Location required for stock within a storage Location

Dear All,
Can we have location concept to identify different stock location within as Storage Location. We are only using MM module and not using WM Module.
Is there a option to maintain location concept to identify stock located at different location in a storage location only in MM Module.
Regards
Vikas Sehra

Hi,
   As you know, the same can be very well mapped using WM. If you are not using WM, you may check the following option.
   If you are using same location for a material within a storage location, you can maintain the location as "storage bin" in the material master - "plant data / stor. 1" view as shown below:
   The same will be shown in MMBE:
   Please note that this storage bin is not actual storage bin, its just a text field for tracking the storage area. It doesnt have any other control.
Regards,
AKPT

Similar Messages

Define Shipping Data for Stock Transfers Between Storage Locations

Hi Guru,
Can i know what is the purpose to maintain Customer, SHipping data for each storage location for the STO between storage location?
Purchasing --> Purchase Order -->
Set up Stock Transport Order-->
Set Up Stock Transfer Between Storage Locations-->
Define Shipping Data for Stock Transfers Between Storage Locations

The Sales org, Distribution channel, Shipping point, Vendor and Customer are maintained to created the delivery.
It is for the transfer of stock between storage locations with any movement type.
Eg: When you do a 311 movement type from Sloc A to Sloc B, then it will create a inbound delivery with the Vendor specified for Sloc A and an outbound delivery from Sloc B with the Customer specified assuming the customer and the vendor as the Plant.
You have to create a internal Vendor and Customer.
Hope it helps.

Help required -for MRP Run at storage location level

Hi ,
we need to have separate MRP fro two storage locations with direct procurement from Storage locations. Right now we have MRP run at Plant level for all the storage locations. we donot want the materials in these two storage locations to be planned at Plant level only with Separate storage locations. Plant level MRP will run for the other storage locations .
I have created separate MRP areas for the storage locations & activated MRP for MRP Areas client level. material masters for the two storage locations have been asigned the MRP areas & maintained the MRP area data in material master .
When we run the MD01, the Planned orders are getting created at both MRP areas plus at the Plant level.we donot want the planned orders creation at Plant MRP area level-only at the storage location level for those two storage locations MRP areas.
Can anybody guide me -how to achieve that ? Did we miss any configuration?
I tried to maintain scope of planning & getting error for parallel processing .
Do i need to maintain parallel procesing with servers ?
Pls need your input on this. Any help will be highly appreciated .
   Thank you in advance.
    Regards,
    Krish.

Hi,
     Go to IMG settings 'Materials Management + Consumption-Based Planning + Planning + Define Storage Location MRP per Plant' Enter your Plant, It will show list of storage location in that Plant, then select 2 in 'MRP Indicator' field for storage location for which u want to plan seperately.
Hope It will clear Your Problem
Regards
Sunil Kumar

MD04 - Display the stock on one storage location particulary.

The transaction MD04 allows seeing the stock of the plant in the first line of the Stock/requirement list.(MD04)
When the plant includes several storage location (e.g MAG1, MAG2, MAG3), we don't have the detail of the quantity one each storage location.
We can use the filter (by using SETTINGS and FILTER ON) that controls the display of the MRP list and the stock/requirements list but this function don't allows seeing only the stock on one storage location particulary. We have to go the tcode MMBE in order to know the stock on each storage location.
Thanks in advance for yours reply.

What is your real problem?
Display the stock storage location-wise is one thing and do MRP without certain storage location(s) (=exclude storage locations from MRP) might be another.
If you only want to display stock of certain storage locations in MD04 but use all you stock for planning, I think there's no reason for it.
If you really want to exclude certain storage locations, then you have to be aware that MRP won't consider that stock (for the plant segment). It will also have impact on ATP (atp won't use that stock too).
So, there's a big difference between exclude a storage location from MRP and to exclude its stock from display.
(You can exclude storage locations from MRP via material master --> MRP4 view --> you have to enter both plant/sloc as organisational level and you will see the suitable tab. It is also possible to control this indicator via config for to be created material masters - you can search and find threads)
You should describe your exact requirement and maybe forum mebers can give you advice.

Unrestricted Stock of issuing Storage Location in reservation

Hi Experts,
We have a requirement, we want that unresticted stock of issuing storage location is printed on reservation (MB23) Thru MB25.
How it is possible.
Kindly help me out, can we use sqvi or something else.
Regards
GR

HI ,
Just Modify this Report with the help of a Abaper and ask him to add an additional column in the report that is the Stock in the unrestricted use for this Material and Plant
combination.
TO achieve the Since we know the Material ,plant and storage location
PIck up the Material Number --RESB-MATNR
the Plant code --RESB-WERKS
the storage LOcation--RESB-LGORT
Go to Table RESB table in this table against the Feilds RSNUM -Reservation NUmber and RSPOS( Reservation item number)
IN some cases the storage location would not be entered by the user ,take care ,he enters the storage location by every user ,so make it mandatory in the screen layout.
After Picking up all the three values ,pass those values in the Table.
MARD line item vise present in the reservation (maintain a loop for the same)
in this table pick up value in the Feild MARD-LABST which is the stock in the unrestricted use.
one thing ,i dont know the exact requiremnet ,but it is to resrict the user from creation of reservation more than the stock ,it can be done by avaliability check.
hope so it helps
Regards
Anjanna.

