Lock and Load X - Magenta Flash with 10.0.6

Hi, After upgrading to 10.0.6 and installing the latest Core Melt Lock and Load X plugin, I had a clip which was stablized, but a magenta flash appeared half way through the shot. If I remove the plugin from the clip it plays fine.
Has anyone else seen this?
Thanks

I have the same problem with Lock & Load on my system after upgrading to 10.0.6. Also Neat Video Reduce Noise-plugin have similar problem. Can´t find any way to fix the problem.....
Bjarne

Similar Messages

Hi, My iphone has locked me out and says iphone is disabled connect to itunes. but my itunes wont connect with my iphone. i've tried everything i can think of and my phone is still locked and i cant sync it with itunes. what else can i do??

Hi,
My iphone has locked me out and says iphone is disabled connect to itunes. but my itunes wont connect with my iphone. i've tried everything i can think of and my phone is still locked and i cant sync it with itunes. what else can i do??

While connected to iTunes, try...
http://support.apple.com/kb/HT1808

I got my iPhone 4S and I think I have a problem with it. Sound when locking and unlocking is quiet compared with other iPhone 4S. I compared it with others and really is a little quiet. Other people have confirmed it too. Other sounds may be better. No pr

I got my iPhone 4S and I think I have a problem with it. Sound when locking and unlocking is quiet compared with other iPhone 4S. I compared it with others and really is a little quiet. Other people have confirmed it too. Other sounds may be better. No problem tones, watching videos. This problem or is it something normal?

I have this problem too, but it is intermittent. Sometimes the lock/unlock volume will drop to barely-audible, even though in settings the volume slider hasn't changed. If I then move the volume slider, it fixes the problem and the lock sounds jump back to normal, but then later on the problem will happen again.

Updating and Loading a Matrix Row with Mix of DB and Non DB fields

Hi
I'm using SAPB1 2005 SP1 PL14 with B1DE 1.3
I have a matrix on a form that was generated by the UDO Form Generator. The Matrix contains data associated from a Document Lines table.
The underlying table and (therefor the matrix as well) only had 1 user field (column)
I've added a set of additional (read only) columns to the matrix together with supporting non db user datasources for each column. I've bound the new columns to the user datasources.
The new columns are only informational and should display data associated with the actual db field (column) in the matrix.
I require assistance / advice with 2 requirements:
<i>Requirement 1.
When loading the matrix, I'd like the non DB columns to be populated with data associated with the actual DB field.</i>
<i>Requirement 2.
When Adding / Updating the actual DB field in the matrix, I'd like the Non DB columns to be populated with the assocaited data.</i>
I've managed to get requirement 2 working by using a matrix onValidate Event. (not sure if this is the best approach?)
Any idea how I can achieve requirement 1 ?
Cheers,
Ben

Hi Trinidad,
Putting the additaional columns in the table will result in me storing redundant info in the specific table.
The values are already stored in other related tables and I'd just like to display them as additional info fields.
.Ben

Insert Image and Load Image by VC# with Oracle 9i Database.

I need save and load a Image to Database Oracle 9i, i use BLOB Datatype and VC#2003, i write code bellow:
Load image data.
m_Img is a parameter byte[], and :
this.openFile.ShowDialog(this);
string strFn=this.openFile.FileName;
this.pcPerson.Image=Image.FromFile(strFn);
FileStream fls;
fls=new FileStream(@strFn,FileMode.Open,FileAccess.Read);
m_Img=new byte[fls.Length];
fls.Read(m_Img,0,System.Convert.ToInt32(fls.Length));
fls.Close();
//Add Parameter
CnnOracle myBase = new CnnOracle();
string reqSQL = "SP_PERSON_UPDATE";
try
OracleConnection myConn = myBase.OpenConnection(myBase.cnxString);
OracleCommand myCommand = new OracleCommand(reqSQL,myConn);
myCommand.Parameters.Add(new System.Data.OracleClient.OracleParameter("Faxno", System.Data.OracleClient.OracleType.NVarChar, 20));
myCommand.Parameters["Faxno"].Value = myPerson.faxno;
myCommand.Parameters.Add(new System.Data.OracleClient.OracleParameter("Email", System.Data.OracleClient.OracleType.NVarChar, 20));
myCommand.Parameters["Email"].Value = myPerson.email;
myCommand.Parameters.Add(new System.Data.OracleClient.OracleParameter("Photo", System.Data.OracleClient.OracleType.Blob));
myCommand.Parameters["Photo"].Value = m_Img;
myCommand.CommandType = CommandType.StoredProcedure;
myCommand.ExecuteNonQuery();
myBase.CloseConnection(myConn);
catch(Exception myErr)
throw(new Exception(myErr.ToString() + reqSQL));
That code above don't run and have a error: "ORA-01460: unimplemented or unreasonable conversion requested\n",
but i clear these row:
myCommand.Parameters.Add(new System.Data.OracleClient.OracleParameter("Photo", System.Data.OracleClient.OracleType.Blob));
myCommand.Parameters["Photo"].Value = m_Img;
and modified StoreProcedure: clear parameter Photo, it run good
Why? Help me, Please.
Thank you very much.

