Locale not supported

I updated tarantella native client to
version 3.42 for solaris2.8.
Now I get the error message
<Failed to process Tarantella server information>
at login. (version 3.3 works fine)
The command line shows warnings:
Warning: locale not supported by Xlib, locale set to C
Warning: X locale modifiers not supported, using default
It seems to be problem with locale settings, already described in a
previous newsgroup posting.
Setting LANG=en_GB (or other values) did not help.
Where I can get correct locale-files?
(Not included in the client distributions)
Thanks a lot,
JU

Please check your Apache Logfile.
The first connect to SGD by NC is to the Web Server. NC requested
serverinfo.html
Try in a Webbrowser:
http://<servername>/tarantella/cgi-bin/ttawebtop.cgi/tarantella/resources/login/sco/tta/boot/serverinfo.html
You will get an empty page. Look into the Source code of this empty page.
It show something like:
<html><head>


<title>Tarantella server information</title>











</html>
This is the information NC needs to connect to your SGDEE Server.
Check you can telnet to ConnectionHost Port AsadPort
TAB
"juschlue" <[email protected]> schrieb im Newsbeitrag
news:[email protected]...
Thank you for the solution that helped to solve
the locale problem. Unfortunally there is still
the error
<Failed to process Tarantella server information>
after approx. 20sec during login.
Our previous version 3.20 works correct
with the same server/login/pw.
Is there a way to identify (debug) the problem.
Thank you very much,
Jens-Uwe
Tillmann Basien wrote:
This is my answer to this issue:
http://www.tbsol.de/de/modules/news/article.php?storyid=64
TAB
\"juschlue\" <[email protected]> schrieb im Newsbeitrag
news:[email protected]...
I updated tarantella native client to
version 3.42 for solaris2.8.
Now I get the error message
<Failed to process Tarantella server information>
at login. (version 3.3 works fine)
The command line shows warnings:
Warning: locale not supported by Xlib, locale set to C
Warning: X locale modifiers not supported, using default
It seems to be problem with locale settings, already described in a
previous newsgroup posting.
Setting LANG=en_GB (or other values) did not help.
Where I can get correct locale-fil
es?
(Not included in the client distributions)
Thanks a lot,
JU

Similar Messages

Locale not supported by Xlib

When I try to run some programs, they warn that the locale is not supported by Xlib. The ones that warn me, can't get correct input from my keyboard, especially characters like é, ã, â, etc.
Here are some outputs:
$ urxvt
urxvt: the locale is not supported by Xlib, continuing without locale support.
$ xterm
Warning: locale not supported by Xlib, locale set to C
Warning: X locale modifiers not supported, using default
xterm: Failed to open input method
$ cat /etc/locale.conf
LANG=en_US.utf8
LC_COLLATE=C
$ grep -v '^#' /etc/locale.gen
en_US.UTF-8 UTF-8
$ locale
LANG=en_US.utf8
LC_CTYPE="en_US.utf8"
LC_NUMERIC="en_US.utf8"
LC_TIME="en_US.utf8"
LC_COLLATE=C
LC_MONETARY="en_US.utf8"
LC_MESSAGES="en_US.utf8"
LC_PAPER="en_US.utf8"
LC_NAME="en_US.utf8"
LC_ADDRESS="en_US.utf8"
LC_TELEPHONE="en_US.utf8"
LC_MEASUREMENT="en_US.utf8"
LC_IDENTIFICATION="en_US.utf8"
LC_ALL=
$ locale -a
C
POSIX
en_US.utf8

$ cat /etc/locale.conf
LANG=en_US.utf8
LC_COLLATE=C
You forgot the dash. Caps might matter as well. I have:
$ cat /etc/locale.conf
LANG=en_US.UTF-8
You could also try running "locale-gen" as root and here's a wiki article about how to correctly set this all up:
https://wiki.archlinux.org/index.php/Be … ide#Locale
Last edited by weirddan455 (2013-05-17 04:21:38)

