Locale and LC_ALL [SOLVED]

Having a problem with locales regarding the LC_CTYPE, LC_MESSAGES and LC_ALL variables:
core-08 etc # locale
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
LANG=en_UK.utf8
LC_CTYPE="en_UK.utf8"
LC_NUMERIC="en_UK.utf8"
LC_TIME="en_UK.utf8"
LC_COLLATE=C
LC_MONETARY="en_UK.utf8"
LC_MESSAGES="en_UK.utf8"
LC_PAPER="en_UK.utf8"
LC_NAME="en_UK.utf8"
LC_ADDRESS="en_UK.utf8"
LC_TELEPHONE="en_UK.utf8"
LC_MEASUREMENT="en_UK.utf8"
LC_IDENTIFICATION="en_UK.utf8"
LC_ALL=
I tried following this suggestion: http://bbs.archlinux.org/viewtopic.php?id=19958 but still have the same issues.
My /etc/locale.gen file contains:
core-08 ~ # grep -v ^# /etc/locale.gen
en_GB.UTF-8 UTF-8
en_GB ISO-8859-1
en_US.UTF-8 UTF-8
en_US ISO-8859-1
...and glibc version is current/glibc 2.5-4
Am I missing something here?
TIA.
Iain.
Last edited by expat_iain (2007-03-05 12:20:59)

you have default locale en_UK
but this locale doesn't present in your locale.gen
Last edited by zeus (2007-02-20 10:23:10)

Similar Messages

I tried to update iTunes yesterday. The update failed. Now when I try to open iTunes it says that the version isn't localized and needs to be run in English. It has never been in another language.

I attempted to update iTunes yesterday. The update failed. iTunes now won't open and displays an error message that the program isn't localized and needs to be run in the English version. I'm in the US and the computer and program has never been used in another language. I tried reinstalling the full download for the new version and that failed as well. I logged out; shut down; restarted; retried the update; etc. Still no luck and the same message. Thoughts?

Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

Local and ISP DNS

Hi all,
i have a local DNS server for some local stuff like website,ldap and so on and the normal ISP DNS.
On Client i have entered the local DNS IP (xxx.xxx.xxx.xxx) and the ISP DNS IP (yyy.yyy.yyy.yyy).
So here is my problem when the Local DNS IP is on top of the table i can surf only the local websites but not the public. vice versa is it for when i have the ISP DNS IP on top. what can i do to surf all website, the local and the public.

Your DNS is asking a "lame" server for DNS; you're not getting an authoritative response to the query.
The target DNS server for the query isn't configured correctly; the local DNS server has found a target DNS server for the domain as being authoritative for the zone, but the target DNS server is not configured as being authoritative for the zone.
i configured my router for forwarding the port 53 to my local dns, but it didn't solved the problem!
That's not what I'd choose here.
Your clients are aimed at your DNS server. Your DNS server is aimed at your ISP servers. Your firewall is set to pass DNS out, but (generally) to block inbound DNS requests. Your DHCP is set to serve your DNS server address. If you've been tossing configuration changes and such here within your clients and your DNS servers, then you may well have some stale stuff in the DNS caches, too.

Using one locale and another language

I recently installed Arch on my laptop, and I'd prefer to use English for messages and menus and everything like that, while having sorting, decimals etc (everything else controlled by the locale, really) according to the Swedish locale. I tried setting LOCALE=sv_SE.utf8 and LANG=en_US.utf8 in /etc/rc.conf, but that still gives LANG="sv_SE.utf8" in any given environment. Is there a simple way to set this up? I come from gentoo which has /etc/env.d/02locale where you can set each locale varibale individually, which is handy for someone like me.

I have my LOCALE=en_US.utf8 in /etc/rc.conf and the following in /etc/profile:
export LANG="en_US.utf8"
export LC_COLLATE="C"
export LC_TIME="sv_SE.utf8"
export LC_MONETARY="sv_SE.utf8"
export LC_MEASUREMENT="sv_SE.utf8"
export LC_CTYPE="sv_SE.utf8"
Of course I also have the following in my .bashrc:
if [ -f /etc/profile ]; then
. /etc/profile
fi
Which results in the following:
$ locale
LANG=en_US.utf8
LC_CTYPE=sv_SE.utf8
LC_NUMERIC="en_US.utf8"
LC_TIME=sv_SE.utf8
LC_COLLATE=C
LC_MONETARY=sv_SE.utf8
LC_MESSAGES="en_US.utf8"
LC_PAPER="en_US.utf8"
LC_NAME="en_US.utf8"
LC_ADDRESS="en_US.utf8"
LC_TELEPHONE="en_US.utf8"
LC_MEASUREMENT=sv_SE.utf8
LC_IDENTIFICATION="en_US.utf8"
LC_ALL=
Perhaps you could do with setting just LANG=en_US.utf8 and LC_ALL=sv_SE.utf8?
Last edited by [vEX] (2007-10-13 21:14:50)

I set my cRIO from 'DHCP' to 'link local' and lost contact with it.

