Location services icon blinks on even when no notifications are being used also recently used services should have a purple arrow but mine is grey

My location indicator icon on the tool bar seems to blink on randomly even when I have not used any services. Also when I do use a service I am not seeng the purple icon in the pricacy-location services appearing next to the recently used icon it seems to stay grey. Any ideas? Is this a bug perhaps?

I experience the same thing today. After hanging up from a regular phone call, I noticed the location services icon showing on the status screen of my phone for a split second. I always have my location services off. I checked my privacy settings and there was no record of any program using the location services. What is going on Apple? I was in a familar and secure WiFi network. Is location services secretly turning on thru wifi?

Similar Messages

Thr screensaver turns off the music even when I Set it as yes, screensaver with music. I have restore the appletv, but it still happens.

My screensaver is turning off the music, even if i choose yes, screensaver with music. How to fix that? I have already restored the appletv.

Try manually connecting the device to your PC in Disk Mode and then restoring it iTunes.
From http://support.apple.com/kb/HT1363
Putting iPod devices with a Click Wheel into Disk Mode
If necessary, verify that your iPod has a Click Wheel.
Before placing the iPod into Disk Mode, verify that it is charged.
Toggle the Hold switch on and off (set it to Hold, then turn it off again.)
Press and hold the Menu and Select buttons for at least six seconds, until the Apple logo appears.
When the Apple logo appears, release the Menu and Select buttons and immediately press and hold the Select and the Play/Pause buttons until the Disk Mode screen appears.
Connect the iPod to your computer; the screen on the iPod will should say "Do not disconnect".
If you are having difficulty putting your iPod into Disk Mode, set it on a flat surface. Make sure that the finger pressing the Select button is not touching the Click Wheel. Also make sure that you are pressing the Play/Pause button toward the outside of the Click Wheel and not near the center. If you are still unable to put your iPod into Disk Mode, use one finger from one hand to press the Select button, and one finger from the other hand to press the Play/Pause button.
B-rock

Can reject sales order items even when partial deliveries are being made

Hi,
It shouldnt be able to reject a line item in sales order, if some deliverires are created, or invoiced for those items.
Can any one advice as to how i can stop items being rejected once deliveries/invoices being created for tht SO.
Thanks
Keshini

Standard functionality does allow it, but you may use a user exit in MV45AFZZ to fulfill your custom requirements.

HT201210 My mini is freezed only Itunes icon and the USB icon is showing even when i restart, pls advise

My mini is freezed only Itunes icon and the USB icon is showing even when i restart, pls advise

The USB cable and iTunes logo is telling you to connect your iPad to the computer you normally sync with. Something has gone wrong and you need to restore your iPad.

All of a sudden my new iphone will not hold a charge even when it is not being used and I can't figure out why???

my battery drains even when iphone is not being used. It is a relatively new phone and this battery draining just started and I can't figure out why????

Yes, thank you. My apologies, I was typing one handed and did not add that.
Anyway, I have tried deleting the cache, deleting my pics and then re-syncing, etc. and nothing is working This is very frustrating, as I had no problems up until about 2 weeks ago, and now all of a sudden, I have this issue......UGH!

When instant streaming Netflix on my Macbook Pro, the sound is very very low even when sound controls are set at highest level.

When instant streaming Netflix on my Macbook Pro, the sound is very very low even when sound controls are set at highest level. I do not have this problem when listening to TV or watching movies streamed from DishNetwork. I contacted Netflix and they had me install a newer version of their software Silverlight... this did nothing to resolve the issue. They were not familiar with the issue.

Well if your on 10.6.2, you need to software update to 10.6.8
Perhaps you need to adjust the Silverlight (Microsoft DRM video plug-in) sound level itself too
Run a check here to see if your current on your Silverlight (works for all browsers)
https://www.mozilla.org/en-US/plugincheck/
Use another browser like Firefox and see if it continues.
Try another video file. They all have their own sound levels too.

IPhone5 with ios 6.1.2 uses cellular data when connected to wifi. Every hour to the minute even when no apps are running, iCloud is off, Ads are off, Diagnostics are off. Running on AT&T cellular network.

