Location sensors not found after 3-7 days work

Good afternoon. I want a permanent job location sensors in my own program. Everything works fine about 3-7 days. But then SensorManager stops include location sensors. I make sure with it when I open any other program from windows Store using location sensor. Location sensors start working after the restart windows or off/on option "Turn on the windows Location platform" in Control Panel. There are other software developers on this tablet with this problem. Is there any way to restart sensor location software programmitically? Or newest drivers?
sorry for my english device:Lenovo thinkpad 10
Hardware ID: Sensors\BcmGNSSLocationSensor_LNV_4752_0000
Driver: 20.18.1477.17Windows: 8.1 Bing 

That driver version (20.18.1477.17) is the latest one listed on the Lenovo Support page:
http://support.lenovo.com/us/en/products/tablets/thinkpad-tablet-series/thinkpad-10
I am currently running the Technical Preview of Windows 10 (build 10166) on a ThinkPad 10, and I see that I have a newer version of the Broadcom 4752 driver: 20.22.405.18. That may be part of Windows 10.
When I was running Windows 8.1 on the ThinkPad 10, I also occasionally saw the same issue: the location sensor would stop working. It might also be caused by the tablet being indoors, and losing contact with GPS satellites. Does the tablet restablish contact if taken outdoors, or is a reboot the only way to get the sensor working again?
 

Similar Messages

  • CUP Issue in workflow - Approver not found after SP13

    Dear All,
    We are facing an issue after upgrade to SP13 in CUP. The request is not getting saved and throwing an error - Approver not Found.
    We uploaded the xml files also of SP13 after upgrade has completed.
    We have not changed the workflow after upgrade and verified all the attributes of Initiator, CAD and approver is already available in CAD - but still we are receiving the error "Approver Not Found"
    The same workflow is working succesfully in Production system which is under SP9.
    Is this an issue with SP13. If any body has encountered please let us know how to resolve.
    Thanks and Best Regards,
    Srihari.K

    Dear Chinmaya,
    Below is the error log
    Log :
    2011-05-09 08:13:17,375 [SAPEngine_Application_Thread[impl:3]_25] ERROR NoApproverFoundException in Save request
    com.virsa.ae.workflow.NoApproverFoundException: No approvers found for req no : 135, for reqPathId, 209, for path, CHNG_ANZ_Z6 and approver determinator : ANZ_LAC
    Also, we tried with simple workflow as well with just 2 attribute logic. Still we received the same error
    Thanks and Best Regards,
    Srihari.K

  • CS6 photoshop not found after downloading and putting in serial number

    CS6 photoshop not found after downloading and putting in valid serial number. Only extended version shows up as available. How do I just download CS6 photoshop only??
    Thanks!

    Nowhere during the installation does it give me the option to select the previous version I purchased! This is a new install on a new computer because my other computer no longer works. There is no option for me to select CS6 PS (NON EXTENDED) on the download from Adobe! When I install it only installs the extended version and tells me my serial number is valid but not for the extended. When you provided the link to the page that has the downloads, all that loads is the extended version. Can you please give me a link to the CS6 (not extended) so I can get back to work? I also was able to get the hard drive out of my computer that no longer works and put it on my new computer I'm trying to install CS6 on and the installer gave me NO OPTIONS to enter my old serial#.
    This is beyond frustrating!!!! I have a computer go out on me, and have to buy a new computer, then when I try to install CS6 PS it will not install. In the meantime I'm trying to keep my small business going to stay in business. I can't call any one from adobe. All I can do is send emails to get this resolved and wait.
    Please please help me!

  • Urgent 2nd request CS6 photoshop not found after downloading and putting in valid serial #

    CS6 photoshop not found after downloading and putting in valid serial number. Only extended version shows up as available. How do I just download CS6 photoshop only?? only the CS6 PS extended version shows up as downloaded.
    I have no idea how this forum works or weather or not this has been posted let alone answered. Can someone from Adobe please help me asap
    Thanks!

    check your duplicate post.  there are two responses.

  • "CJS-30199 The CTC classes were not found after waiting for 900 seconds."

