Location of upgrade patch for VMS windows support for IPSv.5

Anybody know where I can download the fcs-IPSMDC-v2.1-w2k-readme.exe?
The site http://www.cisco.com/cgi-bin/tablebuild.pl/mgmt-ctr-ids-app only view the fcs-IPSMDC-v2.1-w2k-readme.pdf file and no *.exe file. I am to upgrade my VMS to support IPS..
Hope someone could help me.

At the top of the download page it states:
NOTE:
For IPS MC 2.1 please proceed to the VMS blind rev page and download the appropriate VMS 2.3 bundle installer (Windows or Solaris) and then apply Service Pack 1 from this page.
The "VMS blind rev" page reference is a link to the correct place on CCO. So follow the link to download the VMS 2.3 components (includes IDSMC 2.1 files inside it).

Similar Messages

  • Not Getting SAPKINBC9A upgrade patch for PI_BASIS

    Hi All,
    I am implementing SPS 12 in my ECC 6.0 System. System is on oracle and linux. My PI_BASIS patch is on 2005_1_700 level and i need to upgrade the same on 2006-1_700. So i cannnot import any of 2006 patch before this component
    I am not getting the support pack SAPKINBC9A on OSS. Am i searching right patch or do i need to implement some other patch for this.
    Thanks in Advance
    Thanks,
    Bhanu Pratap Singh

    I got the patch. And i have implemented the same with SAINT.

  • Upgrade patches for 10.1.2.3 during R12.1.3 Upgrade

    Hi,
    Need clarification about 10.1.2.3 patches during R12.1.1 to R12.1.3 upgrade
    I am following the note Oracle E-Business Suite Release 12.1.3 Readme 1080973.1 and applying the patches "Forms and Reports for Oracle E-Business Suite Release 12 Document 437878.1"
    I am not clear whether I need to apply the Patch 8919489 - R12.TXK.B.Delta.3 before applying any other oneoff patches, this patch seems to be included in R12.1.3 and I am applying these patches of R12.1.13 upgrade
    Thanks

    965417 wrote:
    Thanks Hussein for the confirmation, I have another question regarding the CPU Oct 2012 patch for 10.1.2.3 Oracle Home
    I am following the CPU patch note 1486535.1 and as per this note, we have to follow another note Document 1354842.1 for 10.1.2.3 patches
    Patch Availability for Oracle Fusion Middleware 10.1.2.3
    Is Patch 9593176 only relevant for 10.1.2.3 OH with R12.1.3? Could you pls confirm?
    It is applicable to 10.1.2.3 ORACLE_HOME.
    Thanks,
    Hussein

  • Not able to find the required upgrade patch for 10.2.0.2

    Hi all,
    I am trying to upgrade my database from 10.2.0.1 to 11.2.0.2, for which first i need to upgrade it to 10.2.0.2. But am not able to find the same in the support.oracle.com , please advice.
    Platform details :
    [ora10g@www ~]$ uname -a
    Linux www.benefits.com 2.6.18-164.el5 #1 SMP Thu Sep 3 02:16:47 EDT 2009 i686 i686 i386 GNU/Linux
    Database details :
    SQL> select * from v$version;
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
    PL/SQL Release 10.2.0.1.0 - Production
    CORE 10.2.0.1.0 Production
    TNS for Linux: Version 10.2.0.1.0 - Production
    NLSRTL Version 10.2.0.1.0 - Production
    Thanks and Regards,
    Littlefoot

    The 10.2.0.2 patch is 4547817 - see this MOS Doc
    Quick Reference to Patchset Patch Numbers [ID 753736.1]
    HTH
    Srini

  • Need to upgrade Java Kernal patch and support patch for Solman server 7.0

    Dear all ,
    Tech details  , Win32 bit and Oracle .
    I want to upgrade latest java  kernal patch for Solma 7.0 .
    I have checked the Service.sap.com (https://websmp105.sap-ag.de/support/downloads/Support Packages and patches - Entry by Application Group/Solution manager JAVA Stack)
    Solution Manager JAVA Stack :
    ADOBE DOCUMENT SERVICES 7.00
    BI UDI 7.00
    J2EE ENGINE BASE TABLES 7.00
    JAVA LOG VIEWER 7.00
    JAVA SP MANAGER 7.00
    LIFECYCLE MGMT TOOLS 7.00
    SAP CAF 7.00
    SAP CAF-UM 7.00
    SAP IGS 7.00
    SAP J2EE ENGINE 7.00
    SAP J2EE ENGINE CORE 7.00
    SAP JAVA TECH SERVICES 7.00
    SAP KERNEL 7.00 32-BIT UNICODE
    SAP VIRUS SCAN INTERFACE 7.11
    SAP VIRUS SCAN INTERFACE 7.20 .. ete ...
    what are patches required to Upgarde java  patch and let me know the procedure also . it will be helpful for me .
    Regards
    Kindly suggest

