Location of State code in SAP B1

Hi
where is the location of state code in SAP B1 so that i can fill the correct codes of the state coz iwant to import BP and error while importing i get is wrong state code.

Administration -> System Initialization -> Company Details -> General Tab ->Local language
Click on the Dropdown box next to 'State'.
Scroll to the bottom and select 'Define New'
This will open the 'States - Setup' screen

Similar Messages

  • How to locate the source code which populate the SO number?

    Hi,
    For example:
    In T-code: VA01
    Put your cusor on the screen field : Standard Order
    Then press F1, get the technical info of this field as below shows:
    Screen field     VBAK-VBELN
    Program name     SAPMV45A
    Screen no.       4001
    So my question is, how to locate the source code which exactly to populate the SO number into VBAK-VBELN by the system automaticallly.
    As assumed that the system is generate this kind of SO autuomatically, and its number range is defined in SPRO.
    I just want to find out the coding part which gengerate the SO number.
    Want to see the source code of that...
    How to find it???
    Thanks.

    Hi Deepak,
    Thanks for the info..
    But i think i am also know that.
    Questions is dont know how to find the KEY statements that exactlly to generate the number...
    Anyway, 2 points to you.

  • No State Code for the vendor

    Hi Everyone
    We have a vendor located in Bermuda and has no state code. This state code is not set-up as required field for vendor master but we need to have this information for our check processing file sent to the bank for payments. Can someone please guide me as to how should I add this missing information to the vendor master so that the file gets processed?
    I appreciate your help.

    Hi
    I checked in the country settings and Bermuda is there. But when I go to insert region and to New entries, I can insert the country BM but there is no region code for Bermuda. The state code HM TX is not working here as it only allows for 2 alphabets. May be we can ask the bank itself what shall be the input here as Region for the check to reach safely. Please advise.
    I appreciate your help.

  • RFC Communication - error CPIC return code 020, SAP return code 665

    Hello,
    I have created RFC destination for connecting SCM system from Solution Manager. Both the systems are Unicode.
    I am getting the following error --
    ERROR                service '?' unknown
    LOCATION             SAP-Gateway on host gva4103 / sapgw00
    COMPONENT            NI (network interface)
    COUNTER              4028
    MODULE
    LINE
    RETURN CODE          -3
    SUBRC                    0
    RELEASE              640
    TIME                 Mon Apr 24 11:28:21 2006
    VERSION              37
    And in SM21, I am getting following description
    Communication error, CPIC return code 020, SAP return code 665
    Following are the things I have checked..
    1. RFC destination user checked, password reset in SM59 and in the target system
    2. checked entries in /etc/services - Entry sapgw03 is present.
    Please let me know what all things I need to check.
    Thanks and Regards,
    Vaibhav

    I solved the problem by myself.
    The problem was with the entry in services file only.
    I was checking the file on Target system, which had the entry. There was no entry in Host system services file. After modifying the file, the connection now works fine.
    Thus for RFC connection, entry of the target system gateway MUST be there in /etc/service of Host system.
    Regards,
    Vaibhav

  • State code for Canadian Province Alberta

    In the initial definition of SAP, the state code for canadian province Alberta is set to 'AL'. The proper code should be 'AB'

    Hello,
    Thank you for the input.
    We will try to reflect this requirement in next version after v2007 which should enter ramp-up soon.
    Regards,
    Peter Dominik
    B1 Solution Management

  • Sevaral Balance Sheet under one Company Code in SAP

    Is it possible to generate profit center wise, branch wise, balance sheets and income statements including other reports under one company code in SAP separatly.