Stock transfer between storage location in IS -Retail

Hi,
I want to have a Stock transfer order between two storage locations in the plant.
I have activated the "Activate Stock Transfer Between Storage Locations", now i can create a STO and have the "Issuing SLoc" tab.
Having that i get an error message "Not possible to determine shipping data for material XXX" Message no. 06280.
I am trying to have the shipping data in customizing for set stock transfer - "Define Shipping Data for Plants", but my site is not listed due to the use of IS Retail. Is there a way to configure it?
Tnx
Lior

Hello Lior,
in Retail your distribution center is a vendor and a customer, and your store is a customer. Therefore when you create master data for your distribution centre and store, you also create the vendor and customer masters that are required.
By this link of the DC / Store to the customer master the shipping data is derived. I hope this answers your question.
If you have further queries related to this, please do post them.
Regards,
Smitha

Stock Transfer between Storage Location with Order

Dear MM experts,
I am into SAP SD.
Our client wants to Transfer Stock from one Storage Location to another Storage Location of the same Plant. (This can be easily done thru MB1B via Transfer Posting)
But the unique requirement here is they require some kind of Delivery Order or Tansfer Order to be created first & only based on that document user can transfer Stock between Storage Locations of a same Plant. (Similar to Inter-Plant Stock Transfer where we create Stock Transfer PO & then move goods between plants).
Can you please suggest on how to achieve the above scenario.
Thanks,
Jignesh Mehta
Mumbai

hi
Stock Transfer between Storage Locations
u2022 Function of stock transport orders between storage locations is available from ECC 6.0 onwards.
u2022 As a result of which user can input issuing storage location with supplying plant.
u2022 Facility of using different delivery types for different issuing storage locations is available.
u2022 Shipping Point data can also be determined based on the issuing storage location.
refer following
http://sapfunctional.com/MM/StockTransfer/Configure.htm
http://help.sap.com/saphelp_scm41/helpdata/EN/23/29cf20eabe094e957763a46aa5be9d/content.htm
regards
kunal

Stock in 3 storage location..

Hi Friends,
I have 3 storage location where I place stock. As you know that we have only one defualt storage location in Production Order. When system not able to find a stock at that storage location then it will create missing part list msg.
I would like system should pick the stock up automaticaly from another storage location, if stock in not available in default storage location.
I would appriciate, if you could write in steps to do config.
Thnks

Hi,
There may be requirement to withdraw the material from different stocks for goods issues and stock transfers based on some criteria or strategies. To meet this requirement in SAP we have stock determination strategies which determine how and when the material should be withdrawn, and from which storage locations and stocks. We can include the following stocks for the purpose of stock determination: unrestricted-use stock u2022 vendor consignment stock u2022 pipeline material u2022 sales order stock u2022 project stock.
Based on the stock determination strategy you define in configuration, the system makes decisions on material withdrawal depending on the material, plant.
Configuration
SPRO > Materials Management > Inventory management and Physical inventory > Stock determination
Define a stock determination strategy, according to which stocks should be reduced. Each strategy is determined at plant level based on a stock determination group and stock determination rule.
Assign a stock determination group to the material in the material master record.
Regards.

MRP - Create STO for Stockk Transfer between Storage Locations

Hi Everyone,
I have a scenario where MRP run should create Planned Order as well as STO for a VSF Requirement. The reason is our Plant has got 2 Storage Locations. One is the Production Storage Location and the other is Warehouse Storage Location. The Planned Order should be for Production SLoc and STO should for Stock Transfer from Production to Warehouse Storage Location. Your suggestions are much appreciated to resolve this issue.
Thanks,
Jay.

new releaes bring new features........
not all new features can run in old environments.
I know that companies did already Storage location to storage location STOs in 4.6c but they had z-tables to assign customer numbers at storage location level, and they had changed some coding to make it happen.
I am not sure if there is an OSS note that explains the steps and modifications needed......but try to search OSS.

Stock removal from storage location

Dear All,
System showing some stock at various storage location, but whic is physically not in location. Every month balance sheet this stock is shwoing.
Please explain me any how to delete this stock from those storage locations.
Thanks in advance.
Thanks & Regards,
Krish

Hi sap gurus,
there was an production order xxxxx for a machine. so all the materials was booked for that order. then , suddenly the requirements changed. so, they stopped the order n used the whole material for another similar order. any extra material needed 4 the new production order was added to the new one and closed the new order. But, they hav not sent back the materials for the old production order. It has resulted in over valuation of the stock-WIP. i/e., there is a machine worth 15 lakhs on the system virtually. wheras in reality, physically, the machine doen't exist.
Now, the issue is if u want to reverse the work in progress on 31.03.08, will the system let us do (i.e. can we reverse a WIP on a previous date??). if so, pls suggest the complete procedure including Tcode's to use.
Thanks
Pavan

