Locally hosted server for Cocomo

The potential for Cocomo for corporate/enterprise
applications is substantial, but many (most) corporations will want
to host the infrastructure behind its firewall for performance,
availability, and security reasons. Are there plans to provide a
mechanism for hosting/license the server-side infrastructure for
enterprise applications?
Thanks,
Rick Bullotta
CTO
Burning Sky Software

Hi Rick,
We recognize that enterprises and government institutions
will have certain requirements that may or may not be met thru
Adobe hosted multi-tenant service. We would be interested in
hearing more about the specific use-case and requirements you have
in mind. Could you please email us at [email protected] so that we
can discuss and understand your requirements in detail.
Thank you,
Varun

Similar Messages

Setting up local testing server for coldfusion 9

I could use some help with this thread in coldfusion forum...
setting up local testing server for coldfusion 9 w dreamweaver on mac
http://forums.adobe.com/thread/773350
thanks

I'm marking this as assumed answered, as you seem to have solved the problem in the other thread.

How to specify Host Server for Replicated Virtual Desktops within RDVH Collection

My question about how to specify Host Server for Replicated Virtual Desktops within Collection.
I know there is a aswered thread on this, but that solution (wait a week) didn't work for me.
So i have 2 servers, RDS01 and RDS02 with both 15 Hyper-V VM's and replicating to eachother. That part works fine.
Now I wanted to make it easy for my users I build a Connection Broker: RDCB
All went fine in that setup, but when I want to add the existing VM's from RDS01 and RDS02 to the collection it just radomly adds running ones and replicated ones.
So both RDS01 and RDS02 have 15 VM's running and 15 replica's in stopped state, but when I look in my collection, it says RDS01 has 23 and RDS02 has 7 VM's. When I add them all, I see he wants to add a lot of stopped states replica's from RDS01 instead of
the running ones from RDS02.
How can I specify which one he should use? Or need I disable replication first, setup the whole RDCB collection thing, and then turn replication back on? Or does Hyper-V replication not work at all when used in a collection?
I hope someone can help out here. I'm googling and trying for 1,5 week now, but i can;t get it right.
Thanks in advance.

Hi Robin,
Thanks for your patience.
After you removed Replication from 1 machine on both RDS01 and RDS02, please restart that machine. After that, please add this machine to the RD collection again to test how the issue goes.
As we know, Hyper-V Replica provides asynchronous replication of Hyper-V virtual machines between two hosting servers. It is simple to configure and does not require either shared storage or any particular storage hardware. Any server workload that can be
virtualized in Hyper-V can be replicated. Replication works over any ordinary IP-based network, and the replicated data can be encrypted during transmission. Hyper-V Replica works with standalone servers, failover clusters, or a mixture of both. The servers
can be physically co-located or widely separated geographically. The physical servers do not need to be in the same domain, or even joined to any domain at all.
Currently, would you please add only running state VMs to the RD CB collection? And would you please capture some screenshots of the error message? Thanks very much for your cooperation.
Best regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How to set up a JSP local host server?

I am trying to set up a local host JSP server, do you know any good youtube or tutorials in general that would help me set up a local host JSP server? Or could you post the steps here and your source (if any).
I am looking for something similar to XAMPP as in this youtube tutorial: http://ca.youtube.com/watch?v=KWRB-maTVyM&feature=rec-fresh However, any help would be greatly appreciated.
By the way, I am very new to JSP and was wondering, XAMPP includes Apache, is Apache a JSP server?
-Direction needed.
Edited by: watwatacrazy on Aug 31, 2008 6:51 AM

You need a Java web container to run JSP/Servlets. A commonly used one is Apache Tomcat. It is not the same as Apache HTTP Server which can only serve static files.
You can find Tomcat here: [http://tomcat.apache.org].
How to install/use it, just check the User Guide: [http://tomcat.apache.org/tomcat-6.0-doc/index.html].

Help, how do i find out the host server for a website i have inherited

hi i inherited responcibilty for a website, simply because
there was noone else avalable. i have dreamweaver cs3, but only
about 2 weeks worth of knowledge and experience. I was given info
ie. ftp address and username etc, so have been able to download the
website to my home computer, and have been making updates, now
however i need to find out more about setting up a test server so i
can use dynamic pages, specifically for collecting form
information, collecting donations and selling art work. i will need
some information from the host server to start with, but am unsure
as how to identify and contact them, can anyone help me please. I
am sure it is rudimentary, but the information is essential.
also as a side note, could anyone tell me how to find out
where the websites domain name is regestered ( other than
contacting the original designer, as that seem quite impossible)
because i get the feeling that if all else fails i may be able to
move the website to another host ( not that i now how yet, or even
how to select or find a host) please let me know if any of my
assumptions are wrong.
Thanking you in advance
J
volunteer.