    Yes. It is possible through Financial Statement Version. Further Report Writer or Report Painter helps to create your own Profit Center Reports.
    Regards
    Sampath
    Edited by: PSampath on Nov 25, 2009 11:08 AM
    Edited by: PSampath on Nov 25, 2009 11:08 AM

  • Location 3110 (type code 1003, system TM8500) not found

    Hi ,
    i am sending some data for TransportationOrderSCMRequest interface via XI to TM system
    XML input data having value of  LoadingLoction - Internal ID 3110 and type code 1003,
    Unloading location Internal ID US-CUST-07 type code 1010
    Message status is XI is sucessful but in TM system (SXMB_MONI)  XML message status is transfer to external system  with follwoing error
    <?xml version="1.0" encoding="utf-8" ?>
    - <n0:StandardMessageFault xmlns:n0="http://sap.com/xi/SAPGlobal20/Global">
    - <standard>
      <faultText>Standard Message Fault</faultText>
    - <faultDetail>
      <severity>error</severity>
      <text>Location 3110 (type code 1003, system TM8500) not found</text>
      <id>477(/SCMTMS/TOR)</id>
      </faultDetail>
      </standard>
      </n0:StandardMessageFault>

    Hi Amit,
    To check whether the location is present in TM (And I am referring to TM 8.0), open NWBC (either using t-code NWBC or launching your locally installed version).  Select Master Data - Transportation Network - Define Location.  Enter the values from the error message into the Location and Location Type fields and hit display.  If it is not there, you will need to CIF it over from your ECC system (or you could create it in TM, but recommend CIF).  The t-codes to CIF it over are CFM1 and CFM2. 
    Regards,
    Mike

  • ITD State Code for TDS return

    Hi friends,
    kindly guide me the creation of ITD State Code for TDS return. Is it Local Tax Office or District Tax Office under Section Code of South Korea ? What is the exact creation procedure of ITD State Code as mandatory field in TDS Retrun screen(J1INEFILE - Version ECC 5) .
    Regards,
    Samrat

    Hi,
    This question is still pending and the two tables  J1ISTATECD and J1ISTATECDM which is required to be maintained is not available in SAP. Here version is ECC 5. If there is any SAP note or any alternative suggestions need your suggestions.
    Regards,
    Samrat

  • REG: BALANCE SHEET IN TO MICROSOFT EXCEL , FINANCIAL STATEMENTS WITH IN SAP

    Hi to all !
    i) I want to know the transactions code or FM or Report program for to send the
    MonthEndBalances in to Excel Spread Sheet.
    ii) I want to know the correct configuration of financial statements  with in SAP  for month end balances And to includes the buisness area... How??
    Can any body help for me in this...
    Thanks in Advance..
    Vikram.C
    [email protected]

    thankx

  • Withholding tax maintain ITD state codes

    Hi,
    I need to configure in withholding tax 1). Maintain ITD state codes, 2). Assign ITD State Codes to Regions. Can you tell where i will get these two steps. please give path in ECC6.
    Regards,
    Venkat.

    HI Venkat,
    Please refer the note no 968208 for complete steps.
    Regards
    Madhu M
    http://wiki.sdn.sap.com/wiki/x/UgTpCw  (RUPEE WORD FORMAT)
    http://wiki.sdn.sap.com/wiki/x/8oMEDg  (J1INEMIS )
    http://wiki.sdn.sap.com/wiki/x/2BAMDg  (J1INACKN )
    http://wiki.sdn.sap.com/wiki/x/3xAMDg  (J1INCCREP)
    http://wiki.sdn.sap.com/wiki/x/6xYODg  (J1INREV  )

  • Communication error CPIC return code 019 SAP return  code 728. Delta error

    Hello Experts,
    Would just like to ask if what we suspect is correct. We have running deltas in process chains occurring every early morning. However, upon checking the delta that should have run today, I found that the delta did not push through. I only found this one dump in SM21 that I think is related to the issue:
    MNo.
    R49 Communication error, CPIC return code 019, SAP return code 728
    R5A > Conversation ID: 61442686                                  
    R49 Communication error, CPIC return code 019, SAP return code 728
    R64 > CPI-C function: CMSEND(SAP)                                
    R5A > Conversation ID: 61443687                                  
    R64 > CPI-C function: CMSEND(SAP)                                
    R49 Communication error, CPIC return code 019, SAP return code 728
    R5A > Conversation ID: 61444687                                  
    R64 > CPI-C function: CMSEND(SAP)
    Now we think that the delta did not push through because we are encountering issues with regards to our SAP R/3 system (the source system) and it is currently inaccessible. Did the delta not push through because of the issues and inaccessibility/uber slow processing of our SAP R/3 server? And is the error specified above illustrating this? Any explanation would help. I have already tried looking for similar issues but cannot find anything. Please help. Thanks!