    Dear all ,
    I have checked help.sap.com , its mentioned in Software delivery Unit .
    1,software component archive (SCA),
    2,Java archive (JAR) or SAP archive (SAR).
    Support package stacks:
    A set of different SCAs
    ○     A set of different SCAs that are modified using the NWDI
    ○     The SDM JAR u2013 SDMkit.jar
    ○     The kernel SARs:
    ■      Database Independent: SAPEXE.SAR and other operating system dependent SARs
    ■      Database Dependent: SAPEXEDB.SAR and other database dependent SARs
    ■      The SAP archiving tool u2013 SAPCAR
    ○     The IGS SAR u2013 IGSEXE.SAR
    ○     A configuration XML file, which includes a description of the components that are part of the stack and their respective support package and patch levels.
    I understand the Kernal SARs and I have downlaoed SAPEXE.SAR ,SAPEXEDB.SAR ,IGSEXE.SAR .
    let me know the list of SCA files  , i have to download from service.sap.com . (set of different SCAs that are modified using the NWDI and  The SDM JAR u2013 SDMkit.jar)
    Kindly advise .
    Regards

  • Deskjet 710/720/810/820/1000 Series printers - Patch for 64 bit Vista and Windows 7

    There is an issue with the 64 bit Vista, Windows 7 and Windows 8 or 8.1 drivers that causes the spooler to crash with the following HP Deskjet printers:
    Deskjet 710    
    Deskjet 712 
    Deskjet 720 
    Deskjet 722 
    Deskjet 810 
    Deskjet 812 
    Deskjet 820 
    Deskjet 822 
    Deskjet 1000 
    The attached file contains a patch for this issue for Vista and Windows 7.
    [The patch does not currently work for Windows 8 or 8.1 x64 systems.  There are some efforts to address this, if a solution is developed it will be posted here.  {Edit - I have not made any progress in getting the patch to work in Windows 8 x64.}]  
    First make sure the driver for the printer is installed.  If the driver has not been installed go to Start, Devices and Printers, Add a Printer, Local Printer, choose the proper port (for USB-Parallel converters the port will likely be USB001: or perhaps USB002: ), Next, click Windows Update then choose HP for the manufacturer and select the appropriate printer.   
    Apply the patch as follows: Log into the computer with an administrative account.  Download the patch by clicking on this link or on the paper clip at the end of this post.  Save the patch file to your computer, then unzip it.  Next copy the three DLL files to the following directory:  %windir%\system32\spool\drivers\x64\3   
    Note that %windir% is a system variable that points to the location of the Windows directory. For most systems this will be C:\Windows.  You can click Start, Computer and type %windir%\system32\spool\drivers\x64\3 in the address bar and it will find the right place.
    This can be done from a DOS prompt if DOS is opened with the "run as administrator" command, or from explorer with a copy and paste.  Depending on your UAC settings you may need to provide confirmation.  Also allow the current files to be overwritten if prompted.
    This patch is not required and should not applied to a 32 bit version of Vista or Windows 7.
    Thanks to extraordinary Microsoft engineer Alan Morris for guidance for the patch.
    Update - the following are more detailed installation instructions:
    Download the patch from here. Now click on the file and open it, then extract the patch to some directory that is easy to find. (I use c:\temp. If this directory does not exist you can create it as follows: open the administrative DOS prompt by clicking on Start, All Programs, Accessories, then right click on CMD.EXE and select Run as Administrator. Click in the DOS box then type the following:
    MD c:\temp
    CD \temp
    Now extract the patch files into the c:\temp directory (extract all, chose c:\temp as the destination).
    [Update - Windows security settings may prevent these files from being used, please open Computer, type c:\temp in the address bar and then right click on each of the dll files and select Properties.  If there is a message in Properties indicating the file was downloaded from the internet and may be blocked then unblock the file before proceeding.]
    Next click back in the administrative DOS prompt and type the following: (stuff in green is comments, do not type them...)
    DIR *.dll (this is just to verify the files are there, it should list hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll and perhaps others.)
    Net stop spooler (makes sure the files are not in use.)
    Copy  hpvdb720.dll  C:\windows\system32\spool\drivers\x64\3 (this is for the Deskjet 710/712/720/722)
    Copy  hpvdb820.dll  c:\windows\system32\spool\drivers\x64\3 (this covers the Deskjet 820 and 822)
    Copy  hpwm5db1.dll  c:\windows\system32\spool\drivers\x64\3(this covers the Deskjet 1000)
    Net Start Spooler
    Exit
    [Edit - note that these DLL files will already be in the directory.  You will get a warning asking if it is OK to overwrite the files, say "yes".]
    At this point the patch is installed and ready to print.
    Note that the printers here do not support USB connections, they have only parallel ports. [Edit - if your printer does have a parallel port use it, this will likely be much less problematic than using a USB-Parallel converter.]   If you use a USB-parallel converter make sure it is supported in your operating system.  The following posts are flagged with USB-parallel cables that are reported to work in Windows 7.   A driver is required for the USB-parallel converter in addition to the driver for the printer.  For supported converters this is typically supplied automatically in Windows 7.  Note:  the proper port to select for the USB-Parallel converters is often USB001:.  I have heard of some cases where the port was USB002: or LPT3: as well.  If the port you are using does not succeed (after applying the patch) try changing the port by going to Start, Devices and Printers, right click on your printer and select Printer Properties, then click on the Ports tab.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V
    This question was solved.
    View Solution.
    Attachments:
    DJ_Patch.zip ‏34 KB

