Location of Camera Raw settings storage for jpg and tiff
Just upgraded to CS3 on Windows. Cannot figure out where camera raw setting information is stored for jpgs and tiffs, and want to archive settings when I copy the adjusted images to external hard drives. I see no sidecar, and cannot find the info in any other file or folder. David T Cox.
Since jpg & tiff are documented formats, there's no need for XMP sidecars...the adjustment settings are writtin to the file. Self contained, like DNG.
Similar Messages
-
I just made the switch to mac. I am have installed all the new PS6 CC and bridge and I am not trying to add some presets to my ACR but when I search for the folder to place them it is not there. From what I researched it says it should be under camera library/application support/adobe/camera raw/settings but I can only get to library/application support/adobe/ and then there are two different camera raw options I have checked both and there are not settings folder. If anyone can help me please thanks
You want your user library
Mac(user)/Library/Application Support/Adobe/Camera Raw/Settings
In finder click on Go then hold down the Option key and then click on Library -
Where to locate Camera Raw plug-in for Windows 7?
I have Adobe Photoshop and Bridge CS5. Been having problems viewing RAW files in Bridge with my D90. Where can I locate the Camera Raw plug-in and check if it is installed to only one location? Also, where is the correct location that Camera Raw should be installed? Thanks in advance!
With Windows 7 x64 here's where they're normally located:
64 bit: C:\Program Files\Common Files\Adobe\Plug-Ins\CS5\File Formats\Camera Raw.8bi
32 bit: C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats\Camera Raw.8bi
-Noel -
Where do I find the Camera Raw settings file?
I've been running Creative Suite 3 on a MacBook Pro. I just bought a Mac Pro so got my disks off the shelf to install on the new machine. That's when I found I have to deactive the programmes on the laptop in order to install them on the tower. (Which strikes me as outrageously restrictive. How many people work on a tower at home and a laptop for the road?)
Having gone throught the deactivation/activation process, I opened Photoshop to process some NEF files, and then remembered that my Camera Raw settings were somewhere on the laptop - but where ??? I assume there must be a file somewhere, but have not so far been able to find it.
Any ideas gratefully received.
ThanksVictor Burgin wrote:
I've been running Creative Suite 3 on a MacBook Pro. I just bought a Mac Pro so got my disks off the shelf to install on the new machine. That's when I found I have to deactive the programmes on the laptop in order to install them on the tower. (Which strikes me as outrageously restrictive. How many people work on a tower at home and a laptop for the road?)
Having gone throught the deactivation/activation process, I opened Photoshop to process some NEF files, and then remembered that my Camera Raw settings were somewhere on the laptop - but where ??? I assume there must be a file somewhere, but have not so far been able to find it.
Any ideas gratefully received.
Thanks
By "Camera Raw Settings file", I take it that you are looking for the develop settings for each raw file. These settings can be stored in two ways. The first and most common method is to store them as sidecar *.xmp files in the same directory as the NEFs. The other method is to store them in a centrally located Camera Raw database. One can change these methods via the Edit Preferences menu of either Photoshop or Camera Raw. Further information is here:
http://help.adobe.com/en_US/Photoshop/11.0/WSD94FB319-761D-4e9a-BC8D-24DF7EBC05B4.html
The storage location for this central database as well as the storage locations for other settings are shown in this Adobe link:
http://kb2.adobe.com/cps/405/kb405012.html -
Bridge freezes when applying camera raw settings to large number of files
I have a folder with 32,000 frames from a time-lapse project that I'm doing. I'd like to apply the same camera raw adjustments to all of these files, and so follow one of the two methods below - neither of which are working with such a large set of files:
Method 1:
Select all files, open in camera raw.
Apply changes to the first image
Select all images, then synchronize the changes to all other images.
Unfortunately selecting "Open in Camera Raw..." just leaves bridge to hang. It's using a lot of memory and processor time, so I would assume it's working, but there's no progress bar or similar to indicate that it is.
Method 2:
Open first file in Camera Raw
Apply all changes, and exit camera raw.