    Hi
    As far I know, The SAP Gateway carries out CPI-C services within the SAP world, which are based on TCP/IP. These services enable SAP Systems and external programs to communicate with one another.
    CPI-C services can be used either in the ABAP program or for the external programs via the interfaces.
    As RFC (remote function call) is based on CPI-C, all RFC connections also pass through the SAP Gateway.
    Errors When Starting Remote Programs Using Remote Shell
    When you use remote shell to start CPIC programs on other hosts, the following conditions apply:
    The (gateway) UNIX ID must be available on the other host
    The gateway host must be entered in the remote host in the file ".rhosts". This file must be located in the HOME directory of the (gateway) UNIX ID.
    The program you want to start must be installed in the HOME directory of the (gateway) UNIX ID on the remote host.
    Read more from help
    http://help.sap.com/saphelp_nw04s/helpdata/en/99/5f8c0bcb7d4280aa862254cffceada/frameset.htm

  • How to find out whether a material code in SAP has any transaction history

    Hi Guys,
    I want to find out whether a material code in SAP has any transaction history or not. In other words, I want a list of all those materials, division-wise, which have not been subjected to any sort of transaction in SAP till date , i.e., lying unused.
    Can any of you in help me out regarding this matter ?
    Regards,
    Anirban

    hhi
    go to se16
    table         MBEW  and field LBKUM for total stock
    from here u can conclude for the zero stock material
    or try this
    S_ALR_87012963 - Material Where-Used List
    regards
    kunal

  • Practical need of G/L Account Code in SAP B1

    Hi All,
    Is there any way to avoid the G/L Account Code in SAP B1?
    Is there any practical need of the G/L Account Codes when the Account Name itself is sufficient and unique in an organization?
    Thanx and Regards

    >> Have u used any time the popular accounting application named "Tally".... one of its popular functionality is "CODE-LESS ACCOUNTING"...
    >> if a user gets a account just by typing a few characters of the beginning of the account name then where's the utility of the G/L account codes?
    >> and to maintain the uniqueness and indexing in database level - the the tables may have several keys hidden to the users.
    If you/ user do not want to create journal entry by using G/L account code:
    Option 1: open form settings of journal entry/ corresponding document and uncheck visible for the G/L acct.
    Option 2: instead of using numbers(digits) for G/L acct code, use descriptive text itself as G/L acct code. This is not recommended practice. But, it is upto your implementation practive/ customer requirement. To do this, you either have to edit existing chart of accounts / create new coa.
    Hope these options will help you to resolve your query.
    Regards
    Satish

  • Transaction code for SAP query reports

    Hi All,
    I am trying to create transaction code for sap query report but couldn't go further.
    1) Created User group in SQ03
    2) Created infoset in SQ03 and assigned that to the user group
    3) Created query in SQ01 using the infoset.
    I executed the report in SQ01 and it is working fine.
    Now I try to create a transaction code in SE93 using the steps mentioned in the following link:
    Assign transaction code to SAP Query (created via SQ01)
    But when try to execute the report using the transaction code, it is giving error message 'User group xxxxxx is not yet created'
    Could any one advice me if I miss something? Or please help me to create this transaction code and transport to production?
    Thanks in advance

    HI,
    based on the thread you've already mentioned:
    In SE93, Create a Paramter Transaction
    -> Transaction = Start_report
    -> In default values, give the below details:
    D_SREPOVARI-REPORTTYPE = AQ
    D_SREPOVARI-EXTDREPORT = Name of the Query
    D_SREPOVARI-REPORT = User Group
    So check if the user group is typed correct in SE93 and check also if the user group exits in the system where you are trying to run the transaction.
    best regards, Christian

  • What is the T.code in SAP R/3 for SAP console applications

    sequence picking in Hall 52. Batch number 0017137168 was assigned to 2 associates. 
    One  associate was assigned to the picks and the other associate confirmed the TO'S
    This is requirement by client
    What is the T.code in SAP R/3 for SAP console applications

    hall 52

Maybe you are looking for