LocationFree cannot connect through NET AV

Hi. I just recently purchased the lf-v30. I have done everything described in the support PDF in regards to port forwarding yet can't pass the NetAV test to enable me to watch tv over the internet. I shouldn't have had to even bother with that as my router supports upnp but for some reaon that setup won't work either no matter what I do.
Please help me, I'd like to be able to justify this purchase.

Yea, I'd like to see some suggestions on this issue as well. I have another post describing my problem and situation, but bumped this post to the top since it seems to mirror my sentiments. I have try NUMEROUS things and nothing seems to work. It works great within my home network, but the NetAV check feature (for access outside my home) has never passed yet for my LF-PK1. Any help would be appreciated.

Similar Messages

Cannot connect to Net, have done for last 12 months no problem, I have other apple products that are connecting to the same hub happily. The hub is seen and the signal is strong, it just doesn't connect. I have reset the network settings with no joy.

cannot connect to Net, have done for last 12 months no problem, I have other apple products that are connecting to the same hub happily. The hub is seen and the signal is strong, it just doesn't connect. I have reset the network settings with no joy. Any help much appreciated?

Try restarting your WiFi router by removing power to it for 30 seconds.

Post Moved Cannot-connect-through-anonymous-prox...

Post moved to Other BB Queries http://community.bt.com/t5/Other-BB-Queries/Cannot-connect-through-anonymous-proxy/td-p/650446
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

You could try reading about wingates, socks and proxies (oh before i forget, turn off java, javascript, cookies, what's related, and smart update ... if you are using IE you're not very smart). Also try installing a firewall, or DHCP or you can learn from me!Here is the info of best 10 proxy software, from which you may try: http://www.techyv.com/article/top-10-free-proxy-software

Equium L40 - cannot connect through wifi or the ubs lead plugged in

Hi
I have a Equium L40. I cannot connect through wifi or the ubs lead plugged in.
It comes up " Internet Explorer has stopped working. a problem caused the program to stop working correctly"
It is saying in am connected to my hub and have a strong signal.
Can you help
Thanks
Steve

Hello Steve
Have you tried to use some other browser?
Do you use Skype or some other messenger? Can any of them connect properly?
I dont know what the real problem is. Non working Internet explorer or WLAN connection in general?

Update issues. says cannot connect to net but it is? Access itunes fine but wont connect for update, only occured when i did update to itunes on computer...help!

Installe dnew copy of itunes, now cannot update when propmted after plugging in ipod, says not connected to internet. then trie to go itunes, which was fine. computer is connected to net ....
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
System manufacturer System Product Name
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 0012AC880C0FDE28
Current user is an administrator.
The current local date and time is 2011-07-06 01:02:01.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA GeForce 7025 / NVIDIA nForce 630a
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: f3716be92491fd1a33f7e647a889bf41
iPodService 10.3.1.55 is currently running.
iTunesHelper 10.3.1.55 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {BDA8D3FD-3CCE-4BCF-A357-0A51184CF67C}
Description: NVIDIA nForce Networking Controller - Packet Scheduler Miniport
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Wed Jul 06 00:38:07 2011
Lease Expires: Thu Jul 07 00:38:07 2011
DNS Servers: 192.168.1.1
Active Connection: (none)
Connected: No
Online: No
Using Modem: No
Using LAN: No
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-07-06 00:56:50.
diagnostic report. no windows firewall, norton security 2011

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
 Cheers, Tom

AirPort Cannot Connect To Net

So I just switched to SBC Global (DSL) and since that time I cannot get my AirPort to work anymore. I can connect to the net with I am plugged in directly to the modem, but cannot get an IP when I plug the ethernet cable into the AirPort.
Suggestions?

Still having issues.
I have tried to put in a manual IP address into my AirPort Utility. No go.
SBC says they do not support AirPort problems, and I would have to call Apple, but the number they gave me doesn't seem to work (800.500.7870).
I have read a bunch of threads on issues like this, but they all seem to be unique in nature. The thread I have found that best resembles my issue is this one:
http://discussions.apple.com/thread.jspa?messageID=5418540&#5418540
but, I have tried the things in here and I still cannot connect (specifically the IP address issue in this thread seems to be one I am having).
Please help.

