Locale Error Message After Todays Update [Solved]

I experienced an error message regarding something about cannot locale en-US.UTF8 after an update and reboot today.
I got rid of the error message by uncommenting:
en_US.UTF-8 UTF-8 
en_US ISO-8859-1 
in
/etc/locale.gen
Prior to fix:
$ locale
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
After fix:
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES=C
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
Didn't have time to check into this issue in much detail and would appreciate any additional info.

Additional info?
glibc has been upgraded today. You probably haven't merged the pacnew files.

Similar Messages

  • Dolby Advanced Audio V2 Error Message After Lenovo Update

    I received the following error message after completing a Lenovo Update: "The current Dolby audio driver version is 8.2.8000.14 and the software application expects driver version 7.2.7000.7. Please install a valid driver and software application." I have run Lenovo Update again and no updates/downloads were required. What action do I need to take to correct the problem so that Dolby Advanced Audio V2 works correctly? Thank you for your help.

    'morning...
    have a look at: http://forums.lenovo.com/t5/ThinkPad-Edge/E430-Dolby-Advanced-Audio-Issue/td-p/826333
    even though it was originally described as an E430 problem, there are reports in the thread that uninstalling Conexant Audio from Control Panel and rebooting fixed the Dolby Audio issue.
    hth.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • Error message after latest update and backup, can't operate program at all, no customer service.  LR 5.5, Windows 8.1

    I updated to LR 5.5 and later restarted my computer.  I didn't use the program for a few days and then when I did, it wanted to backup the catalog.  I agreed and closed the program.  The next time I opened it, it asked me for my region, saying it was required.  When I answered, I got an error message saying it has encountered an error reading the preview cache and needs to quit.  It fails to fix the error and gives the same message over and over.  I can't use the program at all.  Customer service has apparently been discontinued and I'm really at the end of my rope with this whole company.  I don't think I've ever had a mass-release program with so many problems.

    open disk utility, make sure that you're back to only 1 partition should be 'macintosh hd' unless you renamed it
    do not try to use the disk, instead DL the x64 8.1 pro ISO from this link, and once it is finished, then open bca and choose all 3 options (copy iso, copy windows support and install windows)
    http://getintopc.com/softwares/operating-systems/windows-8-1-download/

  • Help - error message after iTunes update

    I have a Windows 7 PC
    I updated iTunes about four days ago and got an error message.
    What should I do to correct this annoying issue?
    AppleSyncNotifier.exe - Entry Point Not Found
    The Procedure entry point xmlTextTeaderName could not be located in the dynamic link library libxml2.dll

    Many thanks.
    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • TS1424 How do I clear the error message after I update my Security Information so I can purchase a song??

    iTunes asked me to update my Security Information so I could purchase a song and after I answered all the questions is said there was an error in saving the changes and bounced me out.  How can I purchase a song???

    Hi saxxy60, I have not encountered this error before, but I have when the internet connection is lost in the middle of the download. You can try to disable any antivirus on the computer [http://answers.microsoft.com/en-us/ie/forum/ie10-windows_8/an-error-occurred-while-downloading-attachment-in/02b00230-ed67-473c-9ad8-370deac2272e?msgId=0d3d89cf-2722-43f3-b21b-2f3214e2f1d1]
    You can try to get more elaborate errors if you try to reproduce the issue with an HTTP traffic capture.
    *An add on [https://addons.mozilla.org/en-us/firefox/addon/live-http-headers/ Live HTTP Headers]
    *[http://www.telerik.com/download/fiddler Fiddler]
    Please let us know if this helped you out!

  • HT1925 I am unable to start my Itunes and keep getting error messages after an update faiked to load correctly.  I have uninstalled and reinstalled it still getting these messages.  Please Help.

    I am not able to load I Tunes.....I attempted to uograde and now am unable to start Itunes....I uninstalled it and reinstalled no luck. HELP?

