"location" image name breaks rollover

One of my rollover images would not execute the swapImage,
and I figured out it was because the image name was "location".
I've fixed it, but I'm curious to learn why this happened. I know
"location" is a JavaScript object but I'm not sure that is the
reason.
Thanks!
Jeremy

"Links" is one.
Sonjay
On 4/19/06 12:16 PM, "James Shook" wrote:
> jeremyschultzwdm wrote:
>
>> One of my rollover images would not execute the
swapImage, and I figured out
>> it
>> was because the image name was "location". I've
fixed it, but I'm curious to
>> learn why this happened. I know "location" is a
JavaScript object but I'm not
>> sure that is the reason.
>
> It is the reason. In addition, IE has some secret
reserved words which
> can make image swaps fail.

Similar Messages

Help needed; underscore in rollover image name will not validate at WC3

GoLive CS on an Intel PC
UTF8 encoded, HTML 4.01 Transitional
I have several rollovers in a page created by using the GoLive palletes, and because GoLive automatically adds an underscore to an image name in a nested folder the page cannot validate at the WC3 site. What do I need to do so that the underscore will not be added automatically? I've tried adding a name/ID to the image before creating the rollover, but it disregards the name and uses what it thinks is best, adding the underscore.
The page is located here:
http://www.redshift.com/~lorac/sdy-55.html
I have attached three images that show the file names used and the results in the GoLive pallete. The first is a screenshot of the folder structure, the second is the placed image pallete and the third is the rollover pallete view.GoLive is set to strip all the GoLive code from the page before uploading, so the web version will not have any GL code.
A sample WC3 comment is:
Line 86, Column 226: value of attribute "ID" invalid: "_" cannot start a name
…pg');return true" href="#"><img id="_5502" class="img_border" src="images/jhj
✉
It is possible that you violated the naming convention for this attribute. For example, id and name attributes must begin with a letter, not a digit.
Do I need to unnest any folders with potential rollover images? That would be a real pain... considering the amount sections and images used in the site.
Thank you in advance for any help you can give.
Carol

I did as you suggested and added to the beginning of the default underscored name in the "name/ID" section and it was accepted. I changed all the rollover image names and uploaded the modified page, and was then able to validate at the WC3 validation site.
Thank you so much! It was an easy fix... a solution I had overlooked. Oddly enough this never occurs with a remote rollover, but that is probably because GL lets you name the base image without suggesting a name first.
Carol

Jquery zoom plugin that shows images above the zoomed image on mouse rollover

Hi all, after much effort and help from this forum I've managed to get a zoom effect to work on my image. It needed to be a loupe effect like this - http://www.dailycoding.com/Posts/imagelens__a_jquery_plugin_for_lens_effect_image_zooming. aspx
This is the plugin I've used.
Problem now is that I need images to appear above the image on mouse rollover. Currently - if I place images above this image and place my cursor over the image the zoom effect works but it ignores the images placed on top and just zooms in on the image shown below.
I would be very appreciative of anyone who can help me with this issue.
Thanks.
I wondered if it was possible to stop the jquery zoom plugin working when I mouseover the image on top of the map. Maybe that would be a solution?

> the image I have above the roll over I have just
> inserted shows the image that should be shown when I
roll over the image I
> have
> just inserted
url address please. words will not work for this.
random guess- check that the name and/or ID of every item on
the page is
unique.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

How do I find the image name and media_link for an ubuntu image in the Gallery?

I am trying to create VM using Python API.
I have a custom Linux image:
image_name = 'cloudN-Azure-20150205-os-2015-02-05'
media_link = 'https://portalvhds10ssz63zgvb9g.blob.core.windows.net/vhds/cloudN-Azure-20150205-os-2015-02-05.vhd'
When I used this image to create VM, it failed.
I would like to use the ubuntu 1204 image in the Gallery.
How do I specify the image_name and media_link in my Python code? Basically, where and how do I find the image name and media_link for an image in the Azure image Gallery?
Thanks in advance...

hi sir,
Did you try to use "List OS Image"? we can get the property form the results:
result = sms.list_os_images()
for image in result:
print('Name: ' + image.name)
print('Label: ' + image.label)
print('OS: ' + image.os)
print('Category: ' + image.category)
print('Description: ' + image.description)
print('Location: ' + image.location)
print('Affinity group: ' + image.affinity_group)
print('Media link: ' + image.media_link)
print('')
Please try it. Any questions or it doesn't work, please let me know.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Image name shows instead of image?

i have done several homepages in iWeb.
when i tried to make one new today, as usually i dragged the picture from media archive into the page.
instad of showing the image on my iweb page, the filename shows.
and i cant find whats wrong. i want to use the image ...right now i just see file name?

i read some about backing up iweb ...and located the file "domain.sites2"
might klicked it of misstake i dont know.
when i drag an image to the page its wierd...i just see the linkname still....if i leave mouse pointer over image name ill see the path to the domain.sites2 folder...
adding pictures not been used before maybe klicking that file will insert, images used earlier wont show, just file name...

