Lock Box Problem

Hi
I am trying to configure lockbox. I have done the following
a. Got the bank to provide me with the flat file format that they are using .
b. Wrote a .ctl file and saved it in AR_TOP/bin
c. Cofigured the Transmission format according to the .ctl and bank flat file format
Everything went smooth until this error started bothering..
a.
Username:SQL*Loader-350: Syntax error at line 1.
Illegal combination of non-alphanumeric characters
{\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fnil\fcharset0
^
I have done all types of debugging possible.
I am totally lost to figure out a solution.
b.
It says my lockbox id is null. I am clueless what this is, where do I use it?
If somebody could direct me in the right direction i would greatly appreciate it
Thanks
Keshav

You suggested by earlier node you can run the file through the Dos2unix utility, which filters out the control-Ms, leaving the UNIX text file standard (control J)
The Unix2dos utility takes a unix text file, and ADDs control-Ms (carriage return) to match the DOS text file standard (control M, control J).
Options 2
Put your in a file named win2aix, make it executable and execute it
like so, Example: win2unix myCfile.c
#!/bin/ksh
awk '{ sub("\r$", ""); print }' $1 > temp
mv temp $1
hope this helps

Similar Messages

Lock Box Uploading Issue

Hi,
When i upload BAI file into Lock Box...I am getting the below error in FBL2 transaction.
Accounts receivable posting Error: (F5 102) Customer * is not defined in company code 1000
After that when i see in to FBL1,I am getting the below error.
Payment Advise item doesnot exist
Payment advice 010000007500001 does not exist for account 9372 1000
Message no. FA006
Kindly help me what is the problem and why i am not able to upload it successfully?
Thanks
Kishore

I am experiencing the same issue.
I am wondering how you went about in correcting this issue
Thanks

Lock Box - item not getting cleared

Hi,
I m testing the lockbox process with the lock box file available online.
I could be able to import the file and document got created. But i have some doubts, please try to reply for the same.
1) payment advice got generated but the customer open item is still not cleared? do we need to process that further? the check status is applied and G/L document got posted.
2) I think we can also process lock box posting through Idoc, what is the process flow? would you pease eloberate on this IDOC process for lockbox.
3) I am not able to understand the posting done (without clearing the customer open item). Both debit and credit posted to a bank account. would you please eloberate the posting done while lockbox processing?
Please let me know if more information required.
Regards,

Hi,
If you are able to load the lockbox file then customer items shall be cleared. Please check the posting rule config and clearing accounts maintained for lockbox.
Thanks,
Sachin

How do I resolve LOCKED DISKS problem ? NO ACCESS ANYMORE !

Hello everybody,
I've looked carefully where to post this topic,
and I hope it's the right place here
(I have already been warned not to post the same questions in different places).
I have actually 2 internal volumes locked, 2 external Firewire volumes locked and 2 USB external volumes locked. I'm talking about *5,7 To* with *NO ACCESS* anymore.
It happened suddenly, and I was working on Snow Leopard 10.6.3 internal drive. This volume is the *only one* that has NOT been locked, but I lost a lot of applications, documents and so on on it.
Each of the locked volumes I am talking about shows,
in *Sharing & Permissions* (Get Info window),
the same Privileges :
— everyone : Custom
— admin : Custom
— olcha (Me) : Custom
— staff : Custom
— everyone (again) : Custom
You'll notice that "System" is not there (should be there with R+W),
and "admin" should have also R+W privilege.
I don't know why "staff" is here (perhaps, one day, somebody will explain to me the difference between : wheel, staff and admin).
I also don't know why "everyone" is there two times.
If I unlock the padlock (bottom right) with my password, I can only
check or uncheck the "Ignore ownership on this volume" square (bottom left).
Doing this (apparently) offers *no interest at all* to solve the problem
(and what does this function produce, when activated or not ?).
I can't *absolutely not* :
• Change *any privilege* of any of the 5 items ;
• Remove (with "-") any of these items ;
• Add a line (for example "System" or "wheel", why not ?)
but nothing new is shown after "+" making.
• The wheel (on the right of "+" and "-") shows only "revert changes" in grey.
I phoned immediately last thursday Apple Assistance,
and I am in contact with a Level 2 Apple Adviser who gave me his e-mail.
I sent him two messages, but he replied me that perhaps MONDAY
he could find the time to call me.
Now, first, please tell me if you have any idea or solution !
Thank you very much in advance.
Secondly, I have reflected on the solving,
and would like to know what you think about what follows :
You know that, in Disk Utility, you can erase a disk or partition.
If, in "Security Options…", I choose "Don't Erase Data", and then "Erase…" :
1) Sharing and Permissions will be changed and become (reset to) correct ;
2) It's said, in "Security Options…",
that "many commonly available disk recovery applications can restore that data".
I would be very glad that you indicate me :
1) the best application to use for that recovery ;
2) I already own "Drive Genius 3.0", "Data Rescue 3.0.2" and
(I think it's the best after a try on an internal 30 Go partition)
"Stellar Phoenix Macintosh Data Recovery".
Thank you in advance for your answers and advices,
With my kind regards
Olivier Herrbach
[email protected]
PS : Dear Forum Webmaster,
I would like to know :
1) if I posted this topic in the right place ;
2) if you allow me to post it elsewhere (and in this case, where ?) ;
3) is it possible to paste images in messages,
and, if yes, which format is needed (TIFF, png, jpeg …)
Thank you very much
Olivier Herrbach

