Localhost not working
When I try to access localhost using Chrome (or Firefox, Safari, etc...) I get the below response:
Oops! Google Chrome could not connect to 127.0.0.1
I have confirmed my apache server is running. I have checked blogs, forums and other sites and still don't have a solution that works. I've accessed it via nano through Terminal and added 127.0.0.1 localhost, but it either says no such directory exists or brings me to the finder window, prompting me to open a file (which obviously can't be found).
I have OSX 10.8.2. I'm trying to learn PHP and MySQL but I'm struggling with my first class because I can't get through these basic setups on my Mac.
Used those already to try and get it fixed, still not working. Is there something really simple that matters? I did have to add the username.conf file as it wasn't present, including the code (obviously with username replaced).
<Directory /Users/username/Sites/>
Options Indexes MultiViews
AllowOverride All
Order allow,deny
Allow from all
</Directory/>
I also had to add the index.html file (with Hello World text), as it was missing as well. Is there some other file that is assumed to be present that might be missing?
Similar Messages
-
Localhost not working with firefox 7. How do I get it to work with wampserver
used to be able to access localhost via wampserver but firefox 7 just shows a blank page??? I looked at control panel->internet properties but local host is set as exception. Running XP Pro OS.
Chrome 14 works fine with localhost but not firefox 7. I have tried the suggestions I found about:config change a few settings but nothing worked (fixup filter, browser filter). Firefox is showing correct url - not adding a www prefix - but still getting blank page???drum160 wrote:
I have done the edits with /usr/sbin/lpadmin -o command and they show up in the Printers.conf file. I made sure cupsd was not running at the time. However the macbook keeps right on sending out print jobs.
Your statements don't seem to go together. To the best of my knowledge `lpadmin` will not run as a command unless cupsd is running. You can either use `lpadmin` or stop cupsd and then manually edit the Printers.conf file. I would recommend using `lpadmin`.
I am not sure what you put in for "command". I presume you specified the page limit. Did you also specify the job quota period?
I had no problem settin a page quoto as a test. I set a page quoto of two pages each hour. My command was:
lpadmin -p EPSON_Workforce_1100 -o job-quota-period=3600 -o job-page-limit=2
I then restarted cupsd to make in case the lpadmin command did not cause it to restart:
sudo launchctl unload /System/Library/LaunchDaemons/org.cups.cupsd.plist
sudo launchctl load /System/Library/LaunchDaemons/org.cups.cupsd.plist
I was able to print two pages. The third page gave me an error while printing message.
Message was edited by: Matt Broughton -
Trouble with ping localhost not working.
I'm using a Mac Book Pro running Mountain Lion 10.8.2.
Using Xcode I tried to test my app and found an alert box saying a string 'localhost' was not found. Tried to ping localhost and found that the DNS can't resolve this domain. I don't know if it's related but since a few weeks ago I can't use network printers hosted on Windows computers. OS X sees the workgroup and list computers but when I try to connect it throws an error telling the IP is wrong or the connection is lost.
Even stranger is the fact that ping can resolve localhost. (with the dot at the end).
Any help with either of this two issues??Check the hosts file (/etc/hosts). It should begin with this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1 localhost
fe80::1%lo0 localhost -
HELP PLZ *** localhost:7001/wls_utc os not working.
Hi experts,
I am using WLS 10.3.0.0 where *"http://localhost:7001/wls_utc"* os not working.
I could able to access http://localhost:7001/console. but cant able to access wls_utc. Please let me know the setting which and where I have to modify inroder to open that. I cant able to test my web services without this url. Please help me
thanks
loguHi Logu,
Please install the TestClient provided as part of weblogic installation in your WLS Server to Test any webservice... This will work even if your Servers are running in Production Mode...
Location : *<BEA_HOME>\<WL_HOME>\server\lib\wlstestclient.ear*
Deploy it in your Server or Cluster as if it is a Normal Light-weight Application.
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com (WebLogic Wonders Are Here) -
HI Guys,
We have multisite application with two urls
If i use one of the url then i am able to run application properly
ex :http://xxx.com:8080/contextRoot
but if i give the url like this http://localhost:8080/contextRoot then i am getting
Oops! Google Chrome could not connect to localhost:8080
this error
why its happening like this
if i want to access with localhost what we have to doSiteManager creates sitemap based on siterepository, So u don't need to worry mapping.
The reason we use default site, so that If something goes wrong,we will atleast have one working site.
for default site : atg\multisite\DefaultSiteRuleFilter :
defaultSiteId=mystore
enabled=true
for site mapping : If u wish u can provide url mapping too(No need) in atg\multisite\URLPatternMatchingRuleFilter
URLs=\localhost:7001/shop/mystore=mystore,localhost:7001/shop/mystore2=mystore2
Enable virtual context root service so that ur virtual context root can be recognized by ATG. MUST DO for multisite
\atg\dynamo\service\VirtualContextRootService enabled=true
Most common error: site is not enabled, change the property in siterepository.
Now also if it's not working Provide see the logs :
atg\sitemap\SitemapGeneratorService
Try to debug the issue with logs, It will always be helpful.
Thanks,
Nitin. -
TNSPING ip number not working TNSPING localhost is working?
Hi i've installed Oracle 11gR2 Enterprise edition on my machine.
tnsping ip number(XX.XXX.XX.XXX) is not working
but
tnsping localhost is working
Does this mean that the current instllation is not a server but a client?you have to put the ip address of your remote machine in /etc/hosts -----unix
and C:\Windows\System32\drivers\etc\hosts
example
192.168.60.10 mydomain.com
then
cmd windows---tnsping mydomain.com
$ tnsping mydomain.com --unix -
Scheduling is not working in BI Publisher
Hi all,
I am trying to schedule the report on BI publisher it's giving the following error:
oracle.apps.xdo.servlet.scheduler.ProcessingException: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12519, TNS:no appropriate service handler found
The Connection descriptor used by the client was: localhost:1521:xe (I am using oracle database 10g and obiee 10.1.3.2).
I have followed the instructions provided in the link "Exploring Advanced Features of Oracle Business Intelligence Publisher"
Created mail server as instructed in the link ...
Problems are:
Unable to connect incoming and outgoing mail servers. I have used my machine host name i.e user as both incoming and outgoing server (u.ser.com)
also Scheduled jobs are not working in BI publisher.
Please let me know the solution for the above problem.
regards
chandra kanth.gurus,
pls answer the above one, as i am unable to proceed further.
regards
chandra kanth. -
IMAGEIO IS WORKING BUT BYTEARRAY IS NOT WORKING:
Hi all
I am getting images from gmail contacts and trying to store it in DB
using my http code:InputStream is=urlconnection.getInputStream();
i could able to store the inputstream in file using:
BufferedImage filebuffer=ImageIO.read(is);
FileOutputStream fos=new FileOutputStream("picturerecent.jpg");
ImageIO.write(filebuffer, "jpg", fos);
but i was trying to store it in DB using the following code but it is not working.i am having a question that
how it writing to a file without any problem.why not to database:
try {
String url = "jdbc:mysql://localhost:3306/";
String db = "test";
String driver = "com.mysql.jdbc.Driver";
Class.forName(driver);
con = DriverManager.getConnection(url+db,"root","");
try{
PreparedStatement psmnt;
psmnt = con.prepareStatement("insert into gmailphoto(id,Photo) "+ "values(?,?)");
psmnt.setInt(1, 9);
psmnt.setObject(2, is, java.sql.Types.BLOB);
int s = psmnt.executeUpdate();
Statement st = con.createStatement();
try{
ResultSet rs=st.executeQuery("select photo from gmailphoto where id=9");
if(rs.next())
{ //byte[] bytearray = new byte[4096];
int size=0;
File sImage;
//FIRST TRY
FileWriter wr=new FileWriter(new File("c:\\imageOutput.jpg"));
IOUtils.copy(rs.getBlob("photo").getBinaryStream(),wr);
//SECOND TRY
BufferedImage bf=ImageIO.read(new ByteArrayInputStream(rs.getBytes("photo")));
FileOutputStream fout=new FileOutputStream(new File("C:\\imageOut"));
if(bf!=null)ImageIO.write(bf, "jpg", fout);
if(wr!=null)
wr.flush();
wr.close();
rs.close();
}}catch(SQLException e){
System.out.println(e);
}Thanks a lot for helpbut i was trying to store it in DB using the following codeThere is no code here that writes to a database. There are two lots of code that write to a file.
-
Application not working on CentOS platform...
Hi,
I have created an application in Java1.5. I am also using swingX library for Hyperlink control. I have tested my application on various platform i.e. windows xp, Fedora, Ubantu. Its working fine. But this is not working on CentOS v5 platform. I got the following error.
[root@localhost MyApplication]# ./MyApplication.sh
JarClassLoader: Warning: Unable to load native library: java.lang.NullPointerException
JarClassLoader: Warning: Unable to load native library: java.lang.NullPointerException
JarClassLoader: Warning: Unable to load native library: java.lang.NullPointerException
JarClassLoader: Warning: Unable to load native library: java.lang.NullPointerException
UIDefaults.getUIError: failed to locate UI class:HyperlinkUI
Any suggestion on this.Looks like I'll have to use either an InfoMessage, or a Popup to display a message.
-
NTLM SSO is not working using IIS
Hi,
We have unable to login to the infoview using SSO getting u201C page canu2019t found u201C error.
1. We can login to the infoview using AD authentication when tomcat as the application server but we are unable to login to the infoview using SSO when IIS as the application server.
2. If we select the option called u201Cintegrated windows Authenticationu201D under internet options then the SSO is not working and if we uncheck the u201Cintegrated windows Authenticationu201D in the internet options then we are able to login to the infoview using SSO.We are able to login to the infoview using SSO on another environments and the working and problematic environments we Configured IIS6, XI2 SP4.
4.We tried to login to the infoview using http://servername instead of entire URL however we are getting error.
5.We restarted IIS but no use.
6.Our admin follow the below options-
Open a registry editor, such as Regedit.exe or Regedt32.exe.
Navigate to:
HKLM\System\CurrentControlSet\Services\HTTP\Parameters
Right-click Parameters, select New | DWORD value, and then name the value MaxFieldLength.
Right-click Parameters, select New | DWORD value, and then name the value MaxRequestBytes.
In the right pane, double-click MaxFieldLength, and then set its value to 32768 (decimal).
In the right pane, double-click MaxRequestBytes, and then set its value to 32768 (decimal).
Close the registry editor and restart the IIS Admin service for the change to take effect.