Select all files in Bridge, right click on one and select "Develop Settings -> Previous Conversion"
Unfortunately the final step again leaves bridge just thinking. I waited around an hour, closed bridge, but unfortunately when I opened it again there was no sign that it had copied the camera raw settings onto any of the other files. My computer's pretty slow (see below) but it should have written one xmp file in an hour.
Question:
Does anyone have any workarounds other than repeating the process 32 times for 1000 images at a time?
System Info From Photoshop:
Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
Operating System: Windows Vista 64-bit
Version: 6.0 Service Pack 2
System architecture: AMD CPU Family:15, Model:15, Stepping:2 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 1
Processor speed: 1808 MHz
Built-in memory: 8062 MB
Free memory: 4508 MB
Memory available to Photoshop: 7140 MB
Memory used by Photoshop: 70 %
Image tile size: 132K
Image cache levels: 4
OpenGL Drawing: Disabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: False.
OpenGL Allow Advanced Mode: False.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce 6150SE nForce 430/PCI/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1024, right: 1280
Video Card Number: 1
Video Card: NVIDIA GeForce 6150SE nForce 430
OpenCL Unavailable
Driver Version: 8.17.12.7533
Driver Date: 20110521050100.000000-000
Video Card Driver: nvd3dumx.dll,nvd3dum
Video Mode: 1280 x 1024 x 4294967296 colors
Video Card Caption: NVIDIA GeForce 6150SE nForce 430
Video Card Memory: 128 MB
Video Rect Texture Size: 4096
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\MARTIN~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
H:\, 279.5G, 50.4G free
D:\, 149.0G, 108.1G free
E:\, 74.5G, 46.1G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/01/18-15:07:40 66.492997 66.492997
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/02/09-16:00:02 4.0.93 66.496052
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1642
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 5,0,10,0
AGM.dll AGM 2012/01/18-15:07:40 66.492997 66.492997
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/01/18-15:07:40 66.492997 66.492997
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/01/18-15:07:40 66.492997 66.492997
BIBUtils.dll BIBUtils 2012/01/18-15:07:40 66.492997 66.492997
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/01/18-15:07:40 66.492997 66.492997
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 7.0
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Collada 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Dicom 13.0
Difference Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Embed Watermark 4.0
Entropy 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Extrude 13.0
FastCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Flash 3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Google Earth 4 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Kurtosis 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Maximum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mean 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Measurement Core 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Median 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mezzotint 13.0
Minimum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
MMXCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Picture Package Filter 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Pinch 13.0
Pixar 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Range 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0
Shear 13.0
Skewness 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Standard Deviation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Sumi-e 13.0
Summation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
U3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Underpainting 13.0
Vanishing Point 13.0
Variance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Variations 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
Wavefront|OBJ 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
WIA Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Wind 13.0
Wireless Bitmap 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONEThe files are only 2MP each, and I have the same issue when I apply the changes to RAW files and JPG files. The error occurs though before any changes are applied, before the images would need to be recached, as when the error doesn't occur the dialogue box I mentioned pops up asking what to change.
Your specs sound more then enough I would think. Do you have set the option to Write cache to folders when possible and if so could you uncheck that option?
I don't have experience with this kind of numbers but I do dump the Bridge cache manually on a regular base (every new cycle it seems to be more stable so more interval in the periods of dumping cache) but my main folder contains usually around 6 to 7 K of DNG files from 21 MP dSLR. This starts caching without problems but takes a few hours before done.
Can't use the option cache for folder due to a longstanding problem with error message to replace the CacheT file, hence my question about your setting.
Also I have set the option to previews Always HQ and in the prefs have set the option to build monitor size previews.
As said, don't know the large numbers but the 2 MP files are very small and it should be possible for Bridge I would think?
Did you also try to create a new folder and place the files inthere. Or divide them in to three folders for testing? -
I rented a Nikon D600 & D610 and CS5 cannot open the RAW files, i do not have any issued with my D700 RAW files. I am getting this error message -
Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information.
Can anyone please help?yellowmledbetter wrote:
Sorry, I am on a MAC. I downloaded the link you provided and it's giving the same error message as above. Running CS5.
