Locating drivers for Imac 24" (Early 2008) to work with Vista 32 bit

Hi all. I'm really having trouble with my Mac and was wondering if anyone has an alternative.
I have an Apple iMac "Core 2 Duo" 2.8 24-Inch (Early 2008) running OSX 10.5.8. I recently partition my hard disk using Bootcamp and installed Windows Vista 32 bit.
This is where the problem starts. I misplaced the driver DVD's that came with the mac and i am in dire need of the drivers especially for the video card (ATI Radeon HD 2600 pro). I was able to download the drivers for the video card but, anytime i try to install or play a game for example, Call of Duty 4: Modern Warfare it always give me a error that no drivers were found and the game crashes.
Has anyone else encountered this problem?
Does the Apple website provide drivers for Imac 24" drivers for Windows Vista 32 bit?

Patrick,
Welcome to Apple Discussions.
You will either need to find your install discs that came with the computer or contact Apple and they will replace them for a nominal charge.
Going forward keep these and other original installation media in a safe place.
Regards,
Roger

Similar Messages

  • How can I make a recovery disk for an imac 24 "  early 2008 to April 2009 or connect via thunderbolt to another imac

    How can I make a recovery disk for an imac 24 "  early 2008 to April 2009 or connect via thunderbolt to another imacimac 24 "   or connect via thunderbolt to another imac
    ann

    You will only know about the hard drive when you try to access it in TDM from your other computer. If you cannot boot into TDM mode or if the drive does not appear on the new computer's Desktop then it is likely bad.
    What you are thinking about as a recovery disk is the Recovery HD normally created when you install Lion or later on the computer. You boot from it as follows:
    Boot Using Command+R keys:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the
          "COMMAND" and the "R" keys together.
      3. Release the keys when the Utilities Menu appears.

  • Cinema Display 27" with iMac 24" Early 2008

    I want to connect my Cinema Display 27" to an iMac 24" Early 2008. I recently bought two adapters, one from Mini DisplayPort to DisplayPort and another one from DisplayPort to Mini-DVI. Unfortunately they won't work together. Before I continue buying more adapters I wanted to ask here, if anyone has any experience with this combination and can recommend working adapters to me. Thanks in advance.

    I've seen offers on the web for services which will replace one graphics card for another in an iMac. You pay for the hardware and the service, and the service... ain't cheap... because it's not a trivial operation. I would never spend the money to have this done, because there will still be no certainty that things won't go kah-blooey later.
    I sympathize. The iMac I'm currently using blew out its logic board two years into its three-year AppleCare warranty. It was replaced at no cost to me, of course, but as you pointed out in the case of your iMac, this was a well-known issue. And if it were to happen now, I'd be SOL because my iMac is now almost a full year out of its warranty.
    On the other hand, I've held onto this iMac as my main desktop for a long time, much longer than I have for any computer in the past. 3-4 years is a good long time for a mostly-not-upgradeable all-in-one machine so I won't shed too many tears if that problem repeats (although of course I hope it doesn't). You've gotten three years plus out of your iMac, and while it might be tempting to pay for a repair, it might be better to just yank the resellable components (hard drive, RAM, etc.) and purchase a replacement Mac.
    If you decide to go for the repair, you might find a sympathetic ear at your local Apple Store, if you come armed with some evidence that this component commonly fails and remain polite but firm. If you're lucky, they'll do the repair at no cost. Hope for the best, but expect nothing.