I set my cRIO from 'DHCP' to 'link local' and lost contact with it.
I changed the setting at the placed labeled "2" to link local only, then I think I hit save at "3". Then poof, I had no network contact with my cRIO.
I tried;
Hitting the reset button
Opening a closing MAX
Going to safe mode
Throwing the Reset IP switch
Power cycling the cRIO
Running cat 5 cable directly from the Host to my target
None of it worked, and I have no contact with my cRIO.
This is what MAX looks like now. How can I fix this?
Solved!
Go to Solution.

Make sure to disable the firewall on your computer.
Otherwise you can check through the steps in this documentation:
http://digital.ni.com/public.nsf/allkb/ABE4BC247E8AC9BC8625734E005CAB42
Note specifically that one option is to read the console out from the target VIA the serial port will a null modem cable during boot and it will indicate what IP the system is using.
Craig H. | CLA | Systems Engineer | National Instruments

Local songs won't stream via Spotify after playing locally and being removed.

I have an external hard drive I use to store all the songs I own. For everything else, there's Spotify. Sometimes I unplug my external hard drive and play music that I own via Spotify instead. Spotify used to be able to clearly distinguish between these and integrate them seamlessly. But with the new update (0.8.8.450gd...), these are very confused. The moment I plugged in my hard drive and played a song on my playlist, it switched the file source from Spotify to local, and it will not change back. Even after I unplug my hard drive and restart Spotify, problem not solved. In addition, there is no way to know if I'm dragging a local file or a Spotify song to my playlists, which leaves all my playlists absolutely unreliable until this is fixed. It could stop at any time if I don't have my external drive plugged in, which is not ideal. Any help would be appreciated.

Same issue. This has always been a problem for me with Spotify, for the last few years.
I have a lot of CD-ripped lossless files in my iTunes, so it's great Spotify lets me play those higher quality versions. However, if my external HD with my iTunes library files on it is not connected (which is any time my laptop isn't at my desk), there is no way to play that music without permanently unlinking the file.
It's a crummy situation. Spotify will play music I never bought outright via CD just fine. But if Spotify ever gets a whiff of a file being part of the iTunes library, and that file is not able to be loaded at that moment, then it will refuse to let you stream the track. It makes no sense.
The solution to this is that Spotify should play local audio files for tracks when they are accessible, and stream them when they are not. That was part of the whole point of subscribing to a cloud-based music streaming service in the first place for me.

System ignores locale/language setting [solved?]

Hi
I updated my system a few days ago and since then all gtk2/3 applications ignores language settings. I have set correct locale in /etc/locale.conf, /etc/locale.gen (I haven't changed it since installation), locale command also returns correct values. Even if I force locale from command line (by changing LANG or LC_ALL), apps are still in english.
When the problem appears I had Cinnamon desktop, but i tried also Gnome and Kde - same effect (in Kde problem affects gtk apps), I also tried to change login manager (lxdm, lightdm, gdm, kdm), also without positive result. Clearing user config also doesn't help. Any ideas?
Thanks in advance.
UPDATE: It seems whole system ignores locale (in kde I just can manually select custom locale and then it works in kde/qt apps), including console apps (I just didn't notice that before). Strange thing is that Thunderbird has also correct language settings although it is not kde/qt app (in contrast to e.g firefox, which even ignores general.useragent.locale variable).
Last edited by Noctivivans (2013-09-16 23:24:36)

