Lock and keyboard sounds not working?  what's up with that?

lock and keyboard sounds not working?  what's up with that?

Im having the same problem. Just stopped working yesterday two days after i bought it!!!!

Similar Messages

  • My screen is black and keyboard is not working. USB is good. Caps lock light will not turn green like I have no power. Any suggestions

    My screen is black and keyboard is not working. USB is good. Caps lock light will not turn green like I have no power. Any suggestions

    Ouch, doesn't sound good, but...
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.
    Intel-based Macs: Resetting the System Management Controller (SMC)...
    http://support.apple.com/kb/HT3964

  • I have a black MacBook from 2008 and tried downloading snow leopard 10.6. It told me I had to restart my computer. However once I restarted my MacBook my touchpad and keyboard were not working so I am unable to sign in. I have no idea what the problem is

    I have a black MacBook from 2008 and tried downloading snow leopard 10.6. It told me I had to restart my computer. However once I restarted my MacBook my touchpad and keyboard were not working so I am unable to sign in. I have no idea what the problem is

    You cannot download the upgrade to Snow Leopard.
    Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    Upgrading to Snow Leopard
    You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s MobileMe service; fees and
               terms apply.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer)
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
             3. MacBook Pro (Mid/Late 2007 or newer)
             4. MacBook Air (Late 2008 or newer)
             5. Mac mini (Early 2009 or newer)
             6. Mac Pro (Early 2008 or newer)
             7. Xserve (Early 2009)
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
         Am I eligible for the free upgrade?
             See Apple - Free OS X Mountain Lion upgrade Program.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

  • Touchsmart 520-1047c Mouse and Keyboard will not work after sleep mode

    I have an issue which I need some help with. When my computer goes to sleep the wireless mouse and keyboard will not work unless I restart, however each one will wake the system up but will not operate after that. I have tried just making the display go to sleep, both go to sleep but that makes no difference same issue occurs. The only work around I have found is going into the power settings and turning the sleep mode off for booth the computer and display. This does not solve the problem it just masks it. New batteries, unplugged and replugged the dongle, updated the bios and all drivers. Don't know what else to try. Anybody know how to fix this? Thank you in advance for your help.

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that the mouse and keyboard on your desktop computer does not work if your computer enters sleep mode, and I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). This should help enable your system to wake from sleep mode using your wireless keyboard and mouse. I also recommend connecting wired peripherals to diagnose the functionality of your keyboard and mouse. If your system is still not able to wake from sleep mode, please follow the steps below to restore the default power schemes on your computer: Step 1. Click the Start button
    Step 2. In the search box, type "Command Prompt"
    Step 3. Right-click Command PromptStep 4. Click Run as administrator
    Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter  reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards  

  • HT201407 Ipod My daughter locked my iPod with a code and now she does not remember it  It is locked and it will not work connected to iTunes

    My daughter locked my iPod with a code and now she does not remember it  It is locked and it will not work connected to iTunes

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    Forgotten Restrictions Passcode Help
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    Also, see iTunes- Restoring iOS software.

  • The g, h and backspace on my keyboard are not working even after replacing with a new one.

    The g, h and backspace on my keyboard are not working even after replacing with a new one. I have also updated my BIOS still d same. Please help me ASAP.
    ...am waiting for a QIUCK RESPONSE

    How does a usb keyboard attached externally work?
    You might try a "hard reset" where you remove battery and AC charger, hold down power button 20-30 seconds and then reassemble and turn on. Reset BIOS (F10) to default settings, too. 

  • After i use 4.3.3 for iphone 4. the notification for facebook and yahoo do not work. what is wrong? anyone can help?

    after i use 4.3.3 for iphone 4. the notification for facebook and yahoo do not work. what is wrong? anyone can help?

    I am also on my forth hard drive on the same model.
    When I unpacked the computer, the hard drive did not include OS X either. Actually, it was completely blank. Did not even have a partition table! I have also had random problems with the machine not charging.
    I have replaced the drive myself with an SSD after figuring the Apple Certified technicians were incompetent. Now even the SSD is starting to fail
    I have bought an HP laptop and setup Ubuntu on it. Hope it turns out better than my previous four various Mac models. All have had various repeating hardware issues that Apple Certified technicians have been unable or unwilling to correct.

  • HT6146 my wifi and bluetooth is not working what sholud i do

    when i upadte my iphone 4 in ios 7.1.1 my wifi and bluetooth is not working
    what should i do ?? :(

    What doesn't work?
    What problem are you having?
    Remember for the iPhone to see and connect to Bluetooth devices they must be in, "Discovery Mode".

