LOCATION CODE FOR BOTH THE C DISK DRIVE AND D RECOVERY DRIVE ARE BOTH 0. WHY?.

IS THERE INSTALLATION PROBLEM?.INSPITE OF FULL RECOVERY USING BRAND NEW DISCS - WHY?.
THX. KRIS;

It means the C: drive and the D: drive are partitions on the 1st drive in the system and the HDD is designated Drive 0. This has been standard notation for a long. long time.
You should be discussing this issue with the Technical Support of the computer's manufacturer. The D: partition is your recovery partition. The recovery partition is created by the system manufacturer, not by Microsoft or the Windows 7 installation
disc.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Similar Messages

Code for displaying the elements of ArraList and HashMap

hi..im new to java ..
tell me the code for displaying the elements of ArraList and HashMap

myj-ava wrote:
wt abt displaying the elments of HashMap?plz..give clear codehey, this is not a code-giving service. This is a forum of volunteers who help others who have specific questions. I find that the greatest help is given to those who have shown that they've put in at least some effort. You have shown none. Please look at the Sun tutorials first, then come back with a specific question if anything there confuses you.

System Image Restore Fails "No disk that can be used for recovering the system disk can be found"

Greetings
                                    - Our critical server image backup Fails on one
server -
Two 2008 R2 servers. Both do a nightly "Windows Server Backup" of Bare Metal Recovery, System State, C:, System Reserved partition, to another storage hard drive on the same machine as the source. Active Directory is on the C: The much larger D: data
partition on each source hard drive is not included.
Test recovery by disconnecting 500G System drive, booting from 2008R2 Install DVD, recovering to a new 500G SATA hard drive.
Server A good.
Server B fails. It finds the backed-up image, & then we can select the date we want. As soon as the image restore is beginning and the timeline appears, it bombs with "The system image restore failed. No disk that can be used for recovering the system
disk can be found." There is a wordy Details message but none of it seems relevant (we are not using USB etc).
At some point after this, in one (or two?) of the scenarios below, (I forget exactly where) we also got :
"The system image restore failed. (0x80042403)"
The destination drive is Not "Excluded".
Used   diskpart clean   to remove volumes from destination drive. Recovery still errored.
Tried a second restore-to drive, same make/model Seagate ST3500418AS, fails.
Tried the earliest dated B image rather than the most recent, fail.
The Server B backups show as "Success" each night.
Copied image from B to the same storage drive on A where the A backup image is kept, and used the A hardware to attempt restore. Now only the latest backup date is available (as would occur normally if we had originally saved the backup to a network location).
Restore still fails.         It looks like its to do with the image rather than with the hardware.
Tried unticking "automatically check and update disk error info", still fail.
Server A SRP 100MB C: 50.6GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Server B SRP 100MB C: 102GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Restore-to hard drive is also Seagate ST3500418AS.
http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/e855ee43-186d-4200-a032-23d214d3d524      Some people report success after diskpart clean, but not us.
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/31595afd-396f-4084-b5fc-f80b6f40dbeb
"If your destination disk has a lower capacity than the source disk, you need to go into the disk manager and shrink each partition on the source disk before restoring." Doesnt apply here.
http://benchmarkreviews.com/index.php?option=com_content&task=view&id=439&Itemid=38&limit=1&limitstart=4
for 0x80042403 says "The solution is really quite simple: the destination drive is of a lower capacity than the image's source drive." I cant see that here.
Thank you so much.

Hello,
1. While recovering the OS to the new Hard disk, please don't keep the original boot disk attached to the System. There is a Disk signature for each hard disk. The signature will collide if the original boot disk signature is assigned to the new disk.
You may attach the older disk after recovering the OS. If you want to recover data to the older disk then they should be attached as they were during backup.
2. Make sure that the new boot disk is attached as the First Boot disk in hardware (IDE/SATA port 0/master) and is the first disk in boot order priority.
3. In Windows Recovery Env (WinRE) check the Boot disk using: Cmd prompt -> Diskpart.exe -> Select Disk = System. This will show the disk where OS restore will be attempted. If the disk is different than the intended 2 TB disk then swap the disks in
correct order in the hardware.
4. Please make sure that the OS is always recovered to the System disk. (Due to an issue: BMR might recover the OS to some other disk if System disk is small in size. Here the OS won't boot. If you belive this is the case, then you should attach the
bigger sized disk as System disk and/or exclude other disks from recovery). Disk exclusion is provided in System Image Restore/Complete PC Restore UI/cmdline.
5. Make sure that Number and Size of disks during restore match the backup config. Apart from boot volumes, some other volumes are also considered critical if there are services/roles installed on them. These disks will be marked critical for recovery and
should be present with minimum size requirement.
6. Some other requirements are discussed in following newsgroup threads:
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/871a0216-fbaf-4a0c-83aa-1e02ae90dbe4
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/9a082b90-bd7c-46f8-9eb3-9581f9d5efdd
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/11d8c552-a841-49ac-ab2e-445e6f95e704
Regards,
Vikas Ranjan [MSFT]
------- This information is provided as-is without any warranties, implicit or explicit.-------

