Location to Track ID

Is there a way using apple script to know the Track ID if you know the location of the track on the hard disk.

I don't know about how to find the track ID with a script, but if what you're trying to do is match your files to tracks in iTunes highlight each track in iTunes and hit Command-R and the corresponding file will be shown in the finder.
Lonnie

Similar Messages

HT204053 I have two iphones? How do I locate or track second line?

I have two i phones? how do i locate or track second phone?

Have a look here...
setting-up-multiple-ios-devices-for-messages-and-facetime.html

Itunes cannot locate the track?

I tried to move an album to my iphone and it said the tracks could not be located?
What's up with that?
this only happens with the CD's I imported to itunes. yeah, all 330 of them !
Tracks I've purchased on itunes transfer fine.
If I delete the album and import again....then I can transfer....but ...really .?

iTunes can burn a CD and write out the disc with a feature called CD Text, which is probably what your car's CD player is reading. However if you put the same CD back into iTunes to read the data it only picks up the audio tracks themselves. Unless it can match the tracks to a CDDB entry it won't be able to fill in the details. I haven't heard of any software that can rip & rename such tracks, but then I can't say I've actively looked.
tt2

Location appliance tracking limit??

Hello,
One question that I haven't found an answer for yet!
When the location appliance reaches the maximum number of tracking devices of 2500 what happens next???
It stops collecting information for new devices?
It deletes information for older devices hence allowing tracking of new devices?
Stops working all together??
It ??????
Thanks for any clarification.
Jorge.

Hi Jorge,
I am not sure if this would answer your query, but this is what I managed to find -
The location appliance can track up to 2,500 elements. You can track the following elements: client stations, active asset tags and rogue clients and access points.Updates on the locations of elements being tracked are provided to the location server from the Cisco wireless LAN controller.
Only those elements designated for tracking by the controller are viewable in Cisco WCS maps, queries and reports. No events and alarms are collected for non-tracked elements and they are not used in calculating the 2,500 element limit.
You can modify the following tracking parameters using Cisco WCS:
â¢Enable and disable which element locations (client stations, active asset tags; and rogue clients and access points) you actively track
â¢Set limits on how many of a specific element you want to track
You can set limits on how many of a specific element you wish to track. For example, given a limit of 2,500 trackable units, you could set a limit to track only 1,500 client stations. Once the tracking limit is met, the number of elements not being tracked is summarized on the Tracking Parameters page.
â¢Disable tracking and reporting of ad hoc rogue clients and access points
http://www.cisco.com/en/US/docs/wireless/location/2700/4.0/configuration/guide/lacg_ch4.html#wp998931
A major alert appears on the Advanced Parameter window if the tracked elements limit of 2,500 for the location server is reached.
http://www.cisco.com/en/US/docs/wireless/location/2700/4.0/configuration/guide/lacg_ch8.html#wp999251
In addition to this I found a resolved issue in release 3.0.37.0 -
CSCse76683-Previous to this release, once the 2,500 limit of supported elements for the location appliance was met, no new location calculations were reported for any element beyond the 2,500 limit. Location calculations were reported once an element within the recognized 2,500 elements aged out. This condition occurred even when polling was turned "off."
Symptom:
The location calculation is not happenning for some of the elements. There are ERROR events saying 'Location limit hit, can not add any more location elements'. Even if the polling is turned OFF for the type of element that are too many, the location is not calculated for new elements.
-> Sushil

2700 location appliance tracked elements

I have a 2700 series location appliance running version 2.1.42.0, I know it's an older version but my controllers and WCS need upgraded as well. Putting that aside, I recevied an error in WCS that I have reached the max of 2500 tracked elements. Does anyone know how to reset the tracked elements back to 0 so the device can start over again? I'm not sure how it got to that limit as I only have about 150 Ap's and roughtly 1500 clients. thanks.

at this point, I'm thinking clearing the whole db may be the way to go and let it start over. Can the db be cleared without clearing the entire appliance config?

How to locate or track stolen ipad using serial number..?

the find my iphone is not turned on.. is there any ways to track or locate it?

