Locally check how Endpoint Protection client gets updates

Hi,
I'm in the middle of a large deployment of SCEP (ahem) System Center 2012 Endpoint Protection, and I've come across an interesting question. Is it possible to determine the method the local SCEP client used to obtain it's most recent definitions update?
The background here is that our clients are set to obtain updates from the SCCM server, and only from the Internet as a last resort after 12 hours of failure. However, during one recent deployment, the local team reported a spike in their Internet traffic
and believe several hundred SCEP clients updated via the Internet. Is it possible to verify this locally from log files on the computer or some other method?
This is an issue for some of our locations where Internet bandwidth is at a premium, but we have good internal WAN links.
Kind regards,
Matt

Hi,
We could configure Definition Update sources under Antimalware Policy.
How to Configure Definition Updates for Endpoint Protection in Configuration Manager
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Deploying SCCM EndPoint Protection Client with updates?

Am using SCCM 2012 r2 and need to get the EndPoint Protection Client built int o my image.
If I deploy it post-imaging the laptop, how do I get the latest definitions?
Because it shows up with a red icon in the system tray and I have to go in and manually update the definitions after I install it.
Is there a task that could be done in an OSD to update the definitions?
Otherwise only way I can think of is preinstall and update and get the full scan done before capturing an image of my system to deploy to other systems.

Hi,
If you use Endpoint Protection on all computer including the latest definitions in your Build and Capture saves time.
Otherwise ,the command line in windows works fine ,trigger an update of SCEP at the end of the task sequence:
"%Program Files%\Microsoft Security Client\mpcmdrun.exe" -SignatureUpdate
Here are some great articles for you reference:
Operating System Deployment and Endpoint Protection Client Installation
http://blogs.technet.com/b/configmgrteam/archive/2012/04/12/operating-system-deployment-and-endpoint-protection-client-installation.aspx
How to Configure Definition Updates for Endpoint Protection in Configuration Manager
http://technet.microsoft.com/en-us/library/jj822983.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Endpoint Protection clients no getting updates from SCCM 2012 in new Secondary Site