Locale not supported by C library [solved]

When running a xdialog script, I am getting this error.
Gdk-WARNING **: locale not supported by C library
Example:
#!/bin/sh
Xdialog --title "TEST BOX"
--msgbox "Hi, this is a simple message box. You can use this to
display any message you like. The box will remain until
you press the ENTER key." 10 41
case $? in
0)
echo "OK";;
255)
echo "Box closed.";;
esac

phrakture wrote:The "locale not supported" message means you did not generate the locale info for the locale you're running under.
For my information, where its said to do this? When installing a fresh install and all packages updated, the locale problem is there. Is this a bug or something what everyone supposed to know?
Why the default locale configure is not enough in /etc/rc.conf, why to bother about /etc/locale.gen?
rc.conf wrote:LOCALE="en_US.utf8"
EDIT:
I took a look at /etc/locale.gen. I don't know what to uncomment, its like reading a foreign language.

Locale not supported by C library?

Hi,
When trying concky or lxappearance the terminal says:
Gdk-WARNING **: locale not supported by C library
Using the fallback 'C' locale
What have I done wrong or what have I missed?

http://wiki.archlinux.org/index.php/Locale

Locale not supported problem

Hi, I´m an Italian Ubuntu user who is trying to feel new experiences with awesome distros
I´ve got a problem when trying to run archibald:
# ./archibald
(gksu:3489): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
I´ve already read other posts that explain how to fix this problem, but it didn´t work for me.
My locale -a output:
# locale -a
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
C
POSIX
en_IE
en_IE.iso88591
en_IE.iso885915@euro
en_IE.utf8
en_IE@euro
en_US
en_US.iso88591
en_US.utf8
it_CH
it_CH.iso88591
it_CH.utf8
it_IT
it_IT.iso88591
it_IT.iso885915@euro
it_IT.utf8
it_IT@euro
italian
As you see, I tried to install all English and all Italian locales, but the error remains
Could someone help me, please?

# locale
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
LANG=it_IT@EURO
LC_CTYPE="it_IT@EURO"
LC_NUMERIC="it_IT@EURO"
LC_TIME="it_IT@EURO"
LC_COLLATE=C
LC_MONETARY="it_IT@EURO"
LC_MESSAGES="it_IT@EURO"
LC_PAPER="it_IT@EURO"
LC_NAME="it_IT@EURO"
LC_ADDRESS="it_IT@EURO"
LC_TELEPHONE="it_IT@EURO"
LC_MEASUREMENT="it_IT@EURO"
LC_IDENTIFICATION="it_IT@EURO"
LC_ALL=
Thanks!

[Solved] Gtk-WARNING **: Locale not supported by C library

Hi all,
Since the gnome 3.2 update I have the following error while working on the terminal:
"Gtk-WARNING **: Locale not supported by C library"
I have follow the wiki but nothing change, any idea?
Regards,
Last edited by sweetthdevil (2011-10-07 16:48:52)

fixed - the problem was with the system settings > Region and language
All needed to be set there...

Gdk-WARNING **: locale not supported by C library

How I can set LC_CTYPE in ArchLinux.
When I try to run apps with. I get warning and not get unicode support.
$ env LC_CTYPE=en_US.UTF-8 some_app
(process:1256): Gdk-WARNING **: locale not supported by C library
(process:1256): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.

phrakture wrote:The "locale not supported" message means you did not generate the locale info for the locale you're running under.
For my information, where its said to do this? When installing a fresh install and all packages updated, the locale problem is there. Is this a bug or something what everyone supposed to know?
Why the default locale configure is not enough in /etc/rc.conf, why to bother about /etc/locale.gen?
rc.conf wrote:LOCALE="en_US.utf8"
EDIT:
I took a look at /etc/locale.gen. I don't know what to uncomment, its like reading a foreign language.

Gtk-WARNING **: Locale not supported by C library.

