to my situation?
Any help much appreciated.
Thanx.
SafedI work with Arabic and Hebrew going over from the keyboard 'command/space' and now with this command I get Spotlight.
You need to set the shortcuts in system prefs/spotlight and system prefs/keyboard and mouse
On my word processor Nisus or Mellel or on TextEdit even if I click on the Hebrew/Arabic icon and also choose the appropriate Hebrew/Arabic font it will only write in English.
That sounds bad. You might try setting up a new user account and see if it works when you are logged in there. If not, I would reinstall the OS.
None of these issues really have anything to do with the mini as such, so it might be better to post in the forums for Tiger:
http://discussions.apple.com/forum.jspa?forumID=758
http://discussions.apple.com/forum.jspa?forumID=756
And to post your question about Leopard in its printing forum:
http://discussions.apple.com/forum.jspa?forumID=1224 -
Hi,
There was ios 4.1 in my iphone3gs.i have tried to update it through itunes but there is a problem.After installation through itunes,there is problem that it is not activating my iphone and shows a message that your iphone could not be activated because the activation server is temporarily unavailable,try connecting your iphone to itunes to activate it,or try again in a couple of minutes.i tried many times but it again shows the same message,
after installation,when i connect my iphone to itunes it shows a message that we are unable to activate your iphone at this time please try again or contact customer care.please reply me urgently to resolve this problem.That is usually a symptom thet the phone was hacked or jailbroken. Was it?
-
Problem after installation Project Server 2013 CU September 9, 2014
Dear All,
I have some problems after installation
Project Server 2013 CU September 9, 2014 (Hotfix 2883072) on 3 level farm
Before installing CU, I have installed
SP1 for Project Server 2013, installation and configuration was successful.
Then I have installed CU and I have not get any errors during installation process. Then I have restarted servers and in SharePoint health analyzer got an error about patch/installation status
on WFE server.
I checked in Windows installed updates and hotfix is installed. I checked in SharePoint Update and Upgrade history and there were no errors during installation. But when I checked in Manage
Patch Status list I found an information:
Language Pack for SharePoint and Project Server 2013 - Russian
Microsoft Project Server Russian Language Pack 15.0.4420.1017 Installed
Hotfix for Microsoft Project Server 2013 (KB2883072) 64-Bit Edition
15.0.4649.1001 Missing/Required
Microsoft Project Server 2013
Microsoft Project Server English Language Pack 15.0.4571.1502 Installed
Hotfix for Microsoft Project Server 2013 (KB2883072) 64-Bit Edition
15.0.4649.1001 Missing/Required
Service Pack 1 for Microsoft Project Server 2013 (KB2880553) 64-Bit Edition
15.0.4571.1502 Installed
Microsoft Project Server Web Front End Server
15.0.4571.1502 Installed
Hotfix for Microsoft Project Server 2013 (KB2883072) 64-Bit Edition
15.0.4649.1001 Missing/Required
Service Pack 1 for Microsoft Project Server 2013 (KB2880553) 64-Bit Edition
15.0.4571.1502 Installed
If I run installation again I get message that nothing will be updated - no update needed.
Please help, how I can install missed packages?The problem was solved !
I solve it using two ways:
1. I have installed the hotfix for Project Server - Hotfix for Project Server 2013 October 14, 2014 KB 2889959 (Projectserverwfe-x-none.msp, Projectservermui-Language-Code.msp)
2. using command
Psconfig -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures -cmd installcheck -noinstallcheck
After two actions I was able to run SharePoint Configuration Wizard and upgrade database. Configuration completed successful. -
I am having trouble getting locales and languages to work as I would expect them to. I have created a tiny application (I'm a faces newbie still) and a bunch of localization files:
message.properties
messages_en.properties
message_fr.properties
messages_en_GB.properties
I add all of these languages to the faces-config.xml file setting the en_GB to be the default. When I set my browser to en_GB it picks up the file as I would expect. When I set it to fr I get the french version but I have to restart the server (Tomcat 5.0.18 running under Netbeans) to make it switch over. I would have thought that since the browser is now sending up a different locale faces would just switch automatically to using a different bundle without a restart but it seems to remember some how. This may be due to the incremental redeploy into tomcat but I'm not convinced as the behaviour is unpredictable.
What I am also confused about is the way defaults are dealt with. In the Core JavaServer Faces book it says that the base properties file will be used if a matching language resource can't be found. My observation is that it uses the default specified in the faces-config file. Is this right?