locale-gen
Generating locales...
pl_PL.UTF-8... done
Generation complete.
locale
LANG=pl_PL.UTF8
LC_CTYPE="pl_PL.UTF8"
LC_NUMERIC="pl_PL.UTF8"
LC_TIME="pl_PL.UTF8"
LC_COLLATE="pl_PL.UTF8"
LC_MONETARY="pl_PL.UTF8"
LC_MESSAGES="pl_PL.UTF8"
LC_PAPER="pl_PL.UTF8"
LC_NAME="pl_PL.UTF8"
LC_ADDRESS="pl_PL.UTF8"
LC_TELEPHONE="pl_PL.UTF8"
LC_MEASUREMENT="pl_PL.UTF8"
LC_IDENTIFICATION="pl_PL.UTF8"
LC_ALL=
locale -a
C
pl_PL.utf8
POSIX
I tried e.g. invoke
LANG=pl_PL.UTF8 galculator
from command line.
Last edited by Noctivivans (2013-09-15 23:00:47)

When i try to send email from my ipad i get the message The recipient "£)()&&£)" was rejected by the server. This has only just started to happen and I don't know why. Please help. I have tried lots of things now and cannot solve it.

When i try to send email from my ipad i get the message The recipient "£)()&&£)" was rejected by the server. This has only just started to happen and I don't know why. Please can someone help. I have tried lots of things now and cannot solve it.

"Your email account" means to tap on the name of your email account. Whatever it is listed as in the settings.
In my mail settings, one of my email accounts is a Comcast account. I tap on the Comcast name and it brings up this window.
Then I tap on the arrow under the Outgoing mail server smtp setting to get to the next window.
In the resulting window, I then tap on the arrow next to the smtp server under the Primary Server setting.
That brings up this window in which I check to make sure that my user name and password have been entered correctly. If those items are missing, enter them in the appropriate fields and then tap done.

Hetrogenous join: ms access local and oracle on server

Hello
I want to know if it is possible to join tables from a local client ms access db and an oracle db on a server. I have used the link feature in ms access and the hsodbc feature of oracle, but the ms access db is local and the oracle is not. Is there anyway that I can control the local access db from a link from the oracle db on the remote server?
Thanx

There is no such facility as of now to acces Oracle table from DB2 database or anything.
You can spool the data into flat file for MS access table and import that data into
Oracle table.

How to use the same services-config for the local and remote servers.

My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service id="amfphp-flashremoting-service"
            class="flex.messaging.services.RemotingService"
            messageTypes="flex.messaging.messages.RemotingMessage">
            <destination id="amfphp">
                <channels>
                    <channel ref="my-amfphp"/>
                </channels>
                <properties>
                    <source>*</source>
                </properties>
            </destination>
        </service>
    </services>
    <channels>
    <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    </channel-definition>
    </channels>
</services-config>
I think the problem is the line
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.

paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

Terms of Payment for Local and Import Purchase Order

Hello Experts,
I am SAP FICO Consultant, I am given a task of maintaining payment terms for local and import purchase order, I would highly appreciate your help in this regard. I know I can maintain payment terms via OBB8 but I am not sure that how to cover the following scenarios.
1. 100% Advance
2. 50% Advance, Balance in 07 Days (usually balance immediate with delivery is accepted but it is paid in 07 days for the record)
3. 25% Advance, Balance in 07 Days
4. 10% Advance, Balance in 07 Days
5. 30 Days Credit
6. 15 Days Credit
7. 07 Days Credit
IMPORTS
1. 100% Irrevocable LC in advance
2. 100% TT in Advance
3. 50% TT in advance & 50% before shipment.
Looking forward to hear from you.
Regards
Muhammad Yousuf Ali

Hi
<b>All the Local as well as the R/3 data gets stored in the SRM tables ->
BBP_PAYTERM (Terms of Payment, Backend-Dependent)
BBP_PAYTERM_TEXT ( Texts for Terms of Payment, Backend-Dependent)
BBP_TQ02B ( QM System)
BBP_TQ02U (Description QM system)
Also refer to Transaction SLG1 for the log created in this case.</b>
Hope this will help.
Please reward suitable points.
Regards
- Atul

[Forum FAQ] How to install and configure Windows Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely

