Lock button issue after update

So I updated my iPhone 5 to the 7.0.2 update this past Sunday and now my lock botton is not responding when I press it. I have to hit it a few times to get it to respond now.
It is NOT a hardware issue since I did not have that issue since ownership. It only started with this issue after I did the update to the 7.0.2 software. 7.0 it was completely fine. (It was an OTA update from 7.0 to 7.0.2)
I have not done the, "erase settings and reset" yet so everything can be reinstalled. But I am wondering if anyone has come across this issue and found a solution without doing the factory reset.

Just quickly pointing out that you said "It is NOT a hardware issue", yet, you post this under "iPhone Hardware". Nice!
Check for any and all debrie that could cause such a thing to happen. Other than that, best bet is to backup via iTunes AND iCloud, then do a full restore via iTunes.
Good luck!

Similar Messages

My iPad frequently locks up, even after updating to iOS 7.1. When it locks up it's nonresponsive to the home button and the only remedy is to force a shut down and reboot. Help!

My iPad frequently locks up, even after updating to iOS 7.1. When it locks up it's nonresponsive to the home button and the only remedy is to force a shut down and reboot. Help!

DEVICE NOT RECOGNISED IN ITUNES
If you have connected your device to your computer and it does not appear in the side bar in iTunes then for Windows computers read http://support.apple.com/kb/TS1538 or if you have a MAC then read http://support.apple.com/kb/ts1591 for troubleshooting steps.

Syncing issues after updating to 10.3.1.55

After upgrading to itunes 10.3.1.55, today, it no longer recognizes my iPhone 4. I plug it in, the iPhone makes its normal syncing noice. I get a prompt, like always about it recognizing the camera and how i want to handle it. I cancel it, as usual, and then it never shows up in iTunes. I close itunes, connect my phone and it does not start itunes as it normally should. No error messages, just no response. Can anyone help with ideas?

I had the same issue, after updating to 10.3.1.55 it would error out saying something along the lines of not being able to read the catalog or something. I think the error even states do a restore to fix it. Last night that is what I did, clicked restore and then had it transfer all my items back. I'm glad I had just synced my phone prior to the update so the restore was really current.

My ipad is locked and disabled after updating to iso 7. I never had a password on it.

my ipad is locked and disabled after updating to iso 7. I never had a password on it.

Even though you never had a passcode enabled, try the help here > iOS: Forgotten passcode or device disabled after entering wrong passcode

Firewire epson R2400 issues after update to 10.8.4 will not print causes system shutdown

anyone had similar issue and or a fix?

issues after update
Download and install new drivers from the Epson site for your printer model.
Epson Stylus Photo R2400, Drivers & Downloads - Technical Support - Epson America, Inc.

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

Safari, App Store Issues after updating to 10.7.2

I have been running my imac that came preinstalled with Lion
I am having this wierd issue after updating to 10.7.2 recently
When i run Safari, App Store, Itunes, i can see its loading..
but after 2 hours its still loading.
It just seems to be stuck and its not the Beach ball.. So i dont think it hanged
Its not a network issue as well, since i am typing this on Firefox, which is running perfectly
What could be the reason?

I'm having the same issue on my iMac. I've also noticed the rear of the left side is getting a lot hotter than normal.
I downloaded (from: http://support.apple.com/kb/DL1459) the update again and reinstalled it. But nothing's changed. Is there anything else I can try?
Scott

Issues after updating iPhone3GS to iOS5 on TIM cellular data network (Italy)

Hi everyone
I have issues after updating iPhone3GS to iOS5 on TIM cellular data network.
After installing iOS5 I had to switch from apn ibox.tim.it to wap.tim.it
Since then the phone is unusable for any internet activity that is barely "data demanding" (e.g facebook app take literaly hours to update), everyting requires way to much time... the iPhone is not an iPhone anymore... it's worse than my blackberry with just GPRS on it.
TIM technical support suggested me to switch back on apn ibox.tim.it, but then I would not be able to use internet tethering anymore (they say because of Apple iOS5) ... to bad I need internet tethering for work.
I am seriously thinking to switch ISP or phone.
Anyone did experience same problem / found a solution?