But we are getting same problem.
7.We tried to login to the infoview using http://localhost but issue still persists.
8.We installed jakarta redirector.Is this root cause of this issue?
9.We selected intigrated windows authentication under default websites and i am sure i gave all the options under internet information manager.
Any one please help on this.
My environment is-
BOXIR2 SP4,
NTLM SSO,
Windows 2003,
IIS6."We tried to login to the infoview using http://servername instead of entire URL however we are getting error"
What's the error using the hostname for SSO with integrated windows authentication enabled on only the infoview virtual directory?
Regards,
Tim -
Application is not working in Enterprise Portal (Access Denied)
Hi,
I have created one application..........This application contains one DropDownByKey element whenever i run this application all the material numbers are automatically populated from R/3....... once i selected material number all the fields related to that material number are displyed in my view..... It is working fine in my NWDS(WebDynpro).....
I have integrated this application into Enterprise Portal their i am not getting any data into DropDownList box from R/3.... when i run the application i am getting "ACESS DENIED" error ............
But i have another applicaton(FlightList) which is already integrated into Enterprise Portal..... its working fine......This is also accessing data from R/3.... but its working......
The material application is not working........
Please Help Me.....
Thanks & Regards
Ravi Shankar B
<b></b>Hi,
How have you defined the property "WAS host" for the portal system that you have created for the back-end?
You might get this error if the way you have defined this WAS host property and the way you are calling the portal are different. For example, if your WAS host property is "<hostname>:<portnumber>" and you are calling your portal as "localhost:<portnumber>", then you will get this error.
Also are you connecting to your portal using the fully qualified domain name? Don't call the portal simply as
<i>http://<host>:<port>/irj</i> but call it as http://<host>.<domain>:<port>/irj.
Regards,
Satyajit. -
Bluetooth USB Dongle does not work
I have this generic looking USB dongle (forgot the brand) that I use with my eMachines e725 laptop. It worked fine with Linux Mint 9 KDE 64bit that I had to use for the past 1.5 years. The moment I plugged the dongle in, it was instantly detected and the bluetooth icon turned active in the system tray. However it does not work with my ArchLinux 64bit install with KDE4.6 (updated to latest packages). Due to issues with the new Kernel 2.6.39 series, I am using the LTS kernel.
lsusb:
Bus 003 Device 009: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
tail -f /var/log/messages.log
Jul 10 17:56:26 localhost kernel: [11565.480026] usb 3-1: new full speed USB device using uhci_hcd and address 9
Jul 10 17:56:26 localhost kernel: [11565.728190] usb 3-1: configuration #1 chosen from 1 choice
I've installed bluez and bluedevil. In KDE System Settings, when I go to the bluetooth options, it says no bluetooth adapters have been found.
Last edited by MetalheadGautham (2011-07-10 13:28:51)Have you read the Bluetooth wiki page?
Seems to me you didn't run the relevant daemon.
Also, your thread title should include 'bluetooth' - 'USB dongle' on its own is too generic.
Last edited by tomk (2011-07-10 13:12:28) -
Issue with spamassassin, now mail not working
Hi ! I installed spamtrainer almost two months ago. Been feeding the [email protected] for several weeks now , 700 emails each day at least .
There was very little improvement if none at all. Tried to add "@local_domains_maps = (1)" to amavisd.conf last night thinking it might be the problem , though no virtual domain exist. This was one of the issue on the default Amavisd config. The other one is adding the symbolic link which I already done.
Computer froze while adding the parameter "@local_domains_maps = (1)", so I manually turn off the Power Mac, then mail stopped altogether. The mails are filing up but the clients couldn't send or receive since this incidence .
FF is the maincf. and amavis.conf
All help are greatly appreciated.
mail:/Users/sysadmin root# postconf -n
alias_maps = hash:/etc/aliases,hash:/var/mailman/data/aliases
always_bcc =
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debug_peer_level = 2
enable_server_options = yes
html_directory = no
inet_interfaces = all
local_recipient_maps = proxy:unix:passwd.byname $alias_maps
luser_relay =
mail_owner = postfix
mailbox_size_limit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
message_size_limit = 31457280
mydestination = $myhostname,localhost.$mydomain,localhost,mail.cpplaw.com,cpplaw.com
mydomain = cpplaw.com
mydomain_fallback = localhost
myhostname = mail.cpplaw.com
mynetworks = 127.0.0.1/32,192.168.1.0/24,127.0.0.1
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
owner_request_special = no
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpd_client_restrictions = permit_mynetworks permit
smtpd_tls_key_file =
unknown_local_recipient_reject_code = 550
virtual_mailbox_domains =
virtual_transport = virtual
mail:/Users/sysadmin root# postconf -n
alias_maps = hash:/etc/aliases,hash:/var/mailman/data/aliases
always_bcc =
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debug_peer_level = 2
enable_server_options = yes
html_directory = no
inet_interfaces = all
local_recipient_maps = proxy:unix:passwd.byname $alias_maps
luser_relay =
mail_owner = postfix
mailbox_size_limit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
message_size_limit = 31457280
mydestination = $myhostname,localhost.$mydomain,localhost,mail.cpplaw.com,cpplaw.com
mydomain = cpplaw.com
mydomain_fallback = localhost
myhostname = mail.cpplaw.com
mynetworks = 127.0.0.1/32,192.168.1.0/24,127.0.0.1
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
owner_request_special = no
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpd_client_restrictions = permit_mynetworks permit
smtpd_tls_key_file =
unknown_local_recipient_reject_code = 550
virtual_mailbox_domains =
virtual_transport = virtual
mail:/Users/sysadmin root#
_______________________Amavisd.cof_________________________
use strict;
# Configuration file for amavisd-new
# This software is licensed under the GNU General Public License (GPL).
# See comments at the start of amavisd-new for the whole license text.
#Sections:
# Section I - Essential daemon and MTA settings
# Section II - MTA specific
# Section III - Logging
# Section IV - Notifications/DSN, BOUNCE/REJECT/DROP/PASS destiny, quarantine
# Section V - Per-recipient and per-sender handling, whitelisting, etc.
# Section VI - Resource limits
# Section VII - External programs, virus scanners, SpamAssassin
# Section VIII - Debugging
#GENERAL NOTES:
# This file is a normal Perl code, interpreted by Perl itself.
# - make sure this file (or directory where it resides) is NOT WRITABLE
# by mere mortals, otherwise it represents a severe security risk!
# - for values which are interpreted as booleans, it is recommended
# to use 1 for true, and 0 or undef or '' for false.
# THIS IS DIFFERENT FROM OLDER AMAVIS VERSIONS where "no" also meant false,
# now it means true, like any nonempty string does!
# - Perl syntax applies. Most notably: strings in "" may include variables
# (which start with $ or @); to include characters @ and $ in double
# quoted strings, precede them by a backslash; in single-quoted strings
# the $ and @ lose their special meaning, so it is usually easier to use
# single quoted strings. Still, in both cases a backslash need to be doubled
# - variables with names starting with a '@' are lists, the values assigned
# to them should be lists as well, e.g. ('one@foo', $mydomain, "three");
# note the comma-separation and parenthesis. If strings in the list
# do not contain spaces nor variables, a Perl operator qw() may be used
# as a shorthand to split its argument on whitespace and produce a list
# of strings, e.g. qw( one@foo example.com three ); Note that the argument
# to qw is quoted implicitly and no variable interpretation is done within
# (no '$' variable evaluations). The #-initiated comments can not be used
# within the string. In other words, $ and # lose their special meaning
# withing a qw argument, just like within '...' strings.
# - all e-mail addresses in this file and as used internally by the daemon
# are in their raw (rfc2821-unquoted and nonbracketed) form, i.e.
# Bob "Funny" [email protected], not: "Bob \"Funny\" Dude"@example.com
# and not <"@example.com>; also: '' and not ''.
# Section I - Essential daemon and MTA settings
# $MYHOME serves as a quick default for some other configuration settings.
# More refined control is available with each individual setting further down.
# $MYHOME is not used directly by the program. No trailing slash!
#$MYHOME = '/var/lib/amavis'; # (default is '/var/amavis')
# : $mydomain serves as a quick default for some other configuration settings.
# : More refined control is available with each individual setting further down.
# : $mydomain is never used directly by the program.
$mydomain = 'cpplaw.com'; aol.com'; # (no useful default)
# Set the user and group to which the daemon will change if started as root
# (otherwise just keep the UID unchanged, and these settings have no effect):
$daemon_user = 'clamav'; # (no default; customary: vscan or amavis)
$daemon_group = 'clamav'; # (no default; customary: vscan or amavis)
# Runtime working directory (cwd), and a place where
# temporary directories for unpacking mail are created.
# (no trailing slash, may be a scratch file system)
$TEMPBASE = $MYHOME; # (must be set if other config vars use is)
#$TEMPBASE = "$MYHOME/tmp"; # prefer to keep home dir /var/amavis clean?
# $helpers_home sets environment variable HOME, and is passed as option
# 'home_dir_for_helpers' to Mail::SpamAssassin::new. It should be a directory
# on a normal persistent file system, not a scratch or temporary file system
#$helpers_home = $MYHOME; # (defaults to $MYHOME)
#$daemon_chroot_dir = $MYHOME; # (default is undef, meaning: do not chroot)
#$pid_file = "$MYHOME/amavisd.pid"; # (default is "$MYHOME/amavisd.pid")
#$lock_file = "$MYHOME/amavisd.lock"; # (default is "$MYHOME/amavisd.lock")
# set environment variables if you want (no defaults):
$ENV{TMPDIR} = $TEMPBASE; # wise, but usually not necessary
# MTA SETTINGS, UNCOMMENT AS APPROPRIATE,
# both $forward_method and $notify_method default to 'smtp:127.0.0.1:10025'
# POSTFIX, or SENDMAIL in dual-MTA setup, or EXIM V4
# (set host and port number as required; host can be specified
# as IP address or DNS name (A or CNAME, but MX is ignored)
#$forward_method = 'smtp:127.0.0.1:10025'; # where to forward checked mail
#$notify_method = $forward_method; # where to submit notifications
# NOTE: The defaults (above) are good for Postfix or dual-sendmail. You MUST
# uncomment the approprate settings below if using other setups!
# SENDMAIL MILTER, using amavis-milter.c helper program:
#$forward_method = undef; # no explicit forwarding, sendmail does it by itself
# milter; option -odd is needed to avoid deadlocks
#$notify_method = 'pipe:flags=q argv=/usr/sbin/sendmail -Ac -i -odd -f ${sender} -- ${recipient}';
