Location missing in 0APO_PPDS_ORDER_01

We are using standard extractor 0APO_PPDS_ORDER_01 for extracting orders from APO/PPDS. The extractor is delivering all the orders in the planning table, but some of them are extracted with no location,
although a location is assigned in the planning table.
Did anybody find the same problem?
Leandro

Hi Leandro,
not sure if you were able to fix the issue?
I have a question regarding this extractor:
based on all the information I have, this extractor can retrive all orders generated in APO (like SNP: Planned order). Is this true?
I have issue now - SNP planned order are not extracted.
Hope you can help me!
Thanks and best regards,
Lilly

Similar Messages

Cannot locate missing media

I cannot locate missing media. When I try to locate it, and browse my computer I cannot find it

Have you deleted or renamed any directories on your computer, and you've checked the recycle bin/trash can in case they are in there ?
If it's not on your computer then do you have a backup of your library that you can copy the missing items back from, or do you have them on an iOS device to copy them from ? You can copy iTunes purchases back from a device via File > Devices > Transfer Purchases, or you might be able to redownload them via the Purchased section of your account (whether you can redownload them depends upon your country, the type of item, if they are still in the store, and if you've moved countries since buying them) - on the current version of iTunes (iTunes 12) click on your id towards the top right of the iTunes screen and then click Purchased on the popup :
For both copying back from a device and redownloading you will need to delete the entries from your iTunes library (where you are getting the 'unable to locate' message) for iTunes to allow you to do copy/redownload them.
To copy back from a device media that wasn't bought from iTunes you will need a third-party program on your computer to copy them back : Recover your iTunes library from your iPod or iOS device
Missing items : iTunes: Finding lost media and downloads - Apple Support

Storage location missing or incorrect Message no. L3432

Hi,
Previously the item we want to zero-in is under warehouse number WH1 under let's say plant 1000-storage location 1010. However this plant 1000 storage location 1010 was later on assigned to a new warehouse number WH2. During the migration period, this item was forgotten to be moved in the system from WH1 to WH2. Hence, we are trying to correct the quantity in WH1 now. However, when we try to post the count using LI11N, it is giving me Storage location missing or incorrect. How do we solve this?
If you have other suggestion on how to correct the quantity in WH1, please let me know. Thank you.

Hi Jackie,
Could you please perform the below steps?
1) Transaction SE51
Program SAPML03T, Screen number 0101 -> Element list -> Change
2) Select Tabstrip 'Special attr.', position the cursor on field LTAP-LGORT
and mark 'SET' parameter' and 'GET parameter'. Finally generate the screen.
Check this settings in your system and re-test.
BR,
Enrique

Start Location Missing

Hi,
When I send PO to SNC, ECC can send idoc to SNC,but SNC has problem. the issue is :start location missing. and ShipFromLocs is muti.
I check transprotation lane is ok.
how can I deal?
thanks again!
Cindy
Edited by: FangHua Lan on Nov 5, 2010 10:46 AM

Hi,
Thanks your reply.
I am new man for SNC.
1)What version of SNC are you working in? -
The version is SNC7.0.
2)What xml message are you using in SNC? -
Sorry I can't answer your question, can you help me how check ?
3) What is the error description in the log? -
the error :Assign Vendor '0000602292' muti ShipFromLocs( no single), can't determine start location for POXXXX/ITEM10.
4)Is the mapping done correctly in PI? --- Sorry I can't answer your question, how I can check?
I have a question: how to dtermine start location in the system?
thank again！

Locating Missing or Offline photos

Lightroom 4 can't located missing or offline photos, any suggestions?

You need to connect the external hard drive, disk or thumb drive where the images are held.

Lightroom suggestion (locate missing files)

In the dialog for locate missing file, if the file name is different, would be nice on occasion to be able to select 'use original name' I am sure meta data can be compared to see if they are, if fact, the same image with just a different name
And how did I come about this thinking? Well, the HD of all my RAW images got totaly corrupted - to the point I have a recovery place recover the data from the HD. Did retrieve all 1900 RAW files - only no file structure, and the naming went like FIL1.NEF through FIL1900.NEF
Needless to say, this is a major undertaking renaming back to the orginal. The saved meta data is a big help to use the Create Date and time to ensure it is the right image from the catalog, but sure would be nice if all I had to do was point to that image and tell LR to use the orginal file name, not the new file name....

If and what steps to take depends on what happened to the images. LR doesn’t move or delete images without your telling it to.
If the images are on an external drive, perhaps the drive letter changes based on what else is also plugged into your computer.
Were the missing images moved somewhere else? You can use your OS file-searching capabilities to look for them.
Were the missing images deleted? Are they in the trash or recycle-bin?
Do you work with more than one LR catalog? Where you might have done a Move Import in one catalog of the same images that were already in another catalog and so that second import will move the images so that the LR catalog you did the first import to won’t be able to find them.