  • Imac 24 early 2008 kernel panic continously 10.9.1

    Hi all,
    since few week my imac 24 early 2008 goes in kernel panic continously, this is the log.
    Someone can help me to solve?
    System is OS X 10.9.1 and I have no made changes of RAM or other components.
    Thanks to all.
    Anonymous UUID:       576B60D2-7DCB-B2D4-9B56-552A0D3AA5A6
    Tue Jan 14 19:35:29 2014
    panic(cpu 0 caller 0xffffff8008cdc19e): Kernel trap at 0xffffff8008cd5fe2, type 13=general protection, registers:
    CR0: 0x0000000080010033, CR2: 0x00000000000ff000, CR3: 0x00000000b6344000, CR4: 0x0000000000000660
    RAX: 0x0000000000000001, RBX: 0x0000000000000000, RCX: 0xffffff8008fdd160, RDX: 0x0000000000000000
    RSP: 0xffffff8010e6be48, RBP: 0xffffff8010e6be80, RSI: 0x0000000000000000, RDI: 0x0000000000000000
    R8:  0xffffff801a961ac0, R9:  0x0000000000000000, R10: 0xffffff8010e6bdc0, R11: 0xffffffffffffffff
    R12: 0x000000000000001e, R13: 0xffffff8008c3b550, R14: 0xffffff801a9618a0, R15: 0x0000000000000000
    RFL: 0x0000000000010082, RIP: 0xffffff8008cd5fe2, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x00000000000ff000, Error code: 0x0000000000000000, Fault CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff807c1a1c50 : 0xffffff8008c22f69
    0xffffff807c1a1cd0 : 0xffffff8008cdc19e
    0xffffff807c1a1ea0 : 0xffffff8008cf3606
    0xffffff807c1a1ec0 : 0xffffff8008cd5fe2
    0xffffff8010e6be80 : 0xffffff8008c3b7e3
    0xffffff8010e6bee0 : 0xffffff8008c3bab2
    0xffffff8010e6bf20 : 0xffffff8008fdd4a9
    0xffffff8010e6bf60 : 0xffffff800903db67
    0xffffff8010e6bfb0 : 0xffffff8008cf3af8
    BSD process name corresponding to current thread: Opera Helper EH
    Boot args: arch=x86_64
    Mac OS version:
    13B42
    Kernel version:
    Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
    Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
    Kernel slide:     0x0000000008a00000
    Kernel text base: 0xffffff8008c00000
    System model name: iMac8,1 (Mac-F227BEC8)
    System uptime in nanoseconds: 562570775975
    last loaded kext at 515591684459: com.apple.filesystems.smbfs          2.0.0 (addr 0xffffff7f8af40000, size 335872)
    last unloaded kext at 334657292257: com.apple.filesystems.msdosfs          1.9 (addr 0xffffff7f8af40000, size 57344)
    loaded kexts:
    com.parallels.kext.vnic          9.0 23036.915397
    com.parallels.kext.netbridge          9.0 23036.915397
    com.parallels.kext.hidhook          9.0 23036.915397
    com.parallels.kext.hypervisor          9.0 23036.915397
    com.parallels.kext.usbconnect          9.0 23036.915397
    com.asix.driver.moschipUsbEthernet          1.1.0
    com.apple.filesystems.smbfs          2.0.0
    com.apple.driver.AudioAUUC          1.60
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.filesystems.ntfs          3.11
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleBluetoothMultitouch          80.14
    com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
    com.apple.driver.AppleHDA          2.5.3fc1
    com.apple.GeForceTesla          8.1.8
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleUpstreamUserClient          3.5.13
    com.apple.driver.AppleLPC          1.7.0
    com.apple.driver.AppleBacklight          170.3.5
    com.apple.driver.AppleMCCSControl          1.1.12
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleHWAccess          1
    com.apple.driver.AppleIRController          325.7
    com.apple.iokit.SCSITaskUserClient          3.6.0
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          35
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.4.0
    com.apple.driver.AppleUSBHub          650.4.4
    com.apple.driver.AirPortBrcm43224          700.36.24
    com.apple.iokit.AppleYukon2          3.2.3b1
    com.apple.driver.AppleAHCIPort          2.9.5
    com.apple.driver.AppleFWOHCI          4.9.9
    com.apple.driver.AppleIntelPIIXATA          2.5.1
    com.apple.driver.AppleUSBUHCI          650.4.0
    com.apple.driver.AppleUSBEHCI          650.4.1
    com.apple.driver.AppleRTC          2.0
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleACPIButtons          2.0
    com.apple.driver.AppleSMBIOS          2.0
    com.apple.driver.AppleACPIEC          2.0
    com.apple.driver.AppleAPIC          1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
    com.apple.nke.applicationfirewall          153
    com.apple.security.quarantine          3
    com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
    com.apple.kext.triggers          1.0
    com.apple.driver.IOBluetoothHIDDriver          4.2.0f6
    com.apple.driver.AppleMultitouchDriver          245.13
    com.apple.iokit.IOSerialFamily          10.0.7
    com.apple.driver.DspFuncLib          2.5.3fc1
    com.apple.vecLib.kext          1.0.0
    com.apple.iokit.IOAudioFamily          1.9.4fc11
    com.apple.kext.OSvKernDSPLib          1.14
    com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.nvidia.classic.NVDANV50HalTesla          8.1.8
    com.apple.nvidia.classic.NVDAResmanTesla          8.1.8
    com.apple.driver.AppleHDAController          2.5.3fc1
    com.apple.iokit.IOHDAFamily          2.5.3fc1
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.driver.AppleSMBusController          1.0.11d1
    com.apple.driver.IOPlatformPluginFamily          5.5.1d27
    com.apple.iokit.IOSurface          91
    com.apple.iokit.IOBluetoothFamily          4.2.0f6
    com.apple.driver.AppleSMC          3.1.6d1
    com.apple.iokit.IONDRVSupport          2.3.6
    com.apple.iokit.IOGraphicsFamily          2.3.6
    com.apple.iokit.IOUSBHIDDriver          650.4.4
    com.apple.driver.AppleUSBMergeNub          650.4.0
    com.apple.driver.AppleUSBComposite          650.4.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.0
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOATAPIProtocolTransport          3.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
    com.apple.iokit.IOUSBUserClient          650.4.4
    com.apple.iokit.IO80211Family          600.34
    com.apple.iokit.IONetworkingFamily          3.2
    com.apple.iokit.IOAHCIFamily          2.6.0
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IOATAFamily          2.5.2
    com.apple.iokit.IOUSBFamily          650.4.4
    com.apple.driver.AppleEFINVRAM          2.0
    com.apple.driver.AppleEFIRuntime          2.0
    com.apple.iokit.IOHIDFamily          2.0.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          278.10
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.AppleKeyStore          2
    com.apple.driver.DiskImages          371.1
    com.apple.iokit.IOStorageFamily          1.9
    com.apple.iokit.IOReportFamily          21
    com.apple.driver.AppleFDEKeyStore          28.30
    com.apple.driver.AppleACPIPlatform          2.0
    com.apple.iokit.IOPCIFamily          2.8
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.pthread          1
    com.apple.kec.corecrypto          1.0