I have 3 iPhone5's with ios 6.1.2 that user cellular data when connected to wifi. Every hour to the minute even when no apps are running, iCloud is off, Ads are off, Diagnostics are off. Running on AT&T cellular network.
Date Time To/From
Type
Direction
Msg/KB
03/14
01:30 PM
phone
Internet/MEdia Net
Sent
78 KB
03/14
01:02 PM
phone
Internet/MEdia Net
Sent
4397 KB
03/14
12:48 PM
phone
Internet/MEdia Net
Sent
19520 KB
03/14
12:30 PM
phone
Internet/MEdia Net
Sent
19503 KB
03/14
11:30 AM
phone
Internet/MEdia Net
Sent
2427 KB
03/14
10:30 AM
phone
Internet/MEdia Net
Sent
359 KB
03/14
09:30 AM
phone
Internet/MEdia Net
Sent
1396 KB
03/14
09:25 AM
phone
Internet/MEdia Net
Sent
1 KB
03/14
08:25 AM
phone
Internet/MEdia Net
Sent
30 KB
03/14
07:25 AM
phone
Internet/MEdia Net
Sent
16 KB
03/14
06:25 AM
phone
Internet/MEdia Net
Sent
45 KB
03/14
05:25 AM
phone
Internet/MEdia Net
Sent
15 KB
03/14
04:25 AM
phone
Internet/MEdia Net
Sent
14 KB
03/14
03:25 AM
phone
Internet/MEdia Net
Sent
21 KB
03/14
02:25 AM
phone
Internet/MEdia Net
Sent
23 KB
03/14
01:25 AM
phone
Internet/MEdia Net
Sent
16 KB
03/14
12:25 AM
phone
Internet/MEdia Net
Sent
23 KB

Hello All Who Read This!
I just bought an iPhone 5 on the 21st of March. I ate through 850 MB's in 12 days. I read up on the issue of data consumption looking for tips to conserve data. I did not know there was a problem.
This morning I found out that I was leaking data very little, but daily it accumulates. I am in Barcelona, Spain. I do not have a contract, I am on a prepaid Yoigo carrier.
I happened upon an article/blog by Robert Parks at snnyc.com "problems persist in ios 6.1.2.".
Although his situation did not relate to me, I tried a few tests on my own to see if I could stop the data leak without turning off my celular data and possibly push notifications, I think I found a solution that might help someone:
In ios 6.1.3 goto Settings/Mail, Contacts,Calenders and scroll down to Calendars and turn off " New Invitation Alerts" and also turn off "Shared Calendar Alerts".
My Cellular Network Data seems to be behaving. I only see a change in MB used when I open an ap that uses data.
All The Best

Nano plays music out loud even when ear buds are plugged in?

Nano plays music out loud even when ear buds are plugged in? its like the external speaker is always on, i cannot figure out how to turn it off....HELP SOMEONE

You don't have to shout - typing in caps.
The earphones must be pushed very hard into the iPod. So hard, that the white part of the plug must touch the iPod in order for the external speakers to turn off. You will hear a click.
 If you do a forum search, you will find this same solution. If it does not work, you will need to take your iPod to an apple store or call the Apple iPod tech support if still under warranty or you have Apple Care.

Light on iphone4 flash will not turn off even when phone is powered down, now it is overheated and says not usable till cooled, but it won't cool. I'm afraid it will start a fire.

light on iphone4 flash will not turn off even when phone is powered down, now it is overheated and says not usable till cooled, but it won't cool. I'm afraid it will start a fire. Aside from breaking it, putting in in a metal pail in the yard, or putting it in a bucket of water, what can be done to keep it from setting a fire. It is so hot it burns my skin if i touch it, so bright, it hurts to look at, so hot there is now a warning that it is not usable till it cools down, but there is no way to cool it down.

more info, this happened after update to 7.0.2, and also wifi will no longer turn on since update. I took it in to apple store, it had one month left on warrenty, and they said that it would have had to get wet for this to happen. I thought that maybe it got wet through my jeans pocket in the rain or something so I didn't pursue it. Now of course, it is out of warranty by a month.

File corruption on SDCard when multiple files are being written from WinCE 6.0R3

We currently have file corruption problems which we have been able to reproduce on our system which uses WinCE 6.0R3. We have an SDCard in our system which is mounted as the root FS. When multiple files are being written to the file system we occasionally
see file corruption with data destined from one file, ending up in another file, or in another location in the same file. We have already written test SW that we have been able to use to reproduce the problem, and have worked with the SDCard vendor to
check that the memory controller on the card is not the source of the problems.
We know that the data we send to WriteFile() is correct, and that the data which eventually gets sent through the SDCard driver to the SD card is already corrupted.
We believe that the problem is somewhere in the microsoft private sources between the high level filesystem API calls and the low level device calls that get the data onto the HW.
We have confirmed that the cards that get corrupted are all good and this is not a case ofpoor quality flash memory in the cards. The same cards that fail under WinCE 6.0R3 never fail under the same types of testing on Windows, Mac OX, or linux. We
can hammer the cards with single files writes over and over, but as soon as multiple threads are writing multiple files it is only a matter of time before a corruption occurs.
One of the big problems is that we are using the sqlcompact DB for storing some data and this DB uses a cache which get's flushed on it's own schedule. Often the DB gets corrupted because other files are being written when the DB decides to flush.
So we can reproduce the error (with enough time), and we know that data into the windows CE stack of code is good, but it comes out to the SDcard driver corrupted. We have tried to minimize writes to the file system, but so far we have not found a
way to make sure only one file can be written at once. Is there a setting or an API call that we can make to force the OS into only allowing one file write at a time, or a way of seeing how the multiple files are managed in the private sources?
Thanks
Peter