I'm also curious to know what happens when a non-exact match is sent up. For instance which resouce bundle, of the four listed, would be chosen if a browser specified en_US?
ThanksI had this problem this week. I guess this is a problem with Netbeans and Tomcat. When Netbeans detects your system language (LANG environment variable in Linux, for instance), its bundled Tomcat "sticks" with this locale and can't change it. If you try to run it with an external Tomcat, it may work.
-
my iphone 4s wifi and bluetooth problem after updating ios 8? please help me...
Hey there Abdulrahim0259,
I would recommend that you use the following 2 article to help troubleshoot the Wi-Fi and bluetooth issues you are seeing, respectively:
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
And:
iOS: Troubleshooting Bluetooth connections - Apple Support
Thank you for using Apple Support Communities.
All the very best,
Sterling -
Share and save problem after latest update
hello,
i have share and save problem after latest update - i have installed ps touch on nexus 5 about 2 months ago and until yesterday everything was good but after latest update i can't save and share images in ps touch ( i do reinstall this app but problem is still and app doesn't work properly ) how can i downgrade to the old version ? Could you fix this problem quickly ?i use app which called "aLogcat"
--------- beginning of /dev/log/main
I/dalvikvm(24476): Enabling JNI app bug workarounds for target SDK version 11...
D/dalvikvm(24476): GC_CONCURRENT freed 174K, 2% free 17054K/17264K, paused 2ms+2ms, total 15ms
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
--------- beginning of /dev/log/system
W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_MOVE, id[0]=0, x[0]=38.0, y[0]=-115.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=2, eventTime=27743080, downTime=27743066, deviceId=4, source=0x1002 }
W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_UP, id[0]=0, x[0]=38.0, y[0]=-115.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=0, eventTime=27743086, downTime=27743066, deviceId=4, source=0x1002 }
D/dalvikvm(24476): GC_FOR_ALLOC freed 122K, 1% free 17271K/17428K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 10K, 1% free 17434K/17604K, paused 7ms, total 7ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 65K, 2% free 17690K/17928K, paused 8ms, total 8ms
I/dalvikvm-heap(24476): Grow heap (frag case) to 17.615MB for 328336-byte allocation
D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 18010K/18252K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18011K/18252K, paused 9ms, total 9ms
I/dalvikvm-heap(24476): Grow heap (frag case) to 18.073MB for 479536-byte allocation
D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 18479K/18724K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 18481K/18724K, paused 2ms+1ms, total 10ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 6ms
I/dalvikvm-heap(24476): Grow heap (frag case) to 18.532MB for 479536-byte allocation
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18949K/19196K, paused 9ms, total 9ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 19418K/19668K, paused 1ms+1ms, total 10ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 7ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19592K/19844K, paused 8ms, total 8ms
I/dalvikvm-heap(24476): Grow heap (frag case) to 20.049MB for 933136-byte allocation
D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 20503K/20756K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 21416K/21668K, paused 1ms+1ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 50K, 2% free 22351K/22580K, paused 7ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 5K, 1% free 23900K/24140K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 1% free 25824K/26084K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 3411K, 14% free 24528K/28204K, paused 12ms, total 13ms
D/dalvikvm(24476): GC_CONCURRENT freed 2814K, 14% free 24256K/28204K, paused 2ms+1ms, total 11ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 4ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 9266K, 1% free 17270K/17424K, paused 10ms, total 10ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 15K, 1% free 17575K/17748K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 22K, 2% free 17875K/18072K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 2% free 18195K/18396K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18517K/18720K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18838K/19044K, paused 11ms, total 11ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19159K/19368K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19480K/19692K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19974K/20192K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 20616K/20840K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 21431K/21664K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 22714K/22960K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 182K, 2% free 24004K/24432K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 8478K, 33% free 17593K/26228K, paused 14ms, total 14ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 18K, 32% free 17895K/26228K, paused 12ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 18K, 31% free 18198K/26228K, paused 11ms, total 11ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 30% free 18519K/26228K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 29% free 18840K/26228K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 26% free 19482K/26228K, paused 2ms+1ms, total 14ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 10ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 