Locale Packages in Solaris 10 For SAP

Hi,
Can anyone tell me the Locale Packages that I have to install on Solaris-10 for SAP installtion i.e for German & en_US lang...??
Regards...Raj Lalit

If you want use [url ftp://ftp.sunfreeware.com/pub/freeware/SOURCES/make_package]make_package PERL script for create your package or see [url http://www.sunfreeware.com/pkgadd.html] sunfreeware link
Michele,
I followed the above instruction and was able to create the package, but can't do pkgtrans - s '/tmp/pkgname'. See what I get. Any iddea?
bash-3.00# pkgtrans -s 'pwd' /tmp/oracpu
pkgtrans: ERROR: unable to complete package transfer
- unable to obtain package volume

Similar Messages

Oracle DB 11g Release 2 Installation in Solaris OS for SAP - issue: Files not found

Hello All,
Having problem during my installation of oracle DB.
the installer keeps on prompting that files not found and the directories and files permission seems different from expected
I attached the images of the files the installer is looking for and also the /oracle/<SID>/11ginstall_11202.log
I also attached the thing i put in ENV command
Not sure if its the issue in the oracle profile or installer itself or wrong input
please help

Hi Frogoso,
Please have a check on the known issues SAP note for Oracle installation.
Section G: is related to Solaris
1431796 - Oracle 11.2.0: Troubleshooting the Software Installation
You may re-check whether all the Solaris related pre-requisites are met before executin RUNINSTALLER.
Suggestion here would be to go with latest available Oracle patch 11.2.0.4 as you are installing a new system.
Hope this helps.
Regards,
Deepak Kori

SUNWsprox package with solaris 10 for Oracle 10g Installation....

Hi
I am in problem with a Solaris 10 package "SUNWsprox - Sun workshop Bundled 64-bit make library" for Oracle 10g Installation. I checked the CDs (In the /.../products) but did't found this packege. Can any one tell me please can I go without this package or where I found this package...Please Its very URGENT for me....
Thanks
Mohammed Tanvir

Hi...
I had the same issue, but found out that the SUNWsprox was replaced by SUNWsprot. The OUI 10.1 Release 2 will 'pass' as the doco in the Oracle quick install guide is wrong (as well as 10g Application Server).
The only way to lay a 10g Release database on Solaris 10 is to lay the software doen only, then cd in the .../bin directory, step your Rdbms ORACLE_HOME, ORACLE_SID, LD_LIBRARY_PATH and of course the DISPLAY (is X-windowing into the server), and run dbca manually. Oracle 10g is a bit buggy.
Roger

SAP Enhancement Package 3 or 4 for SAP ERP 6.0

Hi Experts,
Could you please let me know some details about EHP4. And SD point of view what are the advantages for using EHP4 rather than using ECC 6.0 version. Please provide me the functional advantages while working on EHP4.
Thanks and regards.........Divakaran.....

Hi,
i have some informatio regarding redwood software. Please go through this link:
[http://en.wikipedia.org/wiki/Redwood_Software]
[http://www.redwood.com/solutions/business/job-scheduling-ref/]
Hope it will useful.
thanks
hemant

Solaris Cluter 3.2 for SAP

Hello All,
My SAP production environment needs to be running under Solaris Cluster 3.2. I am thinking of T5440 servers - 2 in number and StorageTek 6140. The agents available for SAP on Solaris Cluster 3.2 are:
Sun Cluster HA for SAP (failover or scalable).
Sun Cluster HA for SAP LiveCache (failover).
Sun Cluster HA for SAP Web Application Server (failover or scalable).
Sun Cluster HA for SAP DB (failover)
The ERP 6.0, EP 7.0, BI7.0 and Oracle HA DB needs to failover from one node to another.
My question is: What agents do I need to purchase for failing over the above the applications beside Sun Cluster HA for Oracle.
SAP vendor is asking me to provide three logical host names. The idea of Solaris 10 zones came into my mind.
Zones can be implemented with Sun Cluster 3.2 software in the global zone. That is, Sun Cluster 3.2 with zones enabled will be treated like physical nodes to be part of Sun Cluster Resource Groups. I feel it is best for those applications which are supported with containers and have a Sun Cluster agent but don't have the requirement of the zone itself failing over in case of a failure.
Any suggestions will be helpful.
Best Regards,
Bruce

