Location of high speed USB port on Envy 17D

I'm sure this is a dumb question and the answer must be very obvious to everyone but me, but which of the USB ports on my HP is the high speed (3.0) port? If someone can direct me to a 'photo' or 'diagram' or just tell me whether it is on the left or right and the front or back one, I'd sure appreciate it.
Thank you!

Hi,
The manual is very old, I can not find a new one.
http://h10032.www1.hp.com/ctg/Manual/c02160120.pdf
But based on this, it has 3 USB3 ports and ONLY one USB2 port therefore it's much easy to find out. 75% chance you will get the right ports.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

High speed usb port?

I have a older laptop. 5 or 6 years old.
When I plug my ipod into the usb port a message pops up saying that this devise could preform faster, if I had a high speed usb port on my computer.
Could this be the problem why I cant put songs from itunes onto the ipod?
I get this message "The ipod "its name here" cannot be synced. The disk could not be read from or written to.

You have a different problem. The iPod can work with the slower USB1 ports but data transfer is painfully slow. It seems that your iPod needs to be restored back to factory settings.

High Speed USB Ports

Every time I plug my iTouch into my PC, I get a notice that I should use a high speed USB. Yet, there are only three USB ports on the laptop and all of them trigger the same alert. What am I missing? Are the high speed USB ports attached to the Docking Station?

What kind of Thinkpad do you got (for example T61, Type/model: 4236-3EG) and what OS do you use?
Did you always have this problem or something that started recently? Did you also try other USB devices that give the same error?
-gan

Must I have a high speed USB port?

Every time i connect my brand new 60 gig ipod to my computer a bubble pops up saying "A high speed device is plugged into a non-high speed USB port" Ive seen this before with other devices and its never been a problem, however with this ipod plugged in my computer freezes up, i can still click stuff and all but nothing happens, and then when i disconnect the ipod everything pops up and its like it was never frozen....very wierd, like the screen freezes when the ipod is plugged in. Anyone have any advice for me?

No, you do not have to have a high speed usb port to use the pod or iTunes. It really does make it much faster though, but it is not necessary.
I get the same bubble at home where I have the older 1.1 usb ports. It takes about 3 to 4 minutes to read my Pod and associate it with my PC. This happens everytime. The more you put on it, the longer it is going to take.
On my new laptop which has 2.0, it takes 25 seconds to register everything. That's 3500 pics and 16 gigs of music; Hence you can see why 2.0 is on my christmas list for the desktop lol.
Try giving it at least 5 minutes to fully register. The first time you do it, it always takes a long time. Also do you have any other USB things hooked up that may be conflicting with the pod?

No high-speed USB ports?

When my I-Pod Shuffle is plugged into either of the two USB ports in the back of my computer's modem, my computer states that there is a "High Speed USB Device attached to a non high-speed hub" and that "There are no high-speed USB host controllers installed on this computer". So I take it I'm going to have to buy some sort of high-speed USB device to fit the I-Pod, but I have no earthly idea where I would buy one!

No - you dont need a high speed port it will work fine with a 1.1 (low speed) port. It will just take a lot longer to load songs on your shuffle.
As long as it charges (high powered port is needed - you can have high powered port which is low speed) you shoud be OK.
If you dont like the transfer speed you can probably take out the USB card that you have and replace it with a 2.0 card - a fairly easy and relatively cheap procedure, but if you dont feel comforatble doing it ask a freind who is a bit more tech savvy.

Do you need a high speed USB drive to effectively use a 5G ipod

My new 5G is working on my newer dell comp with the high speed, but not working on my older vaio without a high speed drive. Thoughts?

My new 5G is working on my newer dell comp with the high speed, but not working on my older vaio without a high speed drive
Do you mean a high speed (USB 2.0) port?
Your hard drive is not USB and it is fast enough.

"This High-Speed USB device is connected a non High-Speed USB Hub" pops up!

