Locating my printer setup utility

I dont seem to have a printer setup utility how do i get one to add my new printer to?
did it go the way of my virex when i loaded leopard? cause im getting this error msg to list the new printer in the setup utility and my search provides no printer setup utility. is there a way to get this as a download?

Yes ... here is a list of what I have done:
loaded the driver from supplied disk for printer lexmark x5470
followed directions of error msg and looked for the printer setup utility ... could not find
called lexmark (2ce)
1st time said I needed to down load the driver from their web site, which I did ... no resolution
2nd time they said I needed aforementioned utility and for me to contact Mac
(Mac has no phone support available for me or live online support so here I am at the discussion
boards)
reloaded Leopard ... still did not get a file called printer setup utility ... printer worked briefly and
then back to receiving error message. mainly from printing attempts from the web (only file I
could print from HD was a .tif file. all other .doc or .rtf would not print.)
opened disc utility and verified disc permissions ... some errors related to lexmark then repaired
tried moving the downloaded patch from lexmark around to applications and then to the lexmark
folder its self but nothing seemed to help
Is there not a Mac tech out there that could help?

Similar Messages

Need help to find printer setup utility

I recently bought my first Mac and have slowly been adding to it over the last couple of weeks. Today I added a new printer that I wish to connect wirelessly. The printer is a Brother MFC-3360. I installed the software that came with the printer and had the printer connected directly to the Mac Book. It printed just fine.
I then disconnected the USB cable and plugged it into the Extreme Base station. It failed to print. According to the Extreme manual, I need to open printer setup utility, located in the utilities folder in the applications folder. Then from there I need to add the printer.
The problem is, I have no printer setup utility. Is there another place where it might be located?
Any other ideas will be much appreciated. Thank you!

Found problem. Went to Sys prefs -> Printers and Fax -> removed my printer and re-installed. Works like a charm.

Print Center / Printer Setup Utility missing

My refurb iMac had its entire logic board replaced several weeks ago. Since then I have not been able to use my Epson Stylus Photo R280 printer. Turns out that somehow my utilities called Print Center and also Printer Setup Utility have disappeared from my computer. Because it is a holiday, I am unable to to contact Apple Care by phone. I tried to locate a place on my Leopard install disk where it lists zillions of single items which I could chose to install, but can not find it. I am hoping that someone in here can direct me where to look. My Brother HL 2140 is working fine. I'm stumped.
Holly

Got a reply from Epson. Even though I originally told them the printer was hooked up to a wireless Airport Extreme Base Station, they seemed to ignore that fact. But, finally they came up with this excuse:
Response (Stephan R) 08/21/2008 11:19 AM
The Epson Status Monitor requires constant bidirectional communication with the Host for it to function properly. The Airport Extreme only allows a one way communication, so when the Epson Status Monitor tries to update the Host with the proper ink levels you will receive a communication error.
So, I guess that you can't use the print utility from a wireless connection, I hooked the printer to one of my Macs and added the printer to the Utility there. The utility works there, but I have to reconnect the printer to the Airport Extreme and visa versa to make they whole thing functional. Oh, well.

Printer setup utility not recognizing printer

I have a G5 powermac with os 10.3.9. I have a HP 5000n printer with an ethernet connection over a LAN. The printer was working fine however It stopped working today. I tried reinstalling the HP drivers but the printer does not come up in the printer setup utility list. So I deleted all old references and tried again but still not showing. As I remenber this original setup was really easy but I can't get it to work now? Any help greatly appreciated

Printer troubleshooting checklist:
1. Check that the printer operates by doing a self-test print using the buttons on the printer itself.
2. Check that the cable is fine. Perhaps swap the cable if another is available.
3. Repair Permissions using Disk Utility, found in Application/Utilities.
4. With Printer Setup Utility closed
Locate the com.apple.print.PrintCenter.plist
found in ~/Library/Preferences and trash it.
5. Switch off, disconnect and unplug the cable of the printer.
Locate the com.apple.print.HP5000n.plist or similar name
found in ~/Library/Preferences and trash it.
Reconnect the printer, switch on.
Open Printer Setup Utility, select add printer.