Remote image change on rollover

I want to have a change of image in a different location to
where the rollover image is.
Any ideas?

Hello,
This may help.
It's an oldie but a goodie.
http://www.dwfaq.com/Tutorials/Basics/disjointed.asp
Take care,
Tim
"howdwil" <[email protected]> wrote in
message
news:g2rc32$9k2$[email protected]..
>I want to have a change of image in a different location
to where the
>rollover image is.
>
> Any ideas?

What has happened to 'Locate Images' in ID CS6?

Does anyone know what has happened to 'Locate Images' in ID CS6?
In CS5.5 when re-linking images which were missing InDesign used to highlight the image provided it was available in the folder, presumably to help out when you have folders of images. In InDesign CS6 this seems to have dissappeared and is somewhat annoying.
Also when editing an image from the contextual menu in ID CS6, and saving from photoshop or Illustrator you save over the last linked file with that name. For example we have a server which our work is stored on, we do not work directly from the server but take off the project we will be working on and do this locally then copy it back to the server overwriting with the latest version. If I, or anyone else, chooses to edit an image from within the ID doc locally once copied over, saving the edit results in the edit application (PS or AI) saving over the version that is on the server and not the local version on the Mac. So when copying over all of your hard work you are infact replacing it with a new ID doc but all the previous images & vectors etc. This makes for some confusion and took a while to work out what exactly was happening. We didn't seem to have that issue in CS5.5. Obviously we are aware of the issue now and remain vigilant, for the most part! But I wondered if anyone else had noticed this issue and how they may have resolved it?
Thanks for your help in advance.
Ryan

This is two separate issues. The highlighting is a behavior change and not for the better inthe opinion of many, but nothing you can do about it at the moment.
Links, on the other hand, have ALWAYS been absolute, as long as ID can find them in the path stored in the file. Even if you copy a links folder from the server to the local machine, ID is going to ignore it and use the links on the server as long as they are there and you have a connection.

Unable to locate image file in pixmap_path: "foo.bar"

I was trying to install fbpanel, after succesfully installing it i got this eror when trying to run it via the terminal.
This is the whole output of the fbpanel command:
$ fbpanel
/home/simplemind/.gtkrc-2.0:2: Unable to locate image file in pixmap_path: "foo.bar"
/home/simplemind/.gtkrc-2.0:3: Unable to locate image file in pixmap_path: "foo.bar"
/home/simplemind/.gtkrc-2.0:4: Unable to locate image file in pixmap_path: "foo.bar"
/home/simplemind/.gtkrc-2.0:5: Unable to locate image file in pixmap_path: "foo.bar"
/home/simplemind/.gtkrc-2.0:6: Unable to locate image file in pixmap_path: "foo.bar"
volume: can't open /dev/mixer
fbpanel: can't start plugin volume
Can anyone help me with this ?
thanks for the help

Yes, google, or our wiki. Don't be a help vampire. The forums are here to help, but you should first try to search. And either a google or wiki search with anything related to logind would get you just what you are looking for. (edit: this is not to say your original question wasn't a good one. It did tell you the file name and line number, you should use those to check the file yourself, but it was a fair question. I'm referring here only to the logind followup)
However, if being in the audio group doesn't help, neither will having a valid logind session. Do you have a /dev/mixer? When a program says it can't find a file, check to see if that file exists.
I have no /dev/mixer. But I did do a google (actually duck duck go) search with site:archlinux.org for this and the first entries were to threads on this forum with the exact same volume plugin issue you're having for fbpanel - and those threads have the solution.
Last edited by Trilby (2013-07-17 15:32:39)

Fix for iTunes Producer error message? Fixing unallowable image names in iBA Gallery

In Gallery I had image names with unallowable characters, e.g. "photo name.jpg". I changed the name to "photoname.jpg" and re-added it in Inspector>Interaction>Gallery Media. It still appears as "photo name.jpg"??? Even in a new Gallery Widget?
I'm new here so please forgive me if I am violating any protocol. I would greatly appreciate any guidence in correcting my error.
Thanks!!!
Gene Yore
aka eeyore

Thank you vinnyvg!
While trying to respond to this iTunes Producer error message,
"ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@5fd2c84f[userString=This<mailto:Error=com.apple.jingle.leghorn.fileformat.ValidationError@5fd2c84f[userString=This> file does not start with a start of image marker.]" at Book (MZItmspBookPackage)
The delivery of your book ended in error because there are image files that do not match the file extension type. Make sure that all image files inside the book file end with one of the following: .jpg or .png and that the image file itself matches the file extension type."
I did have a few tif images which I converted to jpg.
But, I ran across this posting which suggested I had other problems with my naming convention.
https://discussions.apple.com/thread/4788489?start=0&tstart=0
which says
GeePeeGee
This solved my questionRe: Uploading error codes - does anyone speak their tongue?
Feb 15, 2013 9:33 PM (in response to GeePeeGee)
So, it turns out, the problem with these png-images is the NAME. There are no restrictions, to name your pictures, but when you intend to use them in iBooksAuthor, make sure, that there are no "wrong charakters" in the name. You may use a to z charakters, 1 to 0 numbers and "-" and "_". That's it.
The file "St. Giles.jpg" has
a) a ".", which is wrong and
b) an empty space, which is wrong too.
When you use screenshots, things are getting even worse "Bildschirmfoto 2013-02-08 um 08.02.  15.50.19".
So, if there are error codes as specified, you have to go through the document, click on each and every image and then check the filename. As you see below, you must activate the image itself to see the filename (in this case the filename is corrcect)."
eeyor