    Just want to send a thanks.  Purchased a new HP computer with 64 bit Windows 7 and haven't been able to get my 722c to work. This patch worked like a charm!

  • Patch for cluster upgrade from 10201-10203

    Hi,
    i want to upgrade my cluster from 10.2.0.1 to 10.2.0.3
    can somebody help me in finding the upgrade patch from 10.2.0.1 to 10.2.0.3
    Thanks
    Bala

    patch for which operating system? and why you would like to patch 10203 ?
    if you have metalink account you can download latest patches and documentation for particular patches.
    search metalink knowledge tab for documentation.
    for LINUX os patch download from metalink oracle support select tab patch&upgrade and search the patch i already mentioned.
    for windows and mac os you can directly download from OTN.
    http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
    Oracle Database 10g Release 2 (10.2.0.4) for MAC OS X on Intel x86-64
         Oracle Database 10g Release 2 (10.2.0.4) for Microsoft Windows Vista x64 and Microsoft Windows Server 2008 x64
         Oracle Database 10g Release 2 (10.2.0.3/10.2.0.4) for Microsoft Windows Vista and Windows 2008

  • Best Practices for patch/rollback on Windows?

    All,
    I have been working on BO XI with UNIX for some time now and while I am pretty comfortable with managing it on UNIX, I am not too sure about the "best practices" when it comes to Windows.
    I have a few specific questions:
    1) What is the best way to apply a patch or Service Pack to BO XI R2 on a Windows envt without risking a system corruption?
    - It is relatively easier on UNIX because you don't have to worry about registry entries and you can even perform multiple installations on the same box as long as you use different locations and ports.
    2) What should be the ideal "rollback" strategy in case an upgrade/patch install fails and corrupts the system?
    I am sure I will have some follow up questions, but if someone can get the discussion rolling with these for now, I would really appreciate!
    Is there any documentation available around these topics on the boards some place?
    Cheers,
    Sarang

    This is unofficial but usually if you run into a disabled system as a result of a patch and the removal/rollback does NOT work (in other words you are still down).
    You should have made complete backups of your FRS, CMS DB, and any customizations in your environment.
    Remove the base product and any seperate products that share registry keys (i.e. crystal reports)
    Remove the left over directories (XIR2 this is boinstall\business objects\*)
    Remove the primary registry keys (hkeylocalmachine\software\businessobjects\* & hkeycurrentuser\software\businessobjects\* )
    Remove any legacy keys (i.e. crystal*)
    Remove any patches from the registry (look in control panel and search for the full patch name)
    Then reinstall the product (test)
    add back any customizations
    reinstall either the latest(patch prior to update) or newest patch(if needed)
    and restore the FRS and CMS DB.
    There are a few modifications to these steps and you should leave room to add more (if they improve your odds at success).
    Regards,
    Tim

