Lock a storage location to avoid futher next movements

Hi gurus
Today I've closed a storage location belonging to a plant which has many other SL.
To avoid further posting on it, Is it possible to lock it using a way different than authorizations (too many time will be required !!!!)
Thanks in advance for your help.
Claudio

Hi,
This question has been asked several times on the forum.
Re: Delete storage location from material
Re: de-activating a Storage Location in MM ?
Regards,
Csaba
Edited by: Csaba Szommer on Nov 6, 2009 7:25 PM

Similar Messages

Locking logical storage location (MM)

Hi,
how can I lock logical storage (MM) during an inventory ?
Best regards

In SAP you can set teh block indicator when creating the PID in MI31.
Organisational blocking is much tougher and case specific. To give you a recommendation you would have to describe your situation in more detail

I have an IPhone 3Gs and the IOS 6 locked up my phone 100% whats my next move? wont turn on just the apple and download bar or black screen thats my only options at this point? HELP!

I downloaded the new IOS 6 on my IPhone 3Gs as it prompted me to do so. so that took 45 mins then told me to connect to Itunes in which i did, then it took 39 mins for itunes to "restore" my phone and after the 39 mins it told me Apple unable to restore IPhone and shut me out. Next a screen popped up on my computer screen and said that i could report the problem to Apple if i wanted to. But at this point my phone is completly locked out. So all i get from my phone right now is the Apple on the screen and the download bar under it and or a block screen if i unplug it and the battery dies. which when i did the upgrade my phone was just off a fresh charge! i need help like ASAP i leave out of town on thursday it is monday and i need a phone with GPS and that can make calls! i am pregnate and have a 2 year old i am traving with and we have no house phone so my phone is very important! THANKS!

No. You have no alternative but to plug it into a computer running iTunes and restore it.

CJ20N, auto-defaulted storage location at activity level

Hi all,
we have this problem at CJ20N (PS) screen.
At activity level, componenent overview, if user keys in the material no, a storage location is auto-defaulted
later we found out that if the material is extended to only 1 storage location, the storage will be auto-defaulted at componenet overwview, is there any setting to prevent the auto-defaulted storage .. pls advice

Hi,
Carry out these IMG steps:
SPRO
Logistic Execution
Basic Shipping Functions
Shipping Point and Goods Receiving Point Determination
Set Up Storage-Location Dependent Shipping Point Determination
Assign Shipping Points According to Storage Location,,,,,,,,
Put in your combination of Shipping Conditions / Loading Group/ Plant/ Storage Location/ Proposed shipping point
Next time you create a Delivery document,, the system will pick up the above values from the Material/Customer master records and propose a Storage Location at line item number.
I just tried it and it works, let me know if this works.
Cheers,
Mohammed
Edited by: Mohammed Raheel on Jun 5, 2009 1:09 PM
Edited by: Mohammed Raheel on Jun 5, 2009 1:11 PM

Storage Location In Goods Receipt.

Hi experts!
In automatic goods receipt for Production Orders, the storage location to the good movements is defined in material master (MRP2 - Production Storage Location), and copied to Production Order during the creation.
I have some semi-finished materials that can be used to produce more then one finished materials, where the goods issue for this material are executed in diferent storage location. I want that the storage location to SFP goods receipt is defined in accordance with your use in the next production line (FP).
Example:
Material 10 (SFP). This material is component of the material 20 (FP) and material 30 (FP). In production of the material 20, the goods issue storage location is A. In production of the material 30, the goods issue storage location is B. If the Production Order of the material 10 is created to reservation of the Material 20, the storage location defined in Production Order of the material 10 is A. If reservation of the material 30, storage location B.
In short, i want know that is possible change the goods receipt storage location automatically, looking the next Production Order goods issue storage location.
MTS Environment.
Picking by MF60 is not a option, we need send the material directly to the next goods issue storage location.
Any suggestion?
Thanks a lot.
Best Regards,
RMS

Hi,
I can think of three things to check which determines storage location automatically.
Please go through each of these things and check what is applied to your scenario.
1) Check whether you have given production storage location in MRP2 view of material.
If you maintain prod sto loc at material level of SFP, it will be copied to all the production orders for all the FPs.
e.g. for Material 10 (SFP) you maintained prod stor loc (Lets say A sto loc) at MRP2 view, Sto loc A will be copied to all the production orders of both FPs Material 20 and Material 30.
2) Check whether in the work center you have assigned a supply area, supply area is usually assigned to storage location.
3) Check BOM of that material, go in to each of the component details and go to "Status/long text" tab and check whether you have assigned supply area or production storage location.
If you maintain it at the BOM item level, sto loc will be copied from here.
e.g.
In BOM details of Material 20 (FP), go to BOM Item details of Material 10 (SFP) and maintain sto loc A in supply area or production storage location of Status/long text" tab.
It will copy prod sto loc A for all the production order of Material 20 (FP)
In BOM details of Material 30 (FP), go to BOM Item details of Material 10 (SFP) and maintain sto loc B in supply area or production storage location of Status/long text" tab.
It will copy prod sto loc B for all the production order of Material 30 (FP)
I think this is what you want, you can maintain diff sto locations in BOM as explained above, It should solve your issue.
I hope this explanation is sufficient to solve your problem.
Do revert in case you need more explanation.
Regards,
Abhay Kapase
Edited by: AbhayKapase on Aug 7, 2011 7:38 AM

