Location (Object Type F) as business partner

Hi,
My customer has requirement to create a corresponding BP record, every time a Location is set up.
I see the config settings for Persons & Org units, but not for Location.
Has anyone done this before?
Any suggestions/ workarounds?
Thanks.
Shivani.

Ignore my previous message.
You may better approach SAP by raising new message. As you said, current BP object creation in HR is restricted to P & O.
Thanks
Narasimha

Similar Messages

  • Missing default flag for communication type in crm/business partner

    Hello!
    We've connected a crm 5.0 with an R/3-system (4.6c).
    The crm-system is the leading system...
    While inserting a new customer in crm with phone- and fax-number.
    After "save" we've got red bdocs, telling us that the standard entry for communication type is missing.
    In crm 5.0 there's no standard flag for the phone number but a fixed range with from-date and to-date.
    The R/3-system needs the default flag (an "X") as a sign that the number is the standard number.
    Anywhere there should be the problem...
    Is here anybody with some advices for us?
    Thanks a lot in advance.
    Best regards,
    Ingo

    Dear Ingo,
    I assume you talk about error message XR002
    You have 3 options to resolve the issue:
    1. In order to avoid error message XR002 you must set the Standard
    Indicator Validity in the maintained telephone in BP transaction.
    You can find this indicator in the yellow arrow near the telephone
    number. Here you must press the button "Standard Indicator Validity".
    2. In customizing you have the possibility to switch off the time
    dependency of the addresses causing the XR002.
    3. The error occurs due to missing ADRU entries for the communication
    data (Email, Phone, Fax etc).
    The function modules used in data exchange assumes that there is
    an ADRU entry for all addresses. This assumption is partially correct.
    If an address is created in Basis release 6.40 and above, then for all
    communication data of that address ADRU entries will be created.
    But if a Business Partner(with address) is created in release 6.20 or
    below and system is upgraded to 7.0, ADRU entries for the communication
    data of thoses addresses are not automatically created. When the user
    opens that BP in change mode & modifies the communication data and
    saves it then ADRU entries for that BP's communication data are created.
    There exist a correction report and several notes, so I think if above info
    is not able to help, it would be better to open a support message!
    Regards,Gerhard

  • Object Types--Link to business object in SBWP

    Hi All,
    In SBWP, there is an option under path Document>Create Attachment>Link to business object, in this list there is no Purchase Order,Purchase Requisition, Maintenance work order.
    Need to know how to add these business objects to this list.
    Thank You,
    Manoj

    Hi
    check the following settings
    SPRO--> cross Appl  component>Document management>Control data>Define document types-->select doc type >define  object link--->enter PORDER     Production Order
    Regards
    Sujit

  • Link between a business partner and a device installed on a device location

    Hi everyone,
    Please guide me about the linkage between a BP and device location.
    Please guide me with table field wise linkage.
    Which table is being used for 'Device Location' and 'Premise' information.
    Please guide.
    It will be a great help.
    Thanks and Regards

    Hello,
    Table for Premise is EVBS
    Table for Device location is EGPLT..
    Business Partner is part of the Business Master data while the Device Location is part of Techincal master data.
    The installation is used to link these master datas...
    The following link has some graphical images that illustrates the master data and shows how the various objects are related to each other.
    http://help.sap.com/saphelp_utilities472/helpdata/en/f8/196c35a018d041e10000009b38f839/frameset.htm
    Hope this has been helpful.
    Regards
    Olivia

  • Creation of Interaction object programatically for Business partner

    Hello,
    How to create Interaction object ( BUS20004  )programatically for  Business partner ? If anybody worked on it , plz let me know how we can create it for BP.
    BOR object for InteractionObject is: BUS20004 Interaction Object
    Regards
    Sandeep

    Dear Sandeep,
    Please use FMs CRM_ORDER_MAINTAIN and CRM_ORDER_SAVE to create Interaction Record using the program.
    Thanks
    Vishal

  • Use of business partner functionality in combination with dual control

    Is there a generally agreed upon procedure to use the business partner functionality in combination with dual control? The problem is that when you block a business partner, the customer/ vendor master data aren't blocked automatically. You can then still use them in transactions, which leads to problems.
    So is there a way to make this work or a procedure to do this?
    Niels Vanwingh