Even after resets get "The backup disk image "/Volumes/FreeAgent GoFlex Drive/MacBeth (2) 1.sparsebundle" could not be created (error 22)."

HELP! "The backup disk image “/Volumes/FreeAgent GoFlex Drive/MacBeth (2) 1.sparsebundle” could not be created (error 22)."
TC estimates over 750GB for full backup.
Late 2010 MBA is connected wirelessly to
802.11n (1st gen) TC that is connected via ethernet hub built into house to motorola router using charter.com for internet.
I have had same problem for over 150 days and multiple reboots, restarts in proper order, firmware updates, unplugs with 5min plus gaps, bypassing the tc and using external 500gb WD mybook via usb to time capsule, replacement of the WD mybook to new 2TB Free Agent GoFlex drive, etc, etc, etc! Note: I originally named my MBA hard drive MacBeth, but at some point months ago, it said backup already existed and system automatically created MacBeth (2), worked for a while, then stopped again, despite trying nearly daily.
I gave up and started using Carbon Copy Clone daily for just the 128gb on internal SSD of my late 2011 11" MacBook Air, but need to get past these time capsule errors to back up the external disk! Due to lack of space in MBA, I had long ago transferred both itunes and iphoto and all imovie/fcpx files to a 1tb external disk (WD Passport) that I keep in my bag with MBA. It is partitioned with 150gb for cloning the MBA, and over 750gb for media/itunes/iphoto/etc.
Also, I have endured months of "your hard drive is full" messages and system lockups, applying the solution given to me by genious bar (deleting all aol.com outboxes/recovered messages/spam/trash under library/mail/V2/Mailboxes folders, empty trash, restart....watch recovered hard drive space mysteriously shrink next couple days to zero.....repeat)
Due to lack of space, I had not been able to do javascript and other system updates. Yesterday, I noticed even safari bookmark bar had mysteriously emptied (not disappeared, I can hide and show the space where the bar used to be - it is just blank area with no data except for eyelass-book-topsites icons), so I transferred a few large quicktime movie files recorded with isight camera to the external disk, and freed up 20 gbs for the first time!
This got my hopes up yesterday because after I completed all system/software updates, suddenly the bookmark bar showed up and I was able to start the time capsule backup! It took overnight preparing for backup, but finally started and progressed to 12gb of the 100gb+ needed (i guess the update where it left off months ago for the estimated 750gb for the full backup?), then I put system to sleep and took it with me (thus leaving the wireless time capsule network as I do daily fully expecting it to continue when I returned home in the evening.) But alas, upon return, back to the "Time Machine could not complete backup, The backup disk image ".....sparsebundle" could not be created (error 22)" Ugh! More reboots, unplugs, 5min gaps....still Ugh!
So the problem continues...please help! Here are my settings:
About this mac:
Mac OS X V. 10.7.5
processor 1.6 ghz intel core 2 duo, memory 4 4g 1067 MHz DDR3
software up to date!
Airport Utility:
V 6.2 (620.33)
both internet globe and TC show green dots in graphic, however internet occasionally shows yellow then goes to green, but still gets error 22. Suddenly TC showed explanation mark and says lost connection and asked if I wanted to 'forget', gave same errors, then mysteriously went back to green, but still got error 22!.
Internet:
connection: connected, displays router address, 2 dns server, and domain name: charter.com
Time Capsule:
shows network, ip address, serial number, version 7.6.3, status: (green dot) Setup over WAN,
wireless clients: phones, macbooks (including this MBA), printers, wii
If you need other settings to help me, just ask! I have read a few of the other solutions in forums, but trying not to erase disks, especially since it worked for a minute yesterday!