As we all know,
the Windows Server Essentials Experience role is available in Windows Server 2012 R2 Standard and Windows Server 2012 R2 Datacenter. We can add the Windows Server
Essentials Experience role in Server Manager or via Windows PowerShell.
In this article, we introduce the steps to install and configure Windows
Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely. For better analyze, we divide this article into two parts.
Before installing the Windows Server Essentials Experience Role, please use
Get-WindowsFeature
PowerShell cmdlet to ensure the Windows Server Essentials Experience (ServerEssentialsRole) is available. (Figure 1)
Figure 1.
Part 1: Install Windows Server Essentials Experience role locally
Add Windows Server Essentials Experience role
Run Windows PowerShell as administrator, then type
Add-WindowsFeature ServerEssentialsRole cmdlet to install Windows Server Essentials Experience role. (Figure 2)
Figure 2.
Note: It is necessary to configure Windows Server Essentials Experience (Post-deployment Configuration). Otherwise, you will encounter following issue when opening Dashboard.
(Figure 3)
Figure 3.
2. Configure Windows Server Essentials Experience role
(1) In an existing domain environment
Firstly, please join the Windows Server 2012 R2 Standard computer to the existing domain through the path:
Control Panel\System\Change Settings\”Change…”\Member of. (Figure 4)
Figure 4.
After that, please install Windows Server Essentials Experience role as original description. After installation completed, please use the following command to configure Windows
Server Essentials:
Start-WssConfigurationService –Credential <Your Credential>
Note: The type of
Your Credential should be as: Domain-Name\Domain-User-Account.
You must be a member of the Enterprise Admin group and Domain Admin group in Active Directory when using the command above to configure Windows Server Essentials. (Figure 5)
Figure 5.
Next, you can type the password for the domain account. (Figure 6)
Figure 6.
After setting the credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 7)
Figure 7.
By the way, you can use
Get-WssConfigurationStatus
PowerShell cmdlet to
get the status of the configuration of Windows Server Essentials. Specify the
ShowProgress parameter to view a progress indicator. (Figure 8)
Figure 8.
(2) In a non-domain environment
Open PowerShell (Run as Administrator) on the Windows Server 2012 R2 Standard and type following PowerShell cmdlets: (Figure 9)
Start-WssConfigurationService -CompanyName "xxx" -DNSName "xxx" -NetBiosName "xxx" -ComputerName "xxx” –NewAdminCredential $cred
Figure 9.
After you type the commands above and click Enter, you can create a new administrator credential. (Figure 10)
After creating the new administrator credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 11)
After a reboot, all the configurations will be completed and you can open the Windows Server Essentials Dashboard without any errors. (Figure 12)
Figure 12.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Part 2: Install and configure Windows Server Essentials Experience role remotely
In an existing domain environment
In an existing domain environment, please use following command to provide credential and then add Server Essentials Role: (Figure 13)
Add-WindowsFeature -Name ServerEssentialsRole
-ComputerName xxx -Credential DomainName\DomainAccount
Figure 13.
After you enter the credential, it will start install Windows Server Essentials role on your computer. (Figure 14)
Figure 14.
After the installation completes, it will return the result as below:
Figure 15.
Next, please use the
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with a remote computer. You can use the commands below:
Enter-PSSession –ComputerName
xxx –Credential DomainName\DomainAccount (Figure 16)
Figure 16.
Then, please configure Server Essentials Role via
Add-WssConfigurationService cmdlet and it also needs to provide correct credential. (Figure 17)
Figure 17.
After your credential is accepted, it will update and prepare your server. (Figure 18)
Figure 18.
After that, please type “Y” to continue to configure Windows Server Essentials. (Figure 19)
Figure 19.
2. In a non-domain environment
In my test environment, I set up two computers running Windows Server 2012 R2 Standard and use Server1 as a target computer. The IP addresses for the two computers are as
below:
Sevrer1: 192.168.1.54
Server2: 192.168.1.53
Run
Enable-PSRemoting –Force on Server1. (Figure 20)
Figure 20.
Since there is no existing domain, it is necessary to add the target computer (Server1) to a TrustedHosts list (maintained by WinRM) on Server 2. We can use following command
to
add the TrustedHosts entry:
Set-Item WSMan:\localhost\Client\TrustedHosts IP-Address
(Figure 21)
Figure 21.
Next, we can use
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with the remote computer. (Figure 22)
Figure 22.
After that, you can install Windows Server Essentials Experience Role remotely via Add-WindowsFeature ServerEssentialsRole cmdlet. (Figure 23)
Figure 23.
From figure 24, we can see that the installation is completed.
Figure 24.
Then you can use
Start-WssConfigurationService cmdlet to configure Essentials Role and follow the steps in the first part (configure Windows Server Essentials Experience in a non-domain environment) as the steps would be the same.
The figure below shows the status of Windows Server Essentials.
Figure
25.
Finally, we have successfully configured Windows Server Essentials on Server1. (Figure 26)
Figure 26.
More information:
[Forum
FAQ] Introduce Windows Powershell Remoting
Windows Server Essentials Setup Cmdlets
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Setting Locale and Hostname on New Installation Fails