Hi. I have an iPod mini and a Window XP desktop. I've checked my computer as stated in the forum. I know I have a USB 2.0 port according to one of the posts I've read, but I guess it's not a high speed LOL. So I was wondering if it takes more time to fully recharge the iPod mini with a non High-Speed USB Hub than it does with the High-Speed USB Hub.
Windows Home XP w/ non-High Speed USB 2.0 ports Windows XP
Windows XP

hiya!
This High-Speed USB device is connected a non High-Speed USB Hub
hmmmmm.
let's check through some of the possibilities in this document:
Tips for charging iPod and connecting to your computer
love, b

No high power USB port???? help??

Hi people, I just got my new Ipod! but..... I installed everything...and this says I don't have a high power USB port? Can you help me see if I really do have one or give me some help???? This is making me very unhappy
thanks..

Ok, I do NOT have a high power USB, but when i connect my Ipod it shows in windows explorer but not in itunes. I tried to use explorer to put songs on the Ipod, and it shows it is on there in explorer, but not on the Ipod...
How can I get songs on it??

Has anyone ever experienced the situation where plugging in the USB connector to the charging source (high-power USB port or Apple charger) halfway, then pressing it in firmly, results in the iPad not charging?

Has anyone ever experienced the situation where plugging in the USB connector to the charging source (high-power USB port or Apple charger) halfway, then pressing it in firmly, results in the iPad not charging?

It's highly likely that there is a poor connection in the phone - either a pin in the dock connector or internal wiring harness. No software fixes or "tricks" would work, but I would recommend restoring in iTunes, first using a backup and if needed restore as a new phone.
Otherwise, opening and repairing the phone takes some tech knowledge that can't be relayed here. Apple doesn't repair phones other than replacing batteries (not inconceivable that you have a bad battery), but offers "out-of-warranty" replacement (refurb) phones for $149 (US). 3rd party iPhone repair centers may be able to fix it for less. Google to find them,
Tried soft and hard resets
FYI, there's no such thing as "soft" or "hard" resets in iPhone terminology. There is only one phone reset. You'll see those terms thrown around by technically ignorant posters, but they mean different things to different people and are actually archaic, 1980s PC terms that have nothing to do with iPhones.
See the User Guide, Appendix B.

IPod high speed USB

Everytime I have plugged in my iPod to my computer, a little message comes up that says "high speed device plugged into a non high speed port". The iPod still functions, but it takes longer to load and stuff. Has anyone else had this problem? Is there a way to update my usb port to high speed? I have a pretty new computer, about one and a half years old.

This means that you are connecting your iPod to a USB 1.1 port. It's not a problem at all... just indicating to you that your iPod is not going to perform as fast as it could, because you don't have it connected to a USB 2.0 port.
There's no way to upgrade a USB 1.1 port to USB 2.0.
If your computer doesn't have USB 2.0 ports, then your only options are to buy a new computer with USB 2.0 ports... or find a USB 2.0 PCMCIA adapter that will work with your computer and the iPod. There are a handful of them out there, I just don't remember which ones.

High Speed USB ???

I have a Mac Book Pro 2.16GHz model that I got about a year ago. All I need to find out is WHAT USB port is the high speed port?
As you sit in front of the laptop as normal would it be the port on the right or left?
Thank you.

I believe they are all the same speed. One of the high speed buses is used by your iSight camera. The other, I am going to assume is for use with the express slot. If you want to get serious speed I would try firewire. The firewire 800 would be your fastest option, but firewire 400 isn't really that much slower.

How can a session be setup between two MacBook Pro's at different locations on high speed Internet connections, be setup to have a live recording session in Logic?