I recently stood up a secondary site behind a PCI firewall to manage PCI in-scope systems. All of my boundaries are properly configured and there are no overlaps. I am able to push packages to these clients and the clients are reporting as healthy however
I am not able to get updates to the SCEP clients. There is no internet access from these systems so I have to rely on updates from SCCM. From what I can see in the WindowsUpdate log it is only trying to go to Microsoft for the definitions. Here is the Log:
2014-04-30 11:05:09:739
828 da8
Misc WARNING: Send failed with hr = 80072ee2.
2014-04-30 11:05:09:739
828 da8
Misc WARNING: Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <None>
2014-04-30 11:05:09:739
828 da8
Misc WARNING: Send request failed, hr:0x80072ee2
2014-04-30 11:05:09:739
828 da8
Misc WARNING: WinHttp: SendRequestUsingProxy failed for <HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=41&L=en-US&P=&PT=0x7&WUA=7.9.9600.16422>.
error 0x80072ee2
2014-04-30 11:05:09:739
828 da8
Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
2014-04-30 11:05:09:739
828 da8
Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
2014-04-30 11:05:09:739
828 da8
Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
2014-04-30 11:05:09:739
828 da8
SLS FATAL: GetResponse failed with hresult 0x80072ee2...
2014-04-30 11:05:09:739
828 da8
EP FATAL: EP: CSLSEndpointProvider::GetWUClientDataAndInitParser - failed to get SLS data, error = 0x80072EE2
2014-04-30 11:05:09:739
828 da8
EP FATAL: EP: CSLSEndpointProvider::GetEndpointFromSLS - Failed to get client data and init parser, error = 0x80072EE2
2014-04-30 11:05:09:739
828 da8
EP FATAL: Failed to obtain 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL, error = 0x80072EE2
2014-04-30 11:05:09:739
828 da8
Agent WARNING: Failed to obtain the authorization cab URL for service 7971f918-a847-4430-9279-4a52d1efe18d, hr=0
2014-04-30 11:05:09:739
828 da8
Agent FATAL: Caller <NULL> failed to opt in to service 7971f918-a847-4430-9279-4a52d1efe18d, hr=0X80072EE2
2014-04-30 11:05:09:739
828 da8
SLS Retrieving SLS response from server...
2014-04-30 11:05:09:739
828 da8
SLS Making request with URL HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=41&L=en-US&P=&PT=0x7&WUA=7.9.9600.16422
2014-04-30 11:05:30:742
828 da8
Misc WARNING: Send failed with hr = 80072ee2.
2014-04-30 11:05:30:742
828 da8
Misc WARNING: Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <None>
2014-04-30 11:05:30:742
828 da8
Misc WARNING: Send request failed, hr:0x80072ee2
2014-04-30 11:05:30:742
828 da8
Misc WARNING: WinHttp: SendRequestUsingProxy failed for <HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=41&L=en-US&P=&PT=0x7&WUA=7.9.9600.16422>.
error 0x80072ee2
2014-04-30 11:05:30:742
828 da8
Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
2014-04-30 11:05:30:742
828 da8
Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
2014-04-30 11:05:30:742
828 da8
Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
2014-04-30 11:05:30:742
828 da8
SLS FATAL: GetResponse failed with hresult 0x80072ee2...
2014-04-30 11:05:30:742
828 da8
EP FATAL: EP: CSLSEndpointProvider::GetWUClientDataAndInitParser - failed to get SLS data, error = 0x80072EE2
2014-04-30 11:05:30:742
828 da8
EP FATAL: EP: CSLSEndpointProvider::GetSecondaryServicesEnabledState - Failed to get client data and init parser, error = 0x80072EE2
2014-04-30 11:05:30:742
828 da8
Agent   * WARNING: Online service registration/service ID resolution failed, hr=0x80248014
2014-04-30 11:05:30:742
828 da8
Agent   * WARNING: Exit code = 0x80248014
2014-04-30 11:05:30:742
828 da8
Agent *********
2014-04-30 11:05:30:742
828 da8
Agent ** END ** Agent: Finding updates [CallerId = System Center Endpoint Protection (DDEFDD14-250E-4DC8-A0B3-9D667EC5D8EB) Id = 9]
2014-04-30 11:05:30:742
828 da8
Agent *************
2014-04-30 11:05:30:742
828 da8
Agent WARNING: WU client failed Searching for update with error 0x80248014
2014-04-30 11:05:30:742
828 da8
IdleTmr WU operation (CSearchCall::Init ID 9, operation # 99) stopped; does use network; is not at background priority
2014-04-30 11:05:30:742
828 da8
IdleTmr Decremented PDC RefCount for Network to 0
2014-04-30 11:05:30:742
828 da8
IdleTmr Decremented idle timer priority operation counter to 0
2014-04-30 11:05:30:743
576 12c0
COMAPI >>-- RESUMED -- COMAPI: Search [ClientId = System Center Endpoint Protection (DDEFDD14-250E-4DC8-A0B3-9D667EC5D8EB)]
2014-04-30 11:05:30:743
576 12c0
COMAPI   - Updates found = 0
2014-04-30 11:05:30:743
576 12c0
COMAPI   - WARNING: Exit code = 0x00000000, Result code = 0x80248014
2014-04-30 11:05:30:743
576 12c0
COMAPI ---------
2014-04-30 11:05:30:743
576 12c0
COMAPI -- END -- COMAPI: Search [ClientId = System Center Endpoint Protection (DDEFDD14-250E-4DC8-A0B3-9D667EC5D8EB)]
2014-04-30 11:05:30:743
576 12c0
COMAPI -------------
2014-04-30 11:05:30:743
576 1254
COMAPI WARNING: Operation failed due to earlier error, hr=80248014
2014-04-30 11:05:30:743
576 1254
COMAPI FATAL: Unable to complete asynchronous search. (hr=80248014)
The log is from a Server 2012 R2 Client. The only thing I was able to find was this Article which did not resolve my issue. Anyone else encounter anything similar? Any help would be appreciated.
Regards, Evan Mills - Systems Administrator