Dear ChazBowie,
Here is the solution I've found for *LOCKED DISKS* problem.
I'll respond the shorter I can, avoiding for the moment to talk about the complicated solutions
that Apple gave to me, which involved volume by volume (only one each time) intervention, and were working by, each time, entering one line, password, then another line in Terminal. I will communicate these instructions later, but they do not need to be publicated here with urgence.
I found two little free softwares that can modify *ALL Privileges* in Sharing and Permissions, *on ANYTHING*. You will have to be careful using them, as they even allow to act as "Root" administrator.
I'd also like everyone to *donate anything* to these helpful developers, and I'd be very pleased to have *your feedback and results*.
••• 1) — *BatChmod 1.6.2* (162), written by a compatriot, Renaud Boisjoly.
E-mail (if you have doubts or questions) : [email protected]
Free software downloading site : *http://www.macchampion.com/arbysoft*
(excuse me, but I don't know how to make a link here).
••• 2) — *FileXaminer 2.7*, recommended by Renaud himself.
Dear ChazBowie,
Here is the solution I've found for *LOCKED DISKS* problem.
I'll respond the shorter I can, avoiding for the moment to talk about the complicated solutions
that Apple gave to me, which involved volume by volume (only one each time) intervention, and were working by, each time, entering one line, password, then another line in Terminal. I will communicate these instructions later, but they do not need to be publicated here with urgence.
I found two little free softwares that can modify *ALL Privileges* in Sharing and Permissions, *on ANYTHING*. You will have to be careful using them, as they even allow to act as "Root" administrator.
I'd also like everyone to *donate anything* to these helpful developers, and I'd be very pleased to have *your feedback and results*.
••• 1) — *BatChmod 1.6.2* (162), written by a compatriot, Renaud Boisjoly.
E-mail (if you have doubts or questions) : [email protected]
Free software downloading site : Gideon Softworks : *http://www.gideonsoftworks.com/*
I won't copy here the texts that are on both sites, but it's very instructive.
Remember that the applications don't only work on files and folders,
*but also on disks attributes*.
You'll also have some work to do (I don't remember, perhaps not), by going in the Get Info windows
and changing privileges to the correct ones, that means you must know
(I'm not sure, verify please) what privileges are to be set for a volume
(YOU WILL HAVE ACCESS TO THEM, AND CHANGES YOU MAKE WON'T BE RESET TO "CUSTOM").
Does anybody know something about the "Ignore ownership on this volume" checkbox ?
*I always uncheck it*.
I would also like very much to know the differences between the two-headed iconed groups :
"staff", "wheel" and "admin", and IN THE END know *WHERE are the rules* you have to observe
when doing changes in privileges (for example, I don't want to give my password to copy something in Users folder, nor "MyName" folder. I've changed that without, I hope, having created any dysfunction).
Please tell me if you know anything about these 2 subjects above.
I'm very glad if my informations have been useful/helpful.
With my kind regards,
Olivier Herrbach