The error message you gave is from Camera Raw. I thought you said that DNG Converter didn't work?
The link I gave you is an article on getting your raw files to open in Camera Raw. Did you read it? I lazily gave you the link because this is one of the most common problems in this forum, and I get tired of saying the same thing over and over again. I could break it down for your specific case, but I was hoping you could read through the article and work it out for yourself.
But, here goes:
Your cameras are newer than your raw converter, so it won't understand them.
CS5 comes with Camera Raw 6, which can only be upgraded as far as 6.7.1. You can find out which version of Camera Raw you are running in three ways: in the settings title bar (Cmd-K), in the plug-in title bar (press F to start/stop full-screen mode to reveal the title bar), or Photoshop's Help menu (About Plug-ins).
Downloading raw files from newer Nikon cameras with old versions of Nikon Transfer will actually make them unreadable in Adobe software. They can be fixed with a free utility. Again, it's all in the linked article. You should be using up-to-date Nikon Transfer, or Adobe Photodownloader to avoid this problem.
All being well, you have good raw files on your computer. You can convert them to dng using Adobe DNG Converter. IF you are on OSX Leopard or Snow Leopard, you CAN'T use the latest version, because Adobe stopped support. But, if you ARE on a later OSX, you can download DNG Converter 8.6.
DNG Converter is designed to convert FOLDERS of raw files at a time. You select a folder of raw files, and tell it to create DNG copies. BUT, you have to set up the converter before you start using it...
If you load up DNG Converter, you'll notice a button labelled "Change Preferences". Clicking this, you'll see the first option is "Compatibility". Here, you must select the appropriate setting for the version of Camera Raw you HAVE (see above). If you can't work this out, just pick "Camera Raw 5.4 and later". THEN pick a folder of raw files and convert them to DNGs.
All the above is already in the article, but I gave you a personalised response. If you still can't get it to work, please give us more than one sentence. Tell us exactly what you tried, and describe exactly what happened. Which version of OSX you're running, what device and software you downloaded your raw files with, how you used DNG Converter, and so on.
I really should be in bed. -
Camera raw settings change while rating stars
While I rate my images with stars in Bridge, I can see that the Camera Raw settings are changing the preview image as soon as set the stars in the Content panel are set. Why does the preview changes if the thumbnail is already generated? Shouldn't any newly generated thumbnail contain Camera Raw Default Settings as soon as they are displayed? Can anyone please tell me how to set-up Bridge or Camera Raw Preferences correctly in order to generate from the first time the preview images with my Camara Raw Default Development settings? Thank you for any usefull hint.
This is just a guess, but I would say that is the way it should work.
If you have Bridge set to HQ thumbs the thumbnails will reflect the current edit of the RAW image. Since lables are considered an edit (change of metadata), Bridge would have to rebuild the thumbnail to the current version, even though it does not reflect any visual changes. -
How do you clear the Camera RAW settings?
When opening a photo in Bridge, the photo opens in it's original state but then Bridge quickly applies settings to it and it looks darker. How do I stop this from happening? Can I easily turn it off and on? I tried Edit>Apply Camera RAW Settings>Clear Camera Raw Settings but it did nothing.
Any ideas?
Thanks!Hi and tanks for your answer
I´ve done it . I ´ve put all the settings to zero (brigthness, contrast , expose, etc..) and I´ve saved it as new CR default values, but the images continue "getting worse" (although not the same situation , now they lose all their "strong", i supose cause the zero values)
In my bridge thumnail i see the image as i taked it, right with the light and the color i want. but in the moment i select with my mouse the image to see it in preview mode, the image "gets worse". -
Manipulating Camera Raw settings with javascript
Is it possible to manipulate the Camera Raw settings with a javascript? I've been looking for info on this and have had no luck finding any.
What I'm doing is multiple conversions from a single RAW file set at different exposures, brightnesses, sharpnesses, etc.