To step sideways.. why not just use CCC to backup the 750GB of the hard disk to the TC.
You need to understand this is going to be a super slow process and each time you stop it.. it is going to give issues. CCC will at least do a more reliable job of it than TM.
I would also say.. this is going to be tough without ethernet. You need to understand the backup speed over wireless can be 10GB per hour.. that makes 75hrs to backup the disk. The air needs to run non-stop doing that.. without you touching it.
I would get another external drive.. plug that into the MBA and if you really want to use TM.. make a backup one to the other.. but CCC will again do a better job and work faster. It will be much faster than over wireless.
I am trying to think of ways around the issue of just speed.. but plainly you have lots of other issues.. being the simple unreliablity of the TM to identify the TC.
If you want to make this work.. give yourself a weekend.
Load 5.6 utility into the MBA..
http://support.apple.com/kb/DL1482
Take the TC back to 7.5.2 firmware. It is a really old version and latest firmware does it no good at all.
Wipe its hard disk using erase and start over.. give it new names for everything.
So call it TC
Set the wireless to 5ghz and name it TC5ghz
Use WPA2 Personal security. Use a 10 character passkey non dictionary.
At 5ghz you should get 2x the speed as at 2.4ghz but the air will need to be right next to the TC..
(alternatively buy the USB to ethernet cord apple have available.. it is $30 in the apple store and do it over pseudoethernet. http://store.apple.com/au/product/MC704ZM/A/apple-usb-ethernet-adapter That is the wrong store but you get the idea. )
WIth a fully clean system.. now do a full reset of TM.
See A4 http://pondini.org/TM/Troubleshooting.html
Direct the TM to back to the TC.. and make sure the external hard disk is not excluded.
Of course the TC has to be 1TB version to fit that much data.. goes without saying right.
Even over pseudo - ethernet this will take many hours.. and you basically have to leave it to work.. do not touch it.. make sure the MBA cannot sleep though.. turn off sleep.. beforehand.

Is the mac mini server the same hardware as the other mac minis (except for the quad core i7 and dual hard drives) with different software or is it configured differently?

I have a mac mini with an i7 dual core processor. It is perceptably slower than my macbook pro with a quad core i7. Does the mac mini server have the same hardware configuation as the regular mac mini with server software or is the hardware different (aside from the i7 quad core and dual hard drives)? I want a mini with a quad core i7...

Your assumption is correct. The server does however only
have the Intel HD3000 graphics like the base model with
no option, at this time, for the discrete graphics chip. So,
depending on what you are using it for, that could be a deal
breaker. Remember that your MBP does have a discrete
graphics chip.
I have a 2011 Mini Server connected to a Thunderbolt display
that gets used as an engineering workstation and general
personal use (some photo editing, LP restoraton, general
internet browsing). You simply just not enable any of the
server services. I find the combination to work quite well
for my purposes. I also have a 13" 2.7 GHz i7 Macbook Pro
which is pretty much strictly for work. As far as CPU
power it is pretty much equivelent to your Mini. For the most
part I find the Mini does outperfom my MBP. I heavily use
Parallels and Windows7 virtual machines, so the more cores
the better.
So, If you do a lot of CPU intensive stuff that is multithreaded,
the Server may help. If it is graphics intensive and your software
heavily leaverages the GPU, you may actually take a hit on
performance.

T.code for check the Total SRS

pls tell me t.code for match the SRS (stock requitions slip)from store or production ?
Thanks
Rekha Sharma

U can check in MB25 or in MB51.

Wanted to update the software now available, but it is asking for a pass code. As far as I remember in didn't put in any pass code , how do I settle this issue . Earlier updates were asking Apple ID but pass code for updating the new soft ware not known.

Wanted to update the software now available, but it is asking for a pass code. As far as I remember in didn't put in any pass code , how do I settle this issue . Earlier updates were asking Apple ID but pass code for updating the new soft ware not known.

Hello Kewal,
Thank you for the details of the issue you are experiencing when trying to perform an update. I recommend trying to update using iTunes, and as always, it is a good idea to make a backup first.
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
Update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
Thank you for using Apple Support Communities.
Best,
Sheila M.