  • The upgrade patch cannot be installed by the windows installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program

    trying to install an update patch for Citrix xendesktop 7.5 and the error when I click on the msi patch is "the upgrade patch cannot be installed by the windows installer service because the program to be upgraded may be missing, or the upgrade patch
    may update a different version of the program"
    The application was installed 2 days prior and works fine but the patch will not install.
    Any ideas?
    Wendy2014

    Yes let's see if there is any error occurs in installation log.
    Meanwhile from the error message, the possible cause is that a part of the application is missing such as a registry key with app version. In this situation you can first test to reinstall/repair the application though it is still working fine - see if issue
    persists after reinstall the app.
    Meanwhile you could also contact Citrix about this issue. It may be a common issue and Citrix may provide a quick fix for it. 
    If you have any feedback on our support, please send to [email protected]

  • Central Output Server View Manager on Windows 7, need patch for jfPreview.exe

    Where can I obtain the latest version of JfPreView.exe?
    According to the following webpage:
    http://helpx.adobe.com/legacy/kb/central-central-pro-output-server-1.html
    Adobe Central and Central Pro Output Server 5.7, Windows support extended to Windows 7 (32/64 bit) and Windows Server 2008 R2 (64 bit)
    Issue 2 on this page is the problem that I am having:
    Issue 2
    View manager is a client application for Central Pro. When it is installed on Windows 7 (32/64 bit) and Windows Server 2008 (64 bit), it doesn't work properly.
    For Windows 7 and Windows Server 2008R2, IPv6 is installed and enabled by default. On a machine running the Central Preview Agent with IPv4 protocol, the Preview Agent fails to transfer the files. The Preview Agent also reports the following error in the jfserver.log.
    “Fails. Exception:  [1005] Connect to <host> failed: 10060”
    Solution
    A patch for JfPreView.exe.exe is available from Adobe enterprise support to address this issue.
    I need this patch.
    Thank you

    I have loaded KB2937636 to the server2012 wsus/sup but that still did not fix the communication issue.  I have since removed the KB2937636 from the 2012 server, because when the KB2937636 is installed on the sup server once the 7.6.7600.256 computers
    communicate with the server the WUA 7.6.7600.320 gets installed on the clients and then they stop communicating.  Very Frustrating!
    Please any help would be greatly appreciated.  
    Thanks
    ~ZbWinMan
    I have attached my WindowsUpdate.log file.  When I used CMTrace.exe you can clearly see that the computer talks fine at the beginning, then I installed WUA 7.6.7600.320 and All Communication breaks, then I uninstall to get back to 7.6.7600.256 and communication
    works again.
    If I uninstall 7.6.7600.320 then the computer communicates back to the SUP server.
    so you're using SSL? (port 8531)
    weird things might happen when in SSL if hastily configured, causing this weird error, like this for example:
    http://social.technet.microsoft.com/Forums/en-US/5d6ae350-9714-471f-aa67-375e657caa11/windows-update-cant-connect-to-wsus-server-which-happens-to-be-itself-after-switch-to-ssl?forum=winserverwsus
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • OAS 10.1.3.5 on Windows 64 bit, NO CPU patch for April?

    After reading the CPU Advisory for April CPU 2011, it appears that for OAS 10.1.3.5 on Windows 64 bit, that there is NO CPU patch for April? It only shows a patch for Windows 32 bit. They do not mean that the 32 bit patch should also be applied on 64 bit Windows o/s having OAS 10.1.3.5? I just want to make sure I skip this CPU since I have 64 bit o/s.
    I ask because the list of bugs fixed in the README for the 32 bit patch list 32 bit bug fixes , and then 64 bit bug fixes.
    Edited by: user12152237 on May 9, 2011 6:17 PM

    Somu, please check a topic 3 lines below. No, there's not a separate 64-bit installer, but there's a work-around albeit not supported by oracle.

