Location-based w/o having to make each item location-based?

Hi, I know how to make an entry on a reminder list location-based, but can you tell me how to set an entire reminder list to be location-based (if that's possible). In other words, can I make a reminder list called "Costco" and set it so that every item on the list (essentially the whole list) pops up when I enter the Costco store?
I have only been able to do this by setting each entry on the list as a location-based reminder, but I would like to set the entire list- and every item on it- to pop up when I enter that geo-fence.

You can let Apple know your thoughts by going to www.apple.com/feedback. You can supply feedback there regarding enhancements you would like to see. They do not respond to your posts, but they do review them there.

Similar Messages

Is there a way to empty the email inbox without having to mark each item separately?

I would like to empty inbox and sent mail boxes en masse; ie, without having to mark each mail item individually and deleting them in that manner. Is there any way to empty these boxes with one or two operations?

Unfortunately, no.

The operation can't be completed because some items had to be skipped. For each item, choose File Get Info, make sure "Locked" is deselected, and then check t

The following error comes up when I try to install the updated Firefox:
"The operation can’t be completed because some items had to be skipped. For each item, choose File > Get Info, make sure “Locked” is deselected, and then check the Sharing & Permissions section. When you are sure the items are unlocked and not designated as Read Only or No Access, try again."
When I follow the instructions in the error message, it shows that my user name has read and write access. There are a couple other items that are read only. I tried to change this to read and write, but the Sharing and Permissions options are greyed out and will not let me change them. What is the work around for this? I would really like to install the new firefox.
Thanks.

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default('''This will NOT delete profile info such as bookmarks and history'''):
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

I have over 16,000 songs in my iTunes library so I manually manage the music on all my devices. I bought a new iPod to replace an older one. I'd like to transfer all 900 songs to my new device without having to handpick each song. Is there a way to do it?

I have over 16,000 songs in my iTunes library so I manually manage the music on all my devices. I bought a new iPod to replace an older one. I'd like to transfer all 900 songs to my new device without having to handpick each song from my music library. Is there a way to do it?

No. I have quite a few more 16,000, so I don't manually manage. Making playlists for each device makes things much easier to organize. You can create regular lists of essential tracks and smart playlists to automatically catch new content, top rated, most played etc. If you'd done it this way all along configuring a new or restored device would be the work of moments.
tt2

Is there any way to change the security on multiple pdfs without having to open each pdf in acrobat ?

Hi all
Is there any way to change the security on multiple pdfs without having to open each pdf in acrobat ?

Hi Gilad
Thanks for the reply
I'm not sure how to create an action I have Acrobat Pro 8.
My company would love if I could make it as a batch file or some exe so that each file doesn't have to be opened in Acrobat

Why can't I delete all incoming messages at once without having to select each one first. It can be done while in the "Trash" folder, but not the "IN" folder.

Why can't I delete all incoming messages at once without having to select each one first. It can be done while in the "Trash" folder, but not the "IN" folder.

Well, what I see happing is this: Tapping edit and checking the first message brings up the “Delete” option. Holding it until the red message “Delete Message” appears, then letting go of the red button and tapping the checked button makes the “Delete Message” message go away. The checked message is still checked with an option to delete just that message. Tap the checked message again just cancels the whole process and I’m back to square one.
However, if I check a message that is part of a thread of messages and tap Delete, I have the option of deleting all messages in the thread.
Perhaps the fact that I’m using the 3rd generation of the iPad is the problem, but your suggestion isn’t working.

What does having to make these same two hue/saturation adjustments mean?

I keep having to make the same two yellow adjustments in Lightroom. No matter the subject matter, indoor or outdoor. And no matter the camera body. See the before and after screenshots:
Before: The puppy coats are too yellow (to me), even after eyedroppering the color card. The puppy whites look correct:
After: Yellow Hue -30 -- Yellow Saturation -20.   --The puppy coats now appear correct.to me (the puppy whites are still correct). You can also see what happens to the yellow on the color card --it looks less yellow!? --I find myself doing this adjustment on at least 80% of all my photos. Probably the only reason I dont do it is when there is no yellow in the shot.
This is in Lightroom V4.3. This was taken with a Nikon D4, two reflected strobes set up on either side, and with room lighting on, but none of that seems to matter. I have several other cameras, and light source does not seem to be a factor --once I eyedropper the card everything looks good except the yellows. The monitor/computer does not seem to matter either. I see the same problem on both my desktop monitors and laptop, which are calibrated the same (to 6500k=white). I have ruled out room lighting reflection because this occurs with outdoor shots, and in either case after setting white balance either with a card or an expodisc.
I don't know enough about this subject to say it might be my aging eyes, but I am running out of other things to consider.
That is why I posted this. I guess the first question is can anyone else see what I'm talking about? If not, that would implicate my eyes. Why do I have to see incorrect yellow on the the card in order to see correct (in this case) coat colors?    If anyone has any ideas, thanks in advance!