Every two hours is too aggressive for the ADR. Definitions are only released 2-3 times a day so every 8 hours is what most consider best practice. Is your WSUS sync occurring every two hours as well? If not, then the ADR wouldn't have anything new to pick
up anyway. It's best to set the WSUS sync for every 8 hours and then set the ADR to run after any successful WSUS sync.
So the EP definitions are caching but not installing? What does the WUAHandler.log show? One of my machines shows the following which indicates a successful installation from the ConfigMgr delivered update:
1. Update (Missing): Definition Update for Microsoft Endpoint Protection - KB2461484 (Definition 1.173.933.0) (0a156122-d4f8-4215-9e63-8f0f1e32c9c6, 200)   WUAHandler   4/30/2014 6:49:33 AM   11080 (0x2B48)
Async installation of updates started.   WUAHandler   4/30/2014 6:49:34 AM   11080 (0x2B48)
Update 1 (0a156122-d4f8-4215-9e63-8f0f1e32c9c6) finished installing (0x00000000), Reboot Required? No   WUAHandler   4/30/2014 6:50:23 AM   8664 (0x21D8)
Async install completed.   WUAHandler   4/30/2014 6:50:23 AM   8664 (0x21D8)
Installation of updates completed.   WUAHandler   4/30/2014 6:50:23 AM   11032 (0x2B18)
It sounds like if you set "Check for Endpoint Protection definitions at a specific interval" to 0 then it would prevent the WindowsUpdate.log activity you're seeing when the EP client tries to reach out for updates.

Endpoint Protection Client - definitions couldn't be updated

Am on SCCM 2012 SP2 and have EndPoint protection client deployed to computers during the Task Sequence, and they get the update.
The next day I will try an update from the client's GUI and will get the error "Virus and spyware definitions couldn't be updated".
In the antimalway policy applied to the collection the device is a member of, I indeed have its definition update source set to "Updates from UNC file shares", then in the server path for the UNC, it is set to "\\server.domain.com\D$\sources\Packages\Apps\Microsoft\EP_Definitions\Updates\x86"
which is where the "mpam-fe.exe" and "nis_full/exe" files are.
I have no maintenance windows set on the device collection that this antimalware policy is applied to.

Hi, I just wanted to clarify, I only have the "UNC" path as the option for the source of updates.
I have also verified that in the registry in hklm policies Microsoft AntiMalware that the UNC path is indeed there and I can manually access the path from Start > Run.
I've tried running the Endpoint definitions update manually as an Administrator, and with the Windows Update service in every combo of state I could try, and still nothing (not that I want Endpoint getting updates from the internet anyways).
Not sure what we're looking for in the windowsupdate.log but here are the last few lines before the time I tried running the update. The error from definition update doesn't appear to add anything to this log file.
2014-11-19 18:50:01:854
1012 10a0
Service *************
2014-11-19 18:54:12:693
2068 1398
Misc =========== Logging initialized (build: 7.5.7601.17514, tz: -0600) ===========
2014-11-19 18:54:12:693
2068 1398
Misc = Process: C:\WINDOWS\CCM\CcmExec.exe
2014-11-19 18:54:12:693
2068 1398
Misc = Module: c:\Windows\system32\wuapi.dll
2014-11-19 18:54:12:693
2068 1398
COMAPI FATAL: Unable to connect to the service (hr=80070422)
2014-11-19 18:54:12:693
2068 1398
COMAPI WARNING: Unable to establish connection to the service. (hr=80070422)
2014-11-19 18:54:33:507
2068 1098
COMAPI FATAL: Unable to connect to the service (hr=80070422)
2014-11-19 18:54:33:507
2068 1098
COMAPI WARNING: Unable to establish connection to the service. (hr=80070422)

Upgraded SCCM 2012 SP1 to CU5 - Problem updating Endpoint Protection Client (to V4.5.216.0)