23% free 20297K/26228K, paused 2ms+1ms, total 15ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 11ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 19% free 21260K/26228K, paused 10ms, total 10ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22543K/26228K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 182K, 9% free 23979K/26228K, paused 21ms, total 22ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 8485K, 33% free 17598K/26132K, paused 13ms, total 14ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 25K, 32% free 17894K/26132K, paused 12ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 12K, 31% free 18204K/26132K, paused 12ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 30% free 18524K/26132K, paused 12ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 28% free 18845K/26132K, paused 8ms, total 9ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 26% free 19487K/26132K, paused 1ms+0ms, total 9ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 7ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 23% free 20129K/26132K, paused 9ms, total 9ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 20% free 21091K/26132K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22375K/26132K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 9K, 9% free 24011K/26132K, paused 14ms, total 14ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 2147K, 10% free 23855K/26456K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed 8776K, 35% free 17337K/26304K, paused 3ms+2ms, total 20ms
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_UP, id[0]=0, x[0]=564.0, y[0]=-50.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=0, eventTime=28190972, downTime=28190972, deviceId=4, source=0x1002 }
D/dalvikvm(24476): GC_CONCURRENT freed 186K, 31% free 17626K/25476K, paused 2ms+1ms, total 12ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 4ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 63K, 30% free 17884K/25476K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 3K, 29% free 18201K/25476K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 27% free 18696K/25476K, paused 2ms+1ms, total 12ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 9ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 25% free 19190K/25476K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 23% free 19831K/25476K, paused 9ms, total 9ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 19% free 20794K/25476K, paused 2ms+0ms, total 12ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 14% free 22078K/25476K, paused 1ms+2ms, total 14ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 7% free 23855K/25476K, paused 10ms, total 10ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 6% free 24176K/25476K, paused 2ms+1ms, total 14ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 6440K, 26% free 19562K/26216K, paused 9ms, total 10ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 93K, 23% free 20207K/26216K, paused 10ms, total 10ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 11K, 21% free 20935K/26216K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 18% free 21673K/26216K, paused 9ms, total 9ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22499K/26216K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 10% free 23695K/26216K, paused 9ms, total 9ms -
Why is my iphone 5 having network and battery problems after the ios 6.1.2?
why is my iphone 5 having network and battery problems after the ios 6.1.2?
I also forgot to mention that when it did have power, it wouldn't let me shut it off to try and conserve the battery life. Right when it powered down it would power right back up.
-
Hi Guys,
After installation of Power Manager 1.43, the following errors were immediate shown at event viewer: COM+ Event System failed to fire the StartShell and Logon method on subscription {F6FE5592-FCBC-44AD-A836-D37F5085ED5B}-{00000000-0000-0000-0000-000000000000}-{00000000-0000-0000-0000-000000000000}. The subscriber returned HRESULT 80004001.
Please advice if this is a known issue? Thanks!Hello,
this is a known problem. See this thread
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español -
Problems after installation with disp+work.exe
Hey guys,
i tried to find a solution, but didn't found one....after installation i had to find sapmmc. There was a error message after installation; after some adjustments in the service-file of windows now the message-server runs; but the disp+work still not....find the log attached:
Regards
Christian
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 5276
Fri Feb 01 15:35:19 2008
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 5276) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Feb 01 15:35:24 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >christiank_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06330040, size: 4205552)
DpShMCreate: allocated sys_adm at 06330040
DpShMCreate: allocated wp_adm at 06331A28
DpShMCreate: allocated tm_adm_list at 063332E0
DpShMCreate: allocated tm_adm at 06333310
DpShMCreate: allocated wp_ca_adm at 066A35A0
DpShMCreate: allocated appc_ca_adm at 066A3A50
DpShMCreate: allocated comm_adm at 066A3F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06724DB0
DpShMCreate: allocated gw_adm at 06724DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06724E20
DpShMCreate: allocated wall_adm at 06724E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
Fri Feb 01 15:35:29 2008
ERROR => MsINiRead: NiBufReceive failed (NIETIMEOUT) [msxxi.c 2515]
ERROR => MsIAttachEx:MsINiRead (rc=NIETIMEOUT) [msxxi.c 762]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c 1708]
