Location code on org.units

Hi group,
One of our clients need to register a code for location on their org.units. 14 characters, alphanumeric. Table of values to exsist behind the field.  Can you suggest any fields or infotypes we could use for this without making our own?  I checked into HRP1002, but we need more control than this gives us.
Any hints appreciated.
Kirsten

There is one attributes infotype 1222 but itu2019s a bit complex to work with. I have never used it but it is worth exploring. There is no IMG path for customization but you can access the table through transaction OOATTRCUST.
I think you can define a range of values, default values and so on. Not sure, how the users will perceive this. The last resort is obviously a custom infotype.
Hope this helps.
Donnie

Similar Messages

  • Org unit layer code in R/3 system

    Hi Gurus,
    Need your help to find the below objects pls help me out,
    1 Legal Entity
    2 Org unit layer code
    3 Org unit layer name
    4 Project manager user ID
    5 Project manager name
    Looking forward for ur reply gurus,
    Thanks in advance
    Regards,
    Shiv

    Hi Madhu,
    I work in the Dev sys, pls do let me know how to get the Org unit layer code.
    Regards,
    Shiv

  • How to find company code and its org unit?

    Hi All,
    For a given company code, i need to find its org unit. Please let me know the info type table or any FM.
    Thanks,
    SKJ

    Hi Ravi,
    Yes, i just came to know about that. I clicked on account assignment features button in PPOS_OLD and specified pers area, pers sub area and company code and found that an entry was created in HRP1008 for the company code with org unit.
    Thank you very much.
    SKJ

  • Position under Purchasing Org.'s Org Unit

    Hi,
    SRM :5.5, extended classic scenario
    When I look at the SRM Org. structure, I see the Position (S) under Purchasing Org.'s Org Unit  ?.
    What is the use of creation of Position under Purchasing Org's Org Unit ?
    Note:
    I did HR Replication in the past. I used to see the Position under the Company Code's org. unit. So that when anyone in the SRM org. structure creates a SC, it follows the hierarchy for the approval.
    With regards,
    Pranav
    Message was edited by:
            Pranav

    Hi Pranav,
    We should understand that we have role of "Operational purchaser" and Strategic purchaser" within the typical purchasing organization. These are the standard roles supplied by SAP.
    If you think of some complex purchasing organization catering to the needs of group of companies then it may have more than 3-4 levels within (May be some additional customized roles). This will decide the approval limits, authorities, powers and roles.
    Therefore, positions within the purchasing organization are created to group different roles and functions. Even I have positions in my purchasing org.
    Assign points as applicable.
    Regards,
    Ravi
    null

  • SD required org units

    Hello Folks,
    I know the standard SD org units required to be able to use SAP SD.
    But are org units Client and Company code optional org units when configuring for SD module? To be able to use just the SD module are these 2 units optional?
    I think company code is a must since customer master requires company code.
    Why I ask is because my trainer told me these 2 are optional and I noted this down on my notes.
    Business area is optional that i know. But is Shipping point and transportation planning points also both optional in SD?
    So, kindly just confirm for me please.
    thanks.
    Tom

    Hello,
    Pls refer following links :--
    http://www.youtube.com/watch?v=IeLWYfrFEIU
    client level , company code level , chart of account level
    Create client copy
    A client is organizational and legal entity in the SAP system. All the business management data is protected here because other clients can not access them. The main objective of the client is to keep the data isolated. The data in a client can be only visible within that client; it can not be displayed or changed from another client. In a physical SAP system there can be multiple clients. Each of these clients can have different objective or each client represents a unique work environment. In a development environment one client can be used as sandbox client (developers learn how to configuration using SAP environment), one can be used as prototype client (users do the customizing according to the companyu2019s requirements and testing) and another one can be used as the master development and configuration client (where the final configuration is done). A client has its own set of tables and user data.  There can be multiple clients in each of the system of SAP system landscape . Customizing is a method in the SAP R/3 system that helps the user to configure the functionality from SAP, according to the customer requirements. When the SAP objects are just used by only one client, we define them as client dependant data. There are some objects as ABAP/4 programs, which are used by all the clients in a SAP system. Those objects are called client independent data. The functional changes resulting from customizing can be client specific (client dependant) or general (client independent). You must know the fact that client independent customizing can create problems if the authorizations and the client strategy are not defined properly. For example if you have three clients in a development environment then the role of each client should be defined properly. One of these three clients should be used for client independent customizing and in other clients, users will not have the authority to do any client independent configuration.
    Hope it helps ..
    Regards/Rajesh

  • I have created org units wrongly in om, how to delete these org units ?

    plz can anyone help me.