Hello,
Tried doing an Arch install on my Acer Aspire One D255 today, but when I try to set the hostname and locale while chroot'ed into /mnt, I get:
Failed to get D-Bus connection: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory
This occurs when running hostnamectl and localectl as per the Beginners' Guide. I had to set the locale manually in /etc/locale.conf, but I don't know what to do about the hostname, and something seems to indicate there's a more serious issue.
Any idea?

ifaigios wrote:I edited Beginner's Guide yesterday replacing the old method of setting the default locale and the hostname, with localectl and hostnamectl. However, as you discovered, it seems that these commands require DBus to be running to work, so they are of no use in the chroot. Thankfully, thestinger reverted my edits as soon as you found out the problem, so the page contains the correct information again. I am sorry for the inconvenience and for any trouble I caused.
No problem, thanks for helping! However, I think you missed a few 'systemctl' commands. There's three here and one here. I don't know how to fix them, so for now I'll just configure them on reboot.

Urgent : OBIA - Handling multiple Global, Local and Document Currencies

All,
I need input on how to configure multiple currency codes in DAC for OBIA 7.9.6.x
My client's business goes around the the world and with multiple local currencies.They also need reporting currency to be multiple like in Euro, USD etc.
I went through a couple of threads in this forum,like -
Re: Configuring Global Currencies in BI Apps 7.9.6 for EBS 11.5.10 Source
Re: How we are using Global, Local and Document Currencies in DAC.
But I have some confusion regarding the configuration of DAC's 3 Global currency codes.
In order to fulfill my requirement - should I add additional codes in DAC?
Basically How am I supposed to handle multiple Local,Document and Global currencies? And then possible changes in rpd/reports required also?
Regards,
Krish

Currencies are discussed in the Setup and Configuration Guide here:
7.1.1.2 How to Configure Global Currencies
To configure the global currencies you want to report in your warehouse:
In the DAC Client, display the Design view.
For more information about logging into the DAC, see Section A.1, "How to Log Into the DAC Client".
Select a container from the drop down list to the right of the Execute button.
Display the 'Source System Parameters' tab.
Locate the following parameters and set the currency code values for them in the 'Value' box:
$$GLOBAL1_CURR_CODE (for the document currency).
$$GLOBAL2_CURR_CODE (for the local currency).
$$GLOBAL3_CURR_CODE (for the global currency).
Make sure that you spell the currencies as they are spelled in your source OLTP system.
Save your changes.
As far as for PLP items, those are Post Load Processing elements that perform cleanup tasks after the Base Warehouse tables have been loaded. They should never be modified and frankly run without any issues provided the rest of the plan executes properly. Do you have a specific quesiton about a PLP?

Locale and language

I am having trouble getting locales and languages to work as I would expect them to. I have created a tiny application (I'm a faces newbie still) and a bunch of localization files:
message.properties
messages_en.properties
message_fr.properties
messages_en_GB.properties
I add all of these languages to the faces-config.xml file setting the en_GB to be the default. When I set my browser to en_GB it picks up the file as I would expect. When I set it to fr I get the french version but I have to restart the server (Tomcat 5.0.18 running under Netbeans) to make it switch over. I would have thought that since the browser is now sending up a different locale faces would just switch automatically to using a different bundle without a restart but it seems to remember some how. This may be due to the incremental redeploy into tomcat but I'm not convinced as the behaviour is unpredictable.
What I am also confused about is the way defaults are dealt with. In the Core JavaServer Faces book it says that the base properties file will be used if a matching language resource can't be found. My observation is that it uses the default specified in the faces-config file. Is this right?
I'm also curious to know what happens when a non-exact match is sent up. For instance which resouce bundle, of the four listed, would be chosen if a browser specified en_US?
Thanks

I had this problem this week. I guess this is a problem with Netbeans and Tomcat. When Netbeans detects your system language (LANG environment variable in Linux, for instance), its bundled Tomcat "sticks" with this locale and can't change it. If you try to run it with an external Tomcat, it may work.

Locale and LC_ALL [SOLVED]

Similar Messages

Maybe you are looking for