Hi,
To find out about the host, go to register.com and look up
the domain name.
When it gives you results, it'll say that the name is already
taken, but it
will let you do a 'whois' on it.
Those results can give you some info such as the server DNS.
That may let
you figure out the host.
Sometimes the technical contact in the whois, is the host as
well.
"nsfwebnewbie" <[email protected]> wrote in
message
news:fmo8cf$3l5$[email protected]..
> hi i inherited responcibilty for a website, simply
because there was noone
> else
> avalable. i have dreamweaver cs3, but only about 2 weeks
worth of
> knowledge and
> experience. I was given info ie. ftp address and
username etc, so have
> been
> able to download the website to my home computer, and
have been making
> updates,
> now however i need to find out more about setting up a
test server so i
> can use
> dynamic pages, specifically for collecting form
information, collecting
> donations and selling art work. i will need some
information from the host
> server to start with, but am unsure as how to identify
and contact them,
> can
> anyone help me please. I am sure it is rudimentary, but
the information is
> essential.
> also as a side note, could anyone tell me how to find
out where the
> websites
> domain name is regestered ( other than contacting the
original designer,
> as
> that seem quite impossible) because i get the feeling
that if all else
> fails i
> may be able to move the website to another host ( not
that i now how yet,
> or
> even how to select or find a host) please let me know if
any of my
> assumptions
> are wrong.
>
>
> Thanking you in advance
>
> J
> volunteer.
>
>

Setting up a local ftp server for wireless photo transfers

I am a semi-professional photographer who recently purchased a wireless unit that connects to my camera to transfer my images to my Mac. I have turned on the ftp services under Sharing on my Powermac G5 and set up a user account for the camera to log into. All of the transfers will be on the local side of my router, no outside (Internet) connections.
I can get an IP address for the camera, so I know the connection to the router is ok, however I can not log into the user account on the G5 when ftp is initiated. I keep getting a 'Not Connected to Server' error message.
The connection software on the camera is rather basic. It is ftp only. Do I need to do anything else on my G5 or router to help this along? In the camera, I can specify the IP address of the local ftp server, the account username, and password. Do I need to use passive mode?
Should I use another ftp server program other than the one built into Tiger? The camera company recommends a product called Rumpus, but it is very expensive for my use. Any other suggestions for server software?
Also, is there a way in Tiger to see who is currently logged into user accounts?
Lots of questions, but I am determined to get this to work for me.
Thanks.
Jeff W.

Also, is there a way in Tiger to see who is currently logged into user accounts?
In Terminal just type 'last'. More ways to tell...
http://www.osxfaq.com/tips/unix-tricks/week95/friday.ws
I wonder if ftp might not mean some other file transer protocol like SMB... don't know for sure, but most use FAT16/32, which would need SMB I think.
Try from the Finder... CMD+k, then type in smb://, then the IP of the Camera... or maybe ftp:// plus the IP.
Most ftp programs are more funtional than the built in one... Cyberduck is popular, though I use TransmitX

Do I need to run local DNS server for NAT/DHCP to work?

Hello,
I'm coming across all kinds of explanations how to set up a server for public access, having a static IP and a pointed domain, but I have a dynamic public IP and don't need the server to be accessible through a domain name. I just want all the computers in my office to connect to the web over 1 cable connection. I've used Gateway Setup Assistant to set up NAT and DHCP and DNS and what not, but it didn't work out of the box. After some bootpd.plist fixes I now have DHCP working, it's handing out IP addresses, but all LAN connected machines cannot get onto the web, only the server can.
What am I doing wrong? Should I configure my DNS server differently? Or should it not be on at all, couldn't the local machines use my ISP's DNS servers?
Currently DNS is configured like this:
Settings are:
accept recursive queries from the following networks: localnets
forwarder IP addresses: (empty)
Zones are:
private. primary zone
134.23.24.in-addr.arpa. reverse zone

Though still a valid question for others I guess, I got my DNS working. The network preferences didn't have external DNS servers configured for the local network interface.

Possible to create local "update server" for iOS and apps?

I use the software update server in OSX Server to locally cache updates, which speeds them up dramatically.
Unfortunately, the app store is still fairly slow.
Does anyone know if Apple has implemented the same sort of caching or update server for iOS devices? I think I read that there's a semi-transparent cache if you have an AirPort Extreme in your path to the Internet, but I don't and really couldn't even if I wanted to...
Thanks.

If apple would get thier crap together it is supposed to be there already. It is really ******* me off that there little to no effort from apple to get all of this working PRE OS release. Had this worked properly before the OS update schools across the country would probably not been brought to thier knees. I ended up having to block the entier apple domain to keep District Office online.
Here is apples promise at the iOS launch.
http://www.apple.com/ios/business/
Caching Server 2 supports iOS 7.
By caching purchased content and software updates on a local Mac running OS X Mavericks Server, Caching Server 2 speeds up the download and delivery of content through the App Store, Mac App Store, iTunes Store and iBookstore. Your users get faster downloads of content and updates to their iOS devices directly over your corporate network.

How do I set up a custom (local) Sync server for Firefox 4?

I am having difficulty finding a clear set of instructions on how to set up a custom Sync server for Firefox 4. Most of the information that I can find seems outdated (only mentioning Weave and/or previous versions of Firefox).