Printer Setup Utility - Add Printer not working

I am visiting my grandparents over the holidays and brought my computer along but no printers. G-pa tells me I can use his HP Photosmart 325 (which has never been used). However, I must download the driver/software online b/c he can't find the CD. So, I go to HP and download all the necessary files. Once all is installed, I connect the printer and go to the printer setup utility to add the printer, like I have done a million times before. There in the printer list I choose the ADD icon and it brings me to the printer browser menu. There it is listed, Photosmart 320 Series connection type USB, yeah I think.... BUT NO, I click on the printer and the ADD button is dimmed, and will not allow me to click it. Soooo I see on the bottom there is Name, Location, and Print Using section. I try Print Using, and select HP, but once selected there is NO HP model that remotely matches my printer!
What in the world is going on?

This is the exact same thing that is happening to me. I have an older Canon card printer (CP-200), and a recent Epson inkjet (Stylus Photo R280), both of which I cannot set up properly. In both cases, I get to the Add screen, and the default browser finds my printer, but I can only add after I choose a driver. Even after repeatedly installing/uninstalling the drivers from Canon and Epson, I cannot find my printer models in the drop down list of printer drivers. There are some Gimp-print drivers there, but not for my exact model, and since I have installed the vendor's own driver already, why can't I use it? This is so frustrating! Please help!

No Safari - no Printer setup utility

I have an Epson CX6600 printer scanner. I had created PDF files and tried to print one. I got the message that the application Printer Setup Utility has unexpectedly quit. I tried various other files and kept getting the same message. Then I went to reset my Printer Setup Utility and it would not open.
Soon after Safari would not open (no layouts come up). Even when I ask for a new window nothing happens. I reinstalled my original software, which is OS X 10.3.5, tried again, with the same results. I don't even know how to upgrade back to 10.3.9. After reading other forums I decided to go to a different partition and I found the same problems. Yet Internet Explorer works and my email program works. However, all my bookmarks are at Safari, so I would love to get it working again as well as having my printer print.
Some context about the problem. I had been creating and saving PDF files, which is what I was trying to print. I had recently installed Virtual PC and Windows XP Home.
Any answers! Would be very grateful.

Hi syncopat!
Have you run Repair Permissions?
TO REPAIR PERMISSIONS ON THE STARTUP DISK
1.Open Disk Utility, located in Applications/Utilities, and select the startup disk in the left column.
2.Click First Aid.
3.Click Verify Disk Permissions to test permissions or Repair Disk Permissions to test and repair permissions. (I never Verify. Just run Repair.)
Rerun RP until the only messages reported are listed in this link.
Spurious Permissions Errors Using: 10.3.x
When Repair Permissions is complete. Quit Disk Utility.
ali b

Why doesn't the HP printer show up in the printer setup utility?

Can't understand why the HP2100 TN laserjet printer that is networked(ethernet) via a Snow basestation does not automatically show up in my list of printers. I also downloaded HP's drivers for it.
My boyfriend's Powerbook running 10.3 is able to automatically see it, and it showed up as "shared" on my computer when his laptop is up and running. I tried Appletalk etc. He got it running using IP printing and having the IP address, but he told me it should have just showed up.
I'm new to the Mac so I don't understand this. According to the config page he printed Appletalk is active on the printer its selected on my networking page.
Any help apprciated.
Macbook Mac OS X (10.4.8)
Macbook Mac OS X (10.4.8) printer setup utility v 4.6

Try to check here.
http://docs.info.apple.com/article.html?artnum=303593
http://www.mac.com/1/learningcenter/Modules/LHTSolve_t4.html

HP Laserjet 6p is not recognized in Printer Setup Utility

I bought recently used HP Laserjet 6p printer and connected my PB to it's Apple Talk port via AsanteTalk Box. After I installed the HP 6p printer driver (downloaded from the HP site) I've tried several times to find the printer in the Printer Setup Utility but it doesn't appear on it! I've even downloaded a printer driver for MacOS 9 and tried to print in Classic environment but can't find any HP printer in the Chooser. Is there any solution for this problem?
I'll be very thankful for any suggestions.

