Localhost:8080 for Tomcat causes Cycle Error
I want to maintain a TomCat installation that is located at http://localhost:8080
Everytime I go to it, I get the error:
Cycle Detected
Description: Your request is prohibited because it would cause a cycle.
what gives with this ? Yes, I upgraded to FF 4 and so far its a pain.
What the HELL happened to the status bar at the bottom of the page??!!
Apparently the problem was caused by incompatibility between jdk1.2.2 and Tomcat4 as discussed in another topic on this forum.
When I switched to a Tomcat3 version, everything worked fine.
Similar Messages
-
Revision: 11999
Revision: 11999
Author: [email protected]
Date: 2009-11-19 11:37:09 -0800 (Thu, 19 Nov 2009)
Log Message:
Fixed: ASC-3889 - Using setting in a for loop causes Verify error
Notes: emit pop after callstatic to a void function to balance the stack.
Reviewer: jodyer+
Testing: asc,tamarin,flex checkin tests
Ticket Links:
http://bugs.adobe.com/jira/browse/ASC-3889
Modified Paths:
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/semantics/CodeGenerator.javaBlacklisting the ahci module does indeed get rid of the error. Would be nice to figure out why it was conflicting with the ahci module though.
I have not yet tried the 173xx drivers, but the latest drivers for the Quadro FX 580 are the 256.53 drivers according to nvidia.
Posted at the nV forums (http://www.nvnews.net/vbulletin/showthread.php?t=155282), so we'll see what they suggest. -
Revision: 11530
Author: [email protected]
Date: 2009-11-06 13:23:05 -0800 (Fri, 06 Nov 2009)
Log Message:
Fix ASC-3790 (conditional expression in for loop causes verifier error) r=jodyer
Ticket Links:
http://bugs.adobe.com/jira/browse/ASC-3790
Modified Paths:
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/parser/ConditionalExpressionNode.java -
DNS error for localhost:8080 with Tomcat
jdk1.2.2 is up and running and then I installed Tomcat on my Windows2000 PC.
Then in a DOS window I did this:
C:\Program Files\Apache Group\Tomcat 4.1\bin>startup
And this display resulted:
Using CATALINA_BASE: C:\Program Files\Apache Group\Tomcat 4.1\
Using CATALINA_HOME: C:\Program Files\Apache Group\Tomcat 4.1\
Using CATALINA_TMPDIR: C:\Program Files\Apache Group\Tomcat 4.1\\temp
Using JAVA_HOME: C:\jdk1.2.2
But I get "Cannot find server or DNS error" when I try
http://localhost:8080/ or http://127.0.0.1:8080/admin
Any suggestions would be appreciated.
Thanks!Apparently the problem was caused by incompatibility between jdk1.2.2 and Tomcat4 as discussed in another topic on this forum.
When I switched to a Tomcat3 version, everything worked fine. -
I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
gave same error. I browsed msdn blog. But nothing help me out.
Below is the error log details--
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2013-10-21 12:58:05
End time: 2013-10-21 13:52:30
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: CROY-TOSH
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AI
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: CRoy-TOSH\CRoy
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: ROY
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: CRoy-TOSH\CRoy
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: CRoy-TOSH\CRoy
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htmHi,
This 3rd time I followed this link. But nothing new, same error.
Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
Server Configuration Manager(Local)
From here I folllowed the steps ---[I cannt insert link/image :-(]
SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed"
If I right clicked on SQL Server Service, there is no option to change the account.
Hello,
Thanks for your patience,did you tried stesp mentioned in below article
http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
To resolve it, follow these steps:-
When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
been created. Check the Services console.
If the service is present, perform the following steps:-
1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
Use this link to change sql server service account
http://technet.microsoft.com/en-us/library/ms345578.aspx
2. Next, try to start the service. It should come online.
3. However, you will not be able to log in to the SQL Server
4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
Also add the builtin/administrators to the sysadmin role
7. Now stop the service from the command prompt and start it from SQL Server configuration manager
You should be able to log in to the server now.