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
ERROR => DpRGetLogin: Data for alien client [dpxxdisp.c 11251]
Connect request from wrong client at address 10.10.0.10(christiank)
ERROR => DpRGetLogin: Data for alien client [dpxxdisp.c 11251]
Connect request from wrong client at address 127.0.0.1(christiank.hidomain)
Fri Feb 01 15:36:14 2008
ERROR => MsINiRead: NiBufReceive failed (NIETIMEOUT) [msxxi.c 2515]
ERROR => MsIAttachEx:MsINiRead (rc=NIETIMEOUT) [msxxi.c 762]
ERROR => W0 (pid 5280) died [dpxxdisp.c 14318]
ERROR => W1 (pid 4088) died [dpxxdisp.c 14318]
ERROR => W2 (pid 5020) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9f --> 0x9e
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W3 (pid 4644) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9e --> 0x9c
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W4 (pid 3080) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9c --> 0x98
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W5 (pid 5752) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x98 --> 0x90
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W6 (pid 6040) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x90 --> 0x80
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 01 15:36:24 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Feb 01 14:36:24 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 5280 Ended no 1 0 0
1 DIA 4088 Ended no 1 0 0
2 DIA 5020 Ended no 1 0 0
3 UPD 4644 Ended no 1 0 0
4 ENQ 3080 Ended no 1 0 0
5 BTC 5752 Ended no 1 0 0
6 SPO 6040 Ended no 1 0 0
Dispatcher Queue Statistics Fri Feb 01 14:36:24 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
4
2000
5
5
--------++++--
+
DIA
3
3
2000
3
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 7
wake_evt_udp_now 0
wake events total 7, udp 2 ( 28%), shm 5 ( 71%)
since last update total 7, udp 2 ( 28%), shm 5 ( 71%)
Dump of tm_adm structure: Fri Feb 01 14:36:24 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Feb 01 14:36:24 2008
=============================
Slots: 20, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 01 15:36:29 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >christiank_NSP_00 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (3876) (SOFT_KILL)
Stop icman
killing process (3444) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:3876 HANDLE:1556)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 01 15:36:30 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3876 HANDLE:1556)
wait for end of icman
[DpProcDied] Process died (PID:3444 HANDLE:1572)
not attached to the message server
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5276) [dpxxdisp.c 10333]
Good Bye .....
Edited by: C. Koch on Feb 1, 2008 3:35 PMDuring BW system copy, NW04S.
We do have simalr error message loosing our time to bring up the system:
[disp_dev]
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri May 2 19:35:54 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0088.qqq.nxst) took 6 se
conds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust t
he DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
Fri May 2 19:35:55 2008
WLM Tag 'BD2/DSP' successfully set for this process
rdisp/http_min_wait_dia_wp : 1 -> 1
Fri May 2 19:36:00 2008
ERROR => MsINiRead: NiBufReceive failed (NIETIMEOUT) [msxxi.c 2515]
ERROR => MsIAttachEx:MsINiRead (rc=NIETIMEOUT) [msxxi.c 762]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c 1716]
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
[sapinst_dev.log]
TRACE 2008-05-02 23:20:44.132 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing service SAP NetWeaver 7.0 Support Release 3 > Softwar
e Life-Cycle Options > System Copy > Oracle > Target System Installation > Central System > Based on AS ABAP and AS Java
> Central System( Last error reported by the step :<html> <head> </head> <body> An exception occurred while connecting to
the message server instance BD2/DVEBMGS00 on host nvdbw40, port 3900.<br>DIAGNOSIS: The original exception was: wapsmod.
ms.MsAttachFailed:
Connect to message server (nvdbw40/3900) failed: NIETIMEOUT..<br>SOLUTION: Make sure that the message server is started.
</body></html>). You may now </p> <ul> <li> choose <i>Retry</i> to repeat the current step. </li> <li> choose <i>View Log
</i> to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> <p> Log fi
les are written to /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS/. </p> </body></html>
TRACE 2008-05-02 23:20:44.132 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
INFO 2008-05-02 23:54:49.854 [sixxcstepexecute.cpp:1004]
An error occured and the user decide to stop.\n Current step "|NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_Syst
em|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Start|ind|ind|ind|ind|1|0|start".
[dev_w0]
Fri May 2 19:35:56 2008
Bind service sapgw00 (socket) to port 3300
GwPrintMyHostAddr: my host addresses are :
1 : [165.140.111.55] nvdbw40 (HOSTNAME)
2 : [127.0.0.1] loopback (LOCALHOST)
3 : [165.140.114.55] bnvdbw40 (NILIST)
Full qualified hostname = nvdbw40
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
Fri May 2 19:41:30 2008
M *** ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c 17386]
M
- Need a help
Thank you -
Firefox and Adobe problems after Flash update last night
OK, this is a non-Apple question, but I haven't found any solution yet.
Everyone knows that to run the "Adobe Acrobat NPAPI Plug-in, Version 10.1.3" in Firefox, you had to open in 32-bit mode. I did and that plug-in, plus the "Adobe Acrobat Create PDF 1.2" extension worked just fine running Firefox 12. Tonight I got notification that I needed to update Adobe Flash Player. I did (quitting and restarting Firefox after the installation).