HI SAP experts, I want learn SAP BANK LOCK BOX CONFIGARATION

Hi
SAP experts
I would like to Learn SAP bank Module , Specially for Bank lock Box Configaration . So Kindly give the Information which website
it has been provide the Material and that would be Free of cost
thank YOu
Ranamka

Hi
Please check the below link it might be useful for you
http://srilogix.com/casesWhitepapers/Lockbox%20Process.pdf
Thanks & Regards
Phaneendra

Lock Box not clearing

Hello all,
my lock box status is not being processed in FBLB1, its showing the status as not processed even and the document number is not being populated in FLb1. The customer open item is being cleared and i am getting a clearing document but for some reason its not clearing in FLB1.
Please help
Regards,
Kimi

problem with the user exit

Real Estate Lock Box Key

I have owned three Palms and now on my 4th.
The very first one,second one and third was able to be integrated with the software/programming to be installed into my phone for the ability to open realtor lock boxes. ALL Palms have infrared so once installed at my local board of realtors I am good to go and I simply access the program on my Palm point the phone at the lock box and it opens... among other functions but this is the one most used.
Now I have just purchased a new Palm Pre and ONCE AGAIN I am told by GE Security that the NEW Palm will not function as a lockbox because of it's operating system. IS THIS TRUE ARE ARE THEY TELLING ME THE SAME THING THEY HAVE DONE IN THE PAST BECAUSE OF EITHER SOMETHING BETWEEN THE TWO COMPANIES IS LACKING IN GETTING THE PRODUCT READY OR IS IT TRUE THIS NEW PRE WILL NEVER BE COMPATIBLE FOR LOCK BOX KEY USAGE?
Need help... don't think this is a question for tech support in India!

Currently, realtors can use Blackberries to access supra lockboxes by using bluetooth technology and a fob which converts the bluetooth signal to an infrared signal. Will we soon have this capability with Palm Pre? I want to upgrade from my Palm Centro to the Palm Pre Plus, but may have to go with a Blackberry instead. Any information you can provide will be greatly appreciated!
This post desribes the situation well: https://developer.palm.com/distribution/viewtopic.php?f=11&t=364&view=previous
Consider this another request to enable the Pre for compatibility with the GE Supra eKey. For years Realtors have utilized the Treos as their Smartphone of choice due to its ability to unlock the lockboxes that hold the keys to the homes we show. Currently no such application is available for the Pre because the SDK stifles access to the Bluetooth interface that is needed to communicate with the lockboxes. Here is what the eKey people say regarding the issue:
"Unfortunately at this time support for the Palm Pre is not possible. The Palm Pre is the first device to use Palm's new "WebOS", and the Software Development Kit (or SDK) available at this time does not include adequate access to the Bluetooth interface on the phone. Because of this, and because the Palm Pre does not have an infrared port on it, we will not be able to certify it as an eKEY device. Hopefully in a future version of the SDK, the required Bluetooth Access will be made available to our programmers so that we can support this device."
Just about every Realtor I know uses a Palm phone, but now people who want to update and upgrade their phones are jumping ship to Blackberry due to this single issue. I'm sure that I don't have to remind you that Brand Loyalty is incredibly hard to earn, and everyday that the Pre does not have this function you will lose valuable customers and an entire niche of users.
I know that I am not the first to make this plea, but of all the research I have done, I have yet to find a response or even an acknowledgment from Palm. Please advise.

Lock Box Reason Code.

Hi Experts,
I am getting one issue in lock box, If Suppose customer has invoice of $ 1000, he is eligible for discount of $ 50 so he should pay net amount $ 950. But customer is paying full amount without knowing that he is eligible for discount i.e $ 1000. so system is crediting back $ 50 to the customer(returning back the $ 50 to customer).
In this case i want system should accept amount $1000 and system should not credit $ 50 to customer(system should not pay back to customer $ 50), instead of this system should transfer the balance to GL account by using the reason code.
Note : we are using BAI2 format for lockbox.
Please be advised what should i do in this case if i want to accept the full amount from the customer without doing the credit to him and i want to transfer the amount to GL account by using reason code in BAI2 format.
Regards,
Sam.
Edited by: samiuk on Nov 11, 2011 4:23 PM

Yes you can.
Customer and User tolerance limits, payment advice tolerance limits and reason codes
When an incoming cash payment does not exactly pay the referenced open item(s), then the system will not be able to perform clearing without creating residual items back on the account - except when you establish tolerance limits to allow posting with a write-off of acceptable payment difference amounts.
Reason code settings are used for description and reporting purposes, generation of specific customer correspondence letters (automatic system generation whenever this reason code is assigned to a document), and difference item write-off/dispute status assignment.