    Follow the below procedure if you are using a Windows based PC.   I did not develop it, another forum user did, but I did insert 1 additional step in case you use a 3rd party software package to give your apple devices "Airprint" capability for your non Air Print capable printers (Such as Fingerprint).
    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
    Remove all of these items in the following order:
    Remove any 3rd party software which uses Airprint features (such as Fingerprint by Collobos)
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or by right-clicking the downloaded installer and selectingRun as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8

  • Trying to update frpm itunes 10 to itunes11, but get error message after installation

    I am trying to update my itunes to be compatible with my replaced iphone 4s (apllecare replacement) that is not compatible with my current iTunes 10.6.  I have tried several times to upload th enew version of iTunes to no avial getting an error message after a "successful installation" and the itunes reverts to 10.6.  Since my imac was an older unit I had to update to OSX 10.6.8 (sucessfully) and increase my RAM.  I am 120bucks in the hole plus the 49 dolar surcharge for the iphone replacement and i am still no closer to restoring my phone.  Help please

    First backup your music and content.
    Then delete iTunes 10.6 Drag the application from Finder > Applications to Trash. Empty Trash
    Try and install 10.7 first iPhone 4s will work with this. You can find the download here
    http://support.apple.com/kb/DL1576
    Install it. Does itunes 10.7 now appear? Is your content all there? Connect up your iPhone and start syncing.
    From there if you want to you can upgrade to iTunes 11 but it is only necassary if you have an iPhone 5

  • I get an error message after downloading the latest update. It says to download only and then to install manually. How do I fix this?

    I get an error message after downloading the latest itunes update.  It says to download only and then to manually install. How do I do this?  Or, is there some way to make the download work?  Thank you.

    The message is 'errors have occurred, go to tools>download only and try installing manually'.  BTW, I am using Google Chrome.

  • TS1717 I get the following error message after installing the latest version of itunes via auto update:  "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

    I get the following error message after installing the latest version of itunes via auto update:  "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

    Hi pholewinski!
    I have a couple of articles for you here that I believe will help you with this issue. The first is an article on advanced troubleshooting, and it can be found here:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    If following that article's steps doesn't take care of the issue, you can try the things listed in this article, which is about permissions issues in iTunes:
    iTunes: Missing folder or incorrect permissions may prevent authorization
    http://support.apple.com/kb/TS1277
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • I updated to IOS 6 and received an error message after completing. Now my phone is in restore mode. Is there a way around restoring my phone completely?

    I updated to IOS 6 and received an error message after completing. Now my phone is in restore mode. Is there a way around restoring my phone completely?

    Once the Device is asking to be Restored with iTunes... it is too late to save anything...
    To minimise loss... Connect to iTunes on the computer you Usually Sync with and Restore from the most recent Backup...
    http://support.apple.com/kb/HT1414
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808

  • [solved] X11 desaster after todays update!

    Hi!
    I have some big problem after todays update of my system. I just installed the new Kernel 2.6.19-beyond (I need this one because of my reiser4 partitions) and rebuild the nvidia module for it. After the usual restart I'm no longer able to start KDM or KDE at all. Whenever I want to start KDE the either by using kdm or startx my computer starts working for about 5 seconds, the screen starts to switch as usual, but than I get thrown back to the console, having a blank screen laft and the computer doesn't react anymore. :shock:
    It also stops working immediately and I only can push trhe reset button. This is some fatal problem since I have lots of work that needs to be done. I also switched the xorg.conf to the nv or vesa module but still the same thing happens. I also rebuild the beyond kernel but the same thing.
    So can anybody help me with this. I need to get my work done and couldn't find any answer to this. This is very urgent since I already have a schedule that is almost out of control.
    Thanks a lot!

    Thanks for the advice. But I usually delete the cache after a while, so it just happened that I did this a couple of days ago so I don't have the previous kernel in there.
    About the Xorg.0.log, I already checked it for any error or warning by using
    more /var/log/Xorg.0.log | grep WW
    and
    more /var/log/Xorg.0.log | grep EE
    but there's nothing in there that indicates any problem. Both results don't show any warning or error. Besides that I didn't change the xorg.conf after the update and it worked before....
    But thanks anyway for trying to help me out. Do you (or anybody else here) have another idea that I might have not thought of?
    So I'm still stuck on this and my working clock is ticking.
    I really don't have any clue what this might cause.  :?
    Thanks!