Align title in bridge web gallery, change font of image names.

I have a web gallery that was created in Adobe Bridge (slide show template). I have most of the customization done that I want.... except for 2 issues:
1. I would like the gallery title to be right aligned rather than the default left. I have, in the past accomplished this... but for the life of me, I can't figure out how I did it now! Any help would be appreciated.
2. I have given the images names.... how do I change the font color of these image names that appear?
Thanks! Any help is appreciated.

I haven't used the Bridge galley, but my first guess would be dig into the gallery's CSS. It's either in a CSS doc or in the head of the gallery pages, but it's sure to be in CSS somewhere. This would be for colors and font anyway,,, I don't know if Bridge formats wilt CSS or tables, you just have to open the documents in Dreamweaver to see.
Lawrence Cramer - *Adobe Community Professional*
http://www.Cartweaver.com
Shopping Cart for Adobe Dreamweaver
available in PHP, ColdFusion, and ASP
Stay updated - http://blog.cartweaver.com

I want to add image name with the extension to db after upload, Can any body help?

Hello there,
Earlier in the week I created PHP photo/image upload form so clients will be able to upload to my site, it worked very well uploading image to designated directory to the C:/path/ but there is more that I would like to do with the form, and that is to write the image name with the extension, “Joplateau.jpg” for example in the database after upload. I wanted to use hiddenField but it's not working for me, may be i am not doing it right. If any one has an idea how to do this please let me know, and thanks in advance.
Thanks in a lot.
Joplateau.

Server-side coding questions are best answered in the Application Developers forum:
http://forums.adobe.com/community/dreamweaver/dreamweaver_development?view=discussions
Nancy O.

I want to add image name with the extension to db after upload in PHP, Can any body help?

Hello People!
Earlier in the week I created PHP photo/image upload form so clients will be able to upload to my site, it worked very well uploading image to designated directory to the C:/path/ but there is more that I would like to do with the form, and that is to write the image name with the extension, “Joplateau.jpg” for example in the database after upload. I wanted to use hiddenField but it's not working for me, may be i am not doing it right. If any one has an idea how to do this please let me know, and thanks in advance.
Thanks a lot.
Joplateau

Server-side coding questions are best answered in the Application Developers forum:
http://forums.adobe.com/community/dreamweaver/dreamweaver_development?view=discussions
Nancy O.

Pass image name and path to flash from html

Hello Flash Forum,
I would like to use Flash to display a larger image in an
HTML page that opens on top of a window with
thumbnail images. The thumbnail page will be a php page. If
the user clicks the thumbnail, I would like to open a swf that
diplays the larger image. I would like to pass the path and name of
the image to display to my swf. It would open a browser page (or
just a swf file) over the thumbnail page. The use could then close
the larger image display, and click another thumbnail, etc.
How could I do this? I have a swf file that will display the
image, but I would like to pass the image name from outside the swf
file.
Thanks for any tips,
eholz1

Hello jpsoul,
Thanks for the suggestion. I did see some info on the query
string aspect. I will take a look at the JavaScript
external.ExternalInterface class as well.
Thanks again,
eholz1

Change default image names

I'm not finding much regarding the new iOS with this question. We have the need to change the default photo name to date and time stamps on the iPhone 4S.. using the lates iOS... is this possible?
I'm not seeing any way to change image names at all on the phone.
Thanks.
Jill

Click on the image and then do Command+I (Get Information). Where it says 'Open with Preview', change it in the drop-down menu to 'Photoshop' and underneath than click on the button 'Change All'. All images of that type will now open in Photoshop.

IS it possible to print image name/Path in a different layer in my existing indesign file??

I want to print my image name and its path in a different layer in my indesign file.. Is it possible through script? Can any one help me how can I do this..

Hi Tom,
I'm pretty sure the IPTC data gets completely consumed inside an Adobe
PDF file, even if the original images have this metadata or extended
data (XMP) information. In other words, they do not make it through.
Try downloading a copy of Enfocus Pitstop - I know you can link to an
original authoring document (InDesign/Quark) through the CertifiedPDF
route but you cannot display the image name?
This is an interesting topic.
Jon

"location" image name breaks rollover

Similar Messages

Maybe you are looking for