    Thanks Masa,
    I did notice the 'Add external supplier from' in create supplier or bidder option. However there is a small catch and your experience may help.
    Let me explain the requirement and scenario here in SRM 7.
    We are implementing the Registration of Supplier scenario; both ROS and SRM are in same client. When a potential supplier registers themselves in the registration system, a BP number is created (an Internal number range is defined for this). After accepting the potential supplier in pre-select screen the purchaser has two options to transfer the potential supplier from the ROS system to SRM
    Option 1: He can select the accepted potential supplier from the supplier directory option and transfer the business partner to SRM. In this case the business partner number of the potential supplier is retained in SRM and a business partner with supplier and bidder tag is created. However the purchaser does not have any option to select which type of business partner he would like to create like supplier or bidder.
    Option 2: Purchase can go to create supplier or bidder option and choose the u2018Add external supplier formu2019 from the ROS system and create the business partner. The ROS business partner details are copied to the create supplier screen, but the purchaser have to provide an external business partner number for the supplier. This is because we have defined external number range for business partner for the vendors that are replicated from ERP to SRM.
    Objective is the ROS business partner should be retained in SRM with option to create as supplier and bidder and then manually create ERP supplier with same SRM BP number and map against SRM supplier.
    Is there any way we can achieve this?
    In SRM 5.5 with Manage business partner functionality we could achieve as system give us the option which business partner type we would like to create as well as retains the ROS BP number in SRM.
    Regards
    Sandeep

  • Extracting Business Partner information from CRM to XI

    What is the best approach to extract Business Partner information from CRM to XI

    Hi,
    by IDOCs of course
    you can create them just like I did:
    /people/michal.krawczyk2/blog/2006/11/14/xipi-data-type-enhancements-standard-business-partner
    (you jut need to change from proxy to ALE - another module)
    but bisically it's a standard to generate
    a business partner record and send it as an IDOC from CRM
    Regards,
    michal

  • How to "PREPONE" Business partner Valid from date (Role: TR0600)

    Hi Experts,
    I created BP on 4/03/2011 and using this BP I created one Commercial Lease in Contract but while activating the contract system showing Warning message as mentioned below.
    Role Obsolete: Master Tenant with Customer Account is only valid in period From 01.03.2011
    Message no. REBPBP035
    Diagnosis
    The validity of role Obsolete: Master Tenant with Customer Account is restricted for this business partner to the period From 01.03.2011. However, the object to which the business partner is to be assigned is valid for a longer period (validity period of object: 25.05.2010-24.05.2013).
    Procedure
    Extend the validity period of the role to cover period 25.05.2010-24.05.2013 in business partner processing or assign a different partner to the object for the period in which role Obsolete: Master Tenant with Customer Account is not assigned to the partner.
    Please provide me the solution  to overcome this issue.
    Thanks in advance.
    Br,
    CM

    HI CM,
    you have to change the date of assignment of the BP role accordingly (as
    mentioned in the warning message) if you do not want the message to   
    appear any more. Normally, the assignment of a BP to a contract should 
    cover the whole validity period and if this is not given, the message 
    arises.                                                                
    Please check the validity data of the role of the assigned business  
    partner. Therefore you have to go to the business partner maintenance
    screen and there check the validity data of the BP role.                                                                               
    As the validity data of the role aren't easy to find I have attached a
    screen shot for your information.    
    Hope this helps.
    Regards, Franz

  • How to create the Change Advisory Board business partner?

    Dear SolMan Gurus.
    How can I create a business partner Change Advisory Board and add a members to it?
    Thank you.
    Petr

    Hi Petr,
    just to make it a bit more clear, the Change Advisory Board (CAB) is not a type of a business partner, but a partner function. So you just need to create a standard business partner, e.g. an organizational unit as Prakhar suggested. Later on in your change document you can assign this org unit to the CAB-function. In another document the same org unit can be another partner function.
    If you want to enter a fix CAB-partner for a system you can do this in IBASE, transaction IB52. There are a lot of customizing possibilites for the determination of business partners.
    Kind regards,
    André
    Edited by: André Urban on Jun 2, 2009 11:54 AM
    Edited by: André Urban on Jun 2, 2009 11:55 AM

  • Business Partner IDoc

    Hi,
       Our business wants to send Business Partner information to be sent out via IDoc or any other means to third party system real time. Is there a IDoc/Message type available for business partner??We are creating Business Partner via transaction BP.
    Thanks in advance,
    Eswar.

    i guess u could use BUPAFS_FS_CREATE_FRM_DATA01.
    check this link mebbe u cud find something else.
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/step%2bby%2bstep%2bprocedure%2bfor%2bcreation%2bof%2bidoc

  • Use of organizational unit with org. Object type

    Hi,
    In What Scenario we will use organizational unit with org. Object type .
    Regards,
    Peter Son