Apple included the Gimp-Print driver "HP Laserjet 6 Series" for that printer. Does that show up?

Epson 4800 Ethernet IPP Network Cant Add PRINTER SETUP UTILITY

Greetings!
Any known issues?
Does anyone have this working??
I am having a time TRYING to ADD a new Epson 4800 printer, Epson Ethernet card onto new Mactel laptop and new quad G5 (both 10.4.7).
Epson NetConfig Utility sees the printer and set an IPP address.
However, Apple PRINTER SETUP UTILITY Add IP printer isn't working.
I had qualified Epson support taking me through the steps...he said some issues with the Intel books, but that doesn't explain why the G5 isn't working.
Three hours yesterday and I'm back on it later today...any tips/info appreciated.

Hi all,
I recently bought an Epson Stylus DX4850 and I'll be damed if I get the thing installed on my Intel based Mac! This is driving me mad, I've been told that it is compatable. I've downloaded all the drivers from the Epson website but when I go to add the printer it's not listed. Does this mean that I need to use a different driver or gimp driver?
Any help would be greatly appreciated and would prevent me from going insane!
Many thanks, Jon
Mac OS X - Intel Mac OS X (10.4.7)

No drives shown in printer setup utility

Accidently erased printer drive for Hp deskjet 935c, when I went into printer setup utility app there was no drivers displayed even when I hit "more printers" still no divers were shown. I thought somthing wrong with printer setup utility app so I reinstalled it using Pacifist still no change. Need help soon kids on my back to use printer.
Mac OS X (10.4.7) imac 500

That was the next question. I just went through 5 hours of frustration with a new printer and cable on a Canon MP780. The cable was bad. It works great with a good cable.
MJ

CAN'T GET PRINTER TO ADD IN PRINTER SETUP UTILITY

I've recently purchased a Epson DX4850 printer for use on a Mac using 10.3.9. I installed without problem and it worked fine for first 4 days. Then the driver seemed to disappear. I tried to readd through printer setup utility but it came up with message "SERVER ERROR SERVICE UNAVAILABLE". I tried reinstalling, redownloading driver from Epson website, deleting prefernces and reinstalling but it wouldn't work.
I don't get the message anymore but when I try to add printer it says its found printer driver do I want to refresh the screen but then when I click ok nothing happens.
Under Epson USB it's blank and under USB it has Stylus driver with a ? and not installed.
I've had the printer checked and that works fine.
CAN ANYBODY PLEASE HELP ?

Sorry Hirsty I can't help but just to go on the list that I"m having similiar problems with my Canon ip4200. I'm running 10.3.7 and can't even find the drivers even though I've installed them from the disc and then from a download. Still won't show up.

Printer setup utility freezes when I try to add drivers

I have an Epson Stylus Photo RX500 all-in-one printer which worked fine until a few weeks ago. My best guess as to why it stopped working is that I let my hard drive fill up and some data got corrupted/overwritten (I've had numerous problems incuding my System Folder becoming 'unblessed' which necessitated a reinstall).
When I tried to print there were no drivers recognized. If I checked in home>library>printers I could find what appeared to be the driver (Stylus Photo RX500) but opening that would bring up a message it wasn't in my list of printers. Trying to add the printer to the list gave the message that the driver wasn't found. In the Finder the driver was listed as 372KB. In my cloned external HD the same file was listed as 408KB. Copying over the larger file to my internal didn't solve the problem.
I went to the Epson site and found a driver which was only listed for OS10.2 and a driver to Intel Macs (I have a G4 PB). I downloaded the 10.2 driver and installed it (408KB). Now when I open the printer setup utility EPSON USB is listed as an option but when I click on that the utility freezes. I've tried restarting and repairing permissions but still no go.
Yoroshiku onegaishimasu. TIA.

Ohayo gozaimasu,
I saw what was available on the US site, so went to the Epson UK site, where they show one driver for OSX - PowerPC, for the RX500, it's version 1.9b versus the 1.7 on the US site. The driver is a 7.9mb download. Looking at the other English sites around the world, 1.9b seems to be the lastest OSX PPC driver.
The link is http://esupport.epson-europe.com/FileDownload.aspx?lng=en-GB&ID=19449&data=6D58D 013F2B22854B9450E1814C134D338E0C605169D8D398A3275D13F8B5BB5
Perhaps that will work better for you.