  • HT4623 My iPhone wont update to iOS 6.1.3 I receive an error message after about 6 minutes

    My iPhone wont update to iOS 6.1.3 I receive an error message after about 6 minutes

    If you're having issues doing the update directly on the phone, try using iTunes on your computer to complete the update.
    Ensure you've done a backup & imported any photos or videos from your camera roll first, just in case something goes wrong.
    ~Lyssa

  • Error code after itunes update -42404

    error code after itunes update -42404 cannot connect to ipad it is telling me to restore ipad, and cannot connect to store...
    Message was edited by: CFC.Steve

    I assume you updated itunes on your computer. PC or Mac?
    Look at the posts in the More Like This area to the right side of this page.
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
     Cheers, Tom

  • I am getting this error message after upgrading to iOS5: "iTunes cannot sync apps to the iPad "ray's iPad" because the apps installed on the iPad could not be determined."

    I am getting this error message after upgrading to iOS5: "iTunes cannot sync apps to the iPad "ray's iPad" because the apps installed on the iPad could not be determined."
    I wiped it out and restored from backup but I am still getting the same message.

    I uninstalled and reinstalled iTunes and that fixed it. Here are the specific instructions that I was given.
    ~~~
    Try the following steps:
    1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    2. You should remove all instances of iTunes and the rest of the components listed below:
    it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    iTunes
    QuickTime
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
    3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch
    ~~~
    Good Luck!
    ~R

  • Error message after Upgraded from 2.53ghz (533 FSB) to 3.2ghz (HT)

    Hi! everyone,
    As you can see i'm a newbie on this board, however I've frequently visited here once in a while.  Anyway, the problem I currently have after I upgraded my cpu from 2.53 ghz to 3.2ghz HT (Northwood) is that I not very often (few times so forth since monday) see this error message after reboot my pc :
    ***Message starts here***
    A problem has been detected and windows has been shut down to prevent damage to your computer.
    If this is the first time you've seen this stop error restart your computer.  If this message appears again, follow these step:
    Run system diagnostic utility supplied by your hardware manufacturer.  In particularly run a memory check and check for faulty or mismatched memory, try changing video adapters.  
    Disable or remove any newly installed hardware or drivers....etc.
    Technical information
    ***STOP:  0x0000007F (0x00000008, 0xF7806d70, 0x00000000, 0x00000000)
    ....................................... ........etc.....
    ****Message ends here****
    As i stated before I've never seen this message before the upgrade.  So, here is my configurations:
    BEFORE
    875P NEO-LSR w/ BIOS v. 2.0
    2.53ghz 512 FSB CPU
    9500 Readon 128mb video card
    Dual IDE HD 80gb & 160 gb (NON SATA)
    1gb Dual channel memory (512mb on channel 1  -  512mb on channel 3) (KINGSTON pc2700 module)
    CURRENT
    857P NEO-LSR w/BIOS v. 2.0
    3.2ghz 800 FSB 512mb (L2 cache) CPU
    9500 Readon 128mb video card
    Dual IDE HD 80gb & 160 gb (NON SATA)
    1gb Dual channel memory (512mb stick on channel 1 - 512mb stick on channel 3) (KINGSTON pc2700 module) *
    * may be this causes this error message because as I read it on the discription page of the 875P NEO-LSR that it will only support DUAL channel (PC3200 type) with HT CPU.  So, i suspect this may cause the problem but I havent try to rearrange my memory to one channel (1 x 2) yet.
    I will greatly appreciate it if someone in here who may has experienced it before or know what all this means.  Please advise