# just a thought: can we use use -Am instead of -odd ?
# SENDMAIL (old non-milter setup, as relay):
#$forward_method = 'pipe:flags=q argv=/usr/sbin/sendmail -C/etc/sendmail.orig.cf -i -f ${sender} -- ${recipient}';
#$notify_method = $forward_method;
# SENDMAIL (old non-milter setup, amavis.c calls local delivery agent):
#$forward_method = undef; # no explicit forwarding, amavis.c will call LDA
#$notify_method = 'pipe:flags=q argv=/usr/sbin/sendmail -Ac -i -f ${sender} -- ${recipient}';
# EXIM v3 (not recommended with v4 or later, which can use SMTP setup instead):
#$forward_method = 'pipe:flags=q argv=/usr/sbin/exim -oMr scanned-ok -i -f ${sender} -- ${recipient}';
#$notify_method = $forward_method;
# prefer to collect mail for forwarding as BSMTP files?
#$forward_method = "bsmtp:$MYHOME/out-%i-%n.bsmtp";
#$notify_method = $forward_method;
# Net::Server pre-forking settings
# You may want $max_servers to match the width of your MTA pipe
# feeding amavisd, e.g. with Postfix the 'Max procs' field in the
# master.cf file, like the '2' in the: smtp-amavis unix - - n - 2 smtp
$max_servers = 2; # number of pre-forked children (default 2)
$max_requests = 10; # retire a child after that many accepts (default 10)
$child_timeout=5*60; # abort child if it does not complete each task in n sec
# (default: 8*60 seconds)
# Check also the settings of @av_scanners at the end if you want to use
# virus scanners. If not, you may want to delete the whole long assignment
# to the variable @av_scanners, which will also remove the virus checking
# code (e.g. if you only want to do spam scanning).
# Here is a QUICK WAY to completely DISABLE some sections of code
# that WE DO NOT WANT (it won't even be compiled-in).
# For more refined controls leave the following two lines commented out,
# and see further down what these two lookup lists really mean.
#@bypass_virus_checks_acl = qw( . ); # uncomment to DISABLE anti-virus code
#@bypass_spam_checks_acl = qw( . ); # uncomment to DISABLE anti-spam code
# Any setting can be changed with a new assignment, so make sure
# you do not unintentionally override these settings further down!
# Lookup list of local domains (see README.lookups for syntax details)
# NOTE:
# For backwards compatibility the variable names @local_domains (old) and
# @local_domains_acl (new) are synonyms. For consistency with other lookups
# the name @local_domains_acl is now preferred. It also makes it more
# obviously distinct from the new %local_domains hash lookup table.
# local_domains* lookup tables are used in deciding whether a recipient
# is local or not, or in other words, if the message is outgoing or not.
# This affects inserting spam-related headers for local recipients,
# limiting recipient virus notifications (if enabled) to local recipients,
# in deciding if address extension may be appended, and in SQL lookups
# for non-fqdn addresses. Set it up correctly if you need features
# that rely on this setting (or just leave empty otherwise).
# With Postfix (2.0) a quick reminder on what local domains normally are:
# a union of domains spacified in: $mydestination, $virtual_alias_domains,
# $virtual_mailbox_domains, and $relay_domains.
@local_domains_acl = ( ".$mydomain" ); # $mydomain and its subdomains
# @local_domains_acl = qw(); # default is empty, no recipient treated as local
# @local_domains_acl = qw( .example.com );
# @local_domains_acl = qw( .example.com !host.sub.example.net .sub.example.net );
# @local_domains_acl = ( ".$mydomain", '.example.com', 'sub.example.net' );
# or alternatively(A), using a Perl hash lookup table, which may be assigned
# directly, or read from a file, one domain per line; comments and empty lines
# are ignored, a dot before a domain name implies its subdomains:
#read_hash(\%local_domains, '/var/amavis/local_domains');
#or alternatively(B), using a list of regular expressions:
# $local_domains_re = new_RE( qr'[@.]example\.com$'i );
# see README.lookups for syntax and semantics
# Section II - MTA specific (defaults should be ok)
# if $relayhost_is_client is true, IP address in $notify_method and
# $forward_method is dynamically overridden with SMTP client peer address
# if available, which makes possible for several hosts to share one daemon
#$relayhost_is_client = 1; # (defaults to false)
#$insert_received_line = 1; # behave like MTA: insert 'Received:' header
# (does not apply to sendmail/milter)
# (default is true)
# AMAVIS-CLIENT PROTOCOL INPUT SETTINGS (e.g. with sendmail milter)
# (used with amavis helper clients like amavis-milter.c and amavis.c,
# NOT needed for Postfix and Exim)
$unix_socketname = "$MYHOME/amavisd.sock"; # amavis helper protocol socket
#$unix_socketname = undef; # disable listening on a unix socket
# (default is undef, i.e. disabled)
# (usual setting is $MYHOME/amavisd.sock)
# Do we receive quoted or raw addresses from the helper program?
# (does not apply to SMTP; defaults to true)
#$gets_addr_in_quoted_form = 1; # "Bob \"Funny\" Dude"@example.com
#$gets_addr_in_quoted_form = 0; # Bob "Funny" [email protected]
# SMTP SERVER (INPUT) PROTOCOL SETTINGS (e.g. with Postfix, Exim v4, ...)
# (used when MTA is configured to pass mail to amavisd via SMTP or LMTP)
$inet_socket_port = 10024; # accept SMTP on this local TCP port
# (default is undef, i.e. disabled)
# multiple ports may be provided: $inet_socket_port = [10024, 10026, 10028];
# SMTP SERVER (INPUT) access control
# - do not allow free access to the amavisd SMTP port !!!
# when MTA is at the same host, use the following (one or the other or both):
#$inet_socket_bind = '127.0.0.1'; # limit socket bind to loopback interface
# (default is '127.0.0.1')
@inet_acl = qw( 127.0.0.1 ); # allow SMTP access only from localhost IP
# (default is qw( 127.0.0.1 ) )
# when MTA (one or more) is on a different host, use the following:
#@inet_acl = qw(127/8 10.1.0.1 10.1.0.2); # adjust the list as appropriate
#$inet_socket_bind = undef; # bind to all IP interfaces
# Example1:
# @inet_acl = qw( 127/8 10/8 172.16/12 192.168/16 );
# permit only SMTP access from loopback and rfc1918 private address space
# Example2:
# @inet_acl = qw( !192.168.1.12 172.16.3.3 !172.16.3/255.255.255.0
# 127.0.0.1 10/8 172.16/12 192.168/16 );
# matches loopback and rfc1918 private address space except host 192.168.1.12
# and net 172.16.3/24 (but host 172.16.3.3 within 172.16.3/24 still matches)
# Example3:
# @inet_acl = qw( 127/8
# !172.16.3.0 !172.16.3.127 172.16.3.0/25
# !172.16.3.128 !172.16.3.255 172.16.3.128/25 );
# matches loopback and both halves of the 172.16.3/24 C-class,
# split into two subnets, except all four broadcast addresses
# for these subnets
# See README.lookups for details on specifying access control lists.
# Section III - Logging
# true (e.g. 1) => syslog; false (e.g. 0) => logging to file
$DO_SYSLOG = 0; # (defaults to false)
#$SYSLOG_LEVEL = 'user.info'; # (defaults to 'mail.info')
# Log file (if not using syslog)
$LOGFILE = "/var/log/amavis.log"; # (defaults to empty, no log)
#NOTE: levels are not strictly observed and are somewhat arbitrary
# 0: startup/exit/failure messages, viruses detected
# 1: args passed from client, some more interesting messages
# 2: virus scanner output, timing
# 3: server, client
# 4: decompose parts
# 5: more debug details
$log_level = 4; # (defaults to 0)
# Customizeable template for the most interesting log file entry (e.g. with
# $log_level=0) (take care to properly quote Perl special characters like '\')
# For a list of available macros see README.customize .
# only log infected messages (useful with log level 0):
# $log_templ = '[? %#V |[? %#F ||banned filename ([%F|,])]|infected ([%V|,])]#
# [? %#V |[? %#F ||, from=<%o>, to=[<%R>|,][? %i ||, quarantine %i]]#
# |, from=<%o>, to=[<%R>|,][? %i ||, quarantine %i]]';
# log both infected and noninfected messages (default):
$log_templ = '[? %#V |[? %#F |[?%#D|Not-Delivered|Passed]|BANNED name/type (%F)]|INFECTED (%V)], #
<%o> -> [<%R>|,][? %i ||, quarantine %i], Message-ID: %m, Hits: %c';
# Section IV - Notifications/DSN, BOUNCE/REJECT/DROP/PASS destiny, quarantine
# Select notifications text encoding when Unicode-aware Perl is converting
# text from internal character representation to external encoding (charset
# in MIME terminology)
# to be used in RFC 2047-encoded header field bodies, e.g. in Subject:
#$hdr_encoding = 'iso-8859-1'; # (default: 'iso-8859-1')
# to be used in notification body text: its encoding and Content-type.charset
#$bdy_encoding = 'iso-8859-1'; # (default: 'iso-8859-1')