If you did not turn on the find my iPhone feature, then there is nothing at all to be done ( other than change your passwords).
It is just like a lost wallet or car keys.

Location to track equipment current position

Hi, My client has machines, which they issue to contractor on project location. Now at the time of any breakdown of equipment, production person only know the exact location. So at time of notification, user should be able to put the location of equipment, where it is right now. So is there any customisation or development to update location without changing the location in equipment master.please guide me.any workaround.

Hi,
As you asked for work around & form your question what I could make out is that,
you shift your plant equipment to vendors area but you dont want to use dismenate & installation activity as Std.
Where as at the same time you want to trace the equipment location.
You can check with other data tab on for this type of equipment cat at SPRO.
Whenever you move quipment to vendors premises you can use other tab customer or vendor code field.
Put here the values during each change this will get recorded in change history.
This is a work around. I am not sure upto what extenet this will full fill your requirment.
Ramesh

Any way to locate or track a powered off Iphone 4

Hiii Everyone My Name is Adeel from Dubai , UAE.the Problem i am facing is that my Wife has misplaced her Iphone 4 and its Powered Off.Is there any way to locate the iphone.As me n her tried alot to find it but cudnt do it.
Looking for your Cooperation..
Regards
Adeel

Other than physically looking for it, sorry, no.

Locating audio tracks when Importing OMF

I have just imported an OMF from another Logic session. All my audio tracks are in the media folder and all the audio regions are in the session page in their correct places.
But the audio isn't synced up to the regions, is there any way of not doing it manually as I have over 2000 files.
Or is there something I can do when importing the OMF's to make sure this doesn't happen.
I just started a new session straight from the OMF when this happened.
I am now importing the OMF from an open session.
Any advice greatly appreciated

This has been posted by others in the past, there seems to be changes in FCP 5 and/or QuickTime that make its media not fully-readable by earlier revs of FCP.
I would recapture in FCP 3.

Cursor location & action tracking data

I've asked this same question in another forum, but I am still unable to locate the answer that I am looking for. Basically I am wanting to extract the cursor location information that Adobe Connect uses to properly display a presenter's mouse movements during the playback of a recorded session. If I download a local ZIP file of a recording and examine all of the XML files, none of them seem to relate to the mouse's location over time. I've even looked at all of the metadata that is embedded into each of the FLV files. No such luck there either.
I know this data is being saved because the cursor actions are overlaid/replayed during a server-side playback of a recording, but it does not get included in the XML files of the ZIP when downloading a local copy. Does anyone have a thought as to where I can pull this data? I have nearly 50 recording sessions that I need to access this data for.
Thanks for any help!
-Bill

Jaydeep-
Thanks for the clarification on the types of cursor data. In my particular instance, I am interested in the first method that you described.
With the work that we do for our recordings, we have already worked out a process for extracting the necessary mouse data from the XML files based on the second method that you described.
During my testing, I recorded a very simple screen share where I move the cursor to each corner of my screen and clicked in each corner, and then moved to the center and clicked. I was hoping to be able to use this recording to decifer the mouse actions, in particular the mouse clicks, and generate a text file that had a time stamp for each click. If that data is somehow stored within the screenshare_x_x.flv, I guess I am asking for a method to extract that data from the FLV. Any thoughts on how I might go about that?
I appreciate any further help you might be able to provide.
The URL for the demo recording that I set up is: http://ibmstg.adobeconnect.com/p57wu7mx0xb/
Thanks again!
-Bill

I have copied over my music file to a new computer and the music shows on itunes but wont play. When I track where the song is located it is reading the wrong information. How do I change this as Edit Preferences has the right location

I have copied over my music files to a new computer and the music shows on itunes but wont play. When I track where the song is located it is reading the wrong information. How do I change this as Edit>Preferences has the right location?