We upgraded SCCM SP1 to CU5. We got one primary site, on which we had no problems with running the CU setup. After the upgrade we pushed the new administrator console and client.
SP1 CU5 - console update -> Updated on all administrator users (50 computers)
SP1 CU5- x64 and x86 client update -> Updated on pilot group (50 computers)
No problems so far.
We are having troubles updating the Endpoint Protection Client version. This was V4.1.522.0 before the upgrade. When we enroll a new computer, it receives the new V4.5.216.0, which is the last version.
But we can't update our older clients. We try to deploy the software update (Update for Forefront Endpoint Protection 2010 Client - 4.5.216.0 (KB2952678)) but it doesn't install. After 20 minutes, if I look in the Deployment logs, it says the installation
was successfull; but it isn't, it's still the old version.
Strange thing is, we can upgrade to an inbetween version (Update for Forefront Endpoint Protection 2010 Client - 4.3.215.0 (KB2864366)). Which installs on a test client.
If I look to the cache files of the new EP Client update, and use the UpdateInstall.exe manually, the update does install. Then I see in the logfile EndpointProtectionAgent.log it still refers to the version 4.1.522.0.
EP 4.5.216.0 is installed, version is higher than expected installer version 4.1.522.0. EndpointProtectionAgent 13/01/2015 14:54:00 7808 (0x1E80)
Re-apply EP AM policy. EndpointProtectionAgent 13/01/2015 14:54:00 7808 (0x1E80)
Apply AM Policy. EndpointProtectionAgent 13/01/2015 14:54:00 7808 (0x1E80)
Create Process Command line: "c:\Program Files\Microsoft Security Client\\ConfigSecurityPolicy.exe" "C:\Windows\CCM\EPAMPolicy.xml". EndpointProtectionAgent 13/01/2015 14:54:00 7808 (0x1E80)
Applied the C:\Windows\CCM\EPAMPolicy.xml with ConfigSecurityPolicy.exe successfully. EndpointProtectionAgent 13/01/2015 14:54:02 7808 (0x1E80)
Save new policy state 1 to registry SOFTWARE\Microsoft\CCM\EPAgent\PolicyApplicationState EndpointProtectionAgent 13/01/2015 14:54:02 7808 (0x1E80)
State 1 and ErrorCode 0 and ErrorMsg and PolicyName Antimalware Policy and GroupResolveResultHash D277339FA77A9017801399D96266BAD42DE74F38 is NOT changed. EndpointProtectionAgent 13/01/2015 14:54:02 7808 (0x1E80)
Skip sending state message due to same state message already exists. EndpointProtectionAgent 13/01/2015 14:54:02 7808 (0x1E80)
Firewall provider is installed. EndpointProtectionAgent 13/01/2015 14:54:02 7808 (0x1E80)
Installed firewall provider meet the requirements. EndpointProtectionAgent 13/01/2015 14:54:02 7808 (0x1E80)
This is the WindowsUpdate.log when I try to push the new EP client.
2015-01-14 11:24:13:651 7416 1c44 Handler :::::::::
2015-01-14 11:24:13:651 7416 1c44 Handler : Updates to install = 1
2015-01-14 11:24:21:716 7416 1c44 Handler : WARNING: Command line install completed. Return code = 0x8004ff25, Result = Failed, Reboot required = false
2015-01-14 11:24:21:716 7416 1c44 Handler : WARNING: Exit code = 0x8024200B
2015-01-14 11:24:21:716 7416 1c44 Handler :::::::::
2015-01-14 11:24:21:716 7416 1c44 Handler :: END :: Handler: Command Line Install
2015-01-14 11:24:21:732 7416 1c44 Handler :::::::::::::
2015-01-14 11:24:21:794 1096 c18 Agent *********
2015-01-14 11:24:21:794 1096 edc AU Can not perform non-interactive scan if AU is interactive-only
2015-01-14 11:24:21:794 1096 c18 Agent ** END ** Agent: Installing updates [CallerId = CcmExec]
2015-01-14 11:24:21:794 1096 c18 Agent *************
2015-01-14 11:24:21:794 2296 fac COMAPI >>-- RESUMED -- COMAPI: Install [ClientId = CcmExec]
2015-01-14 11:24:21:794 2296 fac COMAPI - Install call complete (succeeded = 0, succeeded with errors = 0, failed = 1, unaccounted = 0)
2015-01-14 11:24:21:794 2296 fac COMAPI - Reboot required = No
2015-01-14 11:24:21:794 2296 fac COMAPI - WARNING: Exit code = 0x00000000; Call error code = 0x80240022
2015-01-14 11:24:21:794 2296 fac COMAPI ---------
2015-01-14 11:24:21:794 2296 fac COMAPI -- END -- COMAPI: Install [ClientId = CcmExec]
2015-01-14 11:24:21:794 2296 fac COMAPI -------------
2015-01-14 11:24:21:794 1096 1620 AU Can not perform non-interactive scan if AU is interactive-only
2015-01-14 11:24:26:739 1096 1424 Report REPORT EVENT: {ED287668-4BEF-46FD-BB57-CA17680E5D3B} 2015-01-14 11:24:21:732+0100 1 182 101 {A90C3005-7B59-4268-8B11-12D9BE5C8EA0} 201 80070643 CcmExec Failure Content Install Installation Failure: Windows failed to install the following update with error 0x80070643: Update for System Center Endpoint Protection 2012 Client - 4.5.216.0 (KB2952678).
2015-01-14 11:24:27:207 1096 1424 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2015-01-14 11:24:27:207 1096 1424 Report WER Report sent: 7.5.7601.17514 0x80070643 A90C3005-7B59-4268-8B11-12D9BE5C8EA0 Install 101 Managed
2015-01-14 11:24:27:207 1096 1424 Report CWERReporter finishing event handling. (00000000)
Thanks in advance!