Here are the basic steps:
1. Open RAW file in ACR.
2. Adjust for a baseline image.
3. Open image as an object in Photoshop.
4. Duplicate that object layer and run "edit settings" on this new layer.
5. Make adjustments ***
6. Click OK to apply new settings to this layer.
7. Repeat steps 4-6 on original layer as many times as needed.
I got everything working as I want, but I'd like to be able to automate step 5 for certain file types so that it will set some of the settings for me without going through the dialog to do this. The settings I'd really like to be able to adjust this way are exposure and brightness and if possible, I'd like to set them in relation to the original layer's settings for those parameters.Here is what I had in mind. Note the document is the same size as the raw file. This will place 5 copies of the raw file in the activeDocument, each with a different exposure.
var rawFile = new File( "~/Desktop/DSC_5396.NEF" );
var xmpFile = new File( "~/Desktop/DSC_5396.xmp" );
var exposures = ['-2.0','-1.0','0.0','1.0','2.0'];
for(var e=0;e<exposures.length;e++){
setExposure( xmpFile, exposures[e] );
placeFile( rawFile );
function setExposure( file, exp ){
file.open('r');
file.encoding = "UTF8";
file.lineFeed = "unix";
file.open("r", "TEXT", "????");
var xmpStr = file.read();
file.close();
loadXMPLibrary();
var xmp = new XMPMeta( xmpStr );
xmp.setProperty( XMPConst.NS_CAMERA_RAW, "Exposure", exp );
file.open('w');
file.encoding = "UTF8";
file.lineFeed = "unix";
file.write( xmp.serialize() );
file.close();
function placeFile( file) {
var desc = new ActionDescriptor();
desc.putPath( charIDToTypeID('null'), file );
desc.putEnumerated( charIDToTypeID('FTcs'), charIDToTypeID('QCSt'), charIDToTypeID('Qcsa') );
var offsetDesc = new ActionDescriptor();
offsetDesc.putUnitDouble( charIDToTypeID('Hrzn'), charIDToTypeID('#Pxl'), 0.000000 );
offsetDesc.putUnitDouble( charIDToTypeID('Vrtc'), charIDToTypeID('#Pxl'), 0.000000 );
desc.putObject( charIDToTypeID('Ofst'), charIDToTypeID('Ofst'), offsetDesc );
executeAction( charIDToTypeID('Plc '), desc, DialogModes.NO );
function loadXMPLibrary(){
if ( !ExternalObject.AdobeXMPScript ){
try{
ExternalObject.AdobeXMPScript = new ExternalObject
('lib:AdobeXMPScript');
}catch (e){
alert( ErrStrs.XMPLIB );
return false;
return true;
function unloadXMPLibrary(){
if( ExternalObject.AdobeXMPScript ) {
try{
ExternalObject.AdobeXMPScript.unload();
ExternalObject.AdobeXMPScript = undefined;
}catch (e){
alert( ErrStrs.XMPLIB ); -
I need to know the file location of Camera Raw within PS CC.
Would like to the know location of Camera Raw .8bi file within PS CC. (.../Program files/Adobe/. . . . ???) Also, the location of the compressed download of PS CC updates would be helpful. Using Windows 64 bit vers.
ThanksOn a 64 bit Windows system, for Photoshop CC:
64 bit Camera Raw plug-in:
C:\Program Files\Common Files\Adobe\Plug-Ins\CC\File Formats\Camera Raw.8bi
32 bit Camera Raw plug-in:
C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CC\File Formats\Camera Raw.8bi
I don't know if there's a special place for downloads; I'd suggest checking the TEMP folder.
-Noel -
How do I install camera raw 4.6 (for Nikon D90) in Elements 6 for a Mac?
I need to install camera raw 4.6 (for Nikon D90) plug-in on Elements 6 for at Mac? I'ved downloaded the plug-in but it does not seem to work. I've got Elements 10 on my desktop Mac but I am using Elements 6 on an older iBook G4. Any help will be appreciated. thanks.
For PSE 6, get the .plugin out of the download, then go to your hard drive>library>Application Support>Adobe>plug-ins>file formats and remove the old plug-in, then put just the new .plugin file in there instead. Older versions of PSE can't update ACR from the help menu the way PSE 10 can.