    Here's the snippet of the sapinst_dev.log
    I am trying to install Central Instance on a RedHat Enterprise 4 server (32bit). But stuck at
    this stage.
    TRACE      [iaxxejsexp.cpp:188]
               EJS_Installer::writeTraceToLogBook()
    2007-05-10 20:19:48.093 FSPath(/usr/sap/LN1/DVEBMGS02/j2ee/cluster/server0/apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/com/sap/ctc/util/ConfigMainExt.class).isExisting() done: false
    TRACE      [iaxxejsexp.cpp:188]
               EJS_Installer::writeTraceToLogBook()
    2007-05-10 20:19:48.093 NWJavaInstance._waitForFile() - elapsed time = 910 timeout = 900
    TRACE      [iaxxejsexp.cpp:188]
               EJS_Installer::writeTraceToLogBook()
    NWException thrown: nw.usageTypes.ctcSyncWaitTimeout:
    The CTC classes were not found after waiting for 900 seconds.
    ERROR      2007-05-10 20:19:48
               CJSlibModule::writeError_impl()
    CJS-30199  The CTC classes were not found after waiting for 900 seconds.
    TRACE      [iaxxejsbas.hpp:460]
               EJS_Base::dispatchFunctionCall()
    JS Callback has thrown unknown exception. Rethrowing.
    ERROR      2007-05-10 20:19:48 [iaxxgenimp.cpp:736]
               showDialog()
    FCO-00011  The step configCAF with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|15|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_CAF|ind|ind|ind|ind|1|0|configCAF was executed with status ERROR .
    Your help is much appreciated.
    Thanks and Regards,
    Satish/

    Hello Satish
    Please do following checklist:
    1. Check that the J2EE engine is up and running (e.g. log in with Admin)
    2. Check that the following application is running:
         Visual Admin => Cluster => Server => Services => Deploy
         Select "Application" and look for "sap.com/tclmctcutilbasic_ear
    3. Try to continue installation
    It could be helpful to apply the patch for CTC as per note # 938261
    before restarting.
    and also try to add more memory allocation.
    If issue persists,
    - I'd like to know which installation DVD/CD number being using ?
    - The contents of the LABEL.ASC file.
    - The installation guide reference and title used for this install ?
    - SAPINST version ?
    - Oracle version/patch level ?
    - Operating system version/patch level ?
    See also:
    Note # 851251 - SAP NetWeaver 2004s Installation on UNIX
    Thanks
    Kenny

  • Error message of "404 - page not found" after downloading and installing Firefox 15

    Error message of "404 page not found" after downloading the latest version of Firefox.

    This sometimes is the result of firewall software protecting you from changed applications. Or it might be something else. Can you review this article and see whether it helps: [[Firefox can't load websites but other browsers can]].

  • [SOLVED]Locate command not found

    I have recently installed arch, which seems great so far, (including the base, base-devel and a few other things) and I am having one problem. The locate command does not seem to be working from the command line.
    eg:
    locate atlas
    bash: locate: command not found
    Do I need to install something extra to obtain the locate command? Locate is such a common word I am having a little trouble tracking down the problem with google.
    Last edited by TheStatsMan (2010-06-14 09:28:17)

    > pacman -Ss locate
    core/findutils 4.4.2-2 (base)
    GNU utilities to locate files
    core/mlocate 0.22.4-1
    Faster merging drop-in for slocate
    You want mlocate.

  • Business Rule Error: Fact not found in the rule engine working memory, rule

    I am trying to create a simple decision table with an input(ValidateInput) and a output(ValidateOutput). The input and output schemas have unbounded and nested elements(Parent-child relationship). When I create a condition(specific condition on input) and in the action I am asserting the output object. But when I run using EM it throws the following exception. It would be helpful if somebody could tell me what could be the problem. Please note when I set the output as ValidateInput object then it runs fine. Also it executes fine with ValidateOutput if it doesn't have unbounded(List) element inside it.
    Error Message: {http://xmlns.oracle.com/OracleRules10/OracleRules10_DecisionService_1}operationErroredFault
    Fault ID     rules:211
    Fault Time     Jun 18, 2011 10:45:13 AM
    Non Recoverable Business Fault :
    Fact not found in the rule engine working memory, rule session execution failed. The rule session 270013 failed because an instance of the fact com.example.customer.ValidateResponse could not be found in the working memory of the rule session. This is most likely a rule modeling error. The decision service interaction expects the fact instance to exist in the working memory of the rule session. Check the rule actions in rule designer and make sure that a fact of the expected type is being asserted. If the error persists, contact Oracle Support Services. 270013
    Edited by: reachsky on 18 Jun, 2011 9:57 AM

    It's working now..I had to use Global variable to declare child element of the output variable and use the same during action.