Hello,
According to
kb2952678:
To apply this update, you must have one of the following installed:
System Center 2012 R2 Configuration Manager Cumulative Update 4 for System Center 2012
Configuration Manager Service Pack
Service Pack 2 for System Center Configuration Manager 2007 and Update Rollup 1 for
Forefront Endpoint Protection 2010
Do you have Update Rollup 1 for Forefront Endpoint Protection 2010?
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Best practice to run Microsoft Endpoint Protection client in VDI environment

We are using Citrix XenDesktop VDI environment. Symantec Endpoint Protection client (VDI performance optimised) has been installed on the “streamed to the clients” virtual machine image. Basically, all the files (in golden image) have been “tattooed” with
Symantec signature. Now, when the new VM starts, Symantec scan engine simply ignores “tattooed” files and also randomise scan times. This is a rough explanations but I hope you’ve got the idea.
We are switching from Symantec to Microsoft Endpoint Protection and I’m looking for any information and documentation in regards best practice for running Microsoft Endpoint Protection clients in VDI environment.
Thanks in advance.

I see this post is a bt old but the organization I'm with has a very large VDI deployment using VMware. We also are using SCEP 2012 for the AV.
Did you find out what you were looking for or did you elect to take a different direction?
We install SCEP 2012 into the base image and manage the settings using GPO and the updates for defs are through the normal route.
Our biggest challenge is getting alert message from the client.
Thanks

Endpoint Protection Client Activity Log

Hello
I'd like to know how long SCCM 2012 keep the Endpoint protection client activity logs (logs of scan,detection, quarantine..etc) and if i can change it?
thanx

HI,
Endpoint Protection history data is deleted after 365 days, it can be controlled in the Site Maintenance task "Endpoint Protection is Delete Aged Endpoint Protection Health Status History Data"
There is also a setting for "Delete Aged Threat Data" which is set to 30 days. It depends on which level of details you are after but it sounds like you should increase the "Delete Aged Threat Data"
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

How the consumption valuse gets updated in the table MVER

Hi,
Can anyone explain me how the consumption value gets updated in the table?
Would you please be able to confirm that all movement types are considered for updates in table MVER. If not, i would need the movement types that are considered as pertaining to u2018consumptionu2019.
Thanks
Srini

Hi,
Consumption both in material master view and table MVER are updated as soon as the movement is made, ie, real time data.
To see the movements relevant to consumption, use OMJJ to review movement types or table T156. In this table, select Consumpt.postg. field not equal to blank (so blank is excluded).
This should then show all movement types subject to consumption posting. The likely ones to see are below, with majority being G.
(blank)     No consumption update
G     Planned withdrawal (total consumption)
R     Planned, if ref. to reservation, otherwise unplanned
U     Unplanned withdrawal (unplanned consumption)
Thanks.

Why is KB2884678 Endpoint Protection Client Update Expired?

Hi,
KB2884678 Update for System Center Endpoint Protection 2012 suddenly expired in my SCCM Software Update Library. This was just released 10/9/2013. After testing and planned deployment, I was able to install this to the majority of my clients
and servers. However, now it is expired and I am not done yet.
Why did this update suddenly expired on SCCM? Is there something going on? I don't see a replacement either.

Thanks! Although it's a bit confusing because it says it superseded KB2865173 and not mentions 2884678. But you are right. This must be the replacement because 2884678 brings the client to version 4.3 while 2907566 brings
the client to 4.4.
So I guess, do you know by any chance if installing Cumulative Update 3 will upgrade my clients to 4.4 or still 4.3?