Picking up the required Storage Location

Hi Gurus,
The scenario is.....
Have a raw material R1 which is stored in storage location S1 & S2 both. R1 is consumed by finished material F1 and F2. The requirement is that if R1 is consumed by F1 then the system should look into store S1 and if R1 is consumed by F2 then the system should look into store S2.
Have assigned the respective storage location in the BoM component detail screen in the master recipe.
Note:
1. In order type parameters, have maintained the component and operation detail verification.
Am I missing something,
Tarang

Dear Tarang,
I'm unable to undersatnd your requirement.
As you maintained the Prod.Storage location for the components in BOM - details
screen,this will be picked automatically.
If you have not maintained any storage location here in the BOM,then the system
takes the value from production stroage location from MRP2 view in the material
master.
IF you want the sytem to consider first the stock of a particular storage location
and then to next one means,I think this is possible only using Stock
determination rule.
Regards
Mangal

Storage location mandatory for inter stock transfer

Hi,
Document where only issuing plant has storage location and user has not entered storage location in destination tab.
It is observed that where u201Cstorage locationu201D is missing in u201Cdestination tabu201D, system is not able to determine batch no ( mvty 351 ). Since batch number is not fetched it gives further error in Batch level valuation and subsequent issue at some different price.
Please analyze the above issue suggest us as to making storage location mandatory to solve batch valuation problem.
I have tried to add storage location field LGOBE in the mvt type 351. I am getting error field LGOBE is not allowed with mvt type 351.
Please help me urgent.
Thanks in Advance,

Hi,
With mov type 351 you issue the material from the supplying plant. This material is then get transfeered to the INTRANSIT stock.
Once you do goods receipt against the STO this Intransit stock is moved to the Receiving Plante.
Hence, no destination storage location will be allowed for mov type 351.
Rajesh

Precising storage location in MB1B

Hi. I have a problem with movement type '303'. There is no possibility in our MB1B to precise which storage location we would like to move our matnr to?
http://www.woiz.polsl.pl/eklfeniks/test/
That's a screen from my MB1B. In case of movement type '301' in place of red 'circle' there is a field 'Storage location'. How to achieve that effect in '303' movement type? Where to set that property? I'd be very thankful for useful info. Greetings. P.

Hi,
As per ur screen shot u have entered 2nd screen.
In that place u have to maintain receiving plant not sto loc.
below the item details are the supplying plant details.
So in ur case instead of receiving plant system displaying receiving site.
Path: Tcode: OMBW. select ur mvt type.go to details.double click on transfer postings. see the receiving plant description.
U tel to ur abaper to change the description as mention in above field.
This wil solve ur problem.
Reward if useful
Regards
Viru

No QM for storage location

My requirement is if material is received to certain storage location, it should not generate inspection lot.For remaining all storage locations, quality is required.How is it possible?

You can't limit QM by Storage location.
Waht I usually recommend is to copy the standard MM you would use and create a custom one, i.e. 411 to 911. Turn off QM for the 911 movement type in configuration. Users are then trained that when receiving to storage location xxxx they must use movement type 911. You could check with your MM people than to see if you can use a user exit in the MM to verify that the correct MM isbeing used if certain storage locations are being used.
FF

Movement Type 340 doesn't have Storage Location Associated with it

When a batch is given a new valuation type, there is no storage location associated with that movement, because the movement would be for the entire batch obviuosly. In BI though, that creates a problem, because the movement needs to have a storage location assigned to it. Here is an example of the problem:
Storage Location----Batch--Xbuy Current Stock-----Cert Current Stock
..........0001...................122....................100......................................0
Then batch 122 is moved from xbuy to cert. But, since there is no storage location associated with that movement, the current stock now looks like this:
Storage Location----Batch--Xbuy Current Stock-----Cert Current Stock
............#.......................122...................-100...................................100
..........0001...................122....................100......................................0
But it should look like this:
Storage Location----Batch--Xbuy Current Stock-----Cert Current Stock
..........0001...................122......................0......................................100
We are using the standard SAP Extractor for this inventory model, and I am curious as to whether there is a fix to this out there, or how we should go about fixing it?
Thanks,
Owen

The problem I am having is kind of a display and a data issue. All the data from the source system is coming over to BI in this case, but the problem is that the two systems are fundamentally different. In ECC, a batch can change from one valuation type to another with no thought to storage location, and that works just fine. However, when that same record is in BI, if it doesn't have a value for every characteristic in the model (including storage location in this case), then the ad-hoc report won't drill down correctly.
To answer your options:
1. We don't have the option of just not showing storage location, because this problem would render storage location useless because of data inconsistencies, and storage locations are an important part of our business.
2. We have several storage locations, so this will not work either.
Also, since we have several different storage locations we use, there is no way to just assign storage location 0001 to every empty record. However, I am thinking of a solution along these lines. If there was somewhere we could go to see the storage location of the particular batch, then we could fill the storage location at the time of the data load. The problem we would need to overcome though is timing. How do we do this for historical data that has moved storage locations? What if the movement goes to the delta queue, and then the storage location changes?
Thanks,
Owen