  • Fact not found in the rule engine working memory,rule session executionfail

    Hi
    I'm getting this error on my BRE, the instance Id shows 'faulted' but other consectuctive web services are 'completed' successfully.
    please advise how to fix it.
    Error Message: {http://xmlns.oracle.com/zz_ValidationRules/zz_ValidationRules_DecisionService_1}operationErroredFault
    Fault ID rules:417
    Fault Time Aug 25, 2011 4:59:39 PM
    Non Recoverable Business Fault :
    Fact not found in the rule engine working memory, rule session execution failed. The rule session 130287 failed because an instance of the fact Response could not be found in the working memory of the rule session. This is most likely a rule modeling error. The decision service interaction expects the fact instance to exist in the working memory of the rule session. Check the rule actions in rule designer and make sure that a fact of the expected type is being asserted. If the error persists, contact Oracle Support Services. 130287
    thanks,
    Umesh
    Edited by: user13664410 on Aug 25, 2011 2:19 PM

    When i had this issue i overcame it by opening the Rule Editor->Deleting all existing facts that are imported->Close JDeveloper -> Delete the contents of .rulesdesigner directory in your workspace -> Restart JDeveloper -> Reopen Rule designer and re import all facts.
    Also make sure that all the schemas that are used for Facts are valid ones.

  • IMac:  I type in an IP Address to view my home camera system.  I get a screen : please click icon to load and install webkitplugin:  I hit enter and get: not found.  This IP address works on my iPhone to view my camera system. Help!

    iMac:  I type in an IP Address to view my home camera system.  I get a screen : please click icon to load and install webkitplugin:  I hit enter and get: not found.  This IP address works on my iPhone to view my camera system. Help!

    Search the support website or contact the helpdesk of the equipment supplier. That would be the first place I'd try.

  • HP officejet pro 8600 "not found" after installation on Dell laptop with Windows 7 op syst

    downloaded software from internet and it shows that it's been installed on computer.  Printer is on and shows that it is connected to the network.  Networks match on computer and printer.  Printer not printing from computer but did from my phone.  "printer not found" message comes up during connection process on the instal wizard.  I am using a Linksys wireless broadband router.  I've tried all the troubleshooters and found that there was a driver error, but I don't know how to correct this.  

    Hey @mech3320 ,
    Thank you for taking the time out of your day to ask that question on the HP Forums today!
    I understand that you are having some trouble with the driver download on your AMD chipset but not your Intel one.
    I recommend that you try the web download of the drivers after you uninstall the ones that you tried form the CD.
    Driver Download Page
    Let me know if the web drivers work better for you or not.
    I worked for HP.

  • Get "404 Not Found" after deployment.  How to find out correct URL?

    To the experienced:
    In preparing to deploy my application, I am using JDeveloper 10.1.3.4 to deploy the application to the standalone oc4j server that is included in JDeveloper. After the deployment, I get the "404 Not Found" error when trying to invoke the application in a browser. The deployment looks OK, becasue the log window in JDeveloper showed no error when running deployment from inside JDeveloper. Therefore I guess the question is how to find out the correct URL to invoke the application. The steps I took in doing the deployment are as follows.
    I first installed the standalone oc4j by running the <jdev_home>\jdev\bin\start_oc4j .bat file. The installation is OK because I deployed the SRTutorial applcation and invoked it in a browser successfully.
    The WAR file was created by right-clicking the ViewController project and select to create a WAR file. To the application's Context Root its own name, I typed "ZB" in the box for the context root.
    Then in ViewController -> Resources, right_click the deployment file (ZBOV.deploy) and chose "Deploy to" the local_standalone_oc4j. The messages in JDeveloper's log window for the deployment are all clean without errors.
    I then used this url to invoke the deployed application in a browser:
    http://localhost:8888/ZB/faces/staff/login.jspx
    But I got an "404 Not Found" error. Right away I tried invoking the SRTutorial application, and it runs fine.
    login.jspx is one of the pages for the appllication. In the application navigator, it is located with other files in the ViewController/Web Content/staff folder, therefore I used /staff/login.jspx after ZB/faces.
    What could be wrong? If the deployment is actually successful, how to find out the correct url to invoke the application?
    Many thanks for your help!
    Newman

