Location Code on Customer master

Hi,
Can someone bring out how is the Location code field used in Transportation track? Any documents with screen shots will be more helpful.
Thanks

Hi Abid - I believe you are referring to the transportation zone field on the Customer master General data. If this is the one, here is how it is useful:
Route Determination - Route determination is achieved by means of combination of fields <b>{departure country, departure zone, destination country, destination zone}</b> with <b>{Shipping Condition, Transportation Group, weight group(optional)}</b>. So if you are creating a sales order for a particular customer, you would have to have the customers transportation zone so that it can be used as the destination zone in determining route. Departure zone obviously will be of the plant from where shipment will originate.
Go to 0VRF and you will see this set up and there the destination zone is the one that will be the transportation zone from the customer master.
Thanks
Nikhil

Similar Messages

Not able to tag with holding tax code in customer master

Hi
while posting avance payments form customer i need to put tds amount in tds column.
for that iam trying to tag the withholding tax code in customer master.
but the Tax code field is greyed (blocked) and not able to edit.
Pls suggest what will be the wrong.
Regards,
Muniraj

Hi
all the configurations are in order.
But the field tax field is blocked(greayed as uneditable)
this problem is from past 3 days only.
earlier i was able to edit and assign the tax code properly.
i dont know what has gone wrong in between.

How to map company code for customer master in CRM

Dear CRM Experts,
The scenario is ,Customer Master is created in SAP CRM 6.0 and it flows to ECC 6.0 . After replicating the data to ecc i am manually assinging company code to customer master.Is there any option to map company code to crm customer master level.
Regards
Ashwin

Dear All,
The above requirement was address by Development.

Postal code in customer master

hi
i am having a postal code value.
need to place this value in postal code field of customer master while running bdc.
This field is having formating options specific to the country. I may have any number of countries.
How to format the value basing on the country and then consider for the BDC.
any function module or some other procedure
thanks
Ajay

normally not but in asset reporting there seems to be a relation between structure and report-name (not tcode)
go to tcode se11 and search for structures with search term FIAA_SALVTAB* and you'll find some structures.
The last part of the name (RABEST, RABEWG ) is the link to the report (RABEST01, RABEWG01)
hope that helps
Andreas

Industry Codes on Customer Master Record

Hello All -
Where do I actually say what my customers SIC code is.
I have the 5 industry codes exposes and I can use a drop down to say what codes they are, but where do I actualy type their codes.
Thanks,

Hi,
You can define the code in customisation path-
SAP Customizing Implementation Guide > Financial Accounting (New) > Accounts Receivable and Accounts Payable > Customer Accounts > Master Data > Preparations for Creating Customer Master Data > Define Industries
Regards

Define city code in customer master

Hi
where we can define city code.
XD01 > General data > Control data > Tax Information -
City code.
Regards\Adnan

Hi Adnan,
Are you taking about Juridiction code
If yes you can define juridiction code through this IMG path
SPRO>Financial Accounting>Financial Global settings>Tax on sales /Purchases>Basic settings-->define tax juridictions.
If not Can you please give us more details
I hope it will help you,
Regards,
Murali.

How to change the field sequence in Customer master record.

Dear Friends,
We are required to chage the sequence of customer master record fields that are available under different tabs of 'General Data', 'Company Code Data' and Sales Area Data.
Our client requirement is to place all mandatory fields in the first screen of customer master record. Here the intention is to save the user time instead going and clicking multiple tabs/screens to fill information on only one or two tabs. Please suggest us the availabe solution in SAP for this requirement.
Thank you
Raghu Ram.