Hope this helps someone.
Please revert if it helps or even if it does not
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Tomcat in JWSDP - localhost:8080 doesnt work!
Hi there,
I am using tomcat 4.0 that comes with the Java Web Services Development Pack and I'm having a bit of a nightmare time with this.
Basically when I goto http://localhost:8080/index.html, I get an error. When I use http://127.0.0.1:8080/ it goes to the index page, which is all well and good.
After some research I located the "hosts.sam" file and "hosts" files and have made sure they contain the correct info and are in the right pace (i.e. C:\windows for win98). But still tomcat refuses to co-operate. Does anyone have any ideas about how to deal with this, esp given that its in the JWSDP.
Many thanks
JSHi, raj cmu. I have ie 5.0 but I checked the 6.0 version on the pc of a collegue and I found the identical option "use automatic configuration script". I recap what you have to do to find it: when you are on the internet go to Tools - Internet Options - connections - LAN settings. There you should find that option. Hope I could help you. Let me know.
-
Photoshop CS4 for Mac What can cause the error: Plug-in failed to load - NO VERSION
With Photoshop CS4 for Mac I install the Kodak Plug-in DIGITAL GEM Airbrush Professional v2.1.0. When Photoshop starts I get an error:
Plug-ins that failed to load:
DIGITAL GEM Airbrush Professional v2.1.0 NO VERSION - - from the file “DigitalAIRProv2.plugin”Flash:
Connections
Kuler
This plug-in works fine on my Mac Pro with Photoshop CS4 and OS 10.6 but fails on a new Macbook Air.
Reinstalling the plug-in did not make any difference. What can cause this error?Thanks Chris, That was my first thought too but this same plug-in works on another installation of CS4. This is a Mac installation and the plug-in is Universal so it should work. Is there any other possible cause for this error? Would Photoshop refuse to load a plug-in in a low memory situation?
Also, The Flash extensions:Connections and Kuler are working OK, I just copied a little more out of the System Info report than I needed to. -
Pl find out the reason for VC Cycle error for vendor 105191
I had checked entire cycle of Valuation Class(MM42), Tax Code(ME12), validity period, MC Code
in the contract as per the proforma invoice 12738 for vendor 105191 - VC Parties, found ok.
Pl find out the reason for VC Cycle error for vendor 105191
" Unable to create consignment commision - FI/CO"
" Interface : inconsistent FI/CO line item data"I've used the CS6 AUTOMATE|PHOTOMERGE command many times. Today I ended up with the Error 22 message. After reading your message I did a search on my Win7 Pro 64 bit machine and got a number of hits for "scriptingsupport.8li".
1 for CS6 (on my machine)
2 for CS5 (no longer on my machine)
2 for Elements 8 (no longer on my machine but I DO have Elements 10 & 11 on it)
2 for CS# (no longer on my machine)
QUESTION: Should I delete some of these and which? Will deletion(s) suffice? -
When I installed Rollup 8 for Exchange 2010 SP2 it caused an error in EWS
EWS failed with the error:
exchange web service could not load file or assembly Exchange.MailboxReplicationService.ProxyService bad parameter
When I uninstalled the rollup all worked fine again.
Any ideas, Thanks in advance?Hi,
To apply this update rollup, you must have Exchange Server 2010 SP2 installed. And remove all interim updates for Exchange Server 2010 SP2 before you apply this update rollup. Please check your installation deployment by the following article:
Install the Latest Update Rollup for Exchange 2010
http://technet.microsoft.com/en-us/library/ff637981.aspx
Description of Update Rollup 8 for Exchange Server 2010 Service Pack 2
http://support.microsoft.com/kb/2903903/en-us
If all requirements and preparations are configured properly, please collect your error logs to check your installation. It would be helpful to post some event logs here for further analysis.