Printer Setup Utility will not allow new driver to be added

I just bought a Canon Pixma MP960, installed the drivers and then downloaded the driver from their website. When I go to add a new driver in Printer Setup Utility--i highlight the MP960 connected thru USB, but the 'add' feature is not lit up. When i have it search for new drivers, it detects a new driver, but when I hit 'add'--Printer Setup Utility "unexpectedly quits" every time. The only drivers in there are beta thingies that do not work w/ my printer.
The Canon tech guy says that there is a problem with my Printer Setup Utility--but i can't seem to find a solution online. I don't know much about macs, but can I update the Printer Utility program or something? help!

Part of the problem might be if you actually have more than one version of the driver for the printer installed on the computer. Check the drivers at Mac OS X disk/Library/Printers/Canon/ and make sure there is only one plugin for the printer. If you have more than one, trash both and download and install only the driver from Canon that is compatible for Mac OS X 10.4.x. After you install the driver, run Repair Disk Permissions using Disk Utility. If you have only one correct printer driver plugin installed, it should work.

C6180 does not appear in my list of printers in Printer setup utility (mac OS X 10.4.11)

My C6180 was printing slowly so I followed the steps in the forum (unplugging, holding down the buttons, etc. ... Shut down, restart, etc.) Now it doesn't appear in my list of available printers when I try to set up again in the Printer Setup Utility. My software is updated. How to I get it in the list. I've been around in circles and I may have messed up some settings in trying to solve this. I have to print stuff for work. Freaking out a little. Help.

Hello,
Thanks for the post. Murphy's Law, as soon as you really need to print something for work, this happens!! I've pasted a link below that should help you resolve this one. I hope this helps..........GOOD LUCK!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00653122&tmp_task=solveCategory&cc=us&dlc=en&la...
Just in case, below is a link for the drivers should you need to download. There is a Universal Driver that supports MAC OS 10.3/10.4 if you need a quick and dirty......
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw_lang=&product=11534...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

HP 1610 All-in-one drivers not seen by Printer Setup Utility

Just got this new for christmas. I downloaded the latest software and installed it. It was "successful". Everything with the software and the printer seems to be OK. When I go to add the printer to Printer Setup Utility I see the printer icon with a ? overlayed on the list followed by the printer name, followed by "no drivers installed". The "add" button is grayed out so that the printer can't be added. I can scan with the software I installed, and everything else seems to work except printing. Looks like to me that the problem lies with the PSU. I spent about an hour and a half on the phone with a very helpful HP Tech., but no-go. I repaired permissions, but that didn't help. The unit is seen by the System Profiler. PSU is v.3.0. I am using "Panther" 10.3.5. Sure would like some suggestions... Thanks!

I did as you suggested but it did not fix the problem. The software seems to be working but the HP device 4620 printer etc will still not connect to the router/network. I am still getting the message wrong password when the correct password is used
Cheetah12 wrote:
Thank you for this information. Let's try some more steps:
I would like you to restore the defaults on your printer:
1) Press the Wrench on your printer
2) Press the Tools menu
3) Press Restore Defaults and click yes
Once this is complete, I would like you to remove the Officejet 4620 software (If there is any on this computer). Please follow this HP document on Uninstalling the Printer Software. Remove the USB cable out of the computer, if it's already connected. Next, let's clean out your Temp folder on your computer:
1) On the keyboard, hit the Windows key and "R" key together, then type %temp% and click enter.
2) Press Ctrl and A together (This will highlight everything)
3) Right click with your mouse and select delete
Now, perform a clean boot on your computer by following this Microsoft document here. This helps eliminate software conflicts that occur when you install a program or an update or when you run a program. Try installing the software from the HP website here. Choose your correct operating system; Either 32 or 64 bit. Do not connect the USB cord into the computer until prompted.
Please post your results again!

Locating my printer setup utility

Similar Messages

Maybe you are looking for