Locating audio tracks when Importing OMF

I have just imported an OMF from another Logic session. All my audio tracks are in the media folder and all the audio regions are in the session page in their correct places.
But the audio isn't synced up to the regions, is there any way of not doing it manually as I have over 2000 files.
Or is there something I can do when importing the OMF's to make sure this doesn't happen.
I just started a new session straight from the OMF when this happened.
I am now importing the OMF from an open session.
Any advice greatly appreciated

This has been posted by others in the past, there seems to be changes in FCP 5 and/or QuickTime that make its media not fully-readable by earlier revs of FCP.
I would recapture in FCP 3.

Similar Messages

Losing Audio Tracks When importing from 5.1 to 3

I was capturing video on one of the new intel imacs in FCP 5.1. Afterwards I'm importing the files into a project on my powerbook g4 with FCP 3. For some reason I only get 1 audio track when I import the files.
The files on my imac all say 1V and 2A and have the two separate audio tracks. But when I import them on my laptop I get only 1V and 1A. I've tried everything I can think of and changed all the settings I can but can't figure this one out. Can anybody help me?

This has been posted by others in the past, there seems to be changes in FCP 5 and/or QuickTime that make its media not fully-readable by earlier revs of FCP.
I would recapture in FCP 3.

Missing audio track when importing video into Premiere Pro CS3

When I import my M2TS video into the editor there is no audio when viewed in the source. There is also no audio track when I drag a clip down to the timeline. Any fix for this?

I have the same problem with M2TS files in Adobe Premiere Pro CS4. The audio track is there - Adobe Premiere just doesn't recognize it. If you open the same clip in Nero Showtime, Corel Ulead VideoStudio, etc., the audio will be there. The audio is probably multiplexed.
I have been recording High Definition TV using the Hauppauge HD PVR 1212. About 15-20 % of the M2TS files recorded will be seen as video only clips by Adobe Premiere. The remaining clips will be conformed by Premiere and you will have a Dolby Digital 5.1 audio track. If you convert the video only clips to .MP4 and then re-import them into Premiere you will then have the Dolby Digital 5.1 audio track back and you're good to go.
I use either Xilisoft or Arcsoft media converters to change to .MP4 files. If you use Arcsoft you will have to render the clip. The files converted by Xilisoft don't have to be rendered for playback.

Missing audio tracks when importing mp4 movie clip into adobe premier trial

I am trying to sanitize a movie clip by bleeping out the curse words in the clip. However when I import the clip on Adobe, I am missing 3/4 audio tracks; bringing the sound level way down. Can someone please assist me. I've been trying to fix it all morning!!

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

How can I 'join' audio tracks when importing audio book?

HELP!!
In the latest version of iTunes, 11.0.1, I can't find the 'JOIN Tracks' button which is needed when importing an audio CD to keep each disc treated as one book instead of storing each chapter as a separte entry. Without this, I can't find a way to keep the chapters to play in proper order as each CD, starts with chapter 01.
Thank you for your help

Join CD tracks
When you import songs from a CD into iTunes, you can group songs so they always play together (even when you’re shuffling songs).
Insert an audio CD into your computer’s CD or DVD drive, and click No in the window that appears.
When the songs on the CD appear in the iTunes window, hold down the Shift key to select the ones you want to join.
Click near the top-right of the iTunes window, and choose Join CD Tracks.
http://support.apple.com/kb/PH12278

Missing audio tracks when importing raw from my PMW-350

I Have the Sony PMW-350 and i import directly to my computer from my SxS card but when i import it into PP and put it on the time line only one mono track appears and i know there should be at least 4 or more tracks

Works fine for me.
Win 7 CS6.03.
Did it work before?

Why can't I separate audio tracks when I import clips from an sd card into FCP 7

Why Can't I separate audio tracks when I import sd card files into fcp 7?

You need to ask this on the Final Cut Studio forum
http://discussions.apple.com/forum.jspa?forumID=939

Controlling which RED audio tracks to import

Is there any way to control which audio tracks are imported when working with RED R3D files?
This is probably user error, but the company that we use for Red shoots has their camera set up so that the talent audio is on track 2 (with track 1 and 3 being empty, but still active). So I get three mono tracks for each clip I import.

After you import, and before you use any of the clips in a sequence, select them and go to Clip > Modify > Audio Channels. There are a number of options in that dialog for mapping source audio channels as you need.

Why is it that it would take a very long time [if ever] to change or adjust the tempo of a loop in the audio track when i set it to adjust regions to locators? Until now the spinning wheel of death is still very much spinning. thanks for any help. Is th

Why is it that it would take a very long time [if ever] to change or adjust the tempo of a loop in the audio track when i set it to adjust regions to locators? Until now the spinning wheel of death is still very much spinning. thanks for any help.
Is there another way to adjust tempo of loops the faster way, any other technique?

No clue why the final processes have suddenly started to take so long. Two things I'd try: a) capture from an older tape to see if some problem with the new tape is at fault. And b) check the health of your RAM and the hard drive.
The red frame sounds a bit like a glitch we used to have in OnLocation (actually in its predecessor HDV Rack) which was caused by a partial GOP. But that was a product of HDV Rack recording from the live video stream. It turned out that HDV cameras intentionally interrupt the data stream for an instant upon starting to record--specifically to avoid recording a partial GOP to tape. So my gut says that the tape has partial GOPs at the points where you stopped/started recording.

How can I turn off the sound from the original midi or audio tracks when I turned on the duplicate tracks for editing ?