Hi
Step 1: Take help of a FI guy and:
The fields can be suppressed by configuring through Financial accounting > Business Partners > Customers > Account groups.
Step2 : The challenge inyou project is to have a single tab with the allowed fields
A technical guy can only help you out on this . Again This would be a huge effort since first you need to change the code for customer master. As customer master is a source of data for various documents in SD , at each place you will have to do changes in th code...I don't think it is feasible.
Instead of doing this , create an external interface for transferring the value to SAP through BAPI. this would involve integration and may be as per defined SAP standards you can use CSV files or XML files for the integration process.
This would be a better option than fiddling with SAP system
Regards
Nikhil

Vendor in Customer Master Record

Hi,
Need to make the tie between vendor and customer. I could not find any fields in the customer master record (XD01 / XD02 / XD03) for this purpose. Any suggestions?
Thanks,
Douglas

The vendor link is located on the customer master in General Data --> Control Tab. It is at the top under account control. As the previous poster mentioned, if you are not seeing it is because it is supressed and you need to open it up through config.
The config is located in the following area: Financiall Accounting >Accounts Recivable / AP> Customer Accounts --> Master Data --> Prep for creating customer master data --> define account groups with screen layout
Kind Regards,
Jason

Report needed: Customer master TAXKD field changes

We are looking to track changes made to TAXKD (tax code) in customer master.   Is there any report we could generate weekly that would detail changes made to the field.
Also, we'd like what change was made. (i.e. customer number, date, field changed from 0 to 2)
Thanks,
Michelle

Hi Michelle,,
Those changes will be recorded in the CDHDR and CDPOS tables with your field name based on the dates..
and also with the Old value and the New value
from the CDPOS
pass
OBJECTCLAS = 'DEBI'.
OBJECTID      = Your document number "optional
TABNAME    = 'KNV1.
FNAME       =   'TAXKD'.
if you pass these thins you will get the in the fileds VALUE_NEW and VALUE_OLD
hope these informatino useful to you.
Thanks
Edited by: Prasanth on Apr 13, 2009 7:40 PM

IBAN Update Issue in Customer Master IDOC

Hi Experts,
We need to pass the IBAN No and Swift COde via Customer MAster Interface (DEBMAS) . So IBAN No and Swift Code is being correctly updated in E1KNBKM segment . But when IDOC is processed these IBAN details are not passed to Customer Master.
I have got OSS Note no. SAP Note 1097088 - Using ALE to distribute the IBAN: I tried configuring distributiion model as suggested in OSS Note . But still it's not working .
PS : Bank key and Bank Account No is not passed to the IDOC .
Please suggest how this issue can be resolved .
Regards,
Kaustubh.

Hi Kaustubh,
SAP Note 1097088 describes using ALE to distribute the IBAN using 'IBAN_SAVEREPLICA' message type, which needs certian ALE config detailed in the note.
However note isn't relevant as you plan to send details in DEBMAS, I'm trying to understand what field in E1KNBKM (Master customer master bank details and bank master) are you using to send the IBAN # and what table/field do you intend to save it in target system ?
Regards,
Abhijith.

How to fill the KNBW Customer master record (withholding tax types) in IDOC

Hi experts,
The creation of a new customer (intern) with idoc has status 51 with error : No batch input data for screen SAPMF02D 0610. When à use the WE19 transaction, in background step by step, the batch-input stops in withholding tax types. But those informations aren't compulsory and not filled!
1 - Why did the idoc stops in this step of the batch?
2 - If i had to fill those informations, i don't find a segment in the DEBMAS01 or DEBMAS05 to fill the informations. Should i create an new segment?
Thanks à lot for you responses.
Wail

Hi
Step 1: Take help of a FI guy and:
The fields can be suppressed by configuring through Financial accounting > Business Partners > Customers > Account groups.
Step2 : The challenge inyou project is to have a single tab with the allowed fields
A technical guy can only help you out on this . Again This would be a huge effort since first you need to change the code for customer master. As customer master is a source of data for various documents in SD , at each place you will have to do changes in th code...I don't think it is feasible.
Instead of doing this , create an external interface for transferring the value to SAP through BAPI. this would involve integration and may be as per defined SAP standards you can use CSV files or XML files for the integration process.
This would be a better option than fiddling with SAP system
Regards
Nikhil

Not able to create a customer master record with US as the country code

Hey All,
I am not able to create customer master data in the Transaction Code XD01/FD01 with the country code as US.
The error message for the same is *NO JURISDICTION CODE* COULD BE DETERMINED. I have checked the tax code settings but could not locate the problem.
I have checked the field in the account group(OBD2) but tax code is in optional status
and also checked the country settings for US in the transaction code OY17 still the same error message,
but when I tried checking the settings for a different company code's customer data base (us in county code)
I can see that there is a number mentioned in the address tab under tax jurisdiction field (beside time zone) which is not populating for this company code.
So, do anyone know where exactly we mention this number so that it populates in that field of address.
Hope am clear.
hope to receive a solution
thanks & regards
vinila