  • HT1430 When charging my Ipad mini, it turned off and its still not working, what do i do pls??

    When charging my Ipad mini, it turned off and its still not working, what do i do pls??

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • I got the iphone 5 from Australia and I put in a Sim cards from GREEK company and it is not WORKing WHAT can I DO

    I got the iphone 5 from Australia and I put in a Sim card from GREEK company and it is not WORKing WHAT can I DO

    I did ALL REQUIRED STEPS with the Australian Sim cards but when I put GREEK Sim cards in ,mobile closes

  • Soft KeyBoard is not working on ios 7 with Air sdk 3.8

    Hi
    In my app Soft KeyBoard is not working on ios 7 with Air sdk 3.8. Does any one know soluton for this ?

    Hi,
    There's no question that TextFields and TextAreas weren't working in our case, likely because we have a deep displaylist with a variety of object types. Presumably, AIR has changed how it looks through the displaylist for objects that need keyboard, and perhaps we have an object type somewhere in the hierarchy that AIR no longer recurses. It's definitely something that changed, though.
    It's no picnic to put together a sample app, I can't afford that time when I have a solution. But the symptom was very clear, a textbox would open, and the cursor would just blink with no way of interacting with it.
    I'm happy using StageText directly, because it's a more direct way to interact with the OS and gives more control.
    It also solves a bug in AIR that I haven't reported yet, but is as follows. Rarely, when you move the container of a TextField of TextArea after it has been created, AIR will crash and freeze iOS devices. It doesn't happen on Android or desktop, but with a user-base of about 100,000 of our app, we've had it reported maybe 50 times. One of our dialogs sometimes needs to reposition the elements, which is done animated. During this, AIR will crash about 0.01% of the time. We tried only creating the TextArea, but not activating it or even having it visible, but even an invisible TextArea will crash, presumably because AIR moves the internal StageText overlay around as well, and this confuses iOS after a while during the animation.
    By using StageText directly, I finally also have a way to get rid of this bug, because I simply don't activate StageText until the object has already been positioned. Prior to that, it isn't even an editable text field, it's a label like anything else. So I'm happy I did this solution.
    Let's just leave this thread as a record if someone else has the same problem. I'm quite sure it's because of our very complicated display list, and AIR having changed how it scans the displaylist for objects that need keyboard.
    Best,
    Per

  • I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank.  I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Y

    I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank.  I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite.  Please help!

    Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.

  • Message tone, music, lock/keyboard sounds not working...tried everything =[

    Hey all, iPhone 4s has gone mental!
    I have read through many posts on sound not working and i have tried everything, previous back ups, complete restore, clean out the headphone port, hard restore, also the volume buttons on the side when pressed will show ringer but no volume adjustment bar pops up =/ and the change volume with buttons is 'on'
    unless my headphones are plugged in nothing works, except my ringtone.
    any other suggestions to fix this would be massively appreciated =]
    Cheers all

    same with me
    what we should do??

  • MAC Mouse and Keyboard Do Not Work, when I am trying to re-install the OS using "Command R" option

    I am trying to re-install MAC OS 10.8.2, but when I hold "command R" I am asked for the firmware password, but the keyboard and mouse do not work.
    If I only select "option" during the boot up process it will ask me for the firmware password, keyboard and mouse work, but I can only select the HD option.
    Can someone advise what is the problem here, and your resolution.
    I have tried different commands "option + command + R' with no luck.

    I tried what was provided on the link, but it is not working.
    I hold it down, before the gray screen and the chime, but it only prompts but the firmware password.
    I tried based on the specific order in the support document and at a random press and hold.
    No go any other thoughts?

  • Auto brightness of screen and keyboard backlight not working

    Basically, since I updated to OS X Lion, the auto brightness feature for the screen and keyboard hasnt been working, despite the fact I have it turned on
    Thanks in advance for your help

    Same problem here.  I initially thought the auto-brightness problem had been fixed in 10.7.3, but sadly it hasn't. The auto-brightness works when the Mac starts, but I find it loses control and fails after wake from sleep. 
    I have telephoned AppleCare several times but they are not aware of this bug.  They think a PRAM reset cures it, but it doesn't.  As soon as the machine goes to sleep then auto-brightness fails on wake.
    I have used the Apple Form to report the bug.  It might eventually get fixed if others would kindly report it as well please.  Here is the link:
    http://www.apple.com/feedback/macosx.html

Maybe you are looking for