Hi, I'm pretty new to Linux and I could really use some help on this one! This is my second Arch install. After the first, which I installed to learn about Linux, I figured there'd be more user-friendly and complete distro's (like SUSE, Debian, etc.). I was wrong
Anyway, this is my second install, but ever since I installed it (and X11, ati-fglrx, gnome and gnome-extra) certain apps give my this error when run from a console. All of them start and work perfectly, except one: gnome-keyboard-properties. I fails to run and starts a bug buddy report window, while outputting the following messages on the console:
[***@*** ~]$ gnome-keyboard-properties
(gnome-keyboard-properties:4727): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
(gnome-keyboard-properties:4727): Gdk-WARNING **: locale not supported by C library
(gnome_segv2:4728): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
(gnome_segv2:4728): Gdk-WARNING **: locale not supported by C library
(bug-buddy:4729): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
(bug-buddy:4729): Gdk-WARNING **: locale not supported by C library
** (bug-buddy:4729): WARNING **: Couldn't load icon for Open Folder
Failed to read a valid object file image from memory.
I've generated the en_US.utf8 locale using locale-gen, edited rc.conf accordingly and I used the hwd-generated keyboard entry for xorg.conf that worked on my previous install.
I've been trying things with my xorg.conf. I used to leave XkbLayout and XkbVariant empty, like in the hwd-generated example, but now I'm using this:
Section "InputDevice"
Identifier "Cherry"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" "intl"
EndSection
This has a noticable effect: both ' and " require an extra spacebar hit. Pretty anoying, but this at least shows is had effect on gnome. Also, the Keyboard Indicator Applet shows the layout correctly.
I've tried other things, like uninstalling gnome and gnome-extra using pacman -Rnd as to leave no trace, and reïnstalling it. And I can't find anything on Google...
PS I'm running this on an athlon64 with a radeon x700, ftp-install from a 0.7.2 i686 base CD.

I've done a total reïnstall - again. gnome-keyboard-properties works again! However, I still get these errors when opening Gtk-apps:
(gksu:4669): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
I've left xorg.conf's XkbLayout emply, which defaults to "us". There's a related option called "KEYMAP" in rc.conf, which has "us" as default, too. As I said, gnome-keyboard-properties now works and correctly displays "Generic 105-key.." etc. and "U.S. English".
I think I now have /etc/hosts' loopback correctly setup:
127.0.0.1 localhost.localdomain myhostname
192.168.x.xxx myhostname.localdomain myhostname
I'm really out of ideas here. Does anyone know whether this is normal or harmful?
[[ EDIT ]]
Solved. I actually forgot to generate the locales this time. I don't know what it was last time...
Last edited by ppvg (2007-02-05 21:21:21)

Utf8 locale not supported

How do you add utf8 support to the system for Xwindow applications?

It's probably best to ask stuff like this in the technologies forum:
https://discussions.apple.com/community/mac_os/mac_os_x_technologies

X does not support locale

Hellow, i setup SGD 4.2, but when i start an application or object manager via ttwebtop locally on the server. I get this error messages everytime after starting:
/opt/tarantella/bin/ttwebtop -url http://localhost/tarantella.
bash-2.05# /opt/tarantella/bin/ttwebtop
X does not support locale
Cannot set input modifiers
Warning: locale not supported by Xlib, locale set to C
Warning: X locale modifiers not supported, using default
Warning: Cannot convert string "-dt-interface system-medium-r-normal-m*-*-*-*-*-*-*-*-*" to type FontSet
Warning: Unable to load any usable fontset
Warning: Cannot convert string "-dt-interface system-medium-r-normal-m*-*-*-*-*-*-*-*-*" to type FontList
Warning: Cannot convert string "-dt-interface system-medium-r-normal-m*-*-*-*-*-*-*-*-*:" to type FontList
Warning: Cannot convert string "-dt-interface user-medium-r-normal-m*-*-*-*-*-*-*-*-*" to type FontSet
Warning: Unable to load any usable fontset
Warning: Cannot convert string "-dt-interface user-medium-r-normal-m*-*-*-*-*-*-*-*-*" to type FontList
Warning: Cannot convert string "-dt-interface user-medium-r-normal-m*-*-*-*-*-*-*-*-*:" to type FontList
bash-2.05#
Can anyone help me.
Extra input:
Solaris 9/05 SPARC
THX

Did you ever get this working?

