Locale errors

I am getting locale errors like when i use any shell.
-bash: warning: setlocale: LC_CTYPE: cannot change locale (en_IN.UTF-8): No such file or directory
-bash: warning: setlocale: LC_NUMERIC: cannot change locale (en_IN.UTF-8): No such file or directory
-bash: warning: setlocale: LC_TIME: cannot change locale (en_IN.UTF-8): No such file or directory
-bash: warning: setlocale: LC_COLLATE: cannot change locale (en_IN.UTF-8): No such file or directory
-bash: warning: setlocale: LC_MESSAGES: cannot change locale (en_IN.UTF-8): No such file or directory
How do i remove them?
Any help would be appreciated.

Plz try and read this:
https://wiki.archlinux.org/index.php/Installation_Guide

Similar Messages

FTP_R3_TO_SERVER gives error " FTP SubCommand Local Error"

Hi
I have an issue with the transfer of data from SAP internal table to FTP server
I am using the function module FTP_R3_TO_SERVER.
Using this function module I am able to transfer data only some times.
Most of the time it gives the error message "FTP SubCommand Local Error" .
Could someone help me resolve this error.
Its quite urgent.
Help to resolve this is much appreciated.
Regards

Hi Sharayu,
Kindly give your mail id I will send the code to your mail id.
Regards
Sudheendra

My SAP SRM Application Monitors Purchase order / local errors

I am seeing local errors in the monitor under Purchase order. The message is incorrect status in pricing, but when i click on the message i get no further information. How can I track there errors

Hi,
Check your outbound queue in SMQ2 if the error is there for more details. pricing error is related with the IPC so check if your IPC destinations are working in SM59.
Please have also a look into following threads :
Incorrect status in pricing - SRM server 5.5
External Requirements to SRM
Hope this helps
Laurent.

"FTP Subcommand: local error' in DMS

Hi Forum..
I have a problem with DMS while i'm doing Check in As 'Vault'
i'm getting an error "FTP Subcommand: local error'
wat r the settings tht i hav to do to overcum this error.
i have already checked with reports like
RSFTP002 & MCDOKVAULT.
itz wrking fine wit those reports but in DMS its throughing da above error.
Regards,
Vijay.
P.S: Useful info will be awarded with Points

Hi Vijay,
Is your system a Unicode system?
If so the problem can be resolved if you have a unicode version of
SAPFTP program in your desktop according to note 93042.
Please follwo the note 93042 and download the latest sapftp.
Execute sapftp -V on your command prompt. This should show you the ftp
version stating if it is unicode.
Best regards,
Christoph
P.S.: Please reward points for useful information.

Application monitor PO local errors "Buffer table not up to date"

Hi Experts,
Any idea about the cause of below error, no PO's effected, but in RZ20 i could see below message
General details
Column                 Contents
Node name (MTE)        ESP\Business to Business Procurement(100)\...\Purchase Order\Local errors
System                 ESP
Context                Business to Business Procurement(100)
Object name            Purchase Order
Short name             Local errors
Type                   Status attribute
Class                  BBP_PO_LOCAL
Highest alert          Red
Number of alerts       1
Definition status      ENABLED
Customizing status     DBSET
Auto-reaction method   -
Definition status      -
Runtime status         -
Data collection method -
Definition status      -
Runtime status         -
Analysis method        BBP_ANALYZE_PO_LOCAL
Definition status      AL_TD_DEF_CHECKED
Status attribute details
Column                Contents
Node name (MTE)       ESP\Business to Business Procurement(100)\...\Purchase Order\Local errors
System                ESP
Context               Business to Business Procurement(100)
Object name           Purchase Order
Short name            Local errors
Date                  15.09.2009
Time                  15:12:04
Last reported message Buffer table not up to date
Not able to find for which document this error has arised and why
Thx
Jai

Below is the SM21 Log
Details Page 2 Line 20 System Log: Local Analysis of lbesrmp                  1
Time     Type Nr Clt User   TCode Grp N Text
15:12:04 DIA 001 100 SARFOW       AB 0 Run-time error "UNCAUGHT_EXCEPTION" occurred
Run-time error "UNCAUGHT_EXCEPTION" occurred
Details
Recording at local and central time........................ 15.09.2009 15:12:04
Task...... Process                     User...... Terminal Session TCode Program Cl Problem cl          Packag
07716      Dialog work process No. 001 SARFOW     10.0.1.7       1               T Transaction Problem SABP
Further details for this message type
Module nam Line Error text
abexcp     2099 raiseExcp
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
abcdefghijklmnopqrstuvwxyz .. UNCAUGHT_EXCEPTION
Technical details
File Offset RecFm System log type     Grp N variable message data
290 80280 l     Error (Module, Row) AB 0 raiseExcp                                           abexcp 2099