    This technique works by matching codes entered in customizing tables against organizational objects in the organizational plan.
          E.g. A particular Sales Area can be related to an Organizational unit that represents all people in that Sales Area.
         SAP Organizational Objects
         Organizational entities (such as sales group, Distribution Channel, or purchasing organization) are represented by object types in the Business Object  Repository.
            The indicator organizational type in their basic data defines
            such object types as SAP Organizational Objects
         For Agent Determination, relationships are created between  SAP Organizational Objects (residing in BOR)  and the  Organizational Management objects.
         The agents are found by tracing these relationships.
    Thanks and Regards,
    Prabhakar Dharmala

  • Additional addresses as business partner

    Hi experts,
    I am working on CRM 2007.I have a scenerio where I have to maintain mutiple addresses to a business partner.Please suggest me ,how can I achieve this?
    Regards,
    Sunitha

    Hi Sunitha,
    You go to SPRO>Cross application components>SAP Business Partner>Business Partner>Basic Setting>Address determination>Define Address Type.
    Here you can maintain different address type for your Business Partner and can label them as per your business requirement.
    Regards,
    Priyadarshan

  • DMS-Object link to business partner (ISU-Module) required. Plz help.

    Hi all,
    I require to give an object link from DMS to Business partner of ISU module t code BP.
    So checked up in SPRO- Control data- maintain key feilds, & i found that BUT001 is the transparent table which is used here. so i inserted the same in object link for my document type, but there was no screen no defined to it so i gave the screen no as 500, the tab has appeared under the objectlink tab in DIR, but the screen is not appearing, it is blank, also in the business partner Transaction the DIR table is not appearing.
    What should i do? is there any other setting required, or the table which i have found is wrong. Plz help.
    Regards
    Tushar.

    Hi,
    Have you solved your issue? I want to have the same link. If you have please give me a step by step description.
    I saw the screen number for general business partner is 1249, maybe you can use this.
    Regards Camilla

  • Business Partner Locator

    In the Business Partner Locator, when search results are displayed, those BP's flagged as Not Released of Archiving are displayed in the results list in a different colour.
    Is there any way of customising this to colour the results of other BP's for instance those marked as say a Bill To Party?
    Many Thanks In Advance
    David

    Hi Juan.
    It appears that the pricing Procedure is not getting determined in the service Order Transaction.
    The reason could be 4 the combination of the 5 keys i.e. Sales organization, distribution channel, divison, customer Pricing Procedure and document Pricing procedure, it is not able to find the Prcing procedure.
    Check the five keys and Maintain that setting in:
    Customer Relationship Management-> Basic Functions -> Pricing -> Pricing in the Business Transaction -> Determine Pricing Procedures.
    Eg.
    Make two new entries here for,
    Sales Org: O 50000001
    Distibution Channel : SE
    Division: OT
    *Customer Pricing Procedure:
    *Document Pricing Procedure:
    Pricing Procedure: which ever u want.
    Sales Org: O 50000001
    Distibution Channel : SE
    Division: CO or make it *
    *Customer Pricing Procedure:
    *Document Pricing Procedure:
    Pricing Procedure: which ever u want.
    *Check Customer Pricing Procedure, in the BP master of customer 5000008, In the role sold- to party, Sales Area Data tab, Choose ur sales Area, go to the billing tab and maintain/check the Customer Pricing Procedure there.
    *Check document Pricing Procedure: In the Customizing of transaction type, choose category sales, at the third level check the Document Prircing Procedure in the Pricing Data block.
    If no divison is gettiing determined, keep it blank.
    Wish this helps.
    Regards,
    Shalini Chauhan

  • Mapping between Business Partner and BDoc type BUPA_MAIN

    Hi Experts,
    When creating a business partner system automatically generates BUPA_MAIN as its BDoc type.
    Can some one please let me know the mapping between business partner and the BDoc type BUPA_MAIN.
    I mean to say how BUPA_MAIN(BDoc type) is getting triggered while creating business partner.
    Maximum points will be rewarded.
    Thanks in advance
    Nadh.R

    Hi Nadh,
    This is done in SMOEAC transaction where you assign the subscription and replication objects.
    You go to SMOEAC and select the object type as Subscription and click on display icon and it displays the subscription ALL Business Partners and when you click on this or expand you find publication and when you expand this you find replication objects and against this you find the BUPA_MAIN bdoc type.
    Hope this helps and if so please reward points.
    Thanks
    Srini

Maybe you are looking for