THEN up popped a warning - Firefox suggesting that I disable the NPAPI plug-in and finding out here that Firefox was disabling the plug-in. So I disabled it, restarted, etc. Then I found that the Create PDF plug-in would crash if I tried to save a web page as PDF within Firefox.
Is there any way to go BACK to the older Flash plug-in? That seems to be at the root of my problem. I can use PDF Browser plug-in in Firefox to display PDF files but what I really need is the Create PDF extension back (it's strangely absent from Safari - at least I've not been able to find it).
Any help out there?
Thanks,
Clintonclintonfrombirmingham wrote:
petermac87 wrote:
clintonfrombirmingham wrote:
but what I really need is the Create PDF extension back (it's strangely absent from Safari - at least I've not been able to find it).
Create PDF or save as PDF?
Pete
Pete,
I can always use the PDF creator "Save as Adobe PDF" that is available from the Print menu and added by Acrobat Pro X, but it does not always save the hyperlinks correctly, etc., where the Adobe Create PDF does a fantastic job... I'd just like to have it back. It does not show up in the Safari extensions/add-ons for some reason.
Thanks for getting back so quickly!
Clinton
Then you may well have to go to the Mozilla Forums on this one. As I say, I steer clear of Firefox because of all it's bulky extentions.
Good Luck
Pete -
ITunes encountered a problem after installation
Hello,
Until 2 days ago, iTunes was working fine. Now when clicking on the iTunes icons, a screen comes up saying "iTunes has encounted a problem and needs to close." And gives the option to send an error report to Microsoft.
We have tried un-installing iTunes & re-installing a few times. Un-installed QuickTime & Reinstalled it, etc. Is there anything else we can try?
Thank you!If you are unable to uninstall Quicktime from within add remove programs, and receive an error that state something to the effect...
Quicktime cannot be uninstalled because C:\<some directory path>\uninstall.log cannot be found
Just download and install the StandAlone Installer or locate the C:\Windows\system32\quicktime folder and delete it....only do this as a very last resort, but after a reboot, you should be able to use add remove programs -
Problems after installation 16.0.3 update for Windows
I propose here to report problems appeared after installation 16.0.3 Illustrator update for Windows.
As for me:
Don’t display Stray and Center Points in Outline mode;
Eyedropper+Shift works incorrectly;
Graphic Style Libraries -> Additive make disappeared Fill.Hi K,
Thank you for you reply and sorry if the information was a bit too truncated. well here goes.
I am using a MacBook Pro (3.1) 17 inch, 2.4GHz processor, 2 GB ram. I edit video using Final Cut Studio 2. i am having a problem with Final Cut Pro 6 after downloading the latest update (6.0.3). Before I downloaded the update I used to be able to export my movies on the Quicktime option of FCP (not compressor or Quicktime conversion) giving me the option to view the the movie while in an FCP Project. The viewer used to scale the exported video to 16.9 (720 by 576 anamorphic), it no longer does this, instead playing it in 4.3. I have tried exporting both from the time line and the canvas but the viewer will only preview in 4.3. As I want to see it in 16.9 because that is what the movie was made in, captured and edited in. The original settings have not changed but there seems to be this annoying problem.
I hope that is enough detail
Ivan -
NWDS Startup problem after installation
Hi!