Transaction code for checking the capacity of a job

Hi,
Can anybody tell me if there is a transaction code for viewing the capacity of Job.
Thanks and regards,
Avinash.S

Hi Avinash,
I am not geeting what you want normally CM01 for w/c vise Load you can use.
Pls elaborate yr problem a little bit.
Umesh

How can we write the code for opening the command prompt and closing the

how can we write the code in java for opening the command prompt and closing the cmd prompt from eclipse (cmd prompt should close when click on the turminate button in eclipse)

rakeshsikha wrote:
how can we write the code for opening the command prompt and closing theBy typing in Eclipse (which you seemingly have)?

Code for calling the method at the same time

Hi
I have one of my java Bean where i wrote my logic for updating the data to DB and ......... I need to test this method with 2 simultaneous requests so that i can check for concurrency issues
I need a piece of code which invokes my java bean method twice at the same time ..There should not be any delay in between
Is this possible ??

Maybe you can test the concurrency as follows:
public class TesterClass {
public static void main(String [] args) {
    MyBean bean = new MyBean();
    MyThread t1 = new MyThread(bean);
    MyThread t2 = new MyThread(bean);
    t1.start();
    t2.start();
class MyThread extends Thread {
MyBean bean;
public MyThread(MyBean bean) {
     this.bean = bean;
public void run() {
     this.bean.updateMethod();
}

T-Code for changing the default Exchange Rate reference for creating PO?

Dear All,
Can somebody kindly give me the T-Code for changing the default
Exchange Rate reference for creating PO? Is there a Step by Step
procedure before changing the default exchange rate?
Thank you in advance.
Regards,
Gopesh

Hi
There is not such Tcode to change the default exchange rate from the PO.
If you want you can confugure the exchange rate in the following path in the IMG,
SPRO>MM>LIV>Incoming Invoice>Configure How Exchange Rate Differences Are Treated
Hope it helps you.
Cheers
Umakanth

T.Code for checking the total value of a material

Hi Experts,
Can anybody tel me the T.code for checking the total value of a material which is procured in a specified period?
Thanks in advance
Channa

Refer Tcode ME80FN click on Change Veiw & select Purchase Order History with this you can get PO-GRN-INVOICE Qty & Value details
Last button on Application tool Bar it is in line of filter, total etc icons
Also check below reports :
MC$G - PURCHIS: Material PurchVal Selection
MC$0 - PURCHIS: PurchGrp PurchVal Selection
MC$< - PURCHIS: MatGrp PurchVal Selection
MC$4 - PURCHIS: Vendor PurchVal Selection

What is the transaction code for see the Web Services available in SAP

Hi
I came to know that SAP has provided its own webservices... I need some information on that... If any one has documentation on that can u please send it to me... My ID is <b>[email protected]</b>.
What is the trasaction code for see the web services available in SAP.... Can any one help.. Please its urgent
Best Regards
Ravi Shankar B
Message was edited by:
RaviShankar B

Hi,
you can find Web Services (Enterprise Services) in the Enterprise Services Workplace (ES Workplace). The ES Workplace allows you to explore, test, and use enterprise services to make enterprise SOA tangible. Here, you will find all of the currently productized enterprise services by SAP.
Best Regards,
Boris Mueller
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/esa/esapreview">ES Workplace at SDN</a>
<a href="http://esapreview.sap.com:82/socoview(bD1kZSZjPTgwMCZkPW1pbg==)/flddisplay.asp">ES Workplace</a>

What is the T-code for Viewing the Payment Advices....

Hi,
What is the T-code for Viewing the Payment Advices....
Regards
Sap Guru

Hi,
Payment advice creation - FBE1
Payment advice Change - FBE2
Payment advice Display - FBE3
Payment advice Delete - FBE6.
Assign points if helpful.
Thanks,
Vasu..

Transaction Code for seeing the files in the Application Server

Hello All,
Can anybody please give me the transaction code for seeing the files in the Application Server
Thanks in Advance,
Regards,
LIJO.

hi
good
try with tcode AL11.
thanks
mrutyun^

LOCATION CODE FOR BOTH THE C DISK DRIVE AND D RECOVERY DRIVE ARE BOTH 0. WHY?.

Similar Messages

Maybe you are looking for