Locate missing folder with new hard drive

What is the best way to tell Lightroom 1.4 where all your files are if all of them have been moved from an internal drive to an external drive?
The condition I am concerned about is that after I have moved these files I do not see same ole folders in the Library module (aka folders of images in all the old folders on the hard drive)
I have just moved my all photos from an internal to an external hard drive. I have gone through a few image by image and "locate(d) missing file". I would like to be able to do a master or one time "locate missing file" or really locate missing folder to locate everything all at once.
Is it possible to "locate missing folder or file on a a big scale? The files are the same same names etc.

yes that concerns me to. In the past when I have moved folders around "re-arranged" files or folders, I have successfully located the missing folder (file) on the hard drive thus directing Lightroom to this new location and all the sub folders do "fall into place" Since this has not been my experience with thisnew hard drive I am just wondering if ....well just wondering if I should back up Lightroom take off computer and re-load the software. I do not know the possible consequences of this action.
I do not import the files into Lightroom.

How do I "locate" missing music files on my pc?

After transferring all my contents from my old pc to my new pc, my itunes library had many many songs with an exclamation point next to them and it says they can't be located. Any help?

Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. If possible move the folders around so that the media ends up where the library is looking for it.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

Publish a document from Document Workspace back to source location - missing option in SharePoint 2013

We intend to use Document Workspaces for reviewing all our Policies & Procedures.
Once all the changes to the document have been made, I am trying to publish a document from a document workspace back to the source location but the 'Send to: Publish to Source Location' option is missing in SharePoint 2013.
So instead I try to use 'Send to: Other Location' and copy / paste the URL from the original document library but this produces an error.
Has anyone come across this and if yes, know of a workaround?
A prompt response would be much appreciated.
Thanks in advance.

Thank you so much for your prompt feedback and response.
Once I click on the file (from the Document Workspace) and go File | Send to | Other Location and then I paste the URL from the original document library and test it and the link works. It shows me the document library of the original location. When I keep
the filename the same (as I want it to override the original document with the new changes) and then I press OK and then it produces the error? I don't know what I am doing wrong???
When I look at the second hyperlink as below I complete all the steps but after step 5 which settings do I enable in the Content Organizer: Settings & Rules? I doesn't state what I need to configure?
Enable the Content Organizer in the Destination Site
To enable the Content Organizer in the destination site, do the following:
Browse to the site you want files routed to.
Select Settings, Site Settings.
Under the Site Actions Grouping, select Manage Site Features.
Activate the Content Organizer feature.
Click Settings, Site Settings, Site Administration, configure Content Organizer Settings and Rules.
Your prompt assistance would be much appreciated.
Thanks

How can I get PP CS4 to automatically locate missing assets?

Hello. I'm using CS4 on a Hewlett-Packard PC computer running a 64-bit Windows 7 operating system.
My computer recently crashed necessitating a visit to my friendly, local repair shop. When I got it back, I had to reload PP which I did but when I tried to start a project I was working on, I found that the folder where the assets were located was renamed, generating a "where is...?" dialogue box when I tried to open the project. I changed the folder's name back to what it was but PP was still unable to locate the assets. I tried locating all asked-for assets but there were just too many of them. What I need is for PP to locate them all automatically for me, once I point to the first one it asks for. I checked out a tutorial on this very topic and indeed there is a "locate others automatically" check box in the dialogue window but its for a Mac. On my PC there is no such check box. Is there some way I can get PP to locate the missing files automatically on my PC? Thanks for any help you can offer!

I used to be able to open DNG's in ACR just by double clicking them
Bridge preferences, general section. Under behavior put a checkmark in front of the option "double click edits Camera Raw settings in Bridge" and your back in business
Be aware that you can also use the right mouse click menu and choose open or open with... PSCS4 to open the files in Camera Raw via Photoshop. . While this is processing in the background you can select an other bunch in bridge and either double click or choose open in Camera raw and start a new series to edit in ACR via Bridge. So you can actually use them both together

Storage location missing in Inbound delivery

Hi ,
When I am getting the ASN or confirmation for my purchase order.
automatically Inbound delivery is getting created.
But here the problem is missing the storage location in inbound delivery.
I maintained the storage location determination (with situation) setup.
could you please help me.