trshaner wrote:
Post some small sRGB profile JPEGs (1200 x 800) here with the LR adjustments you think look best. This is what your clients will see, correct?
Here are a few random examples: Either they've been used, or they are examples of what the exhibitors/publications will like.
This one seems really close to the accuracy I try for (with varying success).
Here is the "yellow problem" which I didn't even try to fix because it sorta worked with the cloudy day shot,
This shows the reason for cranking the highlights down and the shadows up --to get detail out of both coat colors (which shows off the dogs muscle structure) This is the most extreme example, a black and white dog on a bright sunny day.
Indoor events have to be available light, upper limit is set to ISO 6400, The lighting can be next to impossible to fix so these are probably not good examples of what you were asking for. Every shot in a 9fps sequence can have a slightly different color even if the house lights look even. I think these are slightly blueish and cannot seem to fix them any better without diminishing returns elsewhere.
1/800 ISO6400 If it's too grainy for hair detail I try to get at least some shadow definition in the black coat.
This one looks either a bit too saturated or about right depending on what screen I see it on.
trshaner wrote:
The yellow adjustment issue with your ColorChecker Passport profiles indicates a problem, since you don't see this with Adobe and Camera Standard profiles. Are you rechecking the White Balance using a ColorChecker image's grayscale patches when you switch to Adobe Standard and other profiles? I use a Develop preset for each of the LR provided camera profiles containing only White Balance and Calibration (i.e. camera profile). The white balance is slightly different from the settings required for the ColorChecker Passport profile, but the same for all of the LR provided profiles (Adobe Standard, Camera Standard, etc.).
Example White Balance Canon 600D:
Profile                                Temp Tint
ColorChecker Passport 5550   +23
Adobe Standard, etc.     5600   +10
Yes, when I check the white balance the whites look good but the yellow persists. I misspoke earlier --I do see the yellow problem on the standard camera profiles, just not nearly as much. The other thing I've noticed is that the xrite profiles look too saturated next to the standards. I often have to lower the saturation, or the just the orange saturation (for the dogs). I cant help but think that is somehow connected to the yellow issue.

Variant Pricing _ each item price based upon main item.

Hello,
I request your help for inputs on Variant Pricing functionality for given scenario.
Each material will have different price based upon different brand / main item.
For example u2013 Inbuilt-Sat Nav will be priced different in Toyota Prius & Toyota Avensis.
Let say, we have 2 products (Toyota Prius & Toyota Avensis.) each having 10 different options/ items which are charged separately.
Hence would like to know how we can set up the price in variant based upon Main item & sub item.
Toyota Prius / Customer / InBuilt Sat Nav = £1200
Toyota Avensis / Customer / InBuilt Sat Nav = £1500
Your inputs are appreciated.
Thanks & best regards

If you want to maintain seprate prices for each variants go to VK11 use the following condition types -
VA00: this condition type expresses an absolute amount.
u2013 VA01: this condition type expresses the surcharge/discount as a percentage
above are based on sales org, material and variants combination, so as you said you requirement is based on customer will charge different prices, so create new condition table with customer combination and add in to same access sequesnce and condtion type.
For more details check the below link:
http://www.sap-img.com/sap-sd/steps-for-sd-variant-configuration.htm
regards
Satish

Query to get a group having n rows each

I have emp table empl_id in sorted order and i need column value "Group no" based on value of N. (making a group start with 1 having n employees each)
N=2
emp_id    Name   Group No
1001          A            1
1003         B             1
1004         C             2
1006         D             2
1007         E             3
1009         F             3
N=3
emp_id    Name   Group No
1001          A            1
1003         B             1
1004         C             1
1006         D             2
1007         E             2
1009         F             2
Your SQL is highly appricated.