Thanks,
Winnie Liang
TechNet Community Support -
Jboss/tomcat mapping configuration error
I can't even get the combination to serve a .jsp file or .html file. Regardless of the URL that I attempt, I only get a No Context configured to process this request error from tomcat and INFO [Engine] StandardHost[localhost]: MAPPING configuration error for request URI from JBoss. I've tried to access all of the various webapps under the catalina directory and can't get to any of them. I know that catalina is started because the log file shows
<Service name="JBoss-Tomcat">
<Engine name="MainEngine" defaultHost="localhost">
<Logger className="org.jboss.web.catalina.Log4jLogger" verbosityLevel="trace" category="org.jboss.web.localhost.Engine" />
<Host name="localhost">
<Valve className="org.apache.catalina.valves.AccessLogValve" prefix="localhost_access" suffix=".log" pattern="common" directory="../server/default/log" />
<DefaultContext cookies="true" crossContext="true" override="true" />
</Host>
</Engine>
<!-- A HTTP Connector on port 8080 -->
<Connector className="org.apache.catalina.connector.http.HttpConnector" port="8080" minProcessors="3" maxProcessors="10" enableLookups="true" acceptCount="10" debug="0" connectionTimeout="60000" />
</Service>
</Server> in jboss.web:service=EmbeddedCatalinaSX
2002-06-12 23:29:44,760 INFO [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Creating
2002-06-12 23:29:44,760 INFO [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Created
2002-06-12 23:29:44,760 DEBUG [org.jboss.deployment.MainDeployer] Done with create step of deploying tomcat4-service.xml
2002-06-12 23:29:44,760 DEBUG [org.jboss.deployment.MainDeployer] start step for deployment file:/D:/JBoss3.0/jboss-3.0.0_tomcat-4.0.3/server/default/deploy/tomcat4-service.xml
2002-06-12 23:29:44,760 DEBUG [org.jboss.deployment.SARDeployer] Deploying SAR, start step: url file:/D:/JBoss3.0/jboss-3.0.0_tomcat-4.0.3/server/default/deploy/tomcat4-service.xml
2002-06-12 23:29:44,760 INFO [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Starting
2002-06-12 23:29:44,760 INFO [org.jboss.deployment.MainDeployer] Adding deployer: org.jboss.web.catalina.EmbeddedCatalinaServiceSX@7dadcd
2002-06-12 23:29:44,760 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Setting catalina debug level to: 0
2002-06-12 23:29:44,760 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Setting catalina.home to: ../catalina
2002-06-12 23:29:44,760 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Setting catalina.base to: ../catalina
with no errors. I'm confused because I was able to consistently work with previous versions of JBoss with no problem. The configuration seems to have changed radically, is this some recent change that I just can't find a reference to? Thanks for any help.Hi
For Tomcat 3.x you need to use one of the following options:
(Note: this is with JBoss/Tomcat OR JBoss/Jetty)
Place you .war files in the following location:
C:\jboss-3.0.3\server\default\deploy and the app is automatically available.
If my app's name is DavidOnline.war, when deployed, I can access it at
http://localhost:8080/DavidOnline..
OR
Copy your entire development directory to the deploy direction above, RENAME your
directory from say C:\JspApps to C:\JspApps.war and you can work from that location and see your changes immeadiatly.
There is a file called jboss-service.xml that has some config options, also for the Tomcat bundle there is a file named tomcat-service.xml that has the standard server.xml section.. I suggest you check out the JBoss website, free docs and forums.. http://www.jboss.org.
Thanks, Hope this helps. -
Hello
I want Tomcat to use another document root (where index.html typically resides in). I set
<Host name="localhost" debug="0" appBase="" docBase="d:\WWW" unpackWARs="true">
but I got error
MAPPING configuration error for request URI
Unfortunately, I can't track down the problem, even some articles in this newsgroup explain something like this.
I took care of capitalizing letters.
Thank you for your aid.Hi,
use:
<Host name="localhost" debug="0" appBase="d:\www" unpackWARs="true">
or:
<Context path="" docBase="d:\www" debug="0"/>
I think the first edit the default directory for all webapps. The second edit the root-doc only for the uri-path "", thats means for "http://localhost:8080" e.g.