Lock box jobs getting cancelled

Hello All,
I am new to lockbox processing. I am into lock box support project now. Recently lot of lock box jobs are getting cancelled. While I am going through job log it says that " Payment advice 01706525923 does not exist for account 10001009 0110 ". Similar error showing for few other jobs. Can you please anybody through some light on this regarding how to investigate this error?
Thank you,
Santosh

When ever you get such kind of message then it says that it has found the customer and not found the document to post.
Now when you got to T.code FLB1. you can see that in "on account" status.
Now through lockbox post processing you have to post/clear the document (thru F.04) to make the document to "Applied" status.
Assign points if useful.

Lock Box - Cleared items (Urgent please)

Hi all
Can anyone please help me getting a report, to get the below information.
1.How many customer invoices have been cleared through Lock Box Clearing program -- I wanted to findout how many customers have been cleared automatically (How can I findout this information - Tables/Field)
2. How many customer invoices were not able to be cleared due to tolerance error through Lock Box clearing program
Please help me in getting these detials
Thanks
Krishna

Hello,
1.How many customer invoices have been cleared through Lock Box Clearing program -- I wanted to findout how many customers have been cleared automatically (How can I findout this information - Tables/Field)
You can sort this in table BSAD based on Doc type...Idenity whether your document posted via Lockbox program has unique ID...else you can identify from the table BKPF header records <fields TCODE & BLART>.
Hope this helps
Rgds
Rajendra

I backed up my phone and now all of my lock box info and music is gone

I backed up my phone and now all of my lock box info and music is gone

To fix this go to Settings>Messages>Send & Receive and do one of the following:
Either uncheck the email address shown under "You can be reached by iMessage at" on both phones; or
Because you are both using the same Apple ID for iMessage. To prevent this, on one of the phones go to Settings>Messages>Send & Receive, tap the Apple ID, sign out, then sign in with a different Apple ID. Note: you can continue to share an Apple ID for purchasing; it does not need to be the same as the ID you use for iMessage, FaceTime, iCloud and other services.
Also, to prevent merging your calendars and contacts if you are syncing these to the same iCloud account, be sure to set up separate iCloud accounts on each phone with separated IDs.

Payment Advise error while uploading Lock box

Hi,
i am getting the below error in FBL1 transaction code. I am able to upload the lock box in FBL2 transaction with Appllied status. After that when i execute FBL1 transaction i am getting the below error related to Payment Advise. Kindly help me to fix this issue...
Payment advice 010000000700001 does not exist for account 237059 1000
Thanks
Kishore

Once the incoming payment is applied and the invoice is cleared the system would delete the payment advice immediately and you would get this error from FLB1, this is standard.