Hi Raia.D,
Welcome to the Support Communities!
The first thing I would suggest is to restart your iPhone. Then tap the Settings app, and you should see Cellular listed on the main settings screen. You should see Airplane Mode, Wi-Fi, Bluetooth, and then Cellular.
Here are some additional troubleshooting steps to try:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
- Judy

IPhone 5 Power button issues after recent update.

After this most recent update, my power button is not working as it normally does. It takes two or three attempts to turn the phone off and more than once to turn it. Sometimes it turns on and immediately turns off. This is happening only after this update.

Yes 7.1.2 I had a 7.1 backup, and no issues with that... but then I did a clean DL of 7.1.2 and once again with NO apps on the iphone power button issues... as mentioned. So it is not the apps, nor songs, nor anything else...just 7.1.2 I am now running 7.1 no issues.

IMac 27" wifi issue after update to OS X 10.7.4

Hi all,
i can't access to wifi after update to OS X 10.7.4.
Anybody has remedy to this problem?
Is this software or hardware related problem?
Hope to get a reply soon.
Thanks.

Hi Thomas, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
Or whatever Interface you use.

"No Service" issue after updating iOS 8.1

My iPhone 5 is really giving trouble after updating all iOS 8.01, iOS 8.02 & iOS 8.1. Cellular network is come to halt, "No Service" issue is regular and i am not able to use my iPhone 5 as phone.
Please help me out else i have to switch to some other phone.

I have similar problem but with a 6:   bought new iPhone 6 four days ago, phone and 3G signal were fine in UK from Sat to Mon.   Yesterday, I traveled to Belgium and have had 'no service' problem since.   I am carrying a Nokia feature phone which is locked on to local network and working fine.
If I power off the iPhone and power on, it comes back and joins the network.   Five or so minutes later, it has dropped the network and will not re-attach if I put in/out of flight mode; needs power reset, and then drops again.
It is conceivable that this is a carrier issue but given that Nokia is fine and all the postings that I'm finding on various discussion sites, then I feel that it is an iOS issue.   I'm booked in to visit the Apple Store at the weekend.   My previous iPhone 4S was running iOS 7 and had no such problems.
So, carrying an expensive brick at the moment and hoping for an iOS update that will resolve this.