    Hi, Arun,
    Thank you for the suggestion. I tried it but got the same error.
    I tried it by first undeploying the application using the enterprise manager page (which is also part of the oc4j included in JDeveloper). I select the application and clicked the undeploy link, confirmed that I wanted to remove it. And it was removed.
    Then in JDeveloper, I right-clicked the ViewController, and in the properties of the probject selected "J2EE Application" and then selected "Use Custom Settings", then in the "J2EE Web Context Root" box I entered "ZB". Created the deployment profile again, overwriting the existing one, and then right-clicked the ZB.deploy node to deploy to the standalone oc4j on the localhost. And I used the url:
    http://localhost:8888/ZB/faces/staff/login.jspx
    And I got the same "404 Not Found" error.
    There was no error at the time of deployment using the ZB.deploy profile. On the enterprise manager page, the path of the deployed application is given as /C:/jdev10134/j2ee/home/applications/ZB.ear, and the folder of the deployed application is there. Question is: if the deployment is actually OK, can the correct URL be found in some file somewhere in the folder?
    All ideas and suggestions are very much appreciated!
    Newman

  • (OEL 4.7) -bash: sqlplus: command not found after install of 10g R2

    Hi all
    I'm new to Linux and I would like your help and directions on a few things:
    After 2 days of battle with RPM's (i386 vs x86_64) i was finally able to install 10g R2 on OEL 4.7 x86_64 system without any errors.
    please check if all these settings are correct and help me how to start sqlplus? or create a database with dbca
    I followed all the directions in Doc ID: 339510.1.
    During installation i choose this path as the ORACLE_HOME
    /u01/app/oracle/product/10.2.0/
    I did not however installed the default database.
    I then ran the two scripts at the end of the installation as root.
    Here are my settings:
    oracle bash_profile:
    # .bash_profile
    # Get the aliases and functions
    if [ -f ~/.bashrc ]; then
    . ~/.bashrc
    fi
    # User specific environment and startup programs
    PATH=$PATH:$HOME/bin
    export PATH
    unset USERNAME
    :q
    ORACLE_BASE=/u01/app/oracle
    export ORACLE_BASE
    ORACLE_HOME=/product/10.2.0/db_1;
    export ORACLE_HOME
    export PATH=$ORACLE_HOME/bin:$PATH
    here is my oracle env result
    [oracle@nycoralp01 /]$ env | grep -i ORACLE
    OLDPWD=/home/oracle/oraInventory
    USER=oracle
    ORACLE_BASE=/u01/app/oracle
    MAIL=/var/spool/mail/oracle
    PATH=/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/oracle/bin
    HOME=/home/oracle
    LOGNAME=oracle
    ORACLE_HOME=/product/10.2.0/db_1
    here is my echo $ORACLE_HOME result:
    [oracle@nycoralp01 /]$ echo $ORACLE_HOME
    /product/10.2.0/db_1
    Can someone please tell me what did i miss or did not set?
    When i try to run sqlplus i get this error
    [oracle@nycoralp01 /]$ sqlplus
    -bash: sqlplus: command not found
    Any help appreciated

    I change it in my bash_profile
    $ vi ~oracle/.bash_profile
    # .bash_profile
    # Get the aliases and functions
    if [ -f ~/.bashrc ]; then
    . ~/.bashrc
    fi
    # User specific environment and startup programs
    PATH=$PATH:$HOME/bin
    export PATH
    unset USERNAME
    :q
    ORACLE_BASE=/u01/app/oracle
    export ORACLE_BASE
    ORACLE_HOME=$ORACLE_BASE/product/10.2.0/db_1;
    export ORACLE_HOME
    export PATH=$ORACLE_HOME/bin:$PATH
    and i'm still getting the same error
    -bash: sqlplus: command not found
    Is there anything else i'm missing? do i have to restart anything?