How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

Dan,
It sounds like one of your preferences has changed.
Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
Hope that helps

FAQ: How do I troubleshoot audio issues when importing .MTS files?

Hello. The link FAQ: How do I troubleshoot audio issues when importing .MTS files?
does not work, and i need the answer please. My imported MTS clips are not playing back audio because it seems that no audio imported with the video. Thanks, Don.

Hi there
Audio plays when the object with the audio assigned appears. This is why you hear it when the Button appears.
Try assigning the audio instead to the object that appears when you click the button. Perhaps the caption.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Audio problem when importing video files.

Hello everyone,
I just started using FCP X a few days ago for a university project and I seem to encounter an audio problem when importing videos in .mp4, .mov format or via the import from camera option.
Indeed I need to import videos in .mp4 and .mov format into FCP X. The import in itself is normal I can see my videos into the events/clips library and if I play them from the library I can hear the sound quite perfectly.
However, when I want to edit my videos and put it in the timeline, there is no audio. As a result I started to think that my videos could be the problem so I tried the option "import from camera" option using the Isight camera of my macbook pro but the same things happened. I could hear the sound from the events/clips library but not from the timeline (I can't see any audiowaves in the timeline).
I found a solution using quicktime and extracting the audio of the video in .m4a then importing the videos files and the audi files corresponding but it's a long process and a waste of time as FCP X should be able to import the audio of my video into the timeline directly. Especially if it can read it from events/clips library.
I hope I explained myself clearly and you could help me resolve my problem.
Cheers
Christophe
PS: I'm using FCP X version 10.0

Update to 10.0.5.
You have an incorrect setting when you edit. Try trashing your preferences. Post screen shots of your timeline and toolbar.

Different Audio Tracks when you import DVD VOB Files

I imported some vob files from a dvd and it only gives me the first audio track in premiere but i need the 2nd audio track. How do i tell premiere i only want the 2nd track?

function(){return A.apply(null,[this].concat($A(arguments)))}
Colin Brougham wrote:
... would like to know for the future how to resolve this issue.
If there is no way to get the 2nd audio track then i would consider that to be a bug that hopefully Adobe can fix in next patch.
Ideally when you import a vob fileset premiere should automatically drop all the audio tracks into the timeline, not just the first one.
Don't use a DVD, plain and simple. The fact that we can edit this stuff at all is just a handy shortcut that works most of the time. I suspect that, given the nature of the material and the far greater precedence for native editing of professional camera sources, this is about as good as its going to get. You can certainly report it as a bug (which its not) or request it as a feature, but I sincerely doubt that this would be given a great deal of priority.
I'm not saying this just to be a jerky naysayer: the fact is that there is limited time and resources that go into development of each point release and each full version, and the things that benefit the most people have the greater likelihood of being fixed or included. I'd be surprised if even 1% of Premiere users needed this functionality. Believe me--I've wanted dozens of things that I know won't ever make it into the program, simply because they won't benefit many people. But make a feature request and see what happens...
wow?? what a terrible, mean, and unnecessary negative response? "jerky naysayer" ?? never heard that term, but it sounds accurate.
Thats like walking up to someone and saying "i dont mean to be cruel, but your fat and ugly"
anyways, not sure what your point is, other than you have a crystal ball that tells you less than 1% of the premiere users in the world ever need to grab a b-roll from a dvd and i think i could find plenty of people who would disagree with you. I have been doing digital video editing for 20 years and been using premiere for about 15 years now i think since it first came out. I work at a tv station with lots of other video editors and we have all needed to pull a clips off dvd's many times in our lives. Im sorry that i dont have an XDCAM HD video tape of the first moon launch to capture, so for now i have to grab a clip from a dvd.
Thanks for your attempted "help" but i'd rather you not hiijack my thread by negating my questions and requests. My company has purchased probably over a million dollars in adobe software licenses over the years and there is nothing wrong with my opinions and requests.
thanks

How do I add/import multiple audio tracks when adding a video to the Elements timeline?

I have 2 audio tracks that have been made, but only 1 is being brought in. ( It is a .Ts video file that is from Hauppauge Capture and it has game play audio and commentary audio that is being over-layed.) They are written as separate audio tracks but when imported into Premier only 1 of the 2 are being brought in. Is there a way to bring in both files?

pinhead276
It is my recollection that we had a similar question a little while ago on this question. I do not recall the outcome. My first impression "it is what it is", but I am trying to dust off my memory to make sure that the user did not come up with a unique way to workaround the situation. I will start searching for the thread that I think that I remember.
If you find the thread first, please post and let us know.
More later.
ATR

No audio tracks when sending from Final Cut?

Hi,
I'm working with a 90 minute edited sequence in final cut that I've nested in another sequence to create a continuous video with a stereo audio track. When I send it to soundtrack (multitrack project) for mixing, the video is there but the audio tracks are blank.
Does any one know why this is happening or have suggestions as to what I might do differently?
Thanks in advance.

I ended up exporting the sequence inside my nested sequence and that worked as it should.
But all of my audio tracks were given their own track in Soundtrack which wasn't what I wanted. Finally I exported my nested sequence "for soundtrack" and applied the effects and filters to the resulting file's audio tracks and saved it. I then imported the file back into FCP, put it in a sequence and made any adjustments that I needed before exporting it with compressor.
I don't know if this applies to what you need to do but I hope it's helpful.
Trevor

Locating audio tracks when Importing OMF

Similar Messages

Maybe you are looking for