    Thanks for your advise bejon2000.  
    Here is my situation, I just freshly installed Windows XP Pro w/SP2 prior to this cpu upgrade ...I did the os last weekend and upgraded the cpu the day or two after which is monday of this week.  So, can I just do the BIOS update now with the os already inplaced ???  I assum the aswer is yes, however I just wanted to confirm before I do it, you know  
    I've SiSoftware Utilities 2004 installed on the system as well, and after I did the Performance Tune-Up in SiSoftware ...This is what I got
    SiSoftware Sandra
    Display on Screen
    Device Type : Desktop/Notebook
    System Summary
    Analysing...
    Tip 2546 : Large memory modules should be ECC/Parity.
    Finished Successfully : Yes
    ****Mainboard Information
    Analysing...
    Power / Aux Temperature : 59.0°C / 138.2°F
    Notice 224 : SMBIOS/DMI information may be inaccurate.
    Tip 2505 : System does not support memory error detection. Some memory errors may go unnoticed.
    Warning 2506 : System does not support memory error correction. System will stop if memory errors are found.
    Tip 2511 : Some memory slots are free so the memory can be easily upgraded.
    Tip 2546 : Large memory modules should be ECC/Parity.
    Warning 2518 : Mainboard temperature is too high.
    Finished Successfully : Yes
    ***CPU & BIOS Information
    Analysing...
    Tip 210 : Processor 1 : Mainboard supports faster CPUs, so the CPU can be upgraded when needed.
    Notice 224 : Processor 1 : SMBIOS/DMI information may be inaccurate.
    Notice 224 : System BIOS : SMBIOS/DMI information may be inaccurate.
    Tip 212 : System BIOS : BIOS can be shadowed so check whether it is.
    Tip 211 : System BIOS : BIOS is flash-able and socketed so it can be upgraded when needed.
    Finised Successfully : Yes
    APM & ACPI Information
    Analysing...
    Notice 224 : SMBIOS/DMI information may be inaccurate.
    Finished Successfully : Yes
    PCI, AGP, CardBus Bus(es) Information
    Analysing...
    Finished Successfully : Yes
    Video System Information
    Analysing...
    Tip 319 : Primary Display Driver (display) : A refresh rate of at least 75Hz is recommended. Increase it if possible.
    Tip 323 : Primary Display Driver (display) : Remove the desktop wallpaper to save memory and improve performance.
    Tip 319 : RADEON 9500 (\\.\DISPLAY1) @ \\.\DISPLAY1 : A refresh rate of at least 75Hz is recommended. Increase it if possible.
    Tip 323 : RADEON 9500 (\\.\DISPLAY1) @ \\.\DISPLAY1 : Remove the desktop wallpaper to save memory and improve performance.
    Finished Successfully : Yes
    Windows Memory Information
    Analysing...
    Finished Successfully : Yes
    Drives Information
    Analysing...
    Warning : 1.44MB 3.5" (A:) : Cannot obtain drive information; check that a disk is in the drive and it is correctly formatted.
    Warning : CD-ROM/DVD (F:) : Cannot obtain drive information; check that a disk is in the drive and it is correctly formatted.
    Warning : Removable Drive (G:) : Cannot obtain drive information; check that a disk is in the drive and it is correctly formatted.
    Tip 1821 : Removable Drive (H:) : Label (name) drive.
    Finished Successfully : Yes
    Ports Information
    Analysing...
    Warning : Communications Port (COM1) : Port in use. [5]
    Finished Successfully : Yes
    Keyboard Information
    Analysing...
    Finished Successfully : Yes
    Mouse Information
    Analysing...
    Finished Successfully : Yes
    Sound Card Information
    Analysing...
    Finished Successfully : Yes
    Printer and Fax Information
    Analysing...
    Tip 402 : PaperPort Color : Print quality may have been set too low. Check settings.
    Finished Successfully : Yes
    MCI Devices Information
    Analysing...
    Finished Successfully : Yes
    Windows Information
    Analysing...
    Tip 1300 : Enter your company name or "Home" instead of "Unknown".
    Finished Successfully : Yes
    WinSock Information
    Analysing...
    Finished Successfully : Yes
    Processes Information