Row lock contention problem on Inventory Management

Hi
My client is product based company and have e-Commerce (online Sale Order) application using Oracle database 10.2.0.5 & Web application deployed on WLS. Client have ~ 90 Warehouse country wide and ~ 200 Products (Items). Each product stock for each warehouse is maintained in Inventory Table (INV_BALANCE) which get updated for each order and their sale's products. We are using NO WAIT function to acquire lock on row to update stock balance. Last few months, client business is growing very fast and during Promotional Events (EXPO), they have sales of ~ 75K orders (~ 250K Items) within 2-3 days which start causing row lock contention problem on INV_BALANCE table. We are seeing lots of "Row Lock Wait" and "enq: TX - row lock contention" event which cause ORA-00060: Deadlock detected and we need to eventually clear blocking sessions or everything just choked.
select statistic_name,value from sys.v_$segment_statistics where object_name = 'INV_BALANCE'
STATISTIC_NAME                                                                                                                        VALUE
logical reads                                                                                                                                12423072
buffer busy waits                                                                                                                           3895
db block changes                                                                                                                         3516768
physical reads                                                                                                                               957
physical writes                                                                                                                            12197
row lock waits                                                                                                                             49909
space used                                                                                                                                -52921
Deadlock graph:
                       ---------Blocker(s)-------- ---------Waiter(s)---------
Resource Name          process session holds waits process session holds waits
TX-00880017-00002584       321    1675     X            110    1445           X
TX-00b60008-00000741       110    1445     X            337    2158           X
TX-0148000b-0000009e       337    2158     X            378    1525           X
TX-01d50015-0000006f       378    1525     X            363    1842           X
TX-02290012-00000070       363    1842     X            267    1798           X
TX-024a0026-0000006e       267    1798     X            364    2084           X
TX-020a0004-0000006f       364    2084     X            135    2113           X
TX-01dc001f-00000070       135    2113     X            129    1586           X
session 1675: DID 0001-0141-000001CA    session 1445: DID 0001-006E-00000202
session 1445: DID 0001-006E-00000202    session 2158: DID 0001-0151-0000026B
session 2158: DID 0001-0151-0000026B    session 1525: DID 0001-017A-00000167
session 1525: DID 0001-017A-00000167    session 1842: DID 0001-016B-000002B4
session 1842: DID 0001-016B-000002B4    session 1798: DID 0001-010B-000001F1
Rows waited on:
Session 1445: obj - rowid = 0001AE0E - AAAlK8AAHAAD7rMABY
(dictionary objn - 110094, file - 7, block - 1030860, slot - 88)
Session 2158: obj - rowid = 0001AE0E - AAAlK8AAHAAD7rMACD
(dictionary objn - 110094, file - 7, block - 1030860, slot - 131)
Session 1525: obj - rowid = 0001AE0E - AAAlK8AAHAAD7rOAB2
(dictionary objn - 110094, file - 7, block - 1030862, slot - 118)
Information on the OTHER waiting sessions:
Session 1445:
sid: 1445 ser: 37 audsid: 38316795 user: 69/<none>
            program: JDBC Thin Client
application name: JDBC Thin Client, hash value=2546894660
Current SQL Statement:
SELECT ROWID, NVL(QTY_PEND,0)+NVL(:B3 ,0) FROM INV_BALANCE WHERE WHS_ID = :B2 AND STOCK_ID = :B1 FOR UPDATE OF QTY_PEND WAIT 10
Please help me on following
Q1: How can we reduce the "row lock Contention" on INV_BALANCE, all possible ways & best practices?
Q2: How can we change the design to not have "row lock Contention" at all?
Appreciate your help
Thanks
Amit Garg
www.otnblogs.com

Hi Amit!
I saw you are using FOR UPDATE in your query.
If you want reduce row locks, then you not must use FOR UPDATE.
As you know, FOR UPDATE is locking rows.
Regards
Mahir M. Quluzade

Lock Box file format

Hi All,
I need help on lock box upload file format.I created a test file using bank layout & FLB* structure tables and put a test data for a customer.and tried to process it in FLB2 using pc upload but system didnt select the customer open items.
The file contains details for Record type 1,2,4,5,6,7,8,9.and I dont know what else need to do ,could anyone please provide any guidance on file format?.Thanks
100YPCCDESTINYPCCORIGIN1106221714
2YPCCDESTINYPCCORIGIN000000000040008000801
50010001234567110622YPCCDESTINYPCCORIGIN
6001001000012614407100001300091524660000055555
400100160195590023784
700100012345671106220010000126144
8000000123456711062200010000126144
9000000
thats the file I created but not working.
Regards
Shaun

Hi,
Please refer this links:
how to create Lockbox test file?
http://wiki.sdn.sap.com/wiki/display/ERPFI/ConceptofLockbox
Regards,
Pramitha.

Lock Box to prevent Apple TV Theft

I need to set up an Apple TV in a high foot traffic environment, and to my dismay, i have found that the Apple TV has no Kensington Lock port. Has anyone been in a similar situation? I need to find a box that allows me to feed the power, ethernet, and HDMI cable through it, as well as allow use of the IR remote port. WiFi is not of concern to me.
Any help is greatly appreciated.

Even cheaper than the ClearPC Lock Box is Maclock's security mount found here ---> http://www.maclocks.com/appletv-mount-apple-tv-security-mount.html
It looks sleek, looks even more security than a clear box, and protects your cables as well! All for $49.95!

Lock Box Problem

Similar Messages

Maybe you are looking for