Lion - TM issues after update

After updating to LION My timemachine started to give me huge issues.
i tried all possible solutions but my TM on Lion does not want create a backup. It has in a week backed up everything but it wont creata a usable sparsebundle . It keeps on ejecting the disk. After clearing the V100 index file seems going better but it still does not create a usable file. The repair disk did not show any issues . going pretty much insane.
I was able to use an external with USB without issues. But the NAS Synology DS207+ running their latest firmware on it that is supposed to work with Lion over LAN is creating the problem.
Tried wirelessy , same issue.
My Network has Airport express extreme. the macbook is connected though directly to the router via LAN while the NAS to Airport via LAN. this setup worked before on Snow leopard.
Couple of TMbuddy codes lines:
Starting standard backup
Attempting to mount network destination URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
Mounted network destination at mountpoint: /Volumes/Macbook Backup Syn using URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
QUICKCHECK ONLY; FILESYSTEM CLEAN
Disk image /Volumes/Macbook Backup Syn/Enrico Mac.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Warning: Bytes to copy estimate was negative (-75305038)
100.0 MB required (including padding), 519.35 GB available
Waiting for index to be ready (101)
Error (256): fetching properties: Error Domain=NSCocoaErrorDomain Code=256 "The file “objects.xib” couldn’t be opened." UserInfo=0x7fbd3adbfa70 {NSURL=/Volumes/Time Machine Backups/Backups.backupdb/Enrico Mac/2011-09-02-135921.inProgress/6F08E59E-CE16-4DCD-8C2D-F44FB6040F6B/Enrico/Ap plications/iTunes.app/Contents/Resources/German.lproj/iPodWelcomeOffline.nib/ob j ects.xib, NSFilePath=/Volumes/Time Machine Backups/Backups.backupdb/Enrico Mac/2011-09-02-135921.inProgress/6F08E59E-CE16-4DCD-8C2D-F44FB6040F6B/Enrico/Ap plications/iTunes.app/Contents/Resources/German.lproj/iPodWelcomeOffline.nib/ob j ects.xib, NSUnderlyingError=0x7fbd3c1245c0 "The operation couldn’t be completed. Input/output error"}
Stopping backup.
Error (256): fetching properties: Error Domain=NSCocoaErrorDomain Code=256 "The file “keyedobjects.nib” couldn’t be opened." UserInfo=0x1096ddfa0 {NSURL=/Volumes/Time Machine Backups/Backups.backupdb/Enrico Mac/2011-09-02-135921.inProgress/6F08E59E-CE16-4DCD-8C2D-F44FB6040F6B/Enrico/Ap plications/iTunes.app/Contents/Resources/German.lproj/iTunesDJSettings.nib/keye d objects.nib, NSFilePath=/Volumes/Time Machine Backups/Backups.backupdb/Enrico Mac/2011-09-02-135921.inProgress/6F08E59E-CE16-4DCD-8C2D-F44FB6040F6B/Enrico/Ap plications/iTunes.app/Contents/Resources/German.lproj/iTunesDJSettings.nib/keye d objects.nib, NSUnderlyingError=0x1096c7fa0 "The operation couldn’t be completed. Input/output error"}
Backup failed because the network destination disk was ejected or disconnected unexpectedly!
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Error: (-34) SrcErr:NO Copying /Applications/iTunes.app/Contents/Resources/German.lproj/iPodWelcome.nib/object s.xib to /Volumes/Time Machine Backups/Backups.backupdb/Enrico Mac/2011-09-02-135921.inProgress/0D01FF21-79B2-4A6F-BBC8-58EAA4FF5ECD/Enrico/Ap plications/iTunes.app/Contents/Resources/German.lproj/iPodWelcome.nib
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Copied 90669 files (34 KB) from volume Enrico.
Error wri
Starting standard backup
Network destination already mounted at: /Volumes/Macbook Backup Syn
Disk image already attached: /Volumes/Macbook Backup Syn/Enrico Mac.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x10cb3df60 {MessageParameters=(
Ejected Time Machine network volume.
Waiting 60 seconds and trying again.
Attempting to mount network destination URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
Mounted network destination at mountpoint: /Volumes/Macbook Backup Syn using URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
Disk image already attached: /Volumes/Macbook Backup Syn/Enrico Mac.sparsebundle, DIHLDiskImageAttach returned: 35
Disk image already attached: /Volumes/Macbook Backup Syn/Enrico Mac.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x10cb45670 {MessageParameters=(
Ejected Time Machine network volume.
Waiting 60 seconds and trying again.
Attempting to mount network destination URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
Mounted network destination at mountpoint: /Volumes/Macbook Backup Syn using URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
Disk image already attached: /Volumes/Macbook Backup Syn/Enrico Mac.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x10cb490e0 {MessageParameters=(
Ejected Time Machine network volume.
Giving up after 3 retries.
Backup failed with error: 31
Starting standard backup
Attempting to mount network destination URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
Mounted network destination at mountpoint: /Volumes/Macbook Backup Syn using URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
QUICKCHECK ONLY; FILESYSTEM CLEAN
Disk image /Volumes/Macbook Backup Syn/Enrico Mac.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Warning: Bytes to copy estimate was negative (-3853366630)
100.0 MB required (including padding), 496.41 GB available
Waiting for index to be ready (101)
Stopping backup.
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Error: (-34) SrcErr:NO Copying /System/Library/Frameworks/Accelerate.framework/Accelerate to /Volumes/Time Machine Backups/Backups.backupdb/Enrico Mac/2011-09-02-135921.inProgress/E6213496-605C-48CB-AFB9-60C935297EEB/Enrico/Sy stem/Library/Frameworks/Accelerate.framework
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Copied 86208 files (1003.7 MB) from volume Enrico.
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Copy stage failed with error:28
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Backup failed because the network destination disk was ejected or disconnected unexpectedly!
Backup failed with error: 26
[SnapshotUtilities mountPointForVolumeRef] FSGetVolumeInfo returned: -35
Failed to eject volume (null) (FSVolumeRefNum: -153; status: -35; dissenting pid: -1)
Error i get:
Time Machine couldn’t complete the backup due to a network problem.
Make sure your computer and the backup disk are on the same network, and that the backup disk is turned on. Then try again to back up.