    Hi gillian1981,
    Thanks for visiting Apple Support Communities.
    If you are seeing a recurring kernel panic on your iMac, the information and steps in the article below can help troubleshoot the behavior:
    Diagnosing a recurring kernel panic can be difficult. If you need help with this process, consider bringing your Mac to a Genius at an Apple Store or an Apple Authorized Service Provider for help.  If you plan to visit an Apple Retail store, you can make a reservation (available in some countries only).
    Tip: To help diagnose recurring kernel panics, record the date and time it occurs, and any information that appears with the kernel panic message.
    Was the computer starting up, shutting down, or performing a particular task when the recurring kernel panic happened?
    Is the kernel panic intermittent, or does it happen every time you do a certain thing? For example, were you playing a particular game, or printing at the time?
    Does it occur only when a certain external device is connected, or a device is connected to a certain port?
    Start with the troubleshooting steps in the section called "Isolate hardware or software as the cause of the issue."
    OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem."
    http://support.apple.com/kb/TS4636
    Best Regards,
    Jeremy

  • HP laserjet 1020 printer Drivers for iMac

    Please, where I can find out HP laserjet 1020 printer Drivers for iMac OSX 10.9.2 ?
    Thanks.
    JHBarbosa
    This question was solved.
    View Solution.

    Your answer solved my doubts. Now, it's clear to me what I have to do. Thanks.
    JHBarbosa

  • Which HDD for my MBP early 2008

    I have a MBP (4.1 - MBP41.00C1.B00) early 2008 with an Hitachi 200GB 5400rpm.
    I am planning to upgrade to a 500GB HDD and honestly I made up my mind in going to Hitachi 500GB HDD instead of other drives such as Seagate, Samsung or WD.
    I had actually made up my mind in going for the Hitachi 500GB 7200 rpm 16MB cache - 7k500 (HTS725050A9A364), however while reading some of the posts I came to find out that my SATA i/f only supports 1,5Gb/s.
    My question is, does anyone with a similar MBP and similar limitation of 1.5Gb/s gone for this HDD? Does it make sense at all? Is it better than the 5400 rpm 500GB Hitachi version (HTS545050B9A300)?
    Do I get any performance increase in going for the 7200rpm hdd instead of the 5400rpm hdd? and does this performance compensate for the increase in the temperature and decrease in battery life that I am going to have?
    Does anyone have a similar experience?
    I have seen several forums where people recommend the 7k500 but its not clear if they have an early 2008 MBP with a 1,5Gb/s limitation as I have. Does is make sense at all going for a 7200 rpm hdd in my machine? or should I just go for the 5k500 5400 rpm hdd?
    Can anyone help me on this?
    Thanks a lot!