Localized Errors (xerces, xml-schema)

i would like to get localized error messages (ex. in german) after parsing a xml-schema with the SchemaFactory.
i've tried out the typical way with "Locale.SetDefault" and e.getLocaleMessage" in a selfwritten ErrorHandler but this doesn't work ...

i would like to get localized error messages (ex. in
german) after parsing a xml-schema with the
SchemaFactory.
i've tried out the typical way with
"Locale.SetDefault" and e.getLocaleMessage" in a
selfwritten ErrorHandler but this doesn't work ...I have the same problem as above. Is there a way to customise schema validation messages?
example
cvc-attribute.4: The value ''{2}'' of attribute ''{1}'' on element ''{0}'' is not valid with respect to its fixed '{'value constraint'}'. The attribute must have a value of ''{3}''.
to become
Element "{0}" value is invalid. Choose from "{3}".
thanks

FTP Sub Command: Local Error with EasyDMS

We have been using DMS for several years. We have a vault setup and are able the checkin files with FTP via SAPGUI with no problems. Recently we have been looking at EasyDMS. We have it installed and can login ok. When we try to drag a file into the windows explorer the popup appears and we can enter the META data. When the file is checkin via FTP we get FTP Sub Command: Local Error.
Any suggestions would be appreciated.

Tom,
We have encountered the exact same siituation with EasyDMS, we currently have had an OSS call to SAP for 2 weeks that ended up with the developers in Germany and bouncing the issue back to technical support and stating that they have no idea!
We are also interested in an answer, sorry I can't help you, but you are not alone.

Soundconverter gives locale error (x86-64)(Solved)

What corrective action to supply a supported locale?
Edit: Needed to generate locales in locale-gen as root.
Last edited by lilsirecho (2009-01-06 16:51:58)

Added infor...operating in cmd line as root.
ash-3.2# soundconverter -t /home/k3bCdCopy3 /home/.mp3
SoundConverter 1.4.1
(process:3243): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
using Gstreamer version: 0.10.21, Python binding version: 0.10.13
Traceback (most recent call last):
File "/usr/bin/soundconverter", line 86, in <module>
locale.setlocale(locale.LC_ALL,"")
File "/usr/lib/python2.6/locale.py", line 494, in setlocale
return _setlocale(category, locale)
locale.Error: unsupported locale setting

FAILED: 3X HOST (mymachine.local) error: NewMoviewFromFile failed -2048

I'm getting this error for either/or machine in my cluster when I try to render a Motion project file to a DV NTSC quicktime via a Compressor batch:
FAILED: 3X HOST (mymachine.local) error: NewMovieFromFile failed -2048
Any thoughts as to what that error code really means?
(Cluster controller - G5 2x2.5; PB17 G4 1.25 Services only)

I've seen this error when our Xsan was configured for high data transfers. Turns out there the san was corrupting the segments, and the nodes couldn't read the segments and assemble the files. Only the node that wrote the segment could read it. After talking with Shake support, turned out setting the san to default settings fixed it.

'Unknown error (0x8000500c)' and 'A local error has occurred' exceptions

Hi
I have a below code which causes the two exceptions.
Unknown Error
A local error has occurred
Can anyone tell me what is reason for this exceptions and solution for that as well.

Hi Archana,
You need to pass the FQDN to DirectoryEntry API. Please check the below links:
http://stackoverflow.com/questions/9737599/activedirectory-error-0x8000500c-when-traversing-properties
If that doesn't help, then try using the cache refresh steps mentioned in the below link before running your app:
http://support2.microsoft.com/default.aspx?ID=KB;EN-US;Q241981
Hope that helps.
(Please mark as answer if it resolves your query. Please upvote if this post is helpful.)
Rajesh.