"error: thread-local storage not supported for this target"

I have a program that uses the __thread specifier, to be run on a Solaris 9/UltraSprac.
I am not able to compile it using gcc 3.4.4 or 4.0.4, it emits the msg "error: thread-local storage not supported for this target".
xz@gamera% gcc -v -Wall -D_REENTRANT -c -o func_stack.o func_stack.c
Reading specs from /opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/specs
Configured with: ../srcdir/configure --prefix=/opt/gcc/3.4.4 --disable-nls
Thread model: posix
gcc version 3.4.4
/opt/gcc/3.4.4/libexec/gcc/sparc-sun-solaris2.8/3.4.4/cc1 -quiet -v -D_REENTRANT -DMESS func_stack.c -quiet -dumpbase func_stack.c -mcpu=v7 -auxbase-strip func_stack.o -Wall -version -o /var/tmp//cc0poHSN.s
ignoring nonexistent directory "/usr/local/include"
ignoring nonexistent directory "/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/../../../../sparc-sun-solaris2.8/include"
#include "..." search starts here:
#include <...> search starts here:
/opt/gcc/3.4.4/include
/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/include
/usr/include
End of search list.
GNU C version 3.4.4 (sparc-sun-solaris2.8)
        compiled by GNU C version 3.4.4.
GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
func_stack.c:16: error: thread-local storage not supported for this target
func_stack.c:17: error: thread-local storage not supported for this target
func_stack.c:19: error: thread-local storage not supported for this target
xs@gamera% gcc -v -D_REENTRANT -c -o func_stack.o func_stack.c
Using built-in specs.
Target: sparc-sun-solaris2.9
Configured with: /net/clpt-v490-0/export/data/bldmstr/20070711_mars_gcc/src/configure --prefix=/usr/sfw --enable-shared --with-system-zlib --enable-checking=release --disable-libmudflap --enable-languages=c,c++ --enable-version-specific-runtime-libs --with-cpu=v9 --with-ld=/usr/ccs/bin/ld --without-gnu-ld
Thread model: posix
gcc version 4.0.4 (gccfss)
/pkg/gcc/4.0.4/bin/../libexec/gcc/sparc-sun-solaris2.9/4.0.4/cc1 -quiet -v -I. -iprefix /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/ -D__sparcv8 -D_REENTRANT -DMESS func_stack.c -quiet -dumpbase func_stack.c -mcpu=v9 -auxbase-strip func_stack.o -version -m32 -o /tmp/ccjsdswh.s -r /tmp/cc2w4ZRo.ir
ignoring nonexistent directory "/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/../../../../sparc-sun-solaris2.9/include"
ignoring nonexistent directory "/usr/local/include"
ignoring nonexistent directory "/usr/sfw/lib/gcc/sparc-sun-solaris2.9/4.0.4/include"
ignoring nonexistent directory "/usr/sfw/lib/../sparc-sun-solaris2.9/include"
#include "..." search starts here:
#include <...> search starts here:
/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/include
/usr/sfw/include
/usr/include
End of search list.
GNU C version 4.0.4 (gccfss) (sparc-sun-solaris2.9)
        compiled by GNU C version 4.0.4 (gccfss).
GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
func_stack.c:16: error: thread-local storage not supported for this target
func_stack.c:17: error: thread-local storage not supported for this target
func_stack.c:19: error: thread-local storage not supported for this targetJust as comparison, the corresponding output of compiling another file which does not have __thread declaration is as follows:
xz@gamera% gcc -v -Wall -D_REENTRANT -c -o common.o common.c