-
i have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can anybody help me.
You'll need to update to at least ACR 8.2 for the 70D to be recognized. The normal way to update PSE12 to the latest CR is to use Help / Updates in the Editor which should update to ACR 8.5.
According to Adobe's website PSE12 shipped with ACR 8.1 and you say it says yours is reported as ACR 8.0.
Are you using PSE 11 and not 12? PSE 11's maximum ACR version is 8.0. -
Camera RAW plug-in for Photoshop 8 Doesn't Work
I downloaded Camera RAW plug-in 5.6 following the instructions, for use with a Canon Rebel EOS xTi. The file downloaded and was pasted in the proper folder ( C:\Program Files(x86)\Common Files\Adobe\Plug-Ins\Elements 8\File Formats\ ). And when the RAW file still didn't open I downloaded Camera RAW plug-in 6.2 and pasted in the same folder as above. When I couldn't access the plug-in from Photoshop Elements 8.0, I tried Help-Updates. I still can't access or open RAW files. How can I fix this problem?
Make sure you delete all previous versions of the 8bi file from the File Formats folder before you start.
Make sure you use the correct download link:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4810
Extract files from the download folder then drag or copy the new 8bi file into the File Formats folder.
You can confirm successful installation by opening Full Edit and clicking Help >>About Plug-in >>Camera Raw -
I just trying to search app for my nikon d4s for photoshop cs5. And I trying to download the camera raw 8.4, 8.5 and 8.6 but no one was success. Any body can help ? I am use window 7 on my desktop.
there is no such thing. Camera Raw is specific to certain versions of PS. 8.x will never work in CS5. you need to update your software or settle on using the DNG converter.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Mylenium -
How to Update Camera Raw 5.0 to Camera Raw 5.6 for Photoshop CS4
How to Update Camera Raw 5.o to Camera Raw 5.6 for Photoshop CS4?
I can access the the download button but after I depress it
I need specific step by step instructions from start to finish
Morty
[email protected]It would help us if you told us what operating system and version you are using.
generic instructions
Windows
1. Right click on the downloaded Camera_Raw_5_7_updater.zip
Click on Extract All
2. In the Extract All dialog check Show extracted files when complete, then click on Extract
3. When the next window opens showing the extracted files, right click on the Setup.exe and click on Run as Administrator.
In the User Account Control dialog click Yes
Just follow the directions in the install dialog when it opens
Mac
1. Double click on the downloaded Camera_Raw_5_updater.dmg to mount the dmg image
2. When the next window opens, double click on the Setup.app
In the next window enter your password
Just follow the instructions in the install dialog that appears
I didn't take screenshots of the installer dialogs, because i already have the 5.7 camera raw plugin installed
Maybe you are looking for
-
Use Tax for Free of charge items
Here is the scenario: In our Business, there is a process to give a Free item with mostly all the products sold online. In SAP, we will create regular sales order with 1 line item as TAN and other item category as TANN. The Business wants to calculat
-
Unable to download and install apps from iTunes store !!!
I am in Bosnia and Herzegovina. When I try to install free or purchase apps from apple iTunes store, i click on the desired app and the window pops up where i need to enter and confirm my data, all goes well until the moment when i need to confirm my
-
After Effects Ram Preview Drops Frames , Using Strangely Too Much Ram
System Specs : CPU : Core i7 4770k Memory : 16 GB DDRIII Graphic Card : GTX 770 4GB RAM Storage : 256 GB SSD + 2 TB HDD OS : Windows 7 SP1 Using After Effects CC 12.2.1.5 NOTE : NOT ANY ADDITIONAL HARDWARE IS ATTACHED TO
-
External Procurement with a Valuated Sales Order Stock
Hi Experts, I read the following in SAP Help, For external procurement with a Valuated Sales Order Stock, system generates a purchase requisition from the sales order. If you are using a valuated sales order stock, the externally procured material is
-
I was trying to Import photos from my Facebook photo to my MacBookAir and now all i got is lots of back round photo. Please Help me out to delete them.Some or all of the photos you selected were downloaded from your published albums. You can only vie