MB5B Movment type and storage location is reset

When I run the report MB5B with radio button "valuated Stock" active for a specific Plant and Movement Type, I get a Message "Movement Type is reset" and then the entered Movement Type disappears from the selection criteria.
However the report does not give me this message when the radio button "Storage Location/ Batch Stock" is active.
Also, When I run the report MB5B with radio button "valuated Stock" active for a specific Plant and Storage Location, I get a Message "Storage Location is reset" and then the entered Storage Location disappears from the selection criteria.
However the report does not give me this message when the radio button "Storage Location/ Batch Stock" is active.
Please tell me why does this happen when the radio button "valuated Stock" is active ?

Dear All,
I am facing the problem as said in the thread.
My two queries are as follows:
Query 1: In MB5B report When we select the valuated stock option ,We are unable to use movement type , storage location in the selection criteria nad getting the below messages.
M7284 - Storage location is reset.
M7298 - Movement type is reset .
Query 2 :In MB5B report total receipts and total issues is showing incorrect values.
Here say for example I prepared the grn, cancelled the grn and again made the grn. Here total receipts is considering in such a way that all the grn quantities are considered. and cancelled documents are considered as issues.
ie have received material = 100 Nos 01-12-2009
cancelled grn:100 Nos
Redo grn:100 Nos
Done transfer posting 415 Q = 10 nOS = 02-12-2009
Issued = 10 nos = 02-12-2009
In mB5B 01-12-2009 to 02-12-2009
We are getting Opening stock= 0 which is correct
Total receipts = 100(GRN IST TIME)+100(GR SECOND TIME) +10(TRANSFER POSTING)=210
Total issues = 100(CANCEL GRN)10(TRANSFER POSTING)10(GOODS ISSUE) =120
Closing stock = 90(CORRECT)
Here actual recipt: should be 100
actual issue should be 10
Here though the closing stock is correct , 415 transfer posting is considered as issue and receipt.Becoz of this total issues quantity report is going wrong.
Please give your valuable suggestions to the above two problems seperately.
Regards,

Storage location for 331 movement

Dear All.
Is it possible to assign storage location for sample usage movement in UD inspection lot stock tab. our requiremnt is through lot post material by 331 movement to Scrap storage location.
Regards.
dev123

Hello Dev,
Not really!
By 331 movement stock reduces from system.
Storage location is required for those movement types for which stock is either stored or transferred from one location to another.
What you can do is, you can transfer this quantity to block stock instead of sample usage. Later you can scrap this by 555 movement.
Regards,
Anand Rao

Movement type authorisation for different storage locations

Hi sdners
can we make the movement type restricted to any storage location
Ex: i have 2 storage locations 1110 and 1114 in plant 1100
and i have two end user mst1 mst2
if so i want to make sure that mst1 is responsible only for issue goods from 111o
and he should not able to issue goods from 1114 vice versa to mst2
is there any possible configuration please let me know.
With regards
S.K.chaitanya

Hi
u can achive this through authorization
First
You need to activate the storage location authorization check for goods movements in config
SPRO->Materials Management->Inventory Management and Physical Inventory->Authorization Management->Authoization check for storage locations.
Then required control is achieved via authorization object M_MSEG_LGO.
Get in touch with Basis and ask him to remove required storage location from user ID so that that user will not able to pass any movement to that storage location
Vishal...

Stock Transfer between 2 Storage locations

Dear All
I want to configure Stock Transfer between 2 Storage locations.
I have activated the same in configuration but can anybody provoide complete details at to how the process happens.Is there any standard document type to be used like UB in case of stock tranasfer between plants,do we craete SD Delivery etc.
Regards
Vaibhav Mahajan
Edited by: Csaba Szommer on Aug 22, 2011 12:56 PM

Hi
Stock Transfer between 2 Storage locations,there is no seperate configuration needed( like stock transport order b/w plants doc type UB), just goto MIGO
There are 2 options are there for Stock Transfer between 2 Storage locations
1. one step procedure movement type 311(from unrestricted to unrestricted)
323(from quality to quality)
325(from blocked to blocked)
2. Two step procedure movement type 313 and 315(only possible from unrestricted to unrestricted stock)
During this transfer no accounting document will generate because you are transferrring the stock within the plant,
Thanks

Move from storage location- blocked to other strg. loc. - blocked

It's possible to move a material (with batch) from a storage location (stock blocked) to another storage location (stock blocked) using one movement? If yes, what's the movement? If not, what is the simples way to move it?
Thank you.
Edited by: Was Wasssu on Jul 8, 2010 10:11 AM

Hi.
Use 325 movement type in MB1B t-code.
SAM

Lock a storage location to avoid futher next movements

Similar Messages

Maybe you are looking for