You might be interested to read the following Solaris Cluster for SAP Configuration Guide:
[http://www.sun.com/third-party/global/sap/collateral/SAP-Cluster-Config-final.pdf|http://www.sun.com/third-party/global/sap/collateral/SAP-Cluster-Config-final.pdf]
Regards
Thorsten

Business Package for SAP Best Practices for Enterprise Portal

Hi,
We are implementing EP for ECC 5.0 and we have to web enable some FI transactions like FB50/fb60 etc. We want to use standard business package for this. The only business package that caters this requirement is "Business Package for SAP Best Practices for Enterprise Portal 60.1". When i checked the data source for this business package, the specification is for "SAP R/3 4.6B and above". Does this work for ECC 5.0 as well? In general does the R/3 specific business packages work for ECC versions? Please let me know. Thanks for the help. I promise rewards.
Regards
Hari

Hari,
When you download the BPO via Portal Content Portfolio,
each bpo has additional information on the release.
For example for the one you are inquiring about - Business Package for SAP Best Practices for Enterprise Portal, the additional release information is provided on the following links;
https://www2.iviewstudio.com/sdn/info/index.cfm?action=faqs&part=#QSR03
https://www2.iviewstudio.com/sdn/detail_view/index.cfm?action=package_information&CatalogSet=SAP%20Content&ItemID=17212&CFID=7544845&CFTOKEN=99283970
Regards,
James

BO Install Components for SAP

Dear Friends,
We have SAP BI 70 up and running. Our new requirement is to install BO compoenets and link it back to SAP.
Could you please help with the following:
> What are the componenets are needed for to install BO? Are the following good enough, or I have listed too many, or few components are missing?
      - BusinessObjects Enterprise XI 3.0 - WIN - INTL,
      - Crystal Reports
      - Xcelsius
      - Profitability and Cost Management
      - Financial Consolidation
      - Designer
      - Desktop intelligence
      - Query as web service
      - Query Builder
      - Universe Builder
      - Web Intelligence rich client
> Are the above compoenets need to be installed seperatly or one main installation will give us all of the above componenets?
> Can we download the software from SAP Marketplace or we have to download it from Business Object official site?
> Do BO installation need any database installation as well? Our's is Windows 2003 environment
Thank you,
Nikee

Hello Allan,
Thank you for the response. We have purchased BOE Premium licenses.
Few more quick questions....
> Can we install these components on WINDOWS 2003 64-bit OS or we have to install few componets (like Microsoft IIS) on 32-bit and few components on 64-bit?
> What are the components do we need from SQL point-of-view?
                   - SQL SERVER 2005 Enterprise Edition
                   - Analysys Server (OLAP)
                   - Reporting Services
> Please let me know the sequence of the installation components?
                   - SQL DB Install
                   - BusinessObjects Enterprise XI 3.0
                   - BO Sap Integration Key XI 3.0
                   - Crystal Reports
                   - Xcelsius
                   - Client Tools
> We have the following links on SAP MarketPlace...I don't see a link to download the BusinessObjects Enterprise XI 3.0, Crystal Reports, Xcelsius, Client Tools and so on...
BusinessObjects packages and products
      Ad-hoc Querying package
            BOBJ INTGR. FOR SAP XI 3.0
      Enterprise Query, Reporting, and Analysis package
            BOBJ INTGR. FOR SAP XI 3.0
      Financial Performance Management package
           BOBJ INTGR. FOR SAP XI R2
           BOBJ INTGR. FOR SAP XI 3.0
     BOBJ EDGE INTEG. FOR SAP SOL.
     BOBJ INTGR.FOR SAP
Thank you,
Nikee

(SBOP EDGE INTEG. FOR SAP SOL ) vs. ( SBOP INTGR. FOR SAP)

We have Edge Series Server Licence and I am not able to figure out the difference between two above components available for download. Any insights would be truly helpful.Thanks,Mahesh