    Hi,
    go to PPOME transaction code select org unit right click and delete.
    you can try this report RHRHDL00 but you need to delete or delimit existing relationship first.
    Regards

  • Via Code : Creating Org. Unit and Position and assignment of User ID to Position

    Hello,
    I am looking for code which will create Org. Unit and creates Position in it. Also the User IDs should be assigned to the Position via code.
    I do this via PPOC but would like to automate this process.
    Will appreciate your kind help.
    Thank you!
    Naina..

    Dear Naina,
    SAP has given the multiple option to create the units ( Org. Unit, Position, Job, cost center, etc). The best ways to use tcode-pp01 (Maintain object)
    Plan version- current Plan
    Object type-Org unit or Position or Job or other as per requirement
    infotype name- select object
    Time period :- 11.03.2014 to 31.12.9999
    then create- fill the required & save
    Example:- Creation of organisation unit
    Tcode-pp01
    Plan version- current Plan
    Object type-Org unit
    Time period :- 11.03.2014 to 31.12.9999
    infotype name-  Object (select)
    then create (F5)
    Object Abbration:- HR Department
    save
    After, system ask
    Relationship type -A002
    Type of related object- organisation unit (default)
    ID of related :- Give the eight digit number
    In the similar way, we can create other units.
    All the best!
    Regards,
    Rakesh

  • Position to inherit company code and cost centre from Org Unit

    Hi Team,
    I have entered the company code and controlling area in my root Org. Unit.  All the sub-ordinate org units that I've created have inherited this company code and controlling area, however none of the positions I've created have inherited them.  What do I have to do to get my positions to inherit this information from their org unit.
    Regards,
    Jeanette

    Hi,
    Check table T7SS0, there are three switches
    PPOM     INHIC     X     'X': PPOM: Obligatory Inheritance of Company Code
    PPOM      INHIH     X     'X': PPOM: Obligatory Inheritance of Contr. Area
    PPOM     INHS     X     Inheritance of acc. ***. features by positions
    So just check these switches that they are set in this table, and I hope your problem should resolve
    Regards,
    guds

  • Creating countries - Move Org unit its positions to another country code

    Hi Gurus,
    The client used a single production server for all the countries under its one country grouping(10) for different countries (US, Malaysia, Sinagapore, China, India, UK).
    We have only one country code for all the OM.
    One Organizational unit needs to move to another country(39), of which all positions, jobs, and the employees assigned to it also needs to move with the Org unit to new country. We are going to change the PA PSAs as well to new country groupings
    Is it possible, and if possible how to do it?
    thanks in advance....

    Hi Kumar,
    As already stated by you change the PA and PSA's accordingly as per the new country groupings as PA's should be assigned to company code within the same country grouping.
    In my knowledge I dont think you need to change anything with the Org Unit as OM objects don't refer to any country groupings as such. If you are using the account assignment infotype ( IT 1008) then you will have to change the Company code to your new company code as your new company code will have different country grouping ( 39).
    Your FI CO objects like Cost centers can be changed to new cost centers as per your requirement from the date you move your Org Units or Positions to new country groupings.
    We can also wait for other expert comments.
    cheers
    Ajay

  • Function that return Company Code given an Org Unit ID

    Hi folks,
    As per subject, is there any such function?
    I seem unable to find. Straightforward way is just select bukrs from hrp1008 using the Org Unit OBJID. However, that table only stores direct assignment. I.e. many Org Unit actually have the company code inherited from parent OU. So if my OU doesn't have account assignment, must go to its parent OU to find, if parent OU doesn't have, again must go up and search. And so on..
    If there's already such function, I don't want to re-invent the wheel.
    Thanks!
    Regards,
    Olyvia

    I know it's an old topic, but the answer could be helpful for others:
    use RH_STRUC_GET as suggested, standard WEGID OMACC_U will return the objects maintained in 1008 (including BUKRS, WERKS, BTRTL).

  • Org Unit Code

    Hi,
    I am using FM CRM_ORGMAN_ORGOBJECTS_FIND_3 to return the orgunit for a user. This returns the OBJID of the orgunit, but what I really need is the code of the actual orgunit. Is there another function module available that might do this for me (possibly using the OBJID)?
    Thanks,
    Bernard

    Hi Bernard,
    You can directly fetch it from table HRP1000, pass the objid you get from the FM CRM_ORGMAN_ORGOBJECTS_FIND_3 to HRP1000, the field SHORT gives you the code of the org unit.
    Hope this helps.
    Regards,
    Karthik.

  • Inheritance for the AAP Plans from a high level Org Unit code

    Hello,
    Did anyone know how I can create Inheritance for AAP Plans from High level Org Unit ? We have a lot of reorgs and we would like to turn on this fuctionality if it possible.
    Thank you in advance.