    I have a similar problem (and am hoping that someone replies to yours).
    I have an early 2008 MBP, 15", with a FUJITSU MHY2250BH 250GB internal hard drive. I'm also planning to swap in a 500GB drive.
    On Newegg I came to the conclusion, from user reviews by macbook pro users, that the Fujitsu MJA2500BH-G2 was trouble-free and utterly silent (sound being way more important to me than speed) – but it looks like it's been discontinued, and the reports on the Fujitsu MJA2500BH (not -G2) are less enthusiastic.
    From the reviews on Newegg, some people report having had problems with the Hitachi drives you mention (both the 7200 and 5400 versions) in use with Macbook Pros, but, as you said, it's often unclear which MBPs those people were using the drives in, and if the early 2008 MBPs would have these issues...
    Did you make a purchase yet?
    Any other early 2008 MBP users want to suggest a silent drive for upgrade?

  • Hardware for Mac Pro early 2008

    Hi there
    We have very old Macs at our university. We will renew them next year, however we need to hook up our magnificent video monitors to Premiere Pro CC. There is only DVI and FireWire signal out, no thunderbolt. Inputs on the monitor are HD SDI and HDMI.
    I´m sure there must be Hardware for this Mac Pro (2008) in order to connect to monitor digitally. I´m sure there were options when Adobe Premiere Pro CS3 was the current version back in 2008. Any ideas?
    Jon

    I have already connected two monitors via a DVI “hub”. So they are up and running fine.
    The hub don´t have any more outputs of any kind. Also I´m not sure if the quality would be good enough for the monitor output.
    Now I also realised that there is no HDMI input on the monitor, only HD SDI.
    Please look at photo here for info on my current graphics card.
    Best,
    Jon
    Fra: RoninEdits <[email protected]<mailto:[email protected]>>
    Svar til: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
    Dato: Thursday 19 February 2015 11:40
    Til: Jon Berntsen Huseby <[email protected]<mailto:[email protected]>>
    Emne:  Hardware for Mac Pro early 2008
    Hardware for Mac Pro early 2008
    created by RoninEdits<https://forums.adobe.com/people/RoninEdits> in Hardware Forum - View the full discussion<https://forums.adobe.com/message/7209429#7209429>

  • How could i download drivers for imac mc814 for windows 7 ? and from where ?

    how could i download drivers for imac mc814 for windows 7 ? and from where ?

    If you are trying to run MS Windows in Boot Camp then please post in the correct forum, the Boot Camp forum. That is where the Windows guys hang out.

  • I need an "Open CL compatible graphics card for an early 2008 Mac Pro with 1 gig of V-Ram", any recommendations? Thanks.

    I need an "Open CL compatible graphics card for an early 2008 Mac Pro with 1 gig of V-Ram", any recommendations?
    Thanks.

    BlackList:
    Final Cut Pro X, Motion 5, Compressor 4: Graphics card compatibility
    WhiteList:
    Final Cut Pro X, Motion 5, Compressor 4: Using OpenCL-enabled graphics cards
    OpenCL graphics cards available now, for any Mac Pro model, for a reasonable cost:
    Apple 5770 US$250 Avail: in stock
    Apple 5870 US$450 Avail: 2-3 weeks

  • UPS energy backup for my MacPro Early 2008. Recommend?

    Hello everybody!
    I want to buy a UPS energy backup for my MacPro Early 2008 with 2x 2.8ghz, 2x HD 1TB, and 16gb ram
    How much power consume this configuration?, and how many VA or Watts I need to get with the UPS?
    Thanks!