Reading specs from /opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/specs
Configured with: ../srcdir/configure --prefix=/opt/gcc/3.4.4 --disable-nls
Thread model: posix
gcc version 3.4.4
/opt/gcc/3.4.4/libexec/gcc/sparc-sun-solaris2.8/3.4.4/cc1 -quiet -v -D_REENTRANT -DMESS common.c -quiet -dumpbase common.c -mcpu=v7 -auxbase-strip common.o -Wall -version -o /var/tmp//cc4VxrLz.s
ignoring nonexistent directory "/usr/local/include"
ignoring nonexistent directory "/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/../../../../sparc-sun-solaris2.8/include"
#include "..." search starts here:
#include <...> search starts here:
/opt/gcc/3.4.4/include
/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/include
/usr/include
End of search list.
GNU C version 3.4.4 (sparc-sun-solaris2.8)
        compiled by GNU C version 3.4.4.
GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
/usr/ccs/bin/as -V -Qy -s -xarch=v8 -o common.o /var/tmp//cc4VxrLz.s
/usr/ccs/bin/as: Sun WorkShop 6 update 2 Compiler Common 6.2 Solaris_9_CBE 2001/04/02Note that the last 2 lines seem to suggest that a Sun assembler is used as the back-end of gcc. I am not sure whether the failure to compile the first file (with __thread) was due to the incompatibility of this Sun assembler. In the first case, the error msg was emitted before these 2 lines are printed.
I further read a post about gcc 3.3.3's inability to compile code that has __thread in it, on a HP-UX 11.11: http://forums12.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1216595175060+28353475&threadId=1148976 The conclusion seems to suggest that "the 2.17 GNU assembler did not support thread local storage" and gcc sees that and thus disallows TLS.
If the assembler is the culprit, then does anyone know whether this "Sun WorkShop 6 update 2" assembler in my installation can work with TLS? And how come a Sun assembler becomes the back-end of gcc? I read that gas (the GNU assembler) is the default backend of gcc. (How) can one specify the assembler to be used for gcc?
As an aside, I am able to compile my file on this same Solaris 9/UltraSparc platform using the Sun Studio 12 C Compiler:
xz@gamera% cc -V -# -D_REENTRANT -c -o func_stack.o func_stack.c
cc: Sun C 5.9 SunOS_sparc Patch 124867-01 2007/07/12
### Note: NLSPATH = /pkg/SUNWspro/12/prod/bin/../lib/locale/%L/LC_MESSAGES/%N.cat:/pkg/SUNWspro/12/prod/bin/../../lib/locale/%L/LC_MESSAGES/%N.cat
###     command line files and options (expanded):
### -c -D_REENTRANT -V func_stack.c -o func_stack.o
/pkg/SUNWspro/12/prod/bin/acomp -xldscope=global -i func_stack.c -y-fbe -y/pkg/SUNWspro/12/prod/bin/fbe -y-xarch=generic -y-xmemalign=8i -y-o -yfunc_stack.o -y-verbose -y-xthreadvar=no%dynamic -y-comdat -xdbggen=no%stabs+dwarf2+usedonly -V -D_REENTRANT -m32 -fparam_ir -Qy -D__SunOS_5_9 -D__SUNPRO_C=0x590 -D__SVR4 -D__sun -D__SunOS -D__unix -D__sparc -D__BUILTIN_VA_ARG_INCR -D__C99FEATURES__ -Xa -D__PRAGMA_REDEFINE_EXTNAME -Dunix -Dsun -Dsparc -D__RESTRICT -xc99=%all,no%lib -D__FLT_EVAL_METHOD__=0 -I/pkg/SUNWspro/12/prod/include/cc "-g/pkg/SUNWspro/12/prod/bin/cc -V -D_REENTRANT -c -o func_stack.o " -fsimple=0 -D__SUN_PREFETCH -destination_ir=yabe
acomp: Sun C 5.9 SunOS_sparc Patch 124867-01 2007/07/12Interestingly, the output no longer mentions the "/usr/ccs/bin/as: Sun WorkShop 6 update 2" assembler.