    Hello,
    Did anyone know how I can create Inheritance for AAP Plans from High level Org Unit ? We have a lot of reorgs and we would like to turn on this fuctionality if it possible.
    Thank you in advance.

  • 2 different sales org. for single plant and org.unit, can we?

    hi,
    we have this requirement to hava a 2 different sales org. for one single plant and one organization unit. is it possible just by assigning in spro path,
    spro-> CRM->master data->cross system assignment of organization units   <-|
    -> assign plant and storage location to service organization unit.
    when we change the stor.location it gives us the error message -
    target key must be different from source key.
    can any one please help me in this.
    thanking you.
    Ahmed.
    =======

    Hello BJ,
    I am talking about Intercompany sale - configuration where i should be able to sale from diff,Sales org ( of diff company code ) from one single plant ( of diff. company code )
    please refere my first mail on posting this issue to understand the requirement.
    Thanks for further advise.
    Nitin

  • Display Org Unit based on User logon in Business partner creation..

    Hi Gurus,.
    I have to assign Sales Org , DIV, Distribution Channel to the Business Partner in Sales Area data.  When I try system shows entire Org structure. But I want the Org structure should be displayed based on the user log on. Assume that, I am assigned to Shangai and creating Business partner for Shangai, the system should not show Beijing or other Org Unit since I belong to Shangai.  How to address this scenario thro standard customization?
    Is it common problem in CRM Webui(6.0 and 7.0).
    My Org Structure:
    Global
      China
         Shangai
         Beijing
       Nanjing.
    Thanks in Advance....

    Hi Varma,
    From my understanding of your problem, you can approach it in a different manner. Since, you mentioned that you will be receiving a delimited flat file around 5 to 6 times a day, you can probably consider coming up with a Report Program. This Report will consume the flat file, generate the necessary organizations, business partners, BP relationships and then create them and finish with the logging of all the messages ( Success, Error, Warnings, etc.)
    You can now schedule this report execution in a Batch Processing Job which will be executed as per the scheduled time and at the end of the day you can see all the application log files.
    This is just an approach and you can modify the report in your own way. I guess that the flat file will be located somewhere in the same place daily so that you can hard code the File Name and Path in the report.
    Regarding the Organization and Business Partner creation, you can use the standard SAP delivered BAPI's which will return you all the errors properly.
    Hope this helps.
    Thanks,
    Samantak.

  • Profile for an Org Unit.

    Hi Team,
    Is it possible to maintain Profile (PD) for an Org Unit. I would like to maintain location preference for at Org Unit Level.
    In this process I would like to maintain that for each Org Unit Level. The standard functionality doesnt support for this. Is there any Custom developement or configuration to make this happen.
    Regards
    <i><b><u>Sam</u></b></i>

    Hi Sam,
    If you are very sure that theres no standard functonality then you may follow these steps.
    1. SAP has a object type "F" as Location.
    2. Create Objects for the Object type F.
    3. Create ZRelation ship for e.g. A901 (Works for location) and B901 (Is location for).
    4.Maintain the relationship for the Object Type in Transaction Code "OOVK".
      Note: create 2 records for F -> 0 as B901
                                            O -> F as A901.
    5. Now you are ready for mainitaining the relationship between the 2 object type Orhunit and Location.
    ~Hope this Helps you...
    Bhawanidutt.

Maybe you are looking for

  • Displaying image in ABAP report "Urgent"

    Hi Everyone My requirement is as follows... On Material Master there is an image stored in document management system. In a report we need to display the material details plus the image from DMS system. I heard that there is some function module in t

  • Credit limit Block is not getting removed even after the releasing n VKM3

    Dear all, I got a Simple credit check  for my client i have set it in a particular order type. so when i create a sales order it is showing the credit limit has been exceeded and blocked the Sales order. and when i check in Va02 the block is set in d

  • Missing Aperture photobook order.

    I recently ordered two copies of a photobook I've been working on from Aperture. I can confirm that my bank account has been charged for the full cost of the order, but I have received no email confirmation nor can I find any evidence on my Apple acc

  • Class/Reflection/getFields()

    Dear Friends Can any one help me to find a solution for the following problem: I am using a class with inner class and table model. I wanted to get the list of all attributes from both inner and outer classes. All attributes are declared public. I us

  • Autocalculation of leave encashment through Termination workbench.

    Hi All,          I have done configuration  for TWB wher I have done settings as per  help. sap.com.Still when I executing TWB other amounts are coming properly but for LE the amount is not defaulting.Is there any way where TWB calculate & default th