All QFE's have been applied we are building the image so we have some control.
I have build an image which used the debug DLL's of the FATFS and I have enabled all of the DebugZones. The problem is still happening. From the timings in the debug logs and the timestamps in the data which corrupts the test file I have been able
to see that the file is corrupted AFTER the write is complete. Or at least that's how it seems.
We finished writing the file and closed the handle. Then more data is written to other files. When we get around to verifying the file it now contains data from the files that were subsequently written.
What I think I need to do is figure out in detail how the two files were "laid down" onto the SDCard. If the system used the same cluster to write the 2 files then that would explain the issue.

I just upgraded to iPhoto '11. When it was finished many pictures do not appear. I have a black box but the information for the picture is still there. Some are raw and some are jpeg. Also lost all albums. Can anyone offer assistance?

I just upgraded to iPhoto '11. When it was finished many pictures do not appear. I have a black box but the information for the picture is still there. Some are raw and some are jpeg. Also lost all albums. Can anyone offer assistance? Using iOS 10.7.5

Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Have a iPhone 4 and I was trying to play my music out loud and when I tried it wouldent play. It said i still have headphones in it, but I don't. When I do put headphones in, the music does play!

I have a iPhone 4 and I was trying to play my music out loud and when I tried it wouldent play. It said i still have headphones in it, but I don't. When I do put headphones in, the music does play! I need help!

Try a hard reset:
Hold the home button and the sleep/wake button down at the same time. The phone will turn off and then the apple logo will appear. As soon as you see the apple logo release both buttons.
If the issue remains check the headphone jack to see if the water indicator has been set off. if it has you will see a red/orange spot inside your headphone jack and would mean you have water damage and would need the phone to be replaced.
Last option would be to back up your phone and restore to factory settings to determine a software or hardware issue.

When I open a new tab, there are 9 tiles that I am assuming should have 9 sites you've either been to or would like to make as favorites. I can't figure out how

when I open a new tab, there are 9 tiles that I am assuming should have 9 sites you've either been to or would like to make as favorites. I can't figure out how to drag a favorite into one of the tiles.

I've done this before. When I drag a bookmark to a new tab , all it does is opens up that book mark on that page , it doesn't place and save
it in the tile

My cursor keeps blinking every 30 secs or so even when no app is being used. How can I stop this?

Hi there!
I hope you can help me with this. Just today, my cursor keeps on blinking (or loading?) every 30 seconds or so for no reason at all. At first I thought it was the auto-save for my MS Word, but even after I closed it, it's still blinking even when I'm not
using any apps. Tried killing spooler in task manager as I saw in other forums but it's still blinking.
Would very much appreciate your help.
I'm using a Toshiba Satellite L40D-A, Windows 8.
Thanks in advance!

Hey Readie85,
Thanks for the question. This alert usually appears if there is debris in your dock connector. Check to make sure it is free of any debris:
“This cable or accessory is not certified and may not work reliably with this iPhone."
"This accessory is not supported by this device."
If either of these alerts appear and nothing is connected to the dock connector, make sure that the dock connector is free of debris.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/ht1476
Thanks,
Matt M.

Lenono Vibe X2 Battery Die even when phone is not being used

HI,
I baught Lenovo Vibe X2 couple of months back, and I continuously noticed that the battery of my phone die within 4-5 hours. Even i am not using my phone at all it doesn't work for more then 7-8 hours.
I am seriously not able to understand what to do with this mobile. Having a new mobile in my hand with charger connected everywhere i go. This is not acceptable from such a big brand.
I would like to add one more thing, after use of 10-15 minute it heats up like a buring stove.
I upgraded it with the updates but nothing worked at all, and now i am in serious trouble as my job is to travel a lot.
Please suggest me what to do.
Thanks,
Santosh
XXXXXXXXX
Moderator note: Personal information removed for member's protection.

This is not usualy for the X2. The X2 does not really heat up and the battery should last for at least a day with normal usage. I don't have the X2 but it should have about 4 to 5 hours of onscreen, that is when you have the screen on for 4 to 5 hours that is how long it should last. With moderate ussage you should last a day.
It could be either that you installed some apps that are killing your battery or you get some third party viruses or malware. If this would be the case you could reset the phone to factory settings and get everything that should not be there deleted and wiped out. I would not even do a back-up to make sure all is deleted fully and truly.
Second, your phone could have some hardware issue and for that you are best to cotact the service center and they might repair or exchange your unit. Finally, if you go the Settings > Power management > Power consumption details --- you will see what app or hadware is consuming your batter the most, and based on that you can act.

Location services icon blinks on even when no notifications are being used also recently used services should have a purple arrow but mine is grey

Similar Messages

Maybe you are looking for