I am sure that there are other users that have had problems since updating the iOS. Have you totally reset the iPad up as a new device - not from a backup - and you are still having the issues?
If you have done so, have you tried closing all apps? Then when you start using apps - if the iPad works OK up until you launch a certain app - it may be that particular app is cursing the issue. And BTW, have you updated all of your apps since you updated the iOS?
Closing all apps .....
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

DOWNLOAD BUTTON DISABLED AFTER UPDATE WITH NEW VER...

Hi.. After update my E72 with newer version of OVI store, download button has been disabled and unable to download anything from OVI store. Further I m also unable to update the files in "sign in software" in ovi files... please help me fast, what should I do???

Hi DD16, Welcome to the Nokia Forums.
Please be try and sign out of your nokia account and relog back in, also be sure that you are connected to a stable WiFi connection, and also make sure that you have enough free space on your phone memory to install any new applications.
If you still experience issues with your store account please try and install Store QML from betalabs.
Please let me know if your problem persists or not.
Sheldrick
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

Address Book issues after updating Z10 to 10.2.1.2977

I purchased new Blackbeery Z10 last week, I updated phone software directly over Wifi by phone (not used computer)
After Update:
No Sim contacts
No phone contacts
unable to create and save a new contact
please provide a solution ASAP
Best Regards
Shailesh Kumar
Solved!
Go to Solution.

Hi and Welcome to the Community!
It sounds like something perhaps went wrong in the update you performed...I'd suggest a clean OS reload via either LINK or AutoLoader:
http://supportforums.blackberry.com/t5/BlackBerry-10-Smartphone/How-to-Reload-your-Blackberry10-OS/t...
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
Article ID: KB23393 How to check the model number and version of the operating system on a BlackBerry smartphone
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Wi-fi issues after updating to iOS 6 (SOLVED!)

If you are having an issue over the wi-fi connection after updating to iOS 6, where the log-in to your wi-fi network fail and send you to an Apple web page, this is how I solved it:
Turn of your iPhone, not restart or restore, just turn it off, wait 10 seconds and turn on the iPhone again... Bingo! you'll will have wi-fi again.
No idea how to turn of the iPhone?
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
(article link)
It's important to do this and not hold the Sleep/Wake button until the device restart, because I did that first and that's what started the problem. Remember, SLIDE TO POWER OFF is the trick.
I think this is a Facetime related problem now that it works over your cellular network, but I'm not sure. Let's hope more info to come along or a fix from apple be issue.
Hope it help.
Best regards to everyone.

Here's what I did that I read in another thread that appears to have worked for the time being:
1. Go to settings-->Safari-->Clear Cookies and Data
2. You will get a pop that asks to you confirm that you would like to clear cookies and data, do it.
3. Restart your iPhone by holding the home button and on/off button UNTIL THE APPLE LOGO APPEARS ON THE SCREEN. Don't let go early.
4. If not connected to wifi, connect through settings menu.
Again, this fixed my problem but others are reporting that it did not work for them. Good luck and hopefully Apple will get a patch out ASAP.

Lock button issue after update

Similar Messages

Maybe you are looking for