  • Current Patches for Windows (32bit) 9.2.0.8

    We have recently upgraded to Windows 32-bit Oracle 9.2.0.8.  Note 539921  lists the patchset for Windows 32-bit as follows:
    NT_I386 32-bit
    /Oracle/Oracle 32-Bit/Oracle 9.2.0. 32-Bit/Oracle 9.2.0.8. 32-bit/
    NT_I386/Patchset_9208_WINNT.zip
    The patch set is installed with the runInstaller - see README.html
    For more information about installing patch sets, see Note 578683.
    *In addition, use opatch to install patch 12 for 9.2.0.8.
    /Oracle/Oracle 32-Bit/Oracle 9.2.0. 32-Bit/Oracle 9.2.0.8. 32-bit/
    NT_I386/9208_Patch12_WINNT.zip*
    So, after an upgrade to Windows 32-bit 9.2.0.8 you should then immediately apply patch 12?  The problem is reading note 1107601 - CPU Patches October 2007 (Oracle Critical Update Program)
    states the following:
    *The CPU patches are not a patch set, but rather a collection of patches. If
    there is a critical problem, you may have to install a separate fix, which
    conflicts with the CPU patch. In this case, you must uninstall the CPU
    patch.*
    But there is nothing specific for 9.2.0.8 (it implies there are no conflicts for 9.2.0.8):
    For Oracle 9.2.0.7, note the following:
    Unfortunately, the CPU patches for Oracle 9.2.0.7 conflict with patches
    that have already been installed and that are important for an SAP system.
    Therefore, there will be no further release of the patches for Oracle
    9.2.0.7. *We therefore recommend that you upgrade the database to Oracle
    9.2.0.8 and use the CPU patches for Oracle 9.2.0.8 instead.*
    So I'm assuming that after installing patchset 9.2.0.8 for Windows 32-bit I should apply patch 12 (which is CPU October 2007).  There are some patches listed under "Oracle Other" that seem to be generic patches listed under the download section for oracle 9.2.0.8.  Do these patches cause a conflict with patch 12?  I haven't seen a note that says to install them.
    I haven't found a note that says to install anything other than patchset 9.2.0.8 and then patch 12.  Is this right?  I need to find out pretty quick so any help  is appreciated!

    Hi,
    do following as of note 539921
    first apply patch set 9.2.0.8
    /Oracle/Oracle 32-Bit/Oracle 9.2.0. 32-Bit/Oracle 9.2.0.8. 32-bit/
                                            NT_I386/Patchset_9208_WINNT.zip
    than apply cpupatch CPUOct2007 patch 12 for  9.2.0.8  if you found critical problem with CPU it's optional
    use opatch to install patch 12 for 9.2.0.8.
         /Oracle/Oracle 32-Bit/Oracle 9.2.0. 32-Bit/Oracle 9.2.0.8. 32-bit/
                                              NT_I386/9208_Patch12_WINNT.zip
    regards,
    kaushal

  • Hello, I've got a Upgrade-Version of CS5.5 for Windows and changed to a Mac. Now I need the Mac-Version. I tried to install the Download from Adobe. Unfortunatly it didn't accept my password. I guess cause of the Upgrade-Version or the Windows Version I o

    Hello, I've got a Upgrade-Version of CS5.5 for Windows and changed to a Mac. Now I need the Mac-Version. I tried to install the Download from Adobe. Unfortunatly it didn't accept my password. I guess cause of the Upgrade-Version or the Windows Version I own. My System: Mac OS X 10.6.8, 2,8 GHz. Thanks for answers! Greetings, Eva

    Here is a link to the info regarding platform swaps.
    Order product | Platform, language swap
    If you want to try to contact Adobe support to try to get an exception, Start Here  after selecting relevant responses choose "Still need help? Contact us." and the chat contact (or phone) option.

  • SMS2003 unable to deploy secuity patches for windows 8.1

    Hi
    I'm using SMS2003 as a deployment tools. Recently when I try to deploy security patches onto our windows 8.1 PCs and Laptop. From SMS2003 console, it shows deployment successfully. But when I double check the status via PCs and Laptop. None of the patches
    deployed.
    Any idea what's happening.
    Thanks and looking forward for reply.
    Tommy

    I am pretty sure that SMS 2003 does NOT support Windows 8.1. I'd open a case with CSS to verify, but would assume that they'd tell you the same thing.
    Wally Mead

  • I have recently installed windows XP on my bootcamp partition. I am in need for the drivers and what not so that it will run effectivly and the bootcamp assistant canot find the "Windows Support Sofware" Can anyone help me find it manually?

    As the title has stated, I have recently installed Windows XP on my Bootcamp Partition. I am in need of the "Windows Support Software". I am assumeing that is the information that has the Drivers and what not that allow me o properly use my Mac with windows. If anyone can help me locate this inforamtion i would be greatly.... Greatfull.
    P.S. The bootcamp assistant is telling me that the Windows Support Sofware canot be found.

    You both would have had correct awnsers, but i have a Macbook that is close to three years old. And i can't seem to find my Disc. The only reason i haven't ordered a new one in case of emergencies is I plan on upgrading to the new OS in less then a month.
    I think the following may help me (In case anyone els is looking):
    http://support.apple.com/kb/DL830

Maybe you are looking for