  • "Hard Disk - (3F0) BootDevice not found" after removing Windows

    Hi.
    I own a ProBook 4530s that came with preinstalled Windows 7 Home Premium. I'm a long-time Linux user, so the first step I took after buying it was shrinking the OS partition and installing Arch Linux on the newly created free space. I have used the notebook in this setup for something like a year now, but since I rarely even boot to Windows, I decided to gain some free space by deleting them entirely. Using cfdisk, I deleted their partitions.
    After a short time (about a day), I had the machine powered down, and I found some old labelless CD I wanted to inspect. I started the computed and inserted it into the drive. It was apparent it was a Windows XP installation CD, so I turned the computer off (before it finished the phase of loading drivers).
    (It's likely that the previous paragraph is unrelated to the error message, because the installation shouldn't even touch the disk at that phase. I also don't reboot often, so I'm not sure whether did the computer boot between deleting the partition and booting the Windows XP CD.)
    The next time I tried to boot the PC, I was greeted with "Hard Disk - (3F0) BootDevice not found". All HP diagnostics were OK, and when I instructed the GRUB on an Ubuntu live CD to boot into my hard drive, it booted normally.
    I admit the BIOS might be somehow confused by the partition table I have, as it begins with a lot of free space and has no NTFS partitions, but I believe BIOSes shouldn't be dependent on the OS I run. So, I have a few questions:
    Does the HP BIOS try to detect Windows, and does it do anything differently if it doesn't find Windows on the hard drive? I googled around, and didn't find anyone with experiences running just Linux on my notebook (just dual-booting...).
    If it does, is there some way I could convince it to boot into the hard drive even through it doesn't have Windows on it?
    Thanks.
    This question was solved.
    View Solution.

    I see the same error but my situation still allows me to boot up but only with the secondary HDD in the DVD writer bay. For more details, please see an existing thread on http://h30434.www3.hp.com/t5/Notebook-Hardware/Hard-Disk-3F0/m-p/1670523#M76013.
    I am suspecting that it has something to do with BIOS not reading the MBR or something.
    Have you sorted your issue on this yet?
    Cheers

  • Network card not found after new installation [SOLVED]

    I broke my filesystem on my Asus UL80V series laptop in trying to solve problems related to the latest glibc update, so decided to do a clean re-install. I had an installation disk at hand: 2009.08 with kernel 2.6.30.4-1 (which is supposed to have the module for my ath9k network device). However after a successful installation (including all the files from base-dev), my network device is not recognised:
    dhcpcd: eth0: interface not found or invalid
    although network connectivity (wired and wireless) worked perfectly before the installation attempt.
    This happened yesterday (17th) and I have been scouring the web since trying to find out what the cause of this problem is, without luck.
    I also burned a new installation CD with the latest stable version, but no luck there, either! Got a message at the beginning informing me that the install requires 64 Mb memory, although my laptop has 4 Gb.
    I should say, the device is there and working:
    lspci | grep Net
    gives
    02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
    I also did
    modprobe ath9k
    just to make sure. No luck.
    Any help will be appreciated.
    thanks
    thea
    Last edited by thea (2012-07-23 23:59:16)

    Argh, ip may not be around in the 2009 image really ;-) .. Use "ifconfig" instead..
    But: I meanwhile cross-checked your ath9k: http://wireless.kernel.org/en/users/Dri … h9k_driver
    and it does not sound encouraging for the kernel you have there.
    The image is far too old anyway, if you ask me (would be a darn hazzle to get that uptodate I am sure). Pity you get that memory error with the 2011 one. Maybe check forums on that. Sounds very strange, I am not aware of any post I read.
    If you can burn another CD, you can try the recent ISOs as well: http://releng.archlinux.org/isos/
    Beware that the ones from July dont have the AIF setup anymore.

Maybe you are looking for