After installation when trying to start NWDS 7.0.06, the following error occurs:
!SESSION Aug 10, 2006 10:12:56.300 -
java.version=1.5.0_08
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=de_AT
Command-line arguments: -os win32 -ws win32 -arch x86 -feature com.sap.java.ide C:\WINDOWS\system32\javaw.exe
-Xmx512m
-Xms128m
-XX:PermSize=32m
-XX:MaxPermSize=128m
-DallUserDir='C:\Dokumente und Einstellungen\All Users\Anwendungsdaten'
-cp C:\Programme\SAP\IDE\IDE70\eclipse\SapStartup.jar com.sap.ide.eclipse.startup.Main
-os win32
-ws win32
-arch x86
-feature com.sap.java.ide
-showsplash C:\Programme\SAP\IDE\IDE70\eclipse\SapIde.exe -showsplash 600 -data C:\Dokumente und Einstellungen\aur\Documents\SAP\workspace -install file:C:/Programme/SAP/IDE/IDE70/eclipse/
!ENTRY Startup 1 0 Aug 10, 2006 10:12:56.300
!MESSAGE Sap NetWeaver Developer Studio - Unknown Sap Internal Installation
!SESSION -
!ENTRY org.eclipse.core.launcher 4 0 Aug 10, 2006 10:12:56.988
!MESSAGE Exception launching the Eclipse Platform:
!STACK
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Caused by: java.lang.reflect.InvocationTargetException
at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:861)
at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
... 7 more
Caused by: java.lang.UnsatisfiedLinkError: Native Library C:\Programme\SAP\IDE\IDE70\eclipse\plugins\org.eclipse.swt.win32_2.1.2\os\win32\x86\swt-win32-2135.dll already loaded in another classloader
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at org.eclipse.swt.internal.Library.loadLibrary(Library.java:108)
at org.eclipse.swt.internal.win32.OS.<clinit>(OS.java:46)
at org.eclipse.swt.widgets.Display.internal_new_GC(Display.java:1291)
at org.eclipse.swt.graphics.Device.init(Device.java:547)
at org.eclipse.swt.widgets.Display.init(Display.java:1316)
at org.eclipse.swt.graphics.Device.<init>(Device.java:96)
at org.eclipse.swt.widgets.Display.<init>(Display.java:291)
at org.eclipse.swt.widgets.Display.<init>(Display.java:287)
at org.eclipse.ui.internal.Workbench.run(Workbench.java:1361)
at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
... 8 more
Any ideas to solve this problem?
Thanks and regards,
FranzMaybe the workspace is corrupted..Try starting with a new workspace. In a short cut define the new workspace
C:\Programme\SAP\IDE\IDE70\eclipse\SapIde.exe -showsplash 600 -data C:\temp
Otherwise try installing again.
Regards,
Arun -
Boot Camp 2.1 problems after installation, how to fix?
Downloaded and installed Boot Camp 2.1 to my WinXP SP2 partition. After installation and rebooting, problems began to occur:
1. iSight no longer working, hardware wizard keeps popping up. Reinstalling driver for iSight, no help. Finally had to disable.
2. Keyboard message popping up during bootup of XP stating that it isn't installed properly. However, keyboards - both external and internal seem to be working OK.
3. Blue Tooth error message popping up when bringing MacBook out of Standby (from WinXP). Message states Blue Tooth not installed properly. After MacBook wakes up, Blue Tooth seems to be OK.
Tried reinstalling Boot Camp 2.1 again but no joy. Same errors.
Finally had to remove 2.1 and revert back to 2.0. After reverting back to 2.0 I had to run system restore from XP to get everything back to normal. Everything OK now running Boot Camp 2.0.
How do I resolve the above errors and what does 2.1 suppose to fix - if anything?
Regards.Thank goodness you got back to normal. I have the Blue Screen of Death and spontaneous shutdown after installing 2.1. I uninstalled 2.1 and tried to reinstall 2.0 using the Leopard DVD and cannot get the installer to work. I get an error code 2753 and the installer shuts down.
Now when I try to open the 2.1 installer nothing happens. I think a reinstall of Windows XP is in my future. Thanks Apple.
Maybe you are looking for
-
I have forgetten my security q answers and itunes won't let me download anything! HELP!
Hi, this is the first time I've tried to download something off iTunes, my account defiantly has money on it and all is okay. Then, I go to type my password and the security questions pop up, I've forgotten both my answers and am now stuck! Does anyo
-
Compatibility between Oracle 6 and with new versions of Internet Explorer
Hi, my client has a big Forms application. Currently, the application's users need to have installed older versions of Netscape in order to be able to load and see the Form´s applet. We developed a J2EE application for the client and this client has
-
Custom Icon goes with usb peripheral from Mac to different Mac
Okay, so I can change the icon on my usb flash drive to show a custom icon each time I plug it into the same Mac day after day, but what if I want to change to a different computer, say my Mac at home, the icon comes up as the default icon. Can I loc
-
Managed datasources, Global transactions and XA
I have a question regarding the use of managed datasources and global transactions with oc4j 10.1.3. From the documentation at: http://download-west.oracle.com/docs/cd/B25221_04/web.1013/b14428/servdats.htm#CHDGJECC I conclude that managed datasource
-
Delivery date and approval procedure
Hello, My customer has the next problem. He generate a purchase order after approval procedure was ended. sometimes he wants to update the delivery date field in the row of the purchase order, but he can't do so because approval procedure restrict an