Can you post your table structure?

Dv3z black screen with caps lock and numlock led lights flashing

dv3z boot with black screen and (screen) flashes every few seconds, cap and num lock led lights flashes every 2 seonds as well. It boots eventually but takes forever.

Hi,
I your notebook still under warranty? If it is, you will need to contact HP and arrange to have the notebook repaired under warranty.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
If you're out of warranty, I would suggest getting an estimate ( and a confirmation of the diagnosis ) from a local computer repair shop. If the actual processor chip is faulty, this is far easier to replace than say a fault with the graphics chip ( which usually means a new Motherboard ) and so may well be worth the expense.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Combo box visible and loaded but cant interact with it

I have two swf files onSiteSearch and onSiteReg. Both work as
expected when used alone but when onSiteReg is loaded from onSite
Search the comboBox on onSiteReg cannot be interacted with. It is
visible and has the correct data in it but there is no ability to
drop down the comboBox. I have tried many suggestions I have found
here including making sure there is an instance of the comboBox in
the onSiteSearch but nothing seems to change.
The onSiteSearch brings up a dataGrid and when a list item
from the grid is click it loads the onSiteReg (see code below).
Everything works as it should including checkBoxs and actionScript
but I can change the selected choice in the comboBox.
Thanks in Advance for any insight and/or help.
var dgListener:Object = new Object();
dgListener.cellPress = function(event) {
txtTalentEventID.text =
dgResults.getItemAt(event.itemIndex).TalentEventID;
_global.thisTalentEventID =
dgResults.getItemAt(event.itemIndex).TalentEventID;
loadMovie("onSiteReg.swf",_level0);
dgResults.addEventListener("cellPress",dgListener);

Ok. I changed the code to use loadMovieNum like this:
var dgListener:Object = new Object();
dgListener.cellPress = function(event) {
txtTalentEventID.text =
dgResults.getItemAt(event.itemIndex).TalentEventID;
_global.thisTalentEventID =
dgResults.getItemAt(event.itemIndex).TalentEventID;
//loadMovie("onSiteReg.swf",_level0);
loadMovieNum("onSiteReg.swf", 2);
dgResults.addEventListener("cellPress",dgListener);
and now the onSiteReg comboBox works fine but now i have both
movies on the screen at the same time and can't figure out how to
get rid of onSiteSearch.
Yes, I am new to this flash stuff. Have been doing CF since
v2.0 but flash is kicking my ***!

My ipad is locked and it asking to connect with itunes

i have wrongly entered password in my i pad and now it is locked. it is asking to connect to i tunes. but i dont have that computer now.
how can i enable it again

You need a computer. Use a friends computer.
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Burn Folder locked and need to Burn CD with yext Docs

WEll my G4 Power Mac Digital Audio (2001)not let me burn a CD with a text Doc that went into the burn folder which I can not get rid of and I am the administrator because it is locked. How can I get rid of the Burn Folder, empty its contents, and just trash it?

well it did just jump into the trash, but still I would like to burn a text doc to disc

TS3992 my ipad mini is stuck with the message on the screen 'this ipad hasn't been backed up in 5 weeks. Backups happen when this ipad is plugged in, locked, and connected to Wi-Fi' with OK button. If you click button nothing happens and I can't move an

Ipad mini is stuck with the message 'this ipad hasn't been backed up in 5 weeks....' if you click the OK button nothing happens, cannot get rid of the message and cannot even power off b/c the message is on the screen.
The ipad had not been backed up b/c it kept saying not enough storage available

A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 15-20 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

HT1349 after updating the OS today on my iphone 4S I activated the lock my phone with the password. Now when I truned on the phone it is locked and can not unlock it with the password.

after updating the OS on my iphone 4S i activated the lock my phone and now I can not unlock it it put the password in but it does not work how can I unlock it?