Locale Error while migrating from One Server to another Server in Essbase

Hi Gurus,
Actually we are trying to migrate the Essbase Native users/groups from Windows 2003 Server to 2008.In windows 2003 the Version is 11.1.1 and in 2008 its 11.1.2.While Migrating i faced he below error.I was using the Migration Wizard to migrate.
Start of Application Migration.
[D4W0218G.americas.hpqcorp.net:1423.Fiji] MigrateApplication February 15, 2013 10:30:04 AM SGT Failed
Error: Source and target servers should be of same locale for migration. [Source Locale: English_UnitedStates.MS1252@Binary, Target Locale: English_UnitedStates.Latin1@Binary]
End of Application Migration.
I even tried to change the target local to source local name in Environment Variables -->ESSLANG=English_UnitedStates.MS1252@Binary but of no use.
Can anyone please suggest me how to rectify this error.
Regards,
Naveen

Hi,
Review the section beginning at page 663 on unicode applications from the Essbase Database Admin Guide. On windows this is the ESSLANG environment variable on unix there is a file that you must modify.
See http://download.oracle.com/docs/cd/E12825_01/epm.111/esb_dbag.pdf
I do suggest you read the whole section I referenced above. You would not be changing the source server. It is whatever format it is. You need to change in windows 2008.
Mark if this helps you.
Regards,
Kishore Rout

ITunes 9.0 - Not localized Error Message

I downloaded/upgraded my iTunes twice and both times it popped up an error message saying "This version of iTunes has not been correctly localized for this language. Please run the English version". Help? I want my 5000 songs back

Same here. Upgraded from software update, then tried to fix via DLing from the website. No good. There is another person who started a thread re: same error and he had success trashing files then reinstalling. However, he was on Snow Leopard 10.6. It seems it may be a Tiger problem, as we are all on 10.4.11.
Any ideas? I miss my tunes

VB API EsbImport() does not create a local error file

Hi,
According to the documentation, if i specify a message string for errors a file will be created locally whenever there is a loading error (like a missinf membr in Essbase).
Does any one have experience with that? my program works but a file is not being created when a member is missing.
in the EsbInit i used the ARBORPATH environemtn variable as the client path
in the EsbImport i used "ImportErrors.txt"
Any help will be appreicated
Thanks
Kobi
the init structure is:
With oInit
.Version = ESB_API_VERSION
.LocalPath = GetEnvironemtnVar("ARBORPATH")
.MessageFile = ""
.HelpFile = String$(ESB_PATHLEN, vbNullChar)
.MaxHandles = 10
.ClientError = ESB_TRUE ' Use EsbGetMessage to retrieve messages
.ErrorStack = 100
End With
the import relevant part is
strErrorName = "ImportErrors.txt"
AbortOnError = ESB_YES ' Abort on the first error
' import
sts = EsbImport(hCtx, T_Rules, T_Data, T_User, strErrorName, AbortOnError)

I don't believe it is supported yet. It wasn't even supported for the last OS.

Oracle 10 / Oracle 9i Installation: Java locale Error

I'm running Gentoo Linux AMD64, and am attempting to install Oracle 10g (or 9i, whichever will install). When I attempt to run ./runInstaller --ignoresysprereqs, I get the following error:
current locale is not supported in X11, locale is set to CX locale modifiers are not supported, using default.
That in itself is not too threatening. However, then the java throws an exception, stating:
Exception java.lang.InternalError: Current locale is not supported occured..
In the 9i, I looked in the jre directory and found that the java does not have the en_US locale. I've tried a few things already, including changing my locale to en_US, and to others, including locales specified in that jre directory. I have verified that my glibc also supports those locales.
If I back up the jre and link my 64-bit java, it will launch, but give an OUI error saying it cannot determine the platform of this system.
Is there anything else I can try to get this working? Maybe bypassing the OUI system check?
Thanks
-Jeff

Found the problem. When I upgraded from 2004.3 profile to 2005.0, something went wrong. Went back to the old profile, and attempted again. Seems to have fixed the problem for me.

Locale Error Message After Todays Update [Solved]

I experienced an error message regarding something about cannot locale en-US.UTF8 after an update and reboot today.
I got rid of the error message by uncommenting:
en_US.UTF-8 UTF-8
en_US ISO-8859-1
in
/etc/locale.gen
Prior to fix:
$ locale
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
After fix:
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES=C
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
Didn't have time to check into this issue in much detail and would appreciate any additional info.

Additional info?
glibc has been upgraded today. You probably haven't merged the pacnew files.

Locale errors

Similar Messages

Maybe you are looking for