Just as another comparison, I compiled a file without __thread on the Solaris 9/UltraSparc platform using gcc 4.0.4. Not surprisingly it worked. But I no longer see the mention of the Sun assembler as in the case of gcc 3.4.4. Nor did I see the mention of "GNU assembler" as in the case of gcc 4.0.4/Solaris 10/x86. Instead, I saw something called "iropt" and "cg". Does anyone know what they are?
xz@gamera% gcc -v -Wall -D_REENTRANT -c -o common.o common.c
Using built-in specs.
Target: sparc-sun-solaris2.9
Configured with: /net/clpt-v490-0/export/data/bldmstr/20070711_mars_gcc/src/configure --prefix=/usr/sfw --enable-shared --with-system-zlib --enable-checking=release --disable-libmudflap --enable-languages=c,c++ --enable-version-specific-runtime-libs --with-cpu=v9 --with-ld=/usr/ccs/bin/ld --without-gnu-ld
Thread model: posix
gcc version 4.0.4 (gccfss)
/pkg/gcc/4.0.4/bin/../libexec/gcc/sparc-sun-solaris2.9/4.0.4/cc1 -quiet -v -iprefix /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/ -D__sparcv8 -D_REENTRANT -DMESS common.c -quiet -dumpbase common.c -mcpu=v9 -auxbase-strip common.o -Wall -version -m32 -o /tmp/ccSGJIDD.s -r /tmp/ccKuJz76.ir
ignoring nonexistent directory "/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/../../../../sparc-sun-solaris2.9/include"
ignoring nonexistent directory "/usr/local/include"
ignoring nonexistent directory "/usr/sfw/lib/gcc/sparc-sun-solaris2.9/4.0.4/include"
ignoring nonexistent directory "/usr/sfw/lib/../sparc-sun-solaris2.9/include"
#include "..." search starts here:
#include <...> search starts here:
/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/include
/usr/sfw/include
/usr/include
End of search list.
GNU C version 4.0.4 (gccfss) (sparc-sun-solaris2.9)
        compiled by GNU C version 4.0.4 (gccfss).
GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
/pkg/gcc/4.0.4/SUNW0scgfss/4.0.4/prod/bin/iropt -F -xarch=v8plus -xchip=generic -O1 -xvector=no -xbuiltin=%none -xcache=generic -Qy -h_gcc -o /tmp/ccUl4mVM.ircg /tmp/ccKuJz76.ir -N/dev/null -is /tmp/ccSGJIDD.s
/pkg/gcc/4.0.4/SUNW0scgfss/4.0.4/prod/bin/cg -Qy -xarch=v8plus -xchip=generic -OO0 -T3 -Qiselect-C0 -Qrm:newregman:coalescing=0 -xcode=abs32 -xcache=generic -xmemalign=8i -il /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4//gccbuiltins.il -xvector=no -xthreadvar=no%dynamic -xbuiltin=%none -Qassembler-ounrefsym=0 -Qiselect-T0 -Qassembler-I -Qassembler-U -comdat -h_gcc -is /tmp/ccSGJIDD.s -ir /tmp/ccUl4mVM.ircg -oo common.o

BUG! Not system locale Filenames support for 32-bit applications error in Windows 8.1 x64 and other microssoft x64 OS-s.