Hi,
You need to maintain the JURISDICTION CODE for country US. This JURISDICTION CODE code mainatanance purely FI/CO part.. it depends on the country's tax procedures.. Better take the help from your FI/CO consultant..
Menu path for Defining tax jurisdiction code
IMG -- Financial accounting -- Financial accounting global settings -- tax on sales and purchases -- basic settings -- define tax jurisdiction
reward if helps
Muthu
Edited by: Muthupandiyan on Mar 14, 2008 11:09 AM

Not able to create customer master data with country code US

Hey All,
I am not able to create customer master data in the Transaction Code XD01/FD01 with the country code as US.
The error message for the same is NO JURISDICTION CODE COULD BE DETERMINED. I have checked the tax code settings but could not locate the problem.
Request you to provide me with a solution.
Thanks & Regards
VK

Hey all,
I have checked the field in the account group(OBD2) but its in optional status
and also checked the country settings for US in the transaction code OY17 still the same error message, but when i tried checking the settings for a differnt company code's customer data base i can see that there is a number mentioned in the address tab under tax jurisdiction feild (beside time zone) which is not populating for this company code.
so, do anyone know where exaclty we mention this number so that it populates in that field of address.
hope am clear
hope to receive a solution
thanks & regards
vinila

"SYNTAX_ERROR" while creating customer Master T-code-"FD01

Dear All,
Getting an error "SYNTAX_ERROR" while creating customer Master T-code-"FD01". The error as follwoes
Short text :Syntax error in program "CMD_EI_API_CHECK==============CP ".
What happened? : Error in the ABAP Application Program
The current ABAP program "SAPLCMD_BTE_OUTBOUND" had to be terminated because it
     has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
     "CMD_EI_API_CHECK==============CP " in include
     "CMD_EI_API_CHECK==============CM04T " in
    line 82:
""LS_KNVP_NEW_PARTIAL-PERNR" and "<LS_KNVP_NEW>-PERNR" are not mutually"
    " convertible in a Unicode program. ."
The include has been created and last changed by:
    Created by: "SAP "
Last changed by: "SAP "
    Error in the ABAP Application Program
The current ABAP program "SAPLCMD_BTE_OUTBOUND" had to be terminated because it
     has
come across a statement that unfortunately cannot be executed.
Error analysis :The following syntax error was found in the program
     CMD_EI_API_CHECK==============CP :
    ""LS_KNVP_NEW_PARTIAL-PERNR" and "<LS_KNVP_NEW>-PERNR" are not mutually"
    " convertible in a Unicode program. ."
Information on where terminated :Termination occurred in the ABAP program "SAPLCMD_BTE_OUTBOUND" - in
     "CMD_CUSTOMER_BTE_1321_IMPL".
    The main program was "SAPMF02D ".
In the source code you have the termination point in line 330
    of the (Include) program "LCMD_BTE_OUTBOUNDU01".
Please help us on this,
Thanks in Advance,
Kumar.K

Dear Kumar,
please kindly apply the SAP note 1511101.
I hope this helps.
Mauri

Question about terms of payment of company code tab of customer master data

Hi:
As I know there are two places to be maintained terms of payment of customer master data, one is in billing documents of sales area data tab and I understood it will default to the one in sales order when you create, another is in company code tab and I don't know what does it be used for? Could you advise?

Hi
Along with the payment terms, the reconciliation account number and the dunning procedure is set specifically for the customer to the particular company code.
This would be the default data for all transactions specific to the customer in specific company code.
If you extend the customer to another company code, you can have different recon, payment terms etc.
All FI transactions are relative to these settings.
In SD when you process, any changes to the particular customer can be modified and it will supercede the default settings of PT
Reg
Suresh

Location Code on Customer master

Similar Messages

Maybe you are looking for