Question 1-)
But i can`t find BOBJ Live Office XI 3.1 CD !! Where`s it ?
A: you can check with SAP, I hope you have purchased it.
Question 2-)
On the server side I just have to install the following CDs right ?
SBOP EDGE BI 3.1 SP3 STANDARD PACKAGE 51040529
SBOP INTEGRATION FOR SAP SOLUTIONS XI 3.1 SP3 WINDOWS (32B) 51038935
Or do i need to install SBOP INTEGRATION FOR SAP SOLUTIONS XI 3.1 SP3 WINDOWS (32B) 51038935
on Client side ?
A: SBOP INTEGRATION FOR SAP SOLUTIONS XI 3.1 SP3 WINDOWS has to be installed on the server. For client side, do custom install and select only client components.
Question 3-)
In CD SBOP INTEGRATION FOR SAP SOLUTIONS XI 3.1 SP3 WINDOWS (32B) there is some folder called Transports
I need to import some request to my ERP system.
But i have a doubt about files 92 to 95.
They said "The following files must be used on an SAP BW system: "
They are talking about my ERP system right ?
A: Yes, the transports has to be imported to SAP system. What is the ERP you are using.

What package for SAP object PROG MMCHPLAN

Hi,
When I implement note 99569 using SNOTE, I cannot save it to package Z001 which used for all notes applied before.
I got the message below:
SAP object PROG MMCHPLAN cannot be assigned to package Z001
Message no. TO142
Diagnosis
Object PROG MMCHPLAN is in the name range reserved for SAP. The object cannot be assigned to package Z001, since it belongs to a different name range or namespace.
System Response
Editing is terminated.
Procedure
Assign the object to an SAP package whose name begins with A-S or U-X.
If you want to create the object as a test object, you can also assign it to a local package (1st character = $) or a test package (1st character = T).
Does any expert know what package shall I choose for it?
Thanks
Fuyi

Hi Chen ,
try to download corrections from service.sap.com , i think they have given external transport requests.
regards
prabhu

Changing locale to en_US.ISO8859-1 on Solaris/Linux running SAP

My query is for SAP Web AS 7.0 J2EE system on Solaris/Linux. Default locale setting at Solaris/Linux is UTF-8. If I change the locale setting to en_US.ISO8859-1, will the SAP system and its components functionality be affected? Or will it continue to work as with UTF-8?

when the localeadm command is run for the first time, it will try to create a config file. This config file contains a list of locales and their locations in Solaris CDs/DVD.
Here is a sample of its content:
#                 Solaris 10, Northern America partial locales
# ( en_CA, en_CA.ISO8859-1, en_US, en_US.ISO8859-1, en_US.ISO8859-15,
# en_US.ISO8859-15, fr_CA, fr_CA.ISO8859-1 )
locname N_America nam en_CA en_US es_MX fr_CA en_US.UTF-8 es fr
SUNW5ttf        nam     solaris1
SUNWale nam     solaris1
SUNWaled        nam     solaris5
SUNWcttf        nam     solaris1
SUNWebrg        nam     langcd1
SUNWedcl        nam     langcd1
SUNWedhcm       nam     langcd1
SUNWefdl        nam     langcd1
SUNWeladm       nam     langcd1
SUNWelvma       nam     langcd1
SUNWelvmg       nam     langcd1
SUNWemcon       nam     langcd1
...You can run localeadm -C (Uppercase C) to create the config file. Just follow the instruction. If you are installing it from CD, solaris1 means Solaris 10 CD1, solaris2 means Solaris 10 CD2, and so on.
Once the config file has been created, then you execute the command you entered previously localeadm -a en_US.UTF-8 -d /cdrom/cdrom0. en_US.UTF-8 is part of North America region and Solaris 10 installs all locales under nam (North America).
Verify your installation by locale -a. It should return en_US.UTF-8 in the list.
Hope this helps.
BTW, the config file (Locale_config_S10.txt) is located under /usr/sadm/lib/localeadm/
Edited by: luctorEtEmergo on Jun 25, 2008 8:33 PM

Release BI 7.0 front-end add-on for SAP GUI 7.10, Support Package 700

Hi guys,
In SAP note 1238872 the release of new support package has been mentioned (Quote: "Download the BI 7.0 front-end add-on for SAP GUI 7.10, Support Package 700 from the SAP Service Marketplace.")
So, can someone tell me, when this Support Package will be released?
(At the moment the last version provided in download area is 6.02)
Kind regards
Markus

Thanks, but my question was not how can I workaround, cause I was able to read that note. (Unfortunatly the workaround solves the problem for the query designer only and the error still persists when executing the query)
However, can some one please tell me, when the Support Package 7.00 will be released?