Hello son29660,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Best of luck,
Mario

Pavilion dv4-1275mx notebook - once-flashing leds @ caps lock and scroll keys @ start-up

My HP Pavilion dv4-1275mx notebook runs Windows Vista Home Premium service pack 1 for 64x-based systems.
Recently, when I turn it on, the led lights @ the caps lock and scroll keys repeatedly flash once.
I'm not sure what, if anything, happened prior to this starting. It's possible that there was a power surge when it was shut off, or it may be related to doing a McAfee virus scan or installing the latest version of a software, e.g., Adobe Reader.
I was able to use my System Recovery disks to reinstall the Vista software, thinking this might "kickstart" my computer into working, e.g., as part of the restart process. After the reinstallation, I was able to use my computer, although the led lights continued to flash. However, once I shut down my computer, I have been unable to restart it. The leds continue to flash upon start-up, and I have not been successful in again reinstalling the Vista software. (I thought if could get my computer to work again that way, it might stay accessible if I used hiberate mode instead of shutting it down.)
The computer's about 4-1/2 years old. The screen has a short of some kind (only turning on when the screen is low to the keyboard, so I use an external monitor.

Try the steps in the following weblink:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00372748
If the issue persists, please read the following document, understand the LED blink code, identify the root cause and try troubleshooting appropriately:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCach...
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Saving and Loading specific properties of an Image

Hey everyone. I'm currently in the process of developing a game which allows you to customize the color (hue) of your character via a slider. What I would like to happen is: Upon clicking either Accept or Play, it will save the current hue of the image, navigating back to that page will load what was previously saved (hue), as well as when starting the game, it will replace the standard graphic with the previously saved image.
Below is the code I have right now that pertains to the image with a basic non-functioning properly saving and loading code:
import flash.events.KeyboardEvent;
// open a local shared object called "myStuff", if there is no such object - create a new one
var savedstuff:SharedObject = SharedObject.getLocal("myStuff");
Accept.addEventListener(MouseEvent.CLICK, SaveData);
PlayBTN.addEventListener(MouseEvent.CLICK, LoadData);
function SaveData(MouseEvent){
           savedstuff.data.username = Sliders.Dino.MovieClip // changes var username in sharedobject
           savedstuff.flush(); // saves data on hard drive
function LoadData(event: MouseEvent)
           if(savedstuff.size>0){ // checks if there is something saved
           Sliders.Dino.MovieClip = savedstuff.data.username} // change field text to username variable
// if something was saved before, show it on start
if(savedstuff.size>0){
Sliders.Dino.MovieClip = savedstuff.data.username}
What I have above is only saving the actual image, which is inside a movie clip names Sliders.
Below is the Class I am using that associates with the slider that changes the hue of "Dino".
package
          import flash.display.Sprite;
          import fl.motion.AdjustColor;
          import flash.filters.ColorMatrixFilter;
          import fl.events.SliderEvent;
          public class Main extends Sprite
                    private var color:AdjustColor = new AdjustColor();
                    private var filter:ColorMatrixFilter;
                    public function Main():void
                              /* Required to create initial Matrix */
                              color.brightness = 0;
                              color.contrast = 0;
                              color.hue = 0;
                              color.saturation = 0;
                              /* Add Listeners function */
                              addListeners();
                    private final function addListeners():void
                              colorPanel.hueSL.addEventListener(SliderEvent.CHANGE, adjustHue);
                    private final function adjustHue(e:SliderEvent):void
                              color.hue = e.target.value;
                              update();
                    private final function update():void
                              filter = new ColorMatrixFilter(color.CalculateFinalFlatArray());
                              Dino.filters = [filter];
Overall what I'm asking for is: How do I get it to save the current hue of an image by clicking a button, and then having that previously saved image be loaded upon reloading or clicking a button? To me, it doesn't seem like it should be too hard, but for some reason I can not grasp it.
Thanks in advance for reading this and for any assistance you have to offer!