Endpoint Protection Client not running run scheduled scan

Hi,
We are running SCCM 2012 R2 CU1 on our site system and clients, having upgraded from SCCM 2012 sp1 12 months ago.
A few of our clients will not run a scheduled scan, even though it displays the Scan date and time in the client properties.
Someome did create a new EP policy and pointed the clients at it, but that didn't fix this problem.
The AV engine and AV definitions are upto date and the real time monitor is running.
In the SCCM console, Active Clients at Risk, the client has Endpoint Protection Enabled showing as Disabled, nothing in the Endpoint Protection Engine Version, nothing for Last Full Scan Start Time, Endpoint Protection Pending Full Scan - No.
The MPLog-xxxx-xxx.log shows:
Signature updated on 02-11-2015 05:57:13
Product Version: 4.7.205.0
Service Version: 4.7.205.0
Engine Version: 1.1.11302.0
AS Signature Version: 1.191.4588.0
AV Signature Version: 1.191.4588.0
2015-02-11T05:57:15.492Z IWscAVStatus::UpdateStatus() succceeded writing instance with state (1) and up-to-date state(1)
2015-02-11T05:57:15.492Z IWscASStatus::UpdateStatus() succceeded writing instance with state (1) and up-to-date state(1)
2015-02-11T05:57:40.982Z Process scan (postsignatureupdatescan) started.
2015-02-11T05:57:50.420Z Process scan (postsignatureupdatescan) completed.
2015-02-11T06:06:47.173Z AutoPurgeWorker triggered with dwWork=0x3
2015-02-11T06:06:47.173Z Product supports installmode: 0
2015-02-11T06:06:47.173Z Task(Scan -ScheduleJob -RestrictPrivileges) is scheduled to run in 604800000(ms) from now with period 21957080(ms)
2015-02-11T06:06:47.173Z Task(SignatureUpdate -ScheduleJob -RestrictPrivileges) is scheduled to run in 28800000(ms) from now with period 28800000(ms)
2015-02-11T06:06:47.173Z Task(Scan -ScheduleJob -RestrictPrivileges -ScanType 2) is scheduled to run in 86400000(ms) from now with period 70114864(ms)
2015-02-11T06:06:47.844Z Detection State: Finished(0) Failed(0) CriticalFailed(0) Additional Actions(0)
The EndpointProtectionAgent.log shows:
Endpoint is triggered by message. EndpointProtectionAgent 11/02/2015 12:12:00 2692 (0x0A84)
File C:\WINDOWS\ccmsetup\SCEPInstall.exe version is 4.5.216.0. EndpointProtectionAgent 11/02/2015 12:12:00 2692 (0x0A84)
EP version 4.7.205.0 is already installed. EndpointProtectionAgent 11/02/2015 12:12:00 2692 (0x0A84)
EP 4.7.205.0 is installed, version is higher than expected installer version 4.5.216.0. EndpointProtectionAgent 11/02/2015 12:12:00 2692 (0x0A84)
Re-apply EP AM policy. EndpointProtectionAgent 11/02/2015 12:12:00 2692 (0x0A84)
Apply AM Policy. EndpointProtectionAgent 11/02/2015 12:12:00 2692 (0x0A84)
Create Process Command line: "c:\Program Files\Microsoft Security Client\\ConfigSecurityPolicy.exe" "C:\WINDOWS\CCM\EPAMPolicy.xml". EndpointProtectionAgent 11/02/2015 12:12:00 2692 (0x0A84)
Applied the C:\WINDOWS\CCM\EPAMPolicy.xml with ConfigSecurityPolicy.exe successfully. EndpointProtectionAgent 11/02/2015 12:12:01 2692 (0x0A84)
Save new policy state 1 to registry SOFTWARE\Microsoft\CCM\EPAgent\PolicyApplicationState EndpointProtectionAgent 11/02/2015 12:12:01 2692 (0x0A84)
State 1 and ErrorCode 0 and ErrorMsg and PolicyName Default Client Antimalware Policy
SCEP Standard Desktop EP Policy and GroupResolveResultHash 5E75089B490B85DD66BBA85BC91E15A5EA853B9C is NOT changed. EndpointProtectionAgent 11/02/2015 12:12:01 2692 (0x0A84)
Skip sending state message due to same state message already exists. EndpointProtectionAgent 11/02/2015 12:12:01 2692 (0x0A84)
Firewall provider is installed. EndpointProtectionAgent 11/02/2015 12:12:01 2692 (0x0A84)
Installed firewall provider meet the requirements. EndpointProtectionAgent 11/02/2015 12:12:01 2692 (0x0A84)
Could anyone provide any pointers on why the scheduled scan wont work?
Jaz

Hi,
Please verify if any GPO applied and overwrite the setting, you can check registry key:
http://blogs.technet.com/b/mspfe/archive/2013/11/13/system-center-configuration-manager-2012-scep-policy-behavior.aspx
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Forefront Endpoint Protection Client filling OS drive with scan and definition files.