    2008s can have high inrush current
    Inrush current
    Some people really want SMART UPS and others not.
    I do feel 650W is marginal though 1200VA is fine, if accurate, though I tend to like to over compensate.
    CyberPower UPS 1500VA 900W PFC Pure sine wave
    CyberPower CP1350AVRLCD 1350 VA 810 Watts UPS

  • Need sound drivers for a Pavillion dv8309us running Windows 7 Enterprise 64-Bit OS

    Need sound drivers for a Pavillion dv8309us running Windows 7 Enterprise 64-Bit OS. I'm getting "no audio output device is installed" error after trying various different drivers. Sometimes the driver will install and I'll reboot, but to no avail I end up with the same error and a red X over the speaker in the system tray. I've tried Realtek drivers and Conexant drivers from HP. When I run Windows upgrade advisor it recognizes the problem, but Microsoft doesn't offer a compatible driver. At this point I'm very desperate considering everything else works fine and I don't want to go back too XP Media Center. If there is anything you can do to help, it would be greatly appreciated. Thank you

    I guess this one isn't even 64 bit but it is the one on HP's site:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-46818-1&cc=us&dlc=en&lc=en&...
    I never tried to force a driver but I think it can be done.  I seeing that in some threads.
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

  • Will the Google Docs app in the iTunes store work with my new iMac? Description states it works with the iPod, iPhone and iPad.

    Will the Google Docs app in the iTunes store work with my new iMac? Description states it works with the iPod, iPhone and iPad.

    There's iOS apps for iOS which is what iPods, iPads, and iPhones use.  Then there are Mac Apps (which is a different store) which is what run on a computer with OSX.

  • Trying to load illustrator 6cs onto new mac and the old activation code for my ill cs doesn't work with it

    Trying to load a downloaded version of illustrator 6cs onto new mac and the old activation code for my illustrator cs doesn't work with it.  Do I need a new code or am I missing something?  Same goes for my Photoshop cs.

    you need your serial number.
    if you purchased from or registered with adobe check your account, https://www.adobe.com/account.html

  • What app do i need for my epson 600 printer to work with my ipad

    what app do i need for my epson 600 printer to work with my ipad

    Hi,
    You are asking at a wrong forum, anyway firstly please check to see is your printer in this list ? 
    http://support.apple.com/kb/ht4356
    If Yes, please follow this checklist and fix:
    iPad: http://www.apple.com/support/ipad/assistant/airprint/
    If No, check with Epson
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Is there any updates available for Acrobat 7.0 to be used with Vista?

    It seems to be an uncompatibilty with Vista that I acquired yesterday. No problem with XP but struggling with Vista. A guy in Dublin over the phone (when I registered the product) said it was not compatible and that is it. No solution he was aware of. The message given as a code error is 93: -2 or a window appears in Acrobat saying:
    HKCMD.EXE and IGFXTRAY.EXE - BAD IMAGE
    C:/WINDOWS/SYSTEM32/IGFXRES.DLL IS EITHER NOT DESIGNED TO RUN ON WINDOWS OR IT CONTAINS AN ERROR.
    The suggestion is to desinstal and reinstall software. I have tried this but still the same problem. I have tried so many times that I could not activate the software automatically over the internet - so called this guy in Dublin...
    I reckon that the suggested update to Acrobat 7.0.1 is not good as when installed, repeated error messages come up! I am reluctant to try to download it again just to try because I am scared that I will have to call Dublin again to activate the software...
    Any suggestion on the above?
    Thanks guys.

    Starting here http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows
    You could click the individual update links to read the descriptions of what is included in each update
    The current version 9 is designed for Vista (as well as XP)
    As far as I know, version 8 would work with Vista AFTER you applied the updates

Maybe you are looking for

  • DMS Configuration of Vedio file and Doc file

    Dear All, I am new for DMS concept and my company requirement is to upload. word Document and vedio file in DMS with only DISPLAY write to everybody. please let me know the configuration part we are using             ECC 6.0 Database                 

  • Link to you tube but open in lightbox in captivate

    I have a link to you tube on a click box and would like it to open the you tube movie in a lightbox in captivate rather than it taking me to the you tube site. how can I do that? JJ

  • Error messages when i try to render

    i have after effects on windows xp and when i try to render it i either get the message "the directory originally specified in the selected output no longer exists" or it gives a message that says access denied. i have tried changing the drive im sav

  • How to save JTabbedPane to file so it can be restored later

    I am trying to build a program that will allow the user to add/remove tabs and buttons in a JTabbedPane and then save this to a file so that it can be restored later. However when I try to restore it from the file I cannot get it to update the panel.

  • AD RMS Setup failed because of invalid configuration setting

    HI, when I configure AD RMS configuration it gives me error that "one or more  ADRMS role services could not be configured: AD RMS setup failed because of invalid configuraion setting". The user which I try to install is an administrator of DC and a