Lock code problem aftr updating

I have updated my e63 to 510.21.010 now its asking me d lock code while I switch on the phone. I wanna get completely get rid of this problem. Plse somebody help.

The default Nokia lock code is 12345 unless you have changed it yourself and forgotten it. If that's the case then you will have to visit a Nokia Care point to get it reset.
If the phone is asking for the SIM PIN then check with your SIM provider for the default PIN. If you have changed that one as well and have forgotten it then you can enter the wrong code until the SIM gets locked and unlock it with the PUK supplied with the SIM. This will reset the SIM PIN and you can enter a new PIN for that.
Ray.

Similar Messages

E63 Lock Code Problem After Update

I recently checked for a firmware update for my E63. I got excited when i found out that there was an availabla one, the 510 .21 .010 and I immediately started the update process. Everything went ok but when i switched On the phone it asked me for the lock code after 3 or 4 seconds. I tried the default one , 12345 but it showed a code error message. I can't do excatly nothing but the weird thing is that buttons Calendar,Contacts and Mailbox work but i still can't do nothing else.The Home button does not work. It doesn't seem a normal behaviour.Could it be a bug? I read a lot of posts about this problem so this means I'm not the only one having this problem. Please help me. I really need my E63 back as it is my do-everything tool. Maybe a new firmware with this bug fixed would be best.
Thank You in advance

hello, you will need to contact your nearest Nokia Care with proof of purchase/ownership, for them to reset your security code.

N85 v30 Lock code problem !!

I've got a problem, !!!!!!!!!!!!!!!!!!
I updated the software to v30 and my lock code is lost !!
It used to be 32159 and when i tried it it didn't work so i tried the defult 12345 which didn't work too !!
I noticed something else: The phone was set to lock automatically after 20 min and now it doesnt do so !!
Has anyone got tthe same problem or is only my device ?

Try to hard format your phone.if the problem not solved, take it to NOKIA care service.
you can hard format your phone as following:
switch off your phone.
press and hold "Green key" And "*" and "3" and as you are holding those keys switch on your phone.
Nokia N79 4GB
SW Version: 32.001 RM-348 MEA

!! Need help !! 5800 XM Lock code problem !!

hello all ,
Month ago i bought Nokia 5800Xm , next day of buying i find out problems with my handset , first of all all of my data in the memory card gets automatically deleted " don't know the reason " after that everytime when i click on messages it says cannot access memory card phone memory will be used. The main problem was that when the phone is locked then each time when i cancel the it " means cancel the lock code " there was a square dot in b/w 4 and 7 , next day i was at Nokia care and gave ma handset for check n all , they 1 of all said that it is a software issue , suddenly they say that it is a screen problem and the handset screen will be replaced . I was shocked when i hear this , they say aftere 15 days it will be replaced , i gave ma handset to them , after 15 days yesterday they gave me ma handset . The black dot problem was solved but now whenver i cancel the lockcode , the background where lock is present sometime the screen get full black , sometime half black screen and half lock is shown , sometime full lock is shown, i again went to Nokia care they say it is the newly firmware problem " don't know if there were lying or something " . My Nokia 5800XM ver. is v31.0.008
Plz tell me is there any other problem ?? I buyed it from Nokia , so i shout them that if there is another problem in ma handset , i need a new Nokia 5800 XM .
Thanks
Marshal

What country are you in? Phones for certain countries where GPS on phones is outlawed (China I think is one) have no GPS built in, or functionality removed.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Lost lock code after firmware update

Hi,
I recently updated my E66 firmware (i don't remember the versions now). The thing went ok, the phone is working... in general ok, except that: When I try to change something that requires the lock code. It don't recognize my old password. Now it showed me some error about 5 tries and it diapered before i could reed it all.
The phone is working, but I'm afraid that if it turns off I will be unable to power it on again.
Does any one know what that message was. And Is there a way I can get arraund to change the lock code, since the phone is working?
Thanks.
P.S. I can't get the phone to a Nokia Care Center because there's none In Uruguay, and even so, this phone isn't available in the region.
Solved!
Go to Solution.

On some phones the lock code is reset to the default 12345 when the firmware is updated. This is what must have happened with your phone.
However, since you have entered an incorrect lock code too many times in succession, the only way to unlock that now is for you to send the phone to a Nokia Care Point. There is no other way.
The phone shouldn't ask you for a security code when it starts, only for the PIN protecting your SIM. Some Eseries and Nseries phones, however, have a facility called "remote locking" whereby you can lock the phone by sending it an SMS with a code in it that you can define. If this function is activated then the phone does also ask for the security code when you switch it on.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

IPhone 3G Locking Code problem

iPhone 3G
iOS 4.2.1 Build 8C148
Pic at http://img38.imageshack.us/img38/8528/photolu.png
Problem:
I know my code and I have no problem getting into the phone.
I just want to deactivate it but no option available (see pic).
When entering locking code menu, it prompt me to enter my code, I do so and then I only have the option to "change the code" but not to "deactivate it".
It seem to be a very pinpoint problem with 3G, because my other phone is a 3GS build 8C148a and it got the option available.
Thanks for any help.