The URL you are looking for is https://wiki.mozilla.org/Labs/Weave/Sync/1.1/Setup

Problem in local host setting for webdynpro

Hi,
I configured the webdynpro and now when i click the webdynpro link the page not open but when i given the local host name and program name in the url path its work.but i want to set the automatically host name permenentaly in webdynpro design.

Hi,
Not an expert in the webdynpro.
You can check in RZ11 whether the icm/host_name_full is mainted with fully qualified domain name.
Also you need to make an entry in your local desktop in host file.
Regards,
Vamshi.

Changing Host/Server for an EBS form Load script

I am trying to create load scripts which can be reused. I"m having issues with the New Journals and New Invoices functionality. For some reason I cannot convert or change a load script for either of these processes for a new server (HTTP address). I am able to do this convert for Inquiry of Journals and invoices fine. so it has to be something to do with adding new data. Does anyone have any knowledge or know of any tips for doing this? I really would prefer not having to record multiple scripts, one for each environment.

Just thought I would report back on this as I have managed to test the provisioning script with the 'network profile' option at last:
After using 'network profile' in the networking / interface setup of the boot interface, and running the provisioning script - the following occurs:
1) /etc/dhcpd.conf is updated on the staging server to reflect all MAC addresses entered in
2) The network profile auto allocates hostnames / IP addresses for each MAC address - again these are entered for each host in dhcpd.conf
3) Each host is set to take filename "/pxelinux.0"; even if the path to the boot directory is set to "linux-install/pxelinux.0" in (Infrastructure/Boot configuration) - manual change is required.
So from a dhcpd.conf - it all looked very promising apart from the pxelinux.0 change....
However, after the provisioning install had completed, the hostname did not end up as that which was set in dhcpd.conf - but again - a combination of 'ovs-MAC'.
In addition /etc/hosts on the newly provisioned OVM server was not updated to reflect the host name either. This is a problem as it's very important to have a correctly formatted /etc/hosts for OVM to actually work.
The only good news is that the IP address that was set in the network profile (and set in dhcpd.conf) did end up being the IP of the new OVM servers configuration - so the network profile is actually working.
And the dhcpd.conf file is actually being updated to reflect the auto pattern / iterative hostname naming.
So I don't understand why the IP setting worked, but the hostname did not......
It's not really workable to have your Oracle VM servers hostname set as 'ovs-MAC' - you just can't remember which server is what.... especially as it's not possible to change it afterwards.
Cheers,
Jeff

Setting up local testing server for coldfusion 9 w dreamweaver on mac

Hi All,
I'm rusty at this - need some help...
here's my files on mac-
... Applications/ColdFusion9/wwwroot/main/site1
how do I set the testing server up in DW?
local site ...
/Applications/ColdFusion9/wwwroot/main/site1
testing server
server field - i put...
/Applications/ColdFusion9/wwwroot/main/site1
web URL...
http://localhost:8500/site1/
then I test in browser:
http://localhost:8500/site1/test.cfm
but it fails with : FILE NOT FOUND
but this works but not what i want
http://localhost:8500/site1/test.cfm
I WANT the sub folder also!
What's wrong ?

I think i fixed it.... so please disregard...
was this.........
server field - i put...
/Applications/ColdFusion9/wwwroot/main/site1
web URL...
http://localhost:8500/site1/
now this..... and it works
server field - i put...
/Applications/ColdFusion9/wwwroot/
web URL...
http://localhost:8500/main/site1/

I can't get my email open asking for host server for incoming and outgoing. How do I get these ?

Having trouble getting into email on my iphone. What is the host incoming servier and host outgoing server? I have comcast

I know email is an important form of communication and I would love to help! Please try incoming server settings: mail.comcast.net , port: 110, security: none and outgoing server settings:
smtp.comcast.net , port: 25, security: none. If you are still unsuccessful please contact Comcast as suggested by Ann154. Thank you! ^TB

Creating local test server for PHP / Apache

Hello,
I've downloaded and installed XAMPP for Windows and I'm
trying to get a PHP-based site in Dreamweaver to be able to display
properly in the browsers using the Apache/Linux server environment.
What site settings do I need to setup ? Do I need to move site
location within the Apache server location? I also have IIS setup
and running which uses the localhost/wwwroot, so I don't know to
bypass/re-direct to the php environment.
Any help is appreciated, as you can tell, I'm not real
experienced in setting up servers/locations, etc.
Thanks,
rvanburen

try this
http://www.sebastiansulinski.co.uk/web_design_tutorials/web_server/installing_apache_php_m ysql_a.php

Problem with local host and server...

Hi,
I am facing a problem, I want to update tables that is in my local host server which is now I m using Access , and i want to update my values in server database which is MySQL, is dere any option to do dat...please help me out of dis problem...thanks

Hope this works...
Connection conn = java.sql.DriverManager.getConnection(url, username, password);
Statement stat = conn.createStatement();
int numberOfAffectedRows = stat.executeUpdate("UPDATE table_name
+ " SET column_name = new_value"
+ " WHERE column_name = some_value");

Locally hosted server for Cocomo

Similar Messages

Maybe you are looking for