The entry in OMB2 indicates that automatic creation of storage location data in the material master record at the time of the <b>first goods receipt</b> is allowed.
As well the storage location data is only created automatically if the quantity is posted to the "normal" storage location stock. If you have goods movements to special stock (for example, to sales order stock), the data is not created.
To my knowledge the PO generally does not have storage locations,while creating inbound delivery (manually or automatically) storage locations are copied from the material master. So, also check what S.loc. your material master has for the materials you are creating inbound deliveries.
Regards,
PATHIK

LOCATING MISSING FILES IN LR

When I click on the icon for a missing file, there is the option to click on "find nearby missing files." LR finds the file and a bar shows the "search for missing files has started. Howver it invariably gets stuck and never finds any other files. Each time, it starts but never finishes. If I relocate 10 files, I have 10 searches underway and nothing ever found. How do I solcve this problem?

It's not a problem moving the images in the OS. I do it all the time, as it's a lot faster than doing it from within LR.
Instead of doing individual images, right click on the folder instead. And use the top-most folder (farthest left) and it will do all the others below it, if you kept them in the same structure.
For example, if you have:
C:/My Pictures
     Holiday
     Whatever
         some other day
Then right clicking on My Picutres and browsing to the new location will "find" all of the folders below it.
Clicking on individual images will cause other problems, as when you find the folder, it will warn you about already having images in there.
I personally have my images down one level, instead of at the top (for example, C:), because then I can move the entire structure with one move and reconnect with one right-click.
Cheers!

After Effects CS4 - Rendering and Locating Missing Files/Reconnecting Media

I am needing to do the following and unfamiliar as I am new to CS 4:
1. Rendering
2. Locating a missing file/reconnecting media
Thanks,
"scubakgd"

Basics of Rendering and Exporting
Importing and Organizing Footage Items
Mylenium

LR5 Locate Missing Photos

Noob here. I'm using LR5 from the CC.
I recently (days ago) had to reload all my RAW files from external media.
Back when they were originally ADDed to LR, they had been renamed externally. The newly reloaded photos have the original camera filenames.
LR show all the previews with the missing icon, but if I do a locate folder, it finds nothing.
If I do a locate file (with find nearby checked) it finds just the photo I select (not great as there are thousands to find).
When the files were originally renamed 'PreserveFileName' was set in XMP.
Unfortunately LR does not allow me to rename the previews back to the PreservedFileName, nor does it allow locate/find the photos by the PreservedFileName.
I don't want to loose all the Develop/Metadata changes that have to saved in LR.
Is there something else I can try?

It is amazing when you attempt to redo/rethink things, just how fallible the memory is!
Not that it mattered in the end, but he XMP tags had not been set in the file, as I had stated.
They had been set in the COPY of the originals, which of course no longer existed
Could not find ‘SubSecTime’ in the LR Import/Rename, which is what had been used when the files had been renamed originally,
so the external rename process was once again used, BUT
this meant modifying the original RAW metadata, so ENSURED my backup was backed up.
Using a subset of the original files, copied, and ran through rename script.
The rename script, worked, XMP:PreservedFileName and ObjectName are now both set (as seen by external EXIF/IPTC viewer) to the original file name, and the new filenames look like what LR has.
Imported to a new ‘TEST’ LR. OK,
Moved source location, locate files at new location. OK,
BUT, Alas ….
Although, as it has been said elsewhere in this forum, RENAME saves the original filename to XMP:PreservedFileName, LR does not appear to honor the same (so even tho XMP:PreservedFileName is set within the files metadata, LR does not appear to read it).
If you try a rename at this point (to Original File Name), the name LR gives is the name at time of IMPORT.
LR does not show XMP:PreservedFileName in the Metadata display, but it does show the original filename in the Title.
Unfortunately for me tho, the final step is to rename them back to way the camera named them, so this doesn’t happen again.
Using the LR Title won’t work as Title has been changed within the LR database in many of my files.

Locate missing Chinese Font?

Hello all,
Is there any way to locate a missing chinese font?
When I open the file in Illustrator it tells me I am missing a chinese font and replaces it incorrectly.
Problem is that the font description is terrible "#bc#d0#b7#a2#c5#e9-WinCharSetFFFF-H".
I am told it is a "Standard Windows Chinese font" but I run a mac and so that doesnt help much either.
Is there a way in Illustrator or Adobe Pro to find the exact font name embedded (i.e. "wtcct.ttf")?
Or maybe to decipher these characters (#bc #d0 etc...)?
Any help appreciated!

Or maybe to decipher these characters (#bc #d0 etc...)?
That would probably be pointless... If it's "Standard Windows Chinese font", those hex values may be mapped to otehr characters in other languages/ fonts, so you still need to know the exact font. So more or less you still need to find out what font was used and install them. Kind of a circular argument here, you know...
Mylenium

Location missing in 0APO_PPDS_ORDER_01

Similar Messages

Maybe you are looking for