BUG! Not system locale Filenames support for 32-bit applications error in Windows 8.1 x64.
All Windows x64 (XP,2003,2007,Vista,7,8) have no support for not system locale filenames|foldernames for all 32-bit applications. I think it is BUG!
For example, it is possible to read files|folders with French or Chinese in English locale windows installed, rename it, but it is not possible open it, edit or delete. (ERRORS: File not found OR Unknown format)
With using 64-bit programs no such problems. How does it works and how can I fix this? Is it problem with encoding in translating kernel instructions for 32-bit apps in x64 Windows OS's? Whether there are
solutions to this problem OR some hacks|fixes?

Hi,
Have you installed the language package for French or Chinese?
If no, please download the language package and install them.
To download language package, please click the link below,
http://windows.microsoft.com/en-US/windows/language-packs#lptabs=win7
Best Regards.
Steven Lee
TechNet Community Support

System.Data.SqlClient.SqlException: The locale identifier (LCID) 16393 is not supported by SQL Server

I have SQL Server 2005 Developer Edition. And my operating system is Windows Vista.
I have written a procedure in C# and deployed it on SQL Server. However when i try to run it i get the following error.
System.Data.SqlClient.SqlException: The locale identifier (LCID) 16393 is not supported by SQL Server
Also I tried using same procedure in Windows XP machine and it workd fine. Can anyone help me what could be the problem?

Hi Jonathan
I tried posting the error box here but it is not allowing me.
Here is the error coming up:
A .NET framework error occured during execution of user-defined routine or aggregate.
System.Data.SqlClient.Sqlexception:The locale identifier (LCID)1153 is not supported by SQL Server.
System.Data.SqlClient.Sqlexception:atSystem.Data.SqlClient.SqlConnection.OnError(SqlExceptionexception, Boolean breakConnection) atSystem.Data.SqlClient.SqlInternalConnection.OnError(SqlExceptionexception, BoleanbreakConnection) atSystem.data.SqlCleitn.SqlInternalConnectionSmi.EventSink.ProcessMessagesandThrow(Boolean ignoreNonFatalMessages) atMicrosoft.SqlServer.Server.SmiEventSink_Default.ProcessMessagesandThrow(Boolean ignoreNonFatalMessages) atSystem.Data.SqlClient.SqlCommand.RunExecuteNonQuerySmi.(BooleansendTo Pipe) atSystem.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResultresult,StringmethodName,BooleansendToPipe)
atSystem.Data.SqlClient.SqlCommand.ExecuteNonQuery()
I hope this will shed some light.
Cheers

Local language site does not support with the font. I alredy installed the font in my computer. IE support with it but FF 5.0 not support?

I visited a local site which published in local language(Sinhala language) The site provides the font to be installed to visit the site. I installed that font and tried to visit the site, but can't read as font not supported. restart also not solved. With IE it support and Firefox 5.0 not.

I visited a local site which published in local language(Sinhala language) The site provides the font to be installed to visit the site. I installed that font and tried to visit the site, but can't read as font not supported. restart also not solved. With IE it support and Firefox 5.0 not.

Indonesian (id) locale is not supported by ADF ?

I have 2 resources file : UIResources.properties and UIResources_id.properties
I have configured my browser using Indonesian (id).
I have configured <supported-locale>id</supported-locale> in faces-config.
Launch browser, but always show my default English (en) locale.
Change the resource file from UIResources_id.properties to UIResources_de.properties.
Configure <supported-locale>de</supported-locale> in faces-config.
Configure browser to use German instead Indonesian.
Launch browser, successfully use the UIResources_de.properties file.
how to use Indonesian (id) locale ?
Thanks,
Ricky

Hi Frank,
I have change this to faces-config.xml file:
<application>
<default-render-kit-id>oracle.adf.core</default-render-kit-id>
<message-bundle>com.putra.pos.view.resources.UIResources</message-bundle>
<locale-config>
<default-locale>id</default-locale>
<supported-locale>en</supported-locale>
</locale-config>
</application>
But the application still use UIResources.properties. Where is jsf-config file ? i'm using ADF Faces and Toplink.
Thanks,
Ricky

Locale not supported

Similar Messages

Maybe you are looking for