User cannot connect through VPN (Windows 2008 R2)

Hello,
TechNet has been a major help for some resent server and network problems our office has been having.
There is one ongoing issue that no matter how much I try to fix, it wants to be stubborn and refuse to work properly.
We have a user who has the necessary permissions to VPN using our router's IP address. Just recently, she found that she was unable to VPN. This was the beginning of our technical issues as after rebooting the router, our main server, and our QuickBooks
server, we lost internet and access to the main server. Those issues have been resolved. However, the user is still unable to VPN.
I have looked up every error code that has been presented when trying to connect to VPN (807 and 800 are the most frequent), and unfortunately, none of the solutions suggested worked. These errors occur when connecting through the WAN Miniport. I am trying
to find out if I am overlooking something.
What has been tried:
Router rebooted
Created new user in Active Directory
Deleting VPN Users group and readding to user
Changing tunneling protocol to L2TP instead of PPTP. Then, created a rule in Windows Advanced Firewall to allow UDP 1701.
Creating new VPN connection.
Confirmed with ISP that there are no issues with router
I am not extremely familiar with Windows 2008 R2 and every fix I see online is extremely in depth with not much walkthrough information.
I greatly appreciate any support anyone might be able to provide.
Thank you!

Hi ,
According to your description, my understanding is that the client can’t access the VPN with error code 800 and 807.
I have noticed that it failed to ping the VPN server form the client. The VPN server should be connected from the client without VPN connection established. I suggest you to turn off firewall temporarily on both sides of client and VPN server, then
try to ping the IP address of the VPN server’s interface which is connected to extranet network.
If ping failed, there might be network connectivity problem. If ping successfully, check to see if the port is open for turning traffic. Detailed troubleshooting steps you may reference the link below:
I received error 800, which says the VPN server is unreachable:
http://technet.microsoft.com/en-us/library/cc772616(WS.10).aspx#BKMK_1
Troubleshooting commom VPN related errors:
http://blogs.technet.com/b/rrasblog/archive/2009/08/12/troubleshooting-common-vpn-related-errors.aspx
If this problem still exits, does other user successfully access the VPN? Or just specified device can’t access? Would you simply describe the deployment of the VPN, such TCP/IP settings, VPN type.
Best Regards,
Eve Wang

Clean install W7 Pro - no drivers, cannot connect to net, help needed

In a few words..
Got in office E 550 for work, it was full of bloatware and in my language which is useless for work..
After installing clean Windows 7 Pro I cannot connect neither to Wifi or LAN. I have downloaded drivers from Lenovo, to another computer, transfer them with USB to Lenovo on C: and install but still not working and that little computer sign in lower right corner is red crossed. Any help please as this is office computer which I need for work. Our IT is not here in same town...
Im also getting message that "Windows did not detect any networking hardware"
EDIT: errors

Welcome to the Lenovo Community !
If did not install the Intel Chipset Driver and the Intel ME Driver I recommend you do so. Those drivers needs to be installed first so that the operating system will correctly installed the remaining hardware drivers.
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

Cant connect through Net 8.

Hello, Im a beginner Oracle8i (WinNT) developer. I recently used Oracles Database Configuration Assistant to create a new database (previously I only had the starter db from the initial install).
After adding a second database all of my Net Service Names that previously connected to my starter database stopped connecting. Furthermore I cant configure a new connection to my new database.
Help, Andrew
null

Hello Daniel, I am pasting my listener.ora and tnsnames.ora files for both my Win98 client and WinNT server.
For the client tnsnames.ora file, I used to be able to connect to my started database through either ORACLE2 or TESTORACLE2 (disregard ANDREWPC). After I created a new database (oracle3) I was no longer able to connect to my starter database (db_name = oracle2, SID = firstdb2). Any ideas???

# C:\ORACLE\ORA81\NETWORK\ADMIN\LISTENER.ORA Configuration File:C:\Oracle\Ora81\NETWORK\ADMIN\listener.ora
# Generated by Oracle Net8 Assistant
# C:\ORACLE\ORA81\NETWORK\ADMIN\TNSNAMES.ORA Configuration File:C:\Oracle\Ora81\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle Net8 Assistant
ANDREWPC =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = productions)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = oracle.firstdb)
ORACLE2 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = PRODUCTIONS)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = oracle2.productions2)
(INSTANCE_NAME = startdb2)
TESTORACLE2 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = productions)(PORT = 1521))
(CONNECT_DATA =
(SID = startdb2)