This is the Class that you told me to use:
package
          import flash.display.Sprite;
          import fl.motion.AdjustColor;
          import flash.filters.ColorMatrixFilter;
          import fl.events.SliderEvent;
          import flash.net.SharedObject;
          public class Main extends Sprite
                    private var color:AdjustColor = new AdjustColor();
                    private var filter:ColorMatrixFilter;
                    private var so:SharedObject;
                    public function Main():void
                              color.brightness = 0;
                              color.contrast = 0;
                              color.saturation = 0;
                              so = SharedObject.getLocal("myStuff");
                              if (so.data.hue)
                                        color.hue = so.data.hue;
                              else
                                        color.hue = 0;
                              update();
                              addListeners();
                    private final function addListeners():void
                              colorPanel.hueSL.addEventListener(SliderEvent.CHANGE, adjustHue);
                    private final function adjustHue(e:SliderEvent):void
                              color.hue = e.target.value;
                              so.data.hue = color.hue;
                              so.flush();
                              update();
                    private final function update():void
                              filter = new ColorMatrixFilter(color.CalculateFinalFlatArray());
                              Dino.filters = [filter];
And this is the FLA Code:
import flash.events.KeyboardEvent;
// open a local shared object called "myStuff", if there is no such object - create a new one
var savedstuff:SharedObject = SharedObject.getLocal("myStuff");
Accept.addEventListener(MouseEvent.CLICK, SaveData);
PlayBTN.addEventListener(MouseEvent.CLICK, LoadData);
function SaveData(MouseEvent)
          savedstuff.data.username = Sliders.Dino.MovieClip;// changes var username in sharedobject
          savedstuff.flush();
          // saves data on hard drive;
function LoadData(event: MouseEvent)
          if (savedstuff.size > 0)
          {// checks if there is something saved
                    Sliders.Dino.MovieClip = savedstuff.data.username;
          }// change field text to username variable
// if something was saved before, show it on start
if (savedstuff.size > 0)
          Sliders.Dino.MovieClip = savedstuff.data.username;

Essbase - Is there a way to tell who locked and sent a certain data point?

Hi Experts!
Is there a way in Essbase (ie. query log) that can tell the administrators who locked and sent a certain data point? Example, who was the last person who loaded the Plan for Revenues for January 2010 for the Northeast location.
Thank you!

user9952742 wrote:
I was able to successfully see the 2 files (.atx and .alg) via SSAUDIT. However, is there a way where we can see the user, time he locked and sent the data, combined with the data he locked and sent? Those files are separated so you can't really see by whom and when the data was sent. In Dodeca, we evaluate the send operations on our server and store an audit log in a relational database so you can see the user, workstation, date, server, application, database, old value and new value, along with the datapoint information, very easily. I can show you that functionality in a webcast.
http://www.appliedolap.com/products/dodeca
Tim Tow
Applied OLAP, Inc

Compiling (in memory) and Loading classes on fly

Hiya,
I have following classes:
public class Vehicle {Protected Sting reg;}
public class Car extends Vehicle
(public void print(){System.out.println(reg);}}
These classes (or different ones) are stored in one text file. The program must read these files then compile and load them dynamically in memory.
The link below authored by DCHSW deals with one class only (compile and loading) however it fails with more then one class particularly when it is subclassed.
http://forum.java.sun.com/thread.jsp?thread=347467&forum=4&message=1439418
How can we get the code mentioned at link above to compile (in memory) and load subclasses like the ones mentioned above.
Thanks
Derik

Hiya,
I have following classes:
public class Vehicle {Protected Sting reg;}
public class Car extends Vehicle
(public void print(){System.out.println(reg);}}
These classes (or different ones) are stored in one
text file. The program must read these files then
compile and load them dynamically in memory.
The link below authored by DCHSW deals with one class
only (compile and loading) however it fails with more
then one class particularly when it is subclassed.
Read the following post for full description of the problem
http://forum.java.sun.com/thread.jsp?forum=4&thread=417724
Any ideas?
Thanks
Derik
http://forum.java.sun.com/thread.jsp?thread=347467&foru
=4&message=1439418
How can we get the code mentioned at link above to
compile (in memory) and load subclasses like the ones
mentioned above.
Thanks
Derik

Lock and Load X - Magenta Flash with 10.0.6

Similar Messages

Maybe you are looking for