I have installed FEP on our client servers, one of server filling C: drive space with scan files (.bin.xx) and with definitions. Why its not clearing like other servers? Please suggest!
We haven't using it through SCCM, we have only FEP client which download updates directly from Internet.
Thanks in advance.

Hi,
Please check the logs below to see if there is any error.
%allusersprofile%\Microsoft\Microsoft Antimalware\Support—Log files specific for the antimalware service
%allusersprofile%\Microsoft\Microsoft Security Client\Support—Log files specific for the SCEP client software
%windir%\WindowsUpdate.log—Windows Update log files, which include information about definition updates
%windir%\CCM\Logs\EndpointProtectionagent.log – Shows Endpoint version and policies applied
%windir%\temp\MpCmdRun.log – Activity when performing scans and signature updates
%windir%\temp\MpSigStub.log – Update progress for signature and Engine updates
Reference:http://kickthatcomputer.wordpress.com/2014/03/04/endpoint-protection-log-locations/
Note: Microsoft provides third-party contact
information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce

Report to show Endpoint Protection last time updated?

Hello,
I am trying to create a report to show the Endpoint Protection version and the last time it updated. I found this page of different views but non of them include last update:
http://technet.microsoft.com/en-us/library/dn581986.aspx
Does anyone know a way of doing this or is it not possible?
Thanks

For Custom End Point Report, You can check below link
http://blogs.technet.com/b/configmgrteam/archive/2012/03/28/building-custom-endpoint-protection-reports-in-system-center-2012-configuration-manager.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

SCCM 2012 R2: Forefront Endpoint protection via automatic updates only work when manually triggering automatic updat rule

Hi,
I followed this manual to configure forefront endpoint protection on clients: http://www.windows-noob.com/forums/index.php?/topic/6106-using-system-center-2012-configuration-manager-part-6-adding-the-endpoint-protection-role-configure-alerts-and-custom-antimalware-policies/
Now in short: everything works fine ... as long as I trigger the audomatic deployment rules.
Current situation:
1. ADR ran fine (3:30 this night)
2.Software update group is NOT ok
3.I run ADR manually (right click on ADR, run)
4.software update group is ok (green icon)
Then virusupdates are succesfull. This means that clients only update their virus definitions when I manually run the ADR-rule.
I'm missing something here.
Please advise.
J.
Jan Hoedt

Probably this issue: http://social.technet.microsoft.com/Forums/en-US/c6109678-785b-4c6d-9cb4-c9dfc1e34b2e/sccm-2012-automatic-deployment-rule-not-executing-updates-for-scep?forum=configmanagerapps
Iow: wsus updates were scheduled at 3, automatic update rules at 3:15, probably sync wasn't done yet so it doesn't find updates. "The day after" updates are marked as expired.
Jan Hoedt

Forefront Endpoint Protection Definitions Not Updated via SCCM (SCCM 2012 SP1)

Hi All
We have an issue of FEP definitions not updating correctly.
1. Clients getting definitions updates from the internet, not SCCM. Any solution?
2. Currently, we have around 20 workstations installed with FEP but having more than 7 different definitions versions within those. Waited for a couple of days but still not updating.. kind of random.
Any advice where to check or what is to be done?
Regards,
Xavier

(Assuming you are using ConfigMgr 2012)
Part of the Antimalware policy is the tab Definition Updates, in this tab you can define the update location(s). Also, in the normal client settings you can disable the client from going online for their initial definitions.
Make sure you are deploying the latest updates via ConfigMgr (either via an ADR, or a custom Software Update Group).
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

How to train client to update muse

How does one enable client to update a muse website? Thx!

They have two options:
1 - Use In-browser editing for minor updates
2 - Use Muse for bigger updates
If you can provide a bit more information about your situation we might be able to give a more precise answer.

Locally check how Endpoint Protection client gets updates

Similar Messages

Maybe you are looking for