# C:\ORACLE\ORA81\NETWORK\ADMIN\LISTENER.ORA Configuration File:C:\Oracle\Ora81\network\admin\listener.ora
# Generated by Oracle Net8 Assistant
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = PRODUCTIONS)(PORT = 1521))
(DESCRIPTION =
(PROTOCOL_STACK =
(PRESENTATION = GIOP)
(SESSION = RAW)
(ADDRESS = (PROTOCOL = TCP)(HOST = PRODUCTIONS)(PORT = 2481))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\Oracle\Ora81)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = oracle2.productions2)
(ORACLE_HOME = C:\Oracle\Ora81)
(SID_NAME = STARTDB2)
(SID_DESC =
(GLOBAL_DBNAME = oracle3.productions2)
(ORACLE_HOME = C:\Oracle\Ora81)
(SID_NAME = FS10)
# C:\ORACLE\ORA81\NETWORK\ADMIN\TNSNAMES.ORA Configuration File:C:\Oracle\Ora81\network\admin\tnsnames.ora
# Generated by Oracle Net8 Assistant
ORACLE3.MIA.BELLSOUTH.NET =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = PRODUCTIONS)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = oracle3.productions2)
EXTPROC_CONNECTION_DATA.MIA.BELLSOUTH.NET =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLE2.MIA.BELLSOUTH.NET =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = PRODUCTIONS)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = oracle2.productions2)
null

Cannot connect to net at my home...

But everywhere else it seems to work.
My neighbor came over and connected with his Macbook, no problems, all 3 of my other wireless laptops connect with no problem?
Spent 3 hours with Apple, they cant figure it out.
Spent a couple of hours with my ISP they cant figure it out.
I've had it with this whole Apple experience so far.

What version MacBook Pro do you have?
Can you connect with an ethernet cable to your router and get on the net that way? if so, have you run Apple software update?
I assume from your wireless connection, you cannot then see your network (SSID) from the Airport menu. (Or can you?)
Is your network encrypted? If so, are you putting in the right key and specifying the proper method such as wep or wpa?
Have you gone into the network control panel and checked to make sure Airport is activated?
MacBook Pro 15" / OS X Mac OS X (10.4.8) MacBook Pro 15" 1.8 GHz / 80 Gb / 512 Ram

Can connect to server, cannot connect through Ical/chat/etc

Hi all I seem to be having trouble with Ical on my mac os x server. Error message as follows.
Connection Failed
There may be a problem with the server or network. Check the settings for account "XXXXX" or try again.
Account "XXXXX" network is unreachable.
The error message I see whenever I attempt to connect to our server via Ical.
I have set through setup through server preferences Ical and the like. I can connect to the server in every other way I have tried, from ping to screen share and via finder. So nothing wrong with the connection.
Things I've tried.
Restarting the entire network.
Reinstalling the server os on the server computer and setting up everything again.
Turned off firewall.
Thanks in advance.

I would recommend the usual basic troubleshooting:
1) Repair Permissions in Disk Utility, then reboot.
If that doesn't work,
2) Re-apply the latest Combo Update in safe mode (boot while holding shift).
http://support.apple.com/kb/DL1048

Cannot connect through TCP/IP

On a single NT workstation I have (a) Developer 6 (b) Oracle 8i Enterprise (c) Application server - all on different homes.
I can connect to the database from Dev 6 if protocol is IPC but not if it is TCP. I can Ping the host successfully and Listener is opening to port 1521 if I use TCP.
If I Tnsping the database the address is successfully resolved but I simply timeout. No error message.
Can anyone help?

Yes, you have to configure a connect string (connect_string) your
tnsnames.ora and use it while connecting to the database from the client. Add
appropriate values for connect_string, ip_or_hostname and sid :- 
 
Here are the options to configure:- 
 
Option # 1: Oracle Net Configuration Assistant 
 
You can use the above (Start -> Programs -> Oracle...) if Oracle Net component
is installed in your client machine. 
 
Oracle New Configuration Assistant -> Local Net Service Name configuration ->
Add -> 
Service Name : sid.domain or just sid 
Protocol: TCP 
Host name: ip_or_db_hostname 
Choose the standard port 1521 (default) 
Perform a test to check the config (by default it will try to use
system/manager, change it to a valid logon and test it again) 
Net Service Name : connect_string 
 
or 
 
Option # 2: Oracle Net Manager 
 
If using Oracle Net Manager, click on Service Naming, then on the menu click
EDIT --> CREATE 
Net Service Name : connect_string 
then rest is all same as specified in Oracle New Configuration Assistant. 
 
or 
 
Option # 3: Manually edit tnsnames.ora and add entry. A typical
TNS entry in tnsnames.ora would like like below:- 
 
<connect_string> = 
 (DESCRIPTION = 
 (ADDRESS_LIST = 
 (ADDRESS =
(PROTOCOL = TCP)(HOST = <ip_or_db_hostname>)(PORT = 1521)) 
 ) 
 (CONNECT_DATA = 
 (SERVER = DEDICATED) 
 (SID = <sid>) 
 ) 
 ) 
 