Ok.

Nokia 5700 Lock Code Problems

Hi All
This is what I do.
Menu - Settings - Phone Settings - General - Security - Phone and Sim - Lock Code
When I select Lock Code it asks me to enter the Lock Code so I enter ANY number over 5 digits, it asks for a new lock code so I enter 67890 (5 digits), Asks to verify so I re-enter it correctly and I get a code error.
If I repeat this process 5 times it says I've entered the Lock code incorrectly and can't do it again for 5 minutes.
It also asks for this code when I attempt to reset the phone to which I enter 12345 and it errors, plus it asks for the lock code when I try to set up a timed phone lock.
If I enter any 4 digit code it just asks for Lock Code again.
Any assistance would be appreciated.
Thanks
TopesMessage Edited by topes on 05-Sep-200703:11 PM
Nokia 5700 XpressMusic
Vodafone NZ Subscriber

I too attempted to take it to a Nokia Service Centre, who reflashed it but to no avail.
I then took it to an independant mobile repair centre and he was able to resolve the problem.
He advised that the lock code had been changed and they were able to read it (giving me the old code which I didn't recognise) and then resetting it to 0000.
I would have thought the NSC reflash would have resolved this.
Cheers
Topes
Nokia 5700 XpressMusic
Vodafone NZ Subscriber

6120c lock code problem

my 6120 dont acept my lock code. i use flash box to remove password or change it to defult code and every thing seems ok .but aain my phone dont acept code . this seems hardware problem . pls give me passwrod solution map . sry for my weak english

there is no code to give you
you would need to send it to a nokia care center to be reflashed but since you have already attempted this yourself they may not help so contact your local nokia care center
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Lock code problem with last firmware of 5800 (v20....

hi everybody
what is the new lock code or the solution for this problem?
Message Edited by elhardudi on 10-Feb-2009 12:17 AM
Solved!
Go to Solution.

Unfortunately the only known solution at the moment is to take your phone to a nokia care point.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

E66 Lock Code Problem

I have E66 mobile i wants to format my phone but at the time of code i am entering default code 12345 but its not working even i not changed my code. Can some one help me how can i again reset my code so that i can access my mobile
Thanks

The default unlock for most Nokia phones is 12345 unless you have changed it. Normally this code can only be reset by the Nokia Care Points. However some of the latest S60 models can be reset to the default code by reformatting the phone.
There have been cases of this code being changed by certain networks. When this is the case, the security code will be on the label on the box, close to the IMEI (International Mobile Equipment Identifier) number. This number will be a 5 digit number but not necessarily marked as a security code.
Some S40 5th edition phones, such as the 6500 Slide or 6301, don't always have a preset lock code. In these cases, you will be prompted to create the code the first time you try to perform an action that needs one (such as clearing logs or restoring factory settings). You can also create the code from the Settings>Security>Access Codes menu.

Nokia n96 lock code problem

I forget my master reset code so can't reset my nokia n96 & also can't use any mamory card.Whn i put in any mamory card thn phone asking for lock code but i 4get tht...I updte my firmware but still its not fixed...So plz some1 help me...Thnx

If you have changed the code from the standard 12345 then there isn't a way to recover the code.
You could try the hard reset (hold down the *, 3 and green keys whilst the phone is switched on until at least the handshake logo), or have the phone flashed at a Nokia service point. Either way, the phone will be completely wiped so you need to back up important data like contacts and messages first.

Lock Objects Problem while updating entries in custom table

Hi Friends,
Iam updating a custom table ztable from internal table entries.
ie : Modify ZTABLE from table ITAB.
Now the entries are updating and inserting perfectly..
But my problem is i need to use lock objects before doing this..
I have created a lock obect EZTABLE with all th ekey fields of the table.. ie : it has 2 key fields
item & matnr .
Now how to use lock objects here.. do i need to loop the internal table and use enque & deque function module each and every time in loop or use it out side the loop..
Can any one explain me this..
Regards,
Kumar

hi kumar,
**check if the equipment is already locked by user, if yes, trigger a mail
            CALL FUNCTION 'ENQUEUE_EIEQUI'
             EXPORTING
            MODE_EQUI            = 'E'
            MANDT                = SY-MANDT
               equnr                = lv_equi_temp
            X_EQUNR              = ' '
            _SCOPE               = '2'
            _WAIT                = ' '
            _COLLECT             = ' '
             EXCEPTIONS
               foreign_lock         = 1
               system_failure       