Screen 910 getting saved in Local object - not even asking for Package

Hi ABAPers,
I am using Enhancement CONFPP07 and for this created Z project in CMOD.
When I am creating the screen 910 for the screen exit SAPLCORU_S of that Z Project, that 910 is getting created in Local object not even asking for the Package and the request.
I tried to create that screen from the SE80 in the function group XCOF, there also it is getting saved in local object.
I tried to do it from SE51 also, but arrived that screen in the local object only.
Please Suggest me with your valuable comments.
Thanks and Regards
Pinaki Mukherjee

Do a version management on the screen and see if it was ever created before and then deleted. If so, reassign it to the package you want.
Rob

How to import Support Package 13(SAPKW70013) for SAP NetWeaver 2004s BI

Hi,
How to import Support Package 13 for SAP NetWeaver 2004s BI (BI Patch 13 or SAPKW70013)
Note no for that is : 1019055.
Thanks in Adavance,
Dushyant.

Hi,
RTC for BI 7.0 SAP_BW SP 13 is scheduled in CW 21, that is coming week, after that you should be able to download it from service market place.
@others: Dont get confused about SPS release with SP release. BI has intermediate release which is SP release, SPS is SP-Stack release (which is NetWeaver release).
SP 12 correspond to SPS 12 which is sceduled CW 21.
Hope this helps.
Best Regards,
Rajani

BOE 3.1 SR3 on Solaris SPARC - how to for Int kit for SAP Solutions ?

Hi,
this is my first BOE installation and I've just installed the BOE SR3 Enterprise Server on Solaris SPARC with SAP WAS 7.0 and Oracle 11.2.0.2 providing the CMS database location and the Java application server for the BOE applications.
The installation went ok and all BOE Server services are running. I've now got to install the XI 3.1 SR3 BOBJ Integration for SAP Solutions kit and have read the installation and administration guide for this.
The pre-requisites state that the SAP RFC & Java Connector needs to be put in place before deploying. Are these not part of the NW 7 WAS 7.0 Java Server anyway ?
If anyone has any pointers to more detailed instructions for doing Integration for SAP solutions kit other than the guide then please let me know.
Regards,
Brian.

Hello Ingo,
many thanks for your reply, although I'm still confused. My Business Objects 3.1 Enterprise Server runs on the same host as a NW 7 WAS and has it's applications deployed and running on the NW 7 WAS Java instance .According to OSS 549268 you should not use the standalone SAP JCO connector if your applications are running on a SAP WAS - it has it's own integrated SAP Java Connector
"SAP JCo is available for two different environments: there is the standalone version and the version integrated in the SAP J2EE Engine. These two JCo variants have a compatible API but are implemented differently, so you may not mix them together within one environment.
SAP JCo 2.1 is the standalone version and can be used in all Java applications not running in an SAP J2EE Engine environment.
So it seems I don't need to use the standalone Java connector ?
Regards,
Brian.

OpenSSH 4.4p1 packages with PAM support for Solaris 9, 10

As mentioned in a previous post* , I've compiled OpenSSH packages with PAM support for Solaris 9 and 10. They've since been updated to version 4.4p1, and are compiled against a static zlib (1.2.3) and OpenSSL (0.9.8c). You can find them here:
http://firewallworks.com/downloads/unsupported/Solaris-sparc/
Regards,
Greg
* http://forum.sun.com/jive/thread.jspa?threadID=103378&tstart=105

Yes, zlib 1.2.3 is a requirement. In facts, zlib mentions a 2005 vulnerability fix but I found no matching patch in sunsolve. See
http://www.kb.cert.org/vuls/id/JGEI-6E7RC3
I have been wandering whether to replace the official zlib. Linking statically is probably a better idea. Thanks

Locale Packages in Solaris 10 For SAP

Similar Messages

Maybe you are looking for