Hope it helps, 
Babu Rangasamy

Computer cannot connect through WRT350N to Internet

The following is a copy of an email I sent to Technical support (which I was afterwards informed is no long being serviced -- not making me happy as a new customer) ...
Through both wired and wireless connections ping and browser access to the router/Web configuration tool are successful.
Router has been reset to factory default and configured though the Web configuration tool with only the minimum required setting to establish an ISP connection.
Firmware is at the latest available version: v1.03.2 (factory installed)
ipconfig reports expected IP, subnet mask and default gateway.
Full power cycle of all components performed.
The router Web configuration tool indicates that a connection to the Internet has been established and is available (see below).
Status > Router > Internet Connection > Login Status: Connected
Administration > Diagnostics > Ping Test:
PING www.l.google.com (64.233.167.104): 32 data bytes
40 bytes from 64.233.167.104: icmp_seq=0 ttl=246 time=21.6 ms
40 bytes from 64.233.167.104: icmp_seq=1 ttl=246 time=21.5 ms
40 bytes from 64.233.167.104: icmp_seq=2 ttl=246 time=21.1 ms
40 bytes from 64.233.167.104: icmp_seq=3 ttl=246 time=21.4 ms
40 bytes from 64.233.167.104: icmp_seq=4 ttl=246 time=21.2 ms
--- www.l.google.com ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 21.1/21.3/21.6 ms
Attempts to ping or browse the Internet from either wired or wireless connections fail ... thoughts? Thx!

My experience so far:
Everytime this router would power cycle every computer connected to it either wirelessly or through the wired ports would lose access to the internet. The only way I could figure out to regain internet access for the connected computers was to reset the router to factory defaults and start over reconfiguring everything.
However, by experimentation and something I saw on another forum, I disabled UPnP support and now I don't seem to have any further problems with connecting computers to the internet.
Administration --> Management --> Upnp: DISABLED
Mike
Message Edited by mdernst on 07-15-2007 05:15 AM

Can't connect through "extention"

I cannot connect through "extentions" in Illustrator CS4, which I just recently purchased. I can get to the Kuler site, but not through a Kuler desktop program.
I'm lost. Any suggestions? I read another thread on this problem, but it's from 2008!

This does not seem to be a support forum since there is no support...
Due to limited access to the classroom I've just installed the Adobe air version, but it suffers from the same problems...
Because it seems Kuler points to:
http://www.robtex.com/ip/76.74.170.30.html
IE -> internet tools -> Connections -> Lan settings -> select proxy setting -> click advance
In the box for “Do not use proxy for addresses beginning with”
Add:
;76.74.170.30
HOW is it possible that developers can still create software without taking Proxy servers into account.
Adobe? Any response at all?

TS5209 Airplay won't connect through my Mac Book Pro but works on everything else.

My MacBook Pro (1 year old) cannot connect through Airplay to my Apple TV. I receive an error message that simply says, "Could not connect to Apple Tv."
The Apple TV and computer are completely up to date. The Apple TV works with all other devices and my Itunes Library shows up in Home Sharing.
I cannot figure this out and I am pretty annoyed with the issue.
Any help?

You reformatted the HD, which was originally formatted for Windows (NTFS format is the typical HD format for Windows).
So you did erase completely its content, and now it is formatted in HFS format (HFS is the typical HD format for Windows).
If you want to employ Time Machine, you need a drive formatted as HFS (Mac), and you cannot use it for any other task.
If you want to share the drive content between Macs and Windows computers, the drive must be formatted for Windows (NTFS format), and then you can read & write over it from a Mac if you installa the Tuxera software on your Mac.
Or you can format it for Mac (HFS format), and then read and write to it by installing the MacDrive software on your Windows computer.
Theoretically, a new disk format exists, which is compatible natively both with Windows and Mac. It is called exFAT (also known as FAT64), and is typically employed for external USB storage units. My experence with eXFAT, however, is unsatisfactory: the Mac tends to corrupt the volume, which needs to be "fixed" using a Windows machine.
Currently all my external USB drives are fromatted as NTFS, and hence I had to installa Tuxera on all the Macs owned by me, my wife and my son. This is very reliable, but it does not allow to use Time Macine.
We employ other backup solutions, with more manual control over what is backed up and what is not... And these do not require that the external disk is formatted as HFS (Mac).

LocationFree cannot connect through NET AV

Similar Messages

Maybe you are looking for