Need to display the Stock Values at storage location level - 0IC_C03

Hi All,
I am developing Stock Movent Report on 0IC_C03 - Material Stocks/Movements.
I have more than one storage location for plant. Stock quantities are calculating at storage location level and Stock Values are calculating at plant level.
I have no issues with quantities. Only problem with Values.
2LIS_03_UM is not picking the starage location, so that the revaualtion values are falling under unassigned nodes. When i set filter on storage location these values were not showing as they are under un assigned nodes (#).
I want to get the Stock Quantity and Stock Values at Storage location level in my report.
I found that soulution for that is Applying SAP Note : How to Realize summarized display of stock values on storage
I have done development as per the document. But when i run the Query it is going to debug mode first and then it saying This program cannot display the webpage
Can any one faced the same situation, Please help me if so.
Thanks in Advance.
Gopal N

Hi Sachein,
I am getting this An exception(CX_RSR_PROPAGATE_X) occured when debugging, and then it leads to next screen saying that:
This program cannot display the webpage
   Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
   What you can try:
     Check your Internet connection. Try visiting another website to make sure you are connected.
     Retype the address.
     Go back to the previous page.
     More information
Please let me know you need any more information.
Thanks in Advance
Gopal N

Exclude stock at a storage location from the Productionn Planning run

Hi,
We have to exclude a storage location from the Production Planning run. We already implemented a user exit in CIF and changed the stock at the storage location to a category Z1 that is not relavant to SAP, but the stock at the location is still being consitered for production planning.
Please suggest a way so that it is excluded from the Production planning
Regards,
Sireesh

Hi Sireesh,
Please try these following options.
1) Filter this storage location in the programme /SAPAPO/RMSDPDEP by writing customised code with an abapper, so that it will drops the storage location stocks not getting planned during deployment
2) Try anyof these user exists
APOBP011 Enhancement for Stock BAPIs (BUS10504)
APOCF011 Inbound Processing: Stock
APOCF027 Customer-Specific Enhancements: Stock
3) Exclude the category from the ATD receipts category group maintained in the master data
Regards
R. Senthil Mareeswaran.

Transfer project/ SO stock between 2 storage locations of same plant

HI,
We have a requirement in which the we have to transfer project/sales order stock between 2 storage locations of the same plant.

Transfer between storage location.
   311 Q - Project Stock
   311 E - Sales Order Stock
Transfer between storage location to own stock
   411 Q - Project stock to own
   411 E - Sales Order to own

How to realize summarized display of stock values on storage location level

Hi all,
we have implemented in Release 3.5 a report to analyze Stock values on storage location level according to the "How to...realize summarized display of stock values on storage location level"- paper. The report is running witout problems.
Now we are going to upgrade our BW-system to release 7.01 in technical environment, we have not upgraded our reports.
Executing the report in release 7.01 we get an error message "Object field I_S_DATA-0TOTALSTCK not found"
The error is coming from line 14 Inc GET_FIELD_POSITION_D in Prog CL_EXM_IM_RSR_OLAP_BADI.
Unfortunately the document "How to... realize summarized display of stock values on storage location level" can no longer be found in SDN.
Is there any new How to - document for this kind of reporting?
Does anybody can give me advice for chances in coding?
Thank you for answers.
Best regards,
Andreas
Edited by: Andreas Förner on Dec 9, 2009 1:52 PM
I have got a solution from support.
The solution is described in note 924320.
Andreas

Hi,
I assume you have also created class "ZCL_IM_Z_MATERIAL_PRICE".
In the implementation of virtual InfoObjects
ZCL_IM_Z_MATERIAL_PRICE we have changed the method INITIALIZE:
OLD:
* fill the global variable
     UNASSIGN <l_global>.
     ASSIGN (l_global_name) TO <l_global>.
     CHECK <l_global> IS ASSIGNED.
     <l_global> = cl_exm_im_rsr_olap_badi=>get_field_position_d(
                                        i_fieldnm = <l_s_sfk>-kyfnm <--
                                        i_s_data = i_s_data ).
   ENDLOOP.
NEW:
* fill the global variable
     UNASSIGN <l_global>.
     ASSIGN (l_global_name) TO <l_global>.
     CHECK <l_global> IS ASSIGNED.
     <l_global> = cl_exm_im_rsr_olap_badi=>get_field_position_d(
                                    i_fieldnm =
<l_s_sfk>-VALUE_RETURNNM
i_s_data = i_s_data ).
   ENDLOOP.
This solved our issue. Please regenerate the query after
implementing the correction.
Hope it solves you issue too.
Best regards,

Stock view by storage location

Dear all,
Can anyone give me T-code for
1.Stock view by storage location
tks

Hi Friend,
You can see this MARD or any table names go to T-code is SE11 or SE16 and click display then there displayed all feild names
if you want to see the perticular feild select feild name and click contents(ctrlshiftf10)
Hope this helps you
Prem

Location required for stock within a storage Location

Similar Messages

Maybe you are looking for