Good Luck
Kuno -
I cant access to database_homepage in localhost:8080. This requests user ps
Hi, Ive a problem at the moment of open the database_homepage, the explorer says "The server localhost:8080 requires a username and password. Server Message: XDB." Ive Oracle Express Edition v11g release 2, but above I had Oracle Enterprise Edition, however before of install the XE I uninstall The full Edition.
I installed this on Windows.
The error is:
https://www.dropbox.com/s/ie32ez1p1aiir2x/issue.bmp
Help me please.
Thank you.Try:
http://127.0.0.1:8080/apex
(exchange 8080 for actual port number from your installation)
If that fails, post output from :
lsnrctl stat
Edited by: orafad on Sep 4, 2012 4:00 AM -
Unable to cycle error log due to lock that will not clear
Hello,
Currently I'm having an issue with cycling the error log on two SQL Server Instances because the file is being used by another process. Simple I know but, when you try to kill the SPID it becomes hung and we are forced to restart the instance, which I want
to avoid at all costs. To give you some background we use sqldm for our monitoring of the databases and received a message that our Error log reached its max size threshold and to cycle the error log. When I executed exec sp_cycle_errorlog I'm told the following
message:
Msg 17049, Level 16, State 1, Procedure sp_cycle_errorlog, Line 9
Unable to cycle error log file from 'J:\MSSQL10.SQL6\MSSQL\Log\ERRORLOG.1' to 'J:\MSSQL10.SQL6\MSSQL\Log\ERRORLOG.2' due to OS error '32(The process cannot access the file because it is being used by another process.)'. A process outside of SQL Server may be
preventing SQL Server from reading the files. As a result, errorlog entries may be lost and it may not be possible to view some SQL Server errorlogs. Make sure no other processes have locked the file with write-only access."
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
Then I ran the following query in instance A and found that sqldm had a active process.
SELECT *
FROM sys.dm_exec_requests a
OUTER APPLY sys.dm_exec_sql_text(a.sql_handle) b
WHERE session_id > 50
and session_id <> @@spid AND( text = 'xp_readerrorlog' OR text = 'sp_cycle_errorlog')
ORDER BY start_time a
Like I said before when I kill the SPID it became hung and remains in a rollback state (the process is not rolling back). My co-worker had this issue before on this same instance and contacted Idera for support, here was their response "The development
team provided an update regarding this case. After reviewing the code, SQLdm only reads the SQL logs information in each collection and does not lock this resource. Given the behavior that you described, this could be a problem of SQL Server 2008"
I believe they're right because we're only seeing this in these two instances. All other instances using sqldm are not reporting this problem which leads me to believe it is MS SQL Server causing it. This is where I'm stuck and that is trying to find out why
there is a lock on this file and for what reason. I used Process explorer yesterday to search for any processes that are using ERRORLOG through the Find DLL and Handle window and there were mulitple processes touching this file. When I looked today I'm seeing
now locks for this file and I still cannot cycle the error log. I ran the slect query above I'm still seeing sqldm SPID in both instances. I'm curious to see if anyone else has had this issue before whether they used sqldm or not. Any information will be helpful
in tracking this issue down.
Thank you in advance.
Process Explorer Search Results
Instance A
Instance BHi,
Generally, I use Process Explorer to find out which process is blocking the SQL Server from cycling the error log file. Open search box for ‘errorlog’ or dentify the entries with Handle or DLL as ‘your error log path’. There could be two
or more processes relating to that. One of them should be ‘sqlservr.exe’, and the others should be the culprits. Verify the process, and try to terminate it and then you should be able to run the stored procedure ‘sp_cycle_errorlog’ to cycle the
error log without restarting the SQL Server.
According to the images, there is no process found. I suggest you start the monitor and launch procexp.exe tool again and see if it makes any difference this time. If still no progress, I think you cannot avoid restating.