My partner and I live on opposite sides of the valley here in Phoenix. About 50 miles apart one way. We are Musicians and are working on a commercial for television, and would like to know if there is a way, between FaceTime and Logic, that we can configure our MacBook Pro's to record sessions together without having to be at the same house? When we FaceTime, he can hear my keyboard through his headphones, but we can't seem to get the signal routed into Logic and register to a track when its record enabled. Is there a way for us to save gas, and record at seperate locations, so he can engineer me and I can engineer him, while we build this project in Logic and Final Cut? Here is what we are using, we have nearly identicle setups, which was planned so we might be able to do something like this. Both of us are using Mid 2012 15" MacBook Pro's with 2.6GHz Intel i7 processors and 16GB RAM. The only difference between the two MacBooks is that his has an Optical Drive, but I removed mine and replaced it with a 2nd SSD Drive, so I have two Samsung 840 Pro's each with 512GB in my MacBook Pro. His just has one Samsung 840 Pro with 512GB. We both use Focusrite Saffire Liquid 56 Firewire Audio Interfaces, and we both use Logic Studio 9 Academic. I don't know if you need to know what we are using in order to help us figure out how to configure the MacBooks for a live session, so I figured I would give you those details just in case. If you need any more information, just let me know? Oh, we both have high speed cable Internet connections. Mine is 150Mbps speed which is the absolute fastest I can get in my area. And his is only a 50Mbps speed line.
Again, what we are looking to do is have a LIVE recording session, in Logic, with him at his house and me at my house. When we FaceTime each other, we can pretty much hear each others keyboards as if they were part of the conversation, and as crystal clear as we can hear our own when recording, but we can't seem to record enable an Audio track in Logic and route that keyboard signal into Logic and record it so we can engineer each other without either one of us having to drive to the others house, to be there to do it. If any of this even makes sense, I'm not quite sure how to better explain it. So hopefully you get what I mean, otherwise just say so, and I will try to do a better job explaining it. :-)
Anyone who can help us with this little problem would be greatly appreciated, and quite a hero in these two humble Musicians Worlds!! So from both of us, THANK YOU in advance for any input you might be able to give us. I look forward to hearing any and all suggestions.
Scott

Hey Scott
You and ALOT of people are attempting to do this, myself included.
Unfortunately at this point (to my knowledge) it's a pretty CRAP setup involved that will likely leave you frustrated.
HOWEVER:
A few things CAN be done:
IF you are getting live audio from your partner over the internet, you can re-direct that audio directly into Logic using a program called SoundFlower.
There are a few alternatives to SoundFlower, like JackTrip, and.....(the name eludes me)
(SoundFlower is from a company called Cyling 74 who also makes Max MSP. )
Once in Logic, you set your audio inputs to the track to be Soundflower. (either 16 inputs, or in this case 2)
That all being said, regardless to speed, you are still going to experience latency in the connection, and THAT is the part that will likely drive you to the mad house.
THIS all being said, I believe there are websites out there that are set up to actually do this kind of thing, (at least there WERE) but likely membership costs, and other "hidden" problems that you only learn about after you have signed on the dotted line. (Hopefully I am wrong?)
If you don't need to do a "live jam", there are always solutions like DropBox that work very well for exchanging large files quickly.
If you want to record live MIDI input from his keyboard, I am unaware of any solutions for this.
Due to the popularity of the iPad, you might want to look into the App store, and see if there is something available.
Good luck!
Treatment

Ipod 5th Generation charge icon not displaying when in hi-speed usb port

Interesting dilema. Charge icon displays when Ipod first connected, when updating, but as soon as it has finished does not show battery charge icon (lightning bolt)? Therefore I can only assume it is not. This is with battery showing 1/2 full. USB is hi-speed according to PC manufacturers info. Can anyone help?

I am having the same problem. I just purchased an 80GB ipod. I only get the lightening bolt when my ipod is syncing with iTunes. My battery indicator shows half full. How do You know if the battery is charging?

Locating iphone connection to usb port

having problems with finding the connection from computer to iphone 4

The cord is attached to the iphone at the bottom and the usb end goes to the computer. After that it should start the sync.

High-Powered USB port

Does anyone out there know if the S10 has a high powered usb port? Can't seem to find an answer one way or another.
Thanks for the help!
Solved!
Go to Solution.

http://support.apple.com/kb/HT4060
have a read of this article.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Location of high speed USB port on Envy 17D

Similar Messages

Maybe you are looking for