    Analysing...
    Tip 1601 : 6. tinhbuon0e - ********* - Winamp [Stopped] : Program consumes a large amount of memory.
    Tip 1601 : Adobe Photoshop - [main.psd @ 90.9% (Layer 4, RGB/8)] : Program consumes a large amount of memory.
    Tip 1601 : Adobe ImageReady : Program consumes a large amount of memory.
    Finished Successfully : Yes
    Modules Information
    Analysing...
    Finished Successfully : Yes
    OLE Information
    Analysing...
    Finished Successfully : Yes
    DirectX Information
    Analysing...
    Finished Successfully : Yes
    Network Information
    Analysing...
    Finished Successfully : Yes
    SCSI Information
    Analysing...
    Warning 2600 : WDC WD80 0JB-00CRA1       : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device.
    Warning 2600 : Maxtor 6 Y160P0           : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device.
    Warning 2600 : TOSHIBA  DVD-ROM SD-M1712 : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device.
    Warning 2600 : PLEXTOR  DVDR   PX-716A   : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device.
    Finished Successfully : Yes
    Font Information
    Analysing...
    Finished Successfully : Yes
    CMOS Information
    Analysing...
    Finished Successfully : Yes
    OpenGL Video Information
    Analysing...
    Finished Successfully : Yes
    Services Information
    Analysing...
    Tip 2130 : Alerter : Service may be disabled on Home/Professional OS version.
    Tip 2130 : Error Reporting Service : Service may be disabled on Home/Professional OS version.
    Tip 2130 : Help and Support : Service may be disabled on Home/Professional OS version.
    Tip 2130 : Removable Storage : Service may be disabled on Home/Professional OS version.
    Tip 2130 : IPSEC Services : Service may be disabled on Home/Professional OS version.
    Tip 2130 : Remote Registry : Service may be disabled on Home/Professional OS version.
    Tip 2130 : Secondary Logon : Service may be disabled on Home/Professional OS version.
    Tip 2130 : Windows Image Acquisition (WIA) : Service may be disabled on Home/Professional OS version.
    Tip 2130 : Distributed Link Tracking Client : Service may be disabled on Home/Professional OS version.
    Finished Successfully : Yes
    ATA/ATAPI Information
    Analysing...
    Warning 3100 : ATA device (fixed) : SMART not enabled; consider enabling for safety.
    Warning 3103 : ATA device (fixed) : Acoustic Management enabled. Peformance may be impaired.
    Finished Successfully : Yes
    Data Sources Information
    Analysing...
    Error : Could not connect to the database. : Could not connect to the database.
    Error : Could not connect to the database. : Could not connect to the database.
    Error : Could not connect to the database. : Could not connect to the database.
    Error : Could not connect to the database. : Could not connect to the database.
    Tip 3001 : ODBC Information : ODBC driver support old; should support ODBC 3.52 or later.
    Error : Tables/Views : No tables/views found.
    Error : Procedures/Functions : No procedures/functions found.
    Finished Successfully : Yes
    Hardware IRQ Settings
    Analysing...
    Finished Successfully : Yes
    DMA Settings
    Analysing...
    Finished Successfully : Yes
    I/O Settings
    Analysing...
    Finished Successfully : Yes
    Memory Resources
    Analysing...
    Finished Successfully : Yes
    Plug & Play Enumerator
    Analysing...
    Finished Successfully : Yes
    Performance Tune-up Wizard
    Finished Successfully : Yes
    There are actually some notices on MAINBOARD INFORMATION & CPU & BIOS INFORMATION, however I'm not sure what exactly they mean though.
    ******UPDATED*****
    here is the last part of the error that i described in my first post, I just saw it again right now
    ****STOP:  0x.......
    **** sysaudio.sys - Address F6EAA481 base at F6EA7000, Datestamp 41107F1a
    Beginning dump of physical memory
    Dumping physical memory to disk:  (counting from 1 to 99 then it shut down the computer)

Maybe you are looking for