# Default template texts for notifications may be overruled by directly
# assigning new text to template variables, or by reading template text
# from files. A second argument may be specified in a call to read_text(),
# specifying character encoding layer to be used when reading from the
# external file, e.g. 'utf8', 'iso-8859-1', or often just $bdy_encoding.
# Text will be converted to internal character representation by Perl 5.8.0
# or later; second argument is ignored otherwise. See PerlIO::encoding,
# Encode::PerlIO and perluniintro man pages.
# $notify_sender_templ = read_text('/var/amavis/notify_sender.txt');
# $notify_virus_sender_templ= read_text('/var/amavis/notify_virus_sender.txt');
# $notify_virus_admin_templ = read_text('/var/amavis/notify_virus_admin.txt');
# $notify_virus_recips_templ= read_text('/var/amavis/notify_virus_recips.txt');
# $notify_spam_sender_templ = read_text('/var/amavis/notify_spam_sender.txt');
# $notify_spam_admin_templ = read_text('/var/amavis/notify_spam_admin.txt');
# If notification template files are collectively available in some directory,
# use read_l10n_templates which calls read_text for each known template.
# read_l10n_templates('/etc/amavis/en_US');
# Here is an overall picture (sequence of events) of how pieces fit together
# (only virus controls are shown, spam controls work the same way):
# bypass_virus_checks set for all recipients? ==> PASS
# no viruses? ==> PASS
# log virus if $log_templ is nonempty
# quarantine if $virus_quarantine_to is nonempty
# notify admin if $virus_admin (lookup) nonempty
# notify recips if $warnvirusrecip and (recipient is local or $warn_offsite)
# add address extensions for local recipients (when enabled)
# send (non-)delivery notifications
# to sender if DSN needed (BOUNCE) or ($warnvirussender and D_PASS)
# virus_lovers or final_destiny==D_PASS ==> PASS
# DISCARD (2xx) or REJECT (5xx) (depending on final_*_destiny)
# Equivalent flow diagram applies for spam checks.
# If a virus is detected, spam checking is skipped entirely.
# The following symbolic constants can be used in *destiny settings:
# D_PASS mail will pass to recipients, regardless of bad contents;
# D_DISCARD mail will not be delivered to its recipients, sender will NOT be
# notified. Effectively we lose mail (but will be quarantined
# unless disabled). Not a decent thing to do for a mailer.
# D_BOUNCE mail will not be delivered to its recipients, a non-delivery
# notification (bounce) will be sent to the sender by amavisd-new;
# Exception: bounce (DSN) will not be sent if a virus name matches
# $viruses_that_fake_sender_re, or to messages from mailing lists
# (Precedence: bulk|list|junk);
# D_REJECT mail will not be delivered to its recipients, sender should
# preferably get a reject, e.g. SMTP permanent reject response
# (e.g. with milter), or non-delivery notification from MTA
# (e.g. Postfix). If this is not possible (e.g. different recipients
# have different tolerances to bad mail contents and not using LMTP)
# amavisd-new sends a bounce by itself (same as D_BOUNCE).
# Notes:
# D_REJECT and D_BOUNCE are similar, the difference is in who is responsible
# for informing the sender about non-delivery, and how informative
# the notification can be (amavisd-new knows more than MTA);
# With D_REJECT, MTA may reject original SMTP, or send DSN (delivery status
# notification, colloquially called 'bounce') - depending on MTA;
# Best suited for sendmail milter, especially for spam.
# With D_BOUNCE, amavisd-new (not MTA) sends DSN (can better explain the
# reason for mail non-delivery, but unable to reject the original
# SMTP session). Best suited to reporting viruses, and for Postfix
# and other dual-MTA setups, which can't reject original client SMTP
# session, as the mail has already been enqueued.
$final_virus_destiny = D_BOUNCE; # (defaults to D_BOUNCE)
$final_banned_destiny = D_BOUNCE; # (defaults to D_BOUNCE)
$final_spam_destiny = D_PASS; # (defaults to D_REJECT)
$final_bad_header_destiny = D_PASS; # (defaults to D_PASS), D_BOUNCE suggested
# Alternatives to consider for spam:
# - use D_PASS if clients will do filtering based on inserted mail headers;
# - use D_DISCARD, if kill_level is set safely high;
# - use D_BOUNCE instead of D_REJECT if not using milter;
# There are no sensible alternatives to D_BOUNCE for viruses, but consider:
# - use D_PASS (or virus_lovers) and $warnvirussender=1 to deliver viruses;
# - use D_REJECT instead of D_BOUNCE if using milter and under heavy
# virus storm;
# Don't bother to set both D_DISCARD and $warn*sender=1, it will get mapped
# to D_BOUNCE.
# The separation of *_destiny values into D_BOUNCE, D_REJECT, D_DISCARD
# and D_PASS made settings $warnvirussender and $warnspamsender only still
# useful with D_PASS.
# The following $warn*sender settings are ONLY used when mail is
# actually passed to recipients ($final_*_destiny=D_PASS, or *_lovers*).
# Bounces or rejects produce non-delivery status notification anyway.
# Notify virus sender?
#$warnvirussender = 1; # (defaults to false (undef))
# Notify spam sender?
#$warnspamsender = 1; # (defaults to false (undef))
# Notify sender of banned files?
#$warnbannedsender = 1; # (defaults to false (undef))
# Notify sender of syntactically invalid header containing non-ASCII characters?
#$warnbadhsender = 1; # (defaults to false (undef))
# Notify virus (or banned files) RECIPIENT?
# (not very useful, but some policies demand it)
#$warnvirusrecip = 1; # (defaults to false (undef))
#$warnbannedrecip = 1; # (defaults to false (undef))
# Notify also non-local virus/banned recipients if $warn*recip is true?
# (including those not matching local_domains*)
#$warn_offsite = 1; # (defaults to false (undef), i.e. only notify locals)
# Treat envelope sender address as unreliable and don't send sender
# notification / bounces if name(s) of detected virus(es) match the list.
# Note that virus names are supplied by external virus scanner(s) and are
# not standardized, so virus names may need to be adjusted.
# See README.lookups for syntax.
$viruses_that_fake_sender_re = new_RE(
qr'nimda|hybris|klez|bugbear|yaha|braid|sobig|fizzer|palyh|peido|holar'i );
# where to send ADMIN VIRUS NOTIFICATIONS (should be a fully qualified address)
# - the administrator address may be a simple fixed e-mail address (a scalar),
# or may depend on the SENDER address (e.g. its domain), in which case
# a ref to a hash table can be specified (specify lower-cased keys,
# dot is a catchall, see README.lookups).
# Empty or undef lookup disables virus admin notifications.
$virus_admin = '[email protected]';
# $virus_admin = undef; # do not send virus admin notifications (default)
# $virus_admin = {'not.example.com' => '', '.' => '[email protected]'};
# $virus_admin = '[email protected]';
# equivalent to $virus_admin, but for spam admin notifications:
#$spam_admin = '[email protected]';# $spam_admin = undef; # do not send spam admin notifications (default)
# $spam_admin = {'not.example.com' => '', '.' => '[email protected]'};
#advanced example, using a hash lookup table:
# - $virus_admin = {
# '[email protected]' => '[email protected]',
# '.sub1.example.com' => '[email protected]',
# '.sub2.example.com' => '', # don't send admin notifications
# 'a.sub3.example.com' => '[email protected]',
# '.sub3.example.com' => '[email protected]',
# '.example.com' => '[email protected]', # catchall for our virus senders
# '.' => '[email protected]', # catchall for the rest
# whom notification reports are sent from (ENVELOPE SENDER);
# may be a null reverse path, or a fully qualified address:
# (admin and recip sender addresses default to $mailfrom
# for compatibility, which in turn defaults to undef (empty) )
# If using strings in double quotes, don't forget to quote @, i.e. \@
$mailfrom_notify_admin = "virusalert\@$mydomain";
$mailfrom_notify_recip = "virusalert\@$mydomain";
$mailfrom_notify_spamadmin = "spam.police\@$mydomain";
# 'From' HEADER FIELD for sender and admin notifications.
# This should be a replyable address, see rfc1894. Not to be confused
# with $mailfrom_notify_sender, which is the envelope address and
# should be empty (null reverse path) according to rfc2821.
# $hdrfrom_notify_sender = "amavisd-new <postmaster\@$mydomain>";
# $hdrfrom_notify_sender = 'amavisd-new <[email protected]>';
# (defaults to: "amavisd-new <postmaster\@$myhostname>")
# $hdrfrom_notify_admin = $mailfrom_notify_admin;
# (defaults to: $mailfrom_notify_admin)
# $hdrfrom_notify_spamadmin = $mailfrom_notify_spamadmin;
# (defaults to: $mailfrom_notify_spamadmin)
# whom quarantined messages appear to be sent from (envelope sender)
$mailfrom_to_quarantine = undef; # original sender if undef, or set explicitly
# (default is undef)
# Location to put infected mail into: (applies to 'local:' quarantine method)
# empty for not quarantining, may be a file (mailbox),
# or a directory (no trailing slash)
# (the default value is undef, meaning no quarantine)
$QUARANTINEDIR = '/var/virusmails';
#$virus_quarantine_method = "local:virus-%i-%n"; # default
#$spam_quarantine_method = "local:spam-%b-%i-%n"; # default
#use the new 'bsmtp:' method as an alternative to the default 'local:'
#$virus_quarantine_method = "bsmtp:$QUARANTINEDIR/virus-%i-%n.bsmtp";
#$spam_quarantine_method = "bsmtp:$QUARANTINEDIR/spam-%b-%i-%n.bsmtp";