Hi,
Since I don't have a sample version of your table, I'll use scott.emp.
Here's one way:
VARIABLE n   NUMBER
EXEC     :n := 3;
SELECT    empno, ename
,         CEIL ( ROW_NUMBER () OVER (ORDER BY ename)
               / :n
               )       AS group_no
FROM      scott.emp
ORDER BY ename
The highest-numbered group may have fewer members than the others. For example, scott.emp has 14 rows. There's no way to assign every row to a single group and have 3 members in each group; there is no integer X such that 3 * X = 14. So the query above assigns 3 members to group_nos 1 through 4, but only assigns 2 rows to group_no=5.

Can i change the genre for songs that i have in another playlist without me having to make duplicates of the song

can i change the genre for songs that i have in another playlist without me having to make duplicates of the song for example have a songs in my playlist rock genre but in my mom playlist she made it custom for workout

ryane84:
Is there any reason why you keep creating new threads about the same subject?
If you stick to one thread, perhaps you may find a solution. ed2345 is the fourth person to offer help, and yet you respond each time by creating a new thread instead of explaining (in the first thread) why the previous solution hasn't worked for you.
But why exactly are you concerned about the genre anyway? A song can be in as many playlists as you wish, it has nothing to do with genre, unless you are creating Smart Playlists that use Genre as a rule of the list. If so, you have already been offered two solutions:
create a second copy of the song and edit that second copy to the second Genre.
use Grouping to cause the only copy of the song to be added to two separate Playlists.
By the way, creating new threads and thereby ignoring those who have offered help in existing threads is impolite.

How do you delete duplicate songs in your library without having to delete each song individually??

How do you delete duplicate songs in your library without having to delete each song individually?

mauijiminar wrote:
Go to iTunes, select view and click show duplicates. Hold control and A ( select all) and then delete.
Not a good idea! The "show duplicates" feature shows "all" duplicate tracks, but you only want to delete the "extra" copies, not the "originals".
I've written a script called DeDuper which can help remove unwanted duplicates. See this thread for background, including how to delete the extra tracks manually if you prefer.
tt2

How do I add multiple addresses/contacts in an email tread to my contact list without having to enter each at a time?

How do I add multiple addresses/contacts in an email tread to my contact list without having to enter each at a time? I have AppleScript but don't see "add address" in any of the boxes/drop-downs.

Sorry, but Address Book does not allow you to select more than one email address to send to in a group. There's really no reason why people need multiple copies of a message, anyway; they have the option of forwarding email to another email address of theirs.
Mulder

Can someone please explain how I download all my songs from the cloud without having to tick each cloud individually for each song

Can someone please explain how to download all my songs from cloud without having to tick each cloud individually

Music > iTunes Store > Music Quick Links > Purchased > Not in My Library > Download All.
tt2

How do I deal with audio, seperate left and right and make each stereo--CS5

I have a two mono mike recording which I can seperate into two seperate audio timeline tracks one is now left track in a seperate timline and the other is right in the other timeline, how do I make each of these tracks then into psuedo stereo tracks? Do I have to go to Soundbooth or is there a simple way in Premiere?

Bill G, tell me what I am missing and I'll use your method. I have what I think you are describing, and I don't understand the need to do anything special, if you use channel mapping.
I record a lav on one channel, and a different wireless mic on the other. When captured, I have a clip that PR would normally treat as a single stereo track.
BEFORE putting any clips on the timeline, select all clips and set channel mapping. Set each channel to mono. Now PR treats these as two mono tracks. The output for each mono is the master track, which in my project is stereo. I can change "volume" for each track in the mixer, etc. but each channel is provided to the left and right master output.
I didn't go back to sort out what you had, but if you had two stereo tracks, one each with a left and right channel only, I can see that you needed some other solution.

How can I move a large number of pics from icloud Photos Beta to a PC without having to select each photo?

How can I move a large number of pics from icloud Photos Beta to a PC without having to select each photo?

Hi,
can you please explain why the solution from steve is not the right solution for you.
regards
Peter

Location-based w/o having to make each item location-based?

Similar Messages

Maybe you are looking for