Select one of the tracks with a broken link, press ctrl-i to Get Info. Say No when iTunes asks if you would like to locate the track, then look at the Summary tab for the location expects to find the file in.
Now try to locate the file in question. The two locations should give a clue as to what to do next.
Here is an example with a file I've deliberately moved from the new layout to the old pre-iTunes 9 layout.
This means iTunes is expecting to find the file at:
D:\iTunes\iTunes Media\Music\a-ha\Take On Me\01 Take On Me.mp3
but it isn't there because I've moved it to:
D:\iTunes\iTunes Media\a-ha\Take On Me\01 Take On Me.mp3
which is where it would have lived back in iTunes 8 (though the media folder would have been called iTunes Music back then as well).
If you can provide the expected and actual locations of a broken track I should be able to suggest the easiest way to resolve things.
tt2

I clicked "locate" when prompted, now the track won't play at all even from the hard drive though it's listed in iTunes. Can anyone help?

I was prompted to "locate" a track, clicked yes, and now the track won't play no matter where I play it from. I've put it on the desktop, added it to library, tried everything - is there an equivalent "reconnect media" function like in Final Cut Pro? I'd be grateful for any help thanks

Will it play in Quicktime player? If not it may be corrupt and will have to be reloaded from the original source.

Is there a way to get iTunes to find tracks it can't locate on its own?

I have my iTunes music folder on an external drive, and my computer, for some reason, couldn't locate the songs on there for a few days. Now, it's back to normal, but many of the tracks have the little exclamation mark next to them, and when I try to play them, the computer tells me the original track could not be found, and asks if I'd like to locate it. If I search, I can easily find the track, but is there a way to have iTunes locate the tracks on its own?
Thanks!
Saul

Not that I know of. It's a pain.
Make sure you always have your exHD operational before you start iTunes, or this can happen.

Cisco Prime NCS + Location Tracking

I havent been able to find a straight answer in regards to using NCS and location tracking for RFID and wireless clients.
We currently have a 5508 with 3502i AP's
We would like to add some location based tracking. I understand that WCS will support it, but we would like to move to the new NCS so we can also manage our switches with in 1 appliance (and save on cost).
Can anyone tell me what I need to get this going?
Cheers

NCS can be seen like WCS 8.0, it supports everything WCS was supporting and more.
Current NCS 1.0 can only monitor switches and use them for location tracking. However, future NCS versions will be able to more fully manage switches and future NCS versions are targeted to become a merge between WCS and LMS.

I Tunes unable to locate music ?

I have just spent 7 hours updating our i-Tunes account. I successfully deleted the extra copies of tracks,located missing files,updated the library and then backed up the whole of i-Tunes.
I then backed up the whole I-Mac to an external drive and was busy patting myself on the back for an excellent job when I thought I would just check and see everything opened properly after a shut down. I didnt.
When i opened i-Tunes I could see all my albums,all the artwork,all the playlists, all the music files perfectly organised as I had left them.
BUT when I clicked on a tune to listen to it, i-Tunes gave me a mesage saying i-Tunes was unable to locate the music file ? I followed the link path to where the music was stored, user\music\ i-Tunes\ i-Tunes media etc and there was all the music as I had left it ??
When I clicked on any file in i-Tunes it could find it, but when I click on the media folder with the music in it opens i-Tunes up perfectly and plays my tune. I've tried emptying the whole i-Tunes library and then restoring it from i-Tunes folder but I get multiple copies of the allbums, missing artwork, missing files, some albums have one or two tunes missing and some are completely duplicated, e.g. I can see two copies of each track in the album..........I cant believe it ! why is i-Tunes so frustrating ? all I want it to be able to see one copy of each track on each album and keep it that way.
Is it something to do with my library ? is that corrupted ? should I delete the library and create a new one ? how do I do that ? How, (once I've got it back to how I want it) do I save everything and ensure it doesn't go reading something corrupt again. This is a nightmare...HELP

The exclamation mark for missing files is shown if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place. Changing the path to the media folder won't fix the links to files you've moved by hand.
Select a track with an exclamation mark, use Ctrl-I to get info, then say no when asked to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions. I can provide a step by step guide if you give me the two paths.
In some cases iTunes may be able to repair itself if you go through the same steps and locate the lost track. It may then offer to attempt to automatically fix other broken links. Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes. I would suggest you untick Edit > Preferences > Advanced > Keep iTunes Media folder organized before you start so that things don't have to move around as they are repaired.
tt2

Location to Track ID

Similar Messages

Maybe you are looking for