Thanks.
Tracy Cai
TechNet Community Support -
Localhost:8080 redirects to localhost.ie:8080
Hi All,
I am interested in learning more about webservices and have just install Sun Java System Application Server 8.
After starting the server, I needed to see if the server and installation went ok. This is done by typing :
http:localhost:8080 into the browser (internet explorer 6)
HOWEVER when I do this I get redirected to localhost.ie:8080 which yields an error as it can't find localhost.ie.
it only works if I use http:\\127.0.0.1:8080.
where is it getting the "localhost.ie" part from. I cannot seem to find the configuration file to edit it and replace localhost.ie with localhost.
can anyone help me here.
kind regards,
Will.You probably just need to update your hosts file to include an entry for localhost
-
Custom Login Module for Tomcat to procted apps using Oracle Access Manager
Hi all,
I have the following scenario.
A web application deployed in Tomcat to be protected using OAM. One solution is to use Access Gate though we have other alternative as Proxy infront of Tomcat with a webgate. Now I am implementing the Access Gate solution.
So, when the user clicks the tomcat application, then the prompt (BASIC) appears for login details. custom login module should kick in and take those login details and authenticate against OAM using Access SDK API.
I have created access gate profile and installed Access SDK. Ran the ConfigureAccessGateTool as well.
I did some research googling for login module. I came to know that we need to write a custom realm for it. So, this realm implementation involves specifying role-name etc., in web.xml where the role-name would have been defined in tomcat-users.xml.
This means that the user trying to authenticate against OAM has to have some roles defined in Tomcat to login. I didnot understand the flow end to end as how this will work.
Please let me know if anybody has done this of customization.
Thanks,
Mahendra.Hi Ambarish,
Initially I thought of implementing the way you suggested in Option 2.
But there will be various redirections when we use option 2 as the login page should redirect it to a page where OAM authentication and authorization stuff has to be handled. And accordingly we have to redirect it to specific pages upon successful atn and atz. Hence, I was opted using Custom Login Module.
However, I have been trying Option 2 now. In web.xml, I have specified a login page with FORM scheme. The login redirects it to another page say OAM_Authentication_Handler.jsp. Here we code which serves atn and atz. Upon doing this, I have observed that the protected resource in OAM is not getting evaluated using the method
String ms_protocol = "http";
String ms_method = "GET";
String ms_resource = "http://localhost:8080/FormLogin/private.jsp";
ObResourceRequest rrq = new ObResourceRequest(ms_protocol, ms_resource, ms_method);
The method rrq.isProtected() is returning false which implies it to unprotected. I have tested using Access Tester for the resource and it results in expected behaviour.
Is there any limitation here by using this approach?
Any ideas?
Thanks,
Mahendra.
Maybe you are looking for
-
ABAP: How can I create screen like COOIS parameter
Dear ABAP Experrts, How can I create same paremeter screen like COOIS. E,g in production order parameter screen there are many options but when I create a parameter in ABAP program SELECT-OPTIONS: SO_AUFNR FOR AFKO-AUFNR, only one column is displaye
-
How to Get and Update properties values from XML tag Using Xquery or PL Sql
Hi I have this tag <Solicitud Pais = "1"> How i can get Pais value? How i can update Pais Value? Y can use Xquery funtions or PL SQL for this? Thak's Angel
-
Hi, can anyone give me some best practices on how to model many to many relations between entity object. Of cource I have to build an association table in the database, but I don't like to have the mapped to my object model. I tried to create a m:n a
-
Bea content repository bug (?)
Hi All, I've encountered a problem working with the Bea weblogic content repository. I've tried to create a new property for a content type wich has already some contents associated. The results is that if i try to set the new proprery value, for a c
-
How do you remove link box around images?
I have put a link on a firework image that I created. When I put the files up it looks fine on my computer but a blue box keeps showing up on older computers. It is a bright blue color and looks very weird. Is there a way to have a link on the image