# When using the 'local:' quarantine method (default), the following applies:
# A finer control of quarantining is available through variable
# $virus_quarantine_to/$spam_quarantine_to. It may be a simple scalar string,
# or a ref to a hash lookup table, or a regexp lookup table object,
# which makes possible to set up per-recipient quarantine addresses.
# The value of scalar $virus_quarantine_to/$spam_quarantine_to (or a
# per-recipient lookup result from the hash table %$virus_quarantine_to)
# is/are interpreted as follows:
# VARIANT 1:
# empty or undef disables quarantine;
# VARIANT 2:
# a string NOT containg an '@';
# amavisd will behave as a local delivery agent (LDA) and will quarantine
# viruses to local files according to hash %local_delivery_aliases (pseudo
# aliases map) - see subroutine mail_to_local_mailbox() for details.
# Some of the predefined aliases are 'virus-quarantine' and 'spam-quarantine'.
# Setting $virus_quarantine_to ($spam_quarantine_to) to this string will:
# * if $QUARANTINEDIR is a directory, each quarantined virus will go
# to a separate file in the $QUARANTINEDIR directory (traditional
# amavis style, similar to maildir mailbox format);
# * otherwise $QUARANTINEDIR is treated as a file name of a Unix-style
# mailbox. All quarantined messages will be appended to this file.
# Amavisd child process must obtain an exclusive lock on the file during
# delivery, so this may be less efficient than using individual files
# or forwarding to MTA, and it may not work across NFS or other non-local
# file systems (but may be handy for pickup of quarantined files via IMAP
# for example);
# VARIANT 3:
# any email address (must contain '@').
# The e-mail messages to be quarantined will be handed to MTA
# for delivery to the specified address. If a recipient address local to MTA
# is desired, you may leave the domain part empty, e.g. 'infected@', but the
# '@' character must nevertheless be included to distinguish it from variant 2.
# This method enables more refined delivery control made available by MTA
# (e.g. its aliases file, other local delivery agents, dealing with
# privileges and file locking when delivering to user's mailbox, nonlocal
# delivery and forwarding, fan-out lists). Make sure the mail-to-be-quarantined
# will not be handed back to amavisd for checking, as this will cause a loop
# (hopefully broken at some stage)! If this can be assured, notifications
# will benefit too from not being unecessarily virus-scanned.
# By default this is safe to do with Postfix and Exim v4 and dual-sendmail
# setup, but probably not safe with sendmail milter interface without
# precaution.
# (the default value is undef, meaning no quarantine)
#$virus_quarantine_to = '[email protected]'; # traditional local quarantine
#$virus_quarantine_to = 'infected@'; # forward to MTA for delivery
#$virus_quarantine_to = "virus-quarantine\@$mydomain"; # similar
#$virus_quarantine_to = '[email protected]'; # similar
#$virus_quarantine_to = undef; # no quarantine
#$virus_quarantine_to = new_RE( # per-recip multiple quarantines
# [qr'^user@example\.com$'i => 'infected@'],
# [qr'^(.*)@example\.com$'i => 'virus-${1}@example.com'],
# [qr'^(.*)(@[^@])?$'i => 'virus-${1}${2}'],
# [qr/.*/ => 'virus-quarantine'] );
# similar for spam
# (the default value is undef, meaning no quarantine)
#$spam_quarantine_to = '[email protected]';
#$spam_quarantine_to = "spam-quarantine\@$mydomain";
#$spam_quarantine_to = new_RE( # per-recip multiple quarantines
# [qr'^(.*)@example\.com$'i => 'spam-${1}@example.com'],
# [qr/.*/ => 'spam-quarantine'] );
# In addition to per-recip quarantine, a by-sender lookup is possible. It is
# similar to $spam_quarantine_to, but the lookup key is the sender address:
#$spam_quarantine_bysender_to = undef; # dflt: no by-sender spam quarantine
# Add X-Virus-Scanned header field to mail?
$X_HEADER_TAG = 'X-Virus-Scanned'; # (default: undef)
# Leave empty to add no header field # (default: undef)
$X_HEADER_LINE = "by amavisd-new at $mydomain";
$remove_existing_x_scanned_headers = 0; # leave existing X-Virus-Scanned alone
#$remove_existing_x_scanned_headers= 1; # remove existing headers
# (defaults to false)
$remove_existing_spam_headers = 0; # leave existing X-Spam* headers alone
#$remove_existing_spam_headers = 1; # remove existing spam headers if
# spam scanning is enabled (default)
# set $bypass_decode_parts to true if you only do spam scanning, or if you
# have a good virus scanner that can deal with compression and recursively
# unpacking archives by itself, and save amavisd the trouble.
# Disabling decoding also causes banned_files checking to only see
# MIME names and MIME content types, not the content classification types
# as provided by the file(1) utility.
# It is a double-edged sword, make sure you know what you are doing!
#$bypass_decode_parts = 1; # (defaults to false)
# don't trust this file type or corresponding unpacker for this file type,
# keep both the original and the unpacked file
# (lookup key is what file(1) utility returned):
$keep_decoded_original_re = new_RE(
qr'^(ASCII|text|uuencoded|xxencoded|binhex)'i,
# Checking for banned MIME types and names. If any mail part matches,
# the whole mail is rejected, much like the way viruses are handled.
# A list in object $banned_filename_re can be defined to provide a list
# of Perl regular expressions to be matched against each part's:
# * Content-Type value (both declared and effective mime-type),
# including the possible security risk content types
# message/partial and message/external-body, as specified by rfc2046;
# * declared (recommended) file names as specified by MIME subfields
# Content-Disposition.filename and Content-Type.name, both in their
# raw (encoded) form and in rfc2047-decoded form if applicable;
# * file content type as guessed by 'file(1)' utility, both the raw result
# from file(1), as well as short type name, classified into names such as
# .asc, .txt, .html, .doc, .jpg, .pdf, .zip, .exe, ..., which is always
# beginning with a dot - see subroutine determine_file_types().
# This step is done only if $bypass_decode_parts is not true.
# * leave $banned_filename_re undefined to disable these checks
# (giving an empty list to new_RE() will also always return false)
$banned_filename_re = new_RE(
qr'\.[a-zA-Z][a-zA-Z0-9]{0,3}\.(vbs|pif|scr|bat|com|exe|dll)$'i, # double extension
# qr'.\.(exe|vbs|pif|scr|bat|com)$'i, # banned extension - basic
# qr'.\.(ade|adp|bas|bat|chm|cmd|com|cpl|crt|exe|hlp|hta|inf|ins|isp|js|
# jse|lnk|mdb|mde|msc|msi|msp|mst|pcd|pif|reg|scr|sct|shs|shb|vb|
# vbe|vbs|wsc|wsf|wsh)$'ix, # banned extension - long
# qr'^\.(exe|zip|lha|tnef)$'i, # banned file(1) types
# qr'^application/x-msdownload$'i, # banned MIME types
# qr'^message/partial$'i, qr'^message/external-body$'i, # rfc2046
# See http://support.microsoft.com/default.aspx?scid=kb;EN-US;q262631
# and http://www.cknow.com/vtutor/vtextensions.htm
# A little trick: a pattern qr'\.exe$' matches both a short type name '.exe',
# as well as any file name which happens to end with .exe. If only matching
# a file name is desired, but not the short name, a pattern qr'.\.exe$'i
# or similar may be used, which requires that at least one character preceeds
# the '.exe', and so it will never match short file types, which always start
# with a dot.
# Section V - Per-recipient and per-sender handling, whitelisting, etc.
# %virus_lovers, @virus_lovers_acl and $virus_lovers_re lookup tables:
# (these should be considered policy options, they do not disable checks,
# see bypas*checks for that!)
# Exclude certain RECIPIENTS from virus filtering by adding their lower-cased
# envelope e-mail address (or domain only) to the hash %virus_lovers, or to
# the access list @virus_lovers_acl - see README.lookups and examples.
# Make sure the appropriate form (e.g. external/internal) of address
# is used in case of virtual domains, or when mapping external to internal
# addresses, etc. - this is MTA-specific.
# Notifications would still be generated however (see the overall
# picture above), and infected mail (if passed) gets additional header:
# X-AMaViS-Alert: INFECTED, message contains virus: ...
# (header not inserted with milter interface!)
# NOTE (milter interface only): in case of multiple recipients,
# it is only possible to drop or accept the message in its entirety - for all
# recipients. If all of them are virus lovers, we'll accept mail, but if
# at least one recipient is not a virus lover, we'll discard the message.
# %bypass_virus_checks, @bypass_virus_checks_acl and $bypass_virus_checks_re
# lookup tables:
# (this is mainly a time-saving option, unlike virus_lovers* !)
# Similar in concept to %virus_lovers, a hash %bypass_virus_checks,
# access list @bypass_virus_checks_acl and regexp list $bypass_virus_checks_re
# are used to skip entirely the decoding, unpacking and virus checking,
# but only if ALL recipients match the lookup.
# %bypass_virus_checks/@bypass_virus_checks_acl/$bypass_virus_checks_re
# do NOT GUARANTEE the message will NOT be checked for viruses - this may
# still happen when there is more than one recipient for a message, and
# not all of them match these lookup tables. To guarantee virus delivery,
# a recipient must also match %virus_lovers/@virus_lovers_acl lookups
# (but see milter limitations above),
# NOTE: it would not be clever to base virus checks on SENDER address,
# since there are no guarantees that it is genuine. Many viruses
# and spam messages fake sender address. To achieve selective filtering
# based on the source of the mail (e.g. IP address, MTA port number, ...),
# use mechanisms provided by MTA if available.
# Similar to lookup tables controlling virus checking, there exist
# spam scanning, banned names/types, and headers_checks control counterparts:
# %spam_lovers, @spam_lovers_acl, $spam_lovers_re
# %banned_files_lovers, @banned_files_lovers_acl, $banned_files_lovers_re
# %bad_header_lovers, @bad_header_lovers_acl, $bad_header_lovers_re
# and:
# %bypass_spam_checks/@bypass_spam_checks_acl/$bypass_spam_checks_re
# %bypass_banned_checks/@bypass_banned_checks_acl/$bypass_banned_checks_re
# %bypass_header_checks/@bypass_header_checks_acl/$bypass_header_checks_re
# See README.lookups for details about the syntax.
# The following example disables spam checking altogether,
# since it matches any recipient e-mail address (any address
# is a subdomain of the top-level root DNS domain):
# @bypass_spam_checks_acl = qw( . );
# @bypass_header_checks_acl = qw( [email protected] );
# @bad_header_lovers_acl = qw( [email protected] );
# See README.lookups for further detail, and examples below.
# $virus_lovers{lc("postmaster\@$mydomain")} = 1;
# $virus_lovers{lc('[email protected]')} = 1;
# $virus_lovers{lc('[email protected]')} = 1;
# $virus_lovers{lc('some.user@')} = 1; # this recipient, regardless of domain
# $virus_lovers{lc('[email protected]')} = 0; # never, even if domain matches
# $virus_lovers{lc('example.com')} = 1; # this domain, but not its subdomains
# $virus_lovers{lc('.example.com')}= 1; # this domain, including its subdomains
#or:
# @virus_lovers_acl = qw( [email protected] !lab.xxx.com .xxx.com yyy.org );
# $bypass_virus_checks{lc('[email protected]')} = 1;
# @bypass_virus_checks_acl = qw( some.ddd !butnot.example.com .example.com );
# @virus_lovers_acl = qw( [email protected] );
# $virus_lovers_re = new_RE( qr'(helpdesk|postmaster)@example\.com$'i );
# $spam_lovers{lc("postmaster\@$mydomain")} = 1;
# $spam_lovers{lc('[email protected]')} = 1;
# $spam_lovers{lc('[email protected]')} = 1;
# @spam_lovers_acl = qw( !.example.com );
# $spam_lovers_re = new_RE( qr'^user@example\.com$'i );
# don't run spam check for these RECIPIENT domains:
# @bypass_spam_checks_acl = qw( d1.com .d2.com a.d3.com );
# or the other way around (bypass check for all BUT these):
# @bypass_spam_checks_acl = qw( !d1.com !.d2.com !a.d3.com . );
# a practical application: don't check outgoing mail for spam:
# @bypass_spam_checks_acl = ( "!.$mydomain", "." );
# (a downside of which is that such mail will not count as ham in SA bayes db)
# Where to find SQL server(s) and database to support SQL lookups?
# A list of triples: (dsn,user,passw). (dsn = data source name)
# Specify more than one for multiple (backup) SQL servers.
# See 'man DBI', 'man DBD::mysql', 'DBD::Pg', ... for details.
# @lookup_sql_dsn =
# ( ['DBI:mysql:mail:host1', 'some-username1', 'some-password1'],
# ['DBI:mysql:mail:host2', 'some-username2', 'some-password2'] );
# ('mail' in the example is the database name, choose what you like)
# With PostgreSQL the dsn (first element of the triple) may look like:
# 'DBI:Pg:host=host1;dbname=mail'
# The SQL select clause to fetch per-recipient policy settings.
# The %k will be replaced by a comma-separated list of query addresses
# (e.g. full address, domain only, catchall). Use ORDER, if there
# is a chance that multiple records will match - the first match wins.
# If field names are not unique (e.g. 'id'), the later field overwrites the
# earlier in a hash returned by lookup, which is why we use '*,users.id'.
# No need to uncomment the following assignment if the default is ok.
# $sql_select_policy = 'SELECT *,users.id FROM users,policy'.
# ' WHERE (users.policy_id=policy.id) AND (users.email IN (%k))'.
# ' ORDER BY users.priority DESC';
# The SQL select clause to check sender in per-recipient whitelist/blacklist
# The first SELECT argument '?' will be users.id from recipient SQL lookup,
# the %k will be sender addresses (e.g. full address, domain only, catchall).
# The default value is:
# $sql_select_white_black_list = 'SELECT wb FROM wblist,mailaddr'.
# ' WHERE (rid=?) AND (sid=mailaddr.id) AND (mailaddr.email IN (%k))'.
# ' ORDER BY mailaddr.priority DESC';
# To disable SQL white/black list, set to undef (otherwise comment-out
# the following statement, leaving it at the default value):
$sql_select_white_black_list = undef; # undef disables SQL white/blacklisting
# If you decide to pass viruses (or spam) to certain recipients using the
# above lookup tables or using $final_virus_destiny=1, you can set
# the variable $addr_extension_virus ($addr_extension_spam) to some
# string, and the recipient address will have this string appended
# as an address extension to the local-part of the address. This extension
# can be used by final local delivery agent to place such mail in different
# folders. Leave these two variables undefined or empty strings to prevent
# appending address extensions. Setting has no effect on recipient which will
# not be receiving viruses/spam. Recipients who do not match lookup tables
# local_domains* are not affected.
# LDAs usually default to stripping away address extension if no special
# handling is specified, so having this option enabled normally does no harm,
# provided the $recipients_delimiter matches the setting on the final
# MTA's LDA.
# $addr_extension_virus = 'virus'; # (default is undef, same as empty)
# $addr_extension_spam = 'spam'; # (default is undef, same as empty)
# $addr_extension_banned = 'banned'; # (default is undef, same as empty)
# Delimiter between local part of the recipient address and address extension
# (which can optionally be added, see variables $addr_extension_virus and
# $addr_extension_spam). E.g. recipient address <[email protected]> gets changed
# to <[email protected]>.
# Delimiter should match equivalent (final) MTA delimiter setting.
# (e.g. for Postfix add 'recipient_delimiter = +' to main.cf)
# Setting it to an empty string or to undef disables this feature
# regardless of $addr_extension_virus and $addr_extension_spam settings.
$recipient_delimiter = '+'; # (default is '+')
# true: replace extension; false: append extension
# $replace_existing_extension = 1; # (default is false)
# Affects matching of localpart of e-mail addresses (left of '@')
# in lookups: true = case sensitive, false = case insensitive
$localpart_is_case_sensitive = 0; # (default is false)
# ENVELOPE SENDER WHITELISTING / BLACKLISTING - GLOBAL (RECIPIENT-INDEPENDENT)
# WHITELISTING: use ENVELOPE SENDER lookups to ENSURE DELIVERY from whitelisted
# senders even if the message is recognized as spam. Effectively, for the
# specified senders, message RECIPIENTS temporarily become 'spam_lovers', with
# further processing being the same as otherwise specified for spam lovers.
# It does not turn off inserting spam-related headers, if they are enabled.
# BLACKLISTING: messages from specified SENDERS are DECLARED SPAM.
# Effectively, for messages from blacklisted senders, spam level
# is artificially pushed high, and the normal spam processing applies,
# resulting in 'X-Spam-Flag: YES', high 'X-Spam-Level' bar and other usual
# reactions to spam, including possible rejection. If the message nevertheless
# still passes (e.g. for spam loving recipients), it is tagged as BLACKLISTED
# in the 'X-Spam-Status' header field, but the reported spam value and
# set of tests in this report header field (if available from SpamAssassin,
# which may have not been called) is not adjusted.
# A sender may be both white- and blacklisted at the same time,
# settings are independent. For example, being both white- and blacklisted,
# message is delivered to recipients, but is tagged as spam.
# If ALL recipients of the message either white- or blacklist the sender,
# spam scanning (calling the SpamAssassin) is bypassed, saving on time.
# The following variables (lookup tables) are available, with the semantics
# and syntax as specified in README.lookups:
# %whitelist_sender, @whitelist_sender_acl, $whitelist_sender_re
# %blacklist_sender, @blacklist_sender_acl, $blacklist_sender_re
# SOME EXAMPLES:
#ACL:
# @whitelist_sender_acl = qw( .example.com );
# @whitelist_sender_acl = ( ".$mydomain" ); # $mydomain and its subdomains
# NOTE: This is not a reliable way of turning off spam checks for
# locally-originating mail, as sender address can easily be faked.
# To reliably avoid spam-scanning outgoing mail,
# use @bypass_spam_checks_acl .
#RE:
# $whitelist_sender_re = new_RE(
# qr'^postmaster@.*\bexample\.com$'i,
# qr'^owner-[^@]*@'i, qr'-request@'i,
# qr'\.example\.com$'i );
$blacklist_sender_re = new_RE(
qr'^(bulkmail|offers|cheapbenefits|earnmoney|foryou|greatcasino)@'i,
qr'^(investments|lose_weight_today|market.alert|money2you|MyGreenCard)@'i,
qr'^(new\.tld\.registry|opt-out|opt-in|optin|saveonlsmoking2002k)@'i,
qr'^(specialoffer|specialoffers|stockalert|stopsnoring|wantsome)@'i,
qr'^(workathome|yesitsfree|your_friend|greatoffers)@'i,
qr'^(inkjetplanet|marketopt|MakeMoney)\d*@'i,
#HASH lookup variant:
# NOTE: Perl operator qw splits its argument string by whitespace
# and produces a list. This means that addresses can not contain
# whitespace, and there is no provision for comments within the string.
# You can use the normal Perl list syntax if you have special requirements,
# e.g. map {...} ('one user@bla', '.second.com'), or use read_hash to read
# addresses from a file.
# a hash lookup table can be read from a file,
# one address per line, comments and empty lines are permitted:
# read_hash(\%whitelist_sender, '/var/amavis/whitelist_sender');
# ... or set directly:
# $whitelist_sender{''} = 1; # don't spam-check MTA bounces
map { $whitelist_sender{lc($_)}=1 } (qw(
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
returns.groups.yahoo.com
# ENVELOPE SENDER WHITELISTING / BLACKLISTING - PER-RECIPIENT
# The same semantics as for global white/blacklisting applies, but this
# time each recipient (or its domain, or subdomain, ...) can be given
# an individual lookup table for matching senders. The per-recipient lookups
# override the global lookups, which serve as a fallback default.
# Specify a two-level lookup table: the key for the outer table is recipient,
# and the result should be an inner lookup table (hash or ACL or RE),
# where the key used will be the sender.
#$per_recip_blacklist_sender_lookup_tables = {
# '[email protected]'=>new_RE(qr'^(inkjetplanet|marketopt|MakeMoney)\d*@'i),
# '[email protected]'=>[qw( [email protected],org .d2.example,org )],
#$per_recip_whitelist_sender_lookup_tables = {
# '[email protected]' => [qw( [email protected] .other.example.org )],
# '.my1.example.com' => [qw( !foe.other.example,org .other.example,org )],
# '.my2.example.com' => read_hash('/var/amavis/my2-wl.dat'),
# 'abuse@' => { 'postmaster@'=>1,
# '[email protected]'=>1, '[email protected]'=>1 },
# Section VI - Resource limits
# Sanity limit to the number of allowed recipients per SMTP transaction
# $smtpd_recipient_limit = 1000; # (default is 1000)
# Resource limitations to protect against mail bombs (e.g. 42.zip)
# Maximum recursion level for extraction/decoding (0 or undef disables limit)
$MAXLEVELS = 14; # (default is undef, no limit)
# Maximum number of extracted files (0 or undef disables the limit)
$MAXFILES = 1500; # (default is undef, no limit)
# For the cumulative total of all decoded mail parts we set max storage size
# to defend against mail bombs. Even though parts may be deleted (replaced
# by decoded text) during decoding, the size they occupied is _not_ returned
# to the quota pool.
# Parameters to storage quota formula for unpacking/decoding/decompressing
# Formula:
# quota = max($MIN_EXPANSION_QUOTA,
# $mail_size*$MIN_EXPANSION_FACTOR,
# min($MAX_EXPANSION_QUOTA, $mail_size*$MAX_EXPANSION_FACTOR))
# In plain words (later condition overrules previous ones):
# allow MAX_EXPANSION_FACTOR times initial mail size,
# but not more than MAX_EXPANSION_QUOTA,
# but not less than MIN_EXPANSION_FACTOR times initial mail size,
# but never less than MIN_EXPANSION_QUOTA
$MIN_EXPANSION_QUOTA = 100*1024; # bytes (default undef, not enforced)
$MAX_EXPANSION_QUOTA = 300*1024*1024; # bytes (default undef, not enforced)
$MIN_EXPANSION_FACTOR = 5; # times original mail size (must be specified)
$MAX_EXPANSION_FACTOR = 500; # times original mail size (must be specified)
# Section VII - External programs, virus scanners
# Specify a path string, which is a colon-separated string of directories
# (no trailing slashes!) to be assigned to the environment variable PATH
# and to serve for locating external programs below.
# NOTE: if $daemon_chroot_dir is nonempty, the directories will be
# relative to the chroot directory specified;
$path = '/usr/local/sbin:/usr/local/bin:/usr/sbin:/sbin:/usr/bin:/bin';
# Specify one string or a search list of strings (first match wins).
# The string (or: each string in a list) may be an absolute path,
# or just a program name, to be located via $path;
# Empty string or undef (=default) disables the use of that external program.
# Optionally command arguments may be specified - only the first substring
# up to the whitespace is used for file searching.
$file = 'file'; # file(1) utility; use 3.41 or later to avoid vulnerability
$gzip = 'gzip';
$bzip2 = 'bzip2';
$lzop = 'lzop';
$uncompress = ['uncompress', 'gzip -d', 'zcat'];
$unfreeze = ['unfreeze', 'freeze -d', 'melt', 'fcat'];
$arc = ['nomarch', 'arc'];
$unarj = ['arj', 'unarj']; # both can extract, same options
$unrar = ['rar', 'unrar']; # both can extract, same options
$zoo = 'zoo';
$lha = 'lha';
$cpio = 'cpio';
# SpamAssassin settings
# $sa_local_tests_only is passed to Mail::SpamAssassin::new as a value
# of the option local_tests_only. See Mail::SpamAssassin man page.
# If set to 1, no tests that require internet access will be performed.
$sa_local_tests_only = 1; # (default: false)
#$sa_auto_whitelist = 1; # turn on AWL (default: false)
$sa_mail_body_size_limit = 64*1024; # don't waste time on SA if mail is larger
# (less than 1% of spam is > 64k)
# default: undef, no limitations
# default values, can be overridden by more specific lookups, e.g. SQL
$sa_tag_level_deflt = -999; # add spam info headers if at, or above that level
$sa_tag2_level_deflt = 3.0; # add 'spam detected' headers at that level
$sa_kill_level_deflt = 22.0;
#$sa_kill_level_deflt = $sa_tag2_level_deflt; # triggers spam evasive actions
# at or above that level: bounce/reject/drop,
# quarantine, and adding mail address extension
# The $sa_tag_level_deflt, $sa_tag2_level_deflt and $sa_kill_level_deflt
# may also be hashrefs to hash lookup tables, to make static per-recipient
# settings possible without having to resort to SQL or LDAP lookups.
# a quick reference:
# tag_level controls adding the X-Spam-Status and X-Spam-Level headers,
# tag2_level controls adding 'X-Spam-Flag: YES', and editing Subject,
# kill_level controls 'evasive actions' (reject, quarantine, extensions);
# it only makes sense to maintain the relationship:
# tag_level <= tag2_level <= kill_level
# string to prepend to Subject header field when message exceeds tag2 level
$sa_spam_subject_tag = '*** JUNK MAIL ***'; # (defaults to undef, disables)
# (only seen when spam is not to be rejected
# and recipient is in local_domains*)
$sa_spam_modifies_subj = 1; # may be a ref to a lookup table, default is true
# Example: modify Subject for all local recipients except [email protected]
#$sa_spam_modifies_subj = [qw( [email protected] . )];
# @av_scanners is a list of n-tuples, where fields semantics is:
# 1. av scanner plain name, to be used in log and reports;
# 2. scanner program name; this string will be submitted to subroutine
# find_external_programs(), which will try to find the full program
# path name; if program is not found, this scanner is disabled.
# Besides a simple string (full program path name or just the basename
# to be looked for in PATH), this may be an array ref of alternative
# program names or full paths - the first match in the list will be used;
# As a special case for more complex scanners, this field may be
# a subroutine reference, and the whole n-tuple is passed to it as args.
# 3. command arguments to be given to the scanner program;
# a substring {} will be replaced by the directory name to be scanned,
# i.e. "$tempdir/parts"
# 4. an array ref of av scanner exit status values, or a regexp (to be
# matched against scanner output), indicating NO VIRUSES found;
# 5. an array ref of av scanner exit status values, or a regexp (to be
# matched against scanner output), indicating VIRUSES WERE FOUND;
# Note: the virus match prevails over a 'not found' match, so it is safe
# even if 4. matches for viruses too;
# 6. a regexp (to be matched against scanner output), returning a list
# of virus names found.
# 7. and 8.: (optional) subroutines to be executed before and after scanner
# (e.g. to set environment or current directory);
# see examples for these at KasperskyLab AVP and Sophos sweep.
# NOTES:
# - NOT DEFINING @av_scanners (e.g. setting it to empty list, or deleting the
# whole assignment) TURNS OFF LOADING AND COMPILING OF THE ANTIVIRUS CODE
# (which can be handy if all you want to do is spam scanning);
# - the order matters: although _all_ available entries from the list are
# always tried regardless of their verdict, scanners are run in the order
# specified: the report from the first one detecting a virus will be used
# (providing virus names and scanner output); REARRANGE THE ORDER TO WILL;
# - it doesn't hurt to keep an unused command line scanner entry in the list
# if the program can not be found; the path search is only performed once
# during the program startup;
# CORROLARY: to disable a scanner that _does_ exist on your system,
# comment out its entry or use undef or '' as its program name/path
# (second parameter). An example where this is almost a must: disable
# Sophos 'sweep' if you have its daemonized version Sophie or SAVI-Perl
# (same for Trophie/vscan, and clamd/clamscan), or if another unrelated
# program happens to have a name matching one of the entries ('sweep'
# again comes to mind);
# - it DOES HURT to keep unwanted entries which use INTERNAL SUBROUTINES
# for interfacing (where the second parameter starts with \&).
# Keeping such entry and not having a corresponding virus scanner daemon
# causes an unnecessary connection attempt (which eventually times out,
# but it wastes precious time). For this reason the daemonized entries
# are commented in the distribution - just remove the '#' where needed.
@av_scanners = (
# ### http://www.vanja.com/tools/sophie/
# ['Sophie',
# \&ask_daemon, ["{}/\n", '/var/run/sophie'],
# qr/(?x)^ 0+ ( : | [\000\r\n]* $)/, qr/(?x)^ 1 ( : | [\000\r\n]* $)/,
# qr/(?x)^ [-+]? \d+ : (.*?) [\000\r\n]* $/ ],
# ### http://www.csupomona.edu/~henson/www/projects/SAVI-Perl/
# ['Sophos SAVI', \&sophos_savi ],
# ### http://clamav.elektrapro.com/
# ['Clam Antivirus-clamd',
# \&ask_daemon, ["CONTSCAN {}\n", '/var/amavis/clamd'],
# qr/\bOK$/, qr/\bFOUND$/,
# qr/^.*?: (?!Infected Archive)(.*) FOUND$/ ],
# # NOTE: run clamd under the same user as amavisd,
# # match the socket name in clamav.conf to the socket name in this entry
# ### http://www.openantivirus.org/
# ['OpenAntiVirus ScannerDaemon (OAV)',
# \&ask_daemon, ["SCAN {}\n", '127.0.0.1:8127'],
# qr/^OK/, qr/^FOUND: /, qr/^FOUND: (.+)/ ],
# ### http://www.vanja.com/tools/trophie/
# ['Trophie',
# \&ask_daemon, ["{}/\n", '/var/run/trophie'],
# qr/(?x)^ 0+ ( : | [\000\r\n]* $)/, qr/(?x)^ 1 ( : | [\000\r\n]* $)/,
# qr/(?x)^ [-+]? \d+ : (.*?) [\000\r\n]* $/ ],
# ### http://www.f-prot.com/
# ['FRISK F-Prot Daemon',
# \&ask_daemon,
# ["GET {}/*?-dumb%20-archive HTTP/1.0\r\n\r\n",
# ['127.0.0.1:10200','127.0.0.1:10201','127.0.0.1:10202',
# '127.0.0.1:10203','127.0.0.1:10204'] ],
# qr/(?i)<summary[^>]*>clean<\/summary>/,
# qr/(?i)<summary[^>]*>infected<\/summary>/,
# qr/(?i)<name>(.+)<\/name>/ ],
['KasperskyLab AntiViral Toolkit Pro (AVP)', ['avp','kavscanner'],
"-* -P -B -Y -O- {}", [0,3,8], [2,4], # any use for -A -K ?
qr/infected: (.+)/,
sub {chdir('/opt/AVP') or die "Can't chdir to AVP: $!"},
sub {chdir($TEMPBASE) or die "Can't chdir back to $TEMPBASE $!"},
['KasperskyLab AVPDaemonClient',
[ '/opt/AVP/kavdaemon', 'kavdaemon',
'/opt/AVP/AvpDaemonClient', 'AvpDaemonClient',
'/opt/AVP/AvpTeamDream', 'AvpTeamDream',
'/opt/AVP/avpdc', 'avpdc' ],
'{}', [0,8], [3,4,5,6], qr/infected: ([^\r\n]+)/ ],
# change the startup-script in /etc/init.d/kavd to:
# DPARMS="-I0 -Y -* /var/amavis"
# adjusting /var/amavis above to match your $TEMPBASE.
# NOTE: cd /opt/AVP/DaemonClients; configure; cd Sample; make
# cp AvpDaemonClient /opt/AVP/
### http://www.hbedv.com/ or http://www.centralcommand.com/
['H+BEDV AntiVir or CentralCommand Vexira Antivirus',
['antivir','vexira'],
'--allfiles -noboot -nombr -rs -s -z {}', [0], qr/ALERT:|VIRUS:/,
qr/(?x)^\s* (?: ALERT: \s* (?: \[ | [^']* ' ) |
(?i) VIRUS:\ .*?\ virus\ '?) ( [^\]\s']+ )/ ],
# NOTE: remove the -z if you only have a demo version
### http://www.commandsoftware.com/
['Command AntiVirus for Linux', 'csav',
'-all -archive -packed {}', [50], [51,52,53],
qr/Infection: (.+)/ ],
### http://www.symantec.com/
['Symantec CarrierScan via Symantec CommandLineScanner',
['cscmdline','savsecls'],
'-a scan -i 1 -v -s 127.0.0.1:7777 {}',
qr/Files Infected: 0/, qr/^Infected: /,
qr/Info:\s+(.+)/ ],
### http://drweb.imshop.de/
['DrWeb Antivirus for Linux/FreeBSD/Solaris', 'drweb',
'-al -ar -fm -go -ha -ml -ot -sd -up {}',
[0], [1], sub {('no-name')} ],
### http://www.f-secure.com/products/anti-virus/
['F-Secure Antivirus', 'fsav',
'--dumb --archive {}', [0], [3,8],
qr/(?:infection|Infected): (.+)/ ],
['CAI InoculateIT', 'inocucmd',
'-sec -nex {}', [0], [100],
qr/was infected by virus (.+)/ ],
['MkS_Vir for Linux (beta)', ['mks32','mks'],
'-s {}/*', [0], [1,2],
qr/--[ \t]*(.+)/ ],
['MkS_Vir daemon',
'mksscan', '-s -q {}', [0], [1..7],
qr/^... (\S+)/ ],
### http://www.nod32.com/
['ESET Software NOD32', 'nod32',
'-all -subdir+ {}', [0], [1,2],
qr/^.+? - (.+?)\s*(?:backdoor|joke|trojan|virus|worm)/ ],
### http://www.nod32.com/
['ESET Software NOD32 - Client/Server Version', 'nod32cli',
'-a -r -d recurse --heur standard {}', [0], [10,11],
qr/^\S+\s+infected:\s+(.+)/ ],
### http://www.norman.com/products_nvc.shtml
['Norman Virus Control v5 / Linux', 'nvccmd',
'-c -l:0 -s -u {}', [0], [1],
qr/(?i).* virus in .* -> \'(.+)\'/ ],
### http://www.pandasoftware.com/
['Panda Antivirus for Linux', ['pavcl','pavc'],
'-aut -aex -heu -cmp -nor -nso -eng {}',
qr/Number of files infected\.*: 0(?!\d)/,
qr/Number of files infected\.*: 0*[1-9]/,
qr/Found virus :\s*(\S+)/ ],
# Check your RAV license terms before fiddling with the following two lines!
# ['GeCAD RAV AntiVirus 8', 'ravav',
# '--all --archive --mail {}', [1], [2,3,4,You are welcome. I'm glad you got it back up.
(1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
(2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
(3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
(4) Add some SARE rules:
Visit http://www.rulesemporium.com/rules.htm and download the following rules:
70sareadult.cf
70saregenlsubj0.cf
70sareheader0.cf
70sarehtml0.cf
70sareobfu0.cf
70sareoem.cf
70sarespoof.cf
70sarestocks.cf
70sareunsub.cf
72sare_redirectpost
Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
backhair.cf
bogus-virus-warnings.cf
chickenpox.cf
weeds.cf
Copy these rules to /etc/mail/spamassassin/
Then stop and restart mail services.
There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck! -
HDS live streaming to Flash not working
Adobe Flash Media Server 4.5.5 r4013
Windows 2008
Sources:
http://help.adobe.com/en_US/flashmediaserver/devguide/WSd391de4d9c7bd609-52e437a812a3725df a0-8000.html
http://www.adobe.com/devnet/adobe-media-server/articles/live-multi-bitrate-video-http-flas h-ios.html
Live streaming a single or multi-bitrate video over HTTP to Flash does not work. I have followed the instructions on the 2 sources listed above repeatedly, but I can’t get live streaming over HTTP to Flash to work. Live streaming to iOS over HTTP works with no problems (single and multi-bitrate streams).
I have tried the troubleshooting steps from the following:
http://help.adobe.com/en_US/flashmediaserver/devguide/WS0432746db30523c21e63e3d12efac195bd -8000.html
Troubleshoot live streaming (HTTP)
1. Services window (Windows): Flash Media Server (FMS), Flash Media Administration Server, and FMSHttpd services are running. ✓
2. Verified that the request URL is correct. ✓
3. Configured ports:
a. Configure Apache to use port 80. Open rootinstall/Apache2.2/conf/httpd.conf in a text editor. Change the line Listen 8134 to Listen 80.
b. Configure Flash Media Server not to use port 80. Open rootinstall/conf/fms.ini in a text editor. Remove 80 from the ADAPTOR.HOSTPORT parameter so the parameter looks like the following: ADAPTOR.HOSTPORT = :1935 ✓
4. Placed a crossdomain.xml file to the rootinstall/webroot directory. ✓
5. In Flash Media Live Encoder, select the Encoding Options tab, choose Output from the Panel options menu, and verify the following:
a) The value of FMS URL is rtmp://fms-dns-or-ip/livepkgr. If you’re testing on the same server as Flash Media Server, you can use the value localhost for fms-dns-or-ip. ✓
b) For a single stream, the value of Stream is livestream?adbe-live-event=liveevent. ✓
c) For adaptive bitrate streaming, the value of Stream is livestream%i?adbe-live-event=liveevent. ✓
Flash Media Live Encoder uses this value to create unique stream names. To use another encoder, provide your own unique stream names, for example, livestream1?adbe-live-event=liveevent, livestream2?adbe-live-event=liveevent.
The encoder is showing all 3 streams being published and streaming.
6. Check Administration Console: the livepkgr application and the 3 streams are running. ✓
7. Check the logs for errors. Flash Media Server logs are located in the rootinstall/logs folder. The master.xx.log file and the core.xx.log file show startup failures. Apache logs are located in the rootinstall/Apache2.2/logs folder. X
a) core00.log: these errors did not occur every time that I tried playing the live stream but these are the only relevant errors in the logs.
1. 7968 (w)2611179 Warning from libf4f.dll: [Utils] [livestream2] Discarded all queued Media Messages received before first Video Keyframe Message
2. 7968 (w)2611179 Warning from libf4f.dll: [Utils] [livestream3] Discarded all queued Media Messages received before first Video Keyframe Message
b) edge00.log:
13:33:57 4492 (w)2641213 Connection rejected by server. Reason : [ Server.Reject ] : (_defaultRoot_, _defaultVHost_) : Application (hds-live) is not defined. -
c) Apache-Error:
1. [warn] Checking if stream is disabled but bootstrap path in event file is empty for event:livepkgr/events/_definst_/liveevent stream name:livestream
2. [warn] bootstrap path is in event file is empty for event:livepkgr/events/_definst_/liveevent stream name:livestream1
As I mentioned, everything works on iOS and FMS seems to be creating all of the stream segments and meta files:
a. The 3 streams are being created in: HD:\Program Files\Adobe\Flash Media Server 4.5\applications\livepkgr\streams\_definst_
b. FMS is creating the following files in each stream folder (livestream1, livestream2, livestream 3):
1. livestream1.bootstrap
2. livestream1.control
3. livestream1.meta
4. .f4f segments
5. .f4x segments
The appropriate files are also being created in the HD:\Program Files\Adobe\Flash Media Server 4.5\applications\livepkgr\events\_definst_\liveevent folder, in which I have the following Manifest.xml and Event.xml files:
<manifest xmlns="http://ns.adobe.com/f4m/1.0">
<media streamId="livestream1" bitrate="200" />
<media streamId="livestream2" bitrate="500" />
<media streamId="livestream3" bitrate="1000" />
</manifest>
<Event>
<EventID>liveevent</EventID>
<Recording>
<FragmentDuration>4000</FragmentDuration>
<SegmentDuration>16000</SegmentDuration>
<DiskManagementDuration>3</DiskManagementDuration>
</Recording>
</Event>
I’ve tried clearing the contents of both streams\_definst_ and events\_definst_\liveevent (keeping the xml files) after restarting the encoder, and creating a different event definst for the streams (liveevent2 for example).
We have an event in 2 weeks that we would like to stream to both Flash and iOS. Any help in solving this problem will be greatly appreciated.One step closer:
Changed the crossdomain.xml file (more permissive settings).
Changed the encoding on FMLE to vp6. Working somewhat (don't know what I did to make it start streaming through hds).
But at least now I can get the individual streams in the set manifest file to work:
http://localhost/hds-live/livepkgr/_definst_/livevent/livestream1.f4m
http://localhost/hds-live/livepkgr/_definst_/livevent/livestream2.f4m
http://localhost/hds-live/livepkgr/_definst_/livevent/livestream3.f4m
BUT when I try to play the streams through the set manifest file from http://localhost/liveevent.f4m I'm getting the following error:
"The F4m document contains errors URL missing from Media tag." I'll search the forums to see if anyone else has come across this problem.
I used the f4m config tool to make the file. These are the file's contents:
<manifest xmlns="http://ns.adobe.com/f4m/2.0">
<baseURL>http://localhost/hds-live/livepkgr/_definst_/liveevent/</baseURL>
<media href="livestream1.f4m " bitrate="200"/>
<media href="livestream2.f4m " bitrate="500"/>
<media href="livestream3.f4m " bitrate="1000"/>
</manifest>
Thanks -
Weblogic Http Apache Plugin not working
Hi,
I have installed weblogic server 10.3 on WindowsXP Professional and Http Apache 2.2 is running on port 80. I followed the following document to configure the Apache plugin:
http://e-docs.bea.com/wls/docs103/plugins/apache.html
but when I go and test the plugin it always comes back with 404 page not found. As per the documentation I am testing it as
http://localhost:80/weblogic/
Here is my httpd.conf
Include "C:/bea/alui/plumtreeconf/"
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2.2" will be interpreted by the
# server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule weblogic_module modules/mod_wl_22.so
<IfModule mod_weblogic.c>
WebLogicHost localhost
WebLogicPort 7001
</IfModule>
<Location /weblogic>
SetHandler weblogic-handler
PathTrim /weblogic
</Location>
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User daemon
Group daemon
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName localhost:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
ProxyRequests On
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "logs/error.log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "logs/access.log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "logs/access.log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://localhost/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock logs/cgisock
</IfModule>
# "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://localhost/subscription_info.html
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>Is there anything else I need to add to this file. As I am trying to install ALUI and for this I need to add the plugin as when I go to my portal page none of the
images shows. Any help is appreciated.
ThanksHi,
There is patch for the webserver(Apache Plugin),thats needs to be downloaded from Metalink,dont use the default plugin that comes with the weblogic 10.3 installtion.
Regards,
Dinesh
Maybe you are looking for
-
Why does Soundbooth stop immediatly on playback
I have a Mac Pro 2 x 2.26 GHz Quad-Core Intel Xeon with 32 GB memory. I've recently purchased and installed Adobe Master Collection CS4. After loading a mp3 track into Soundbooth CS4, I click the playback control and it stops every time after j
-
Message -- MIME -- Combine Messages
I encountered the text of the subject line in an email that I sent to myself from a copy machine. The copy machine was suppose to scan the pages, convert them to PDF, and send them to my email account. Apparently the PDF attachment was too large for
-
Based on qulity the payment is need to be done to vendor ?
Dear friends, i have a scenario to map, base on Quality parameter(eg, purity, GSM,etc) , after UD, The vendor payments need to be done . please tell me the apporach.
-
In OS 10.5.8 where are the controls or code for...
In OS 10.5.8 where are the controls or code for selecting dragging/moving files and folders copying and pasting kept? Is it part of one of the system apps? Mine do not work any fixing tips?
-
Hi Experts I have created Root Organsiation and Purchase organisation also. 1. Do I have to create Business partnerfor the above Root Organisation in EBP using T.Code BP manually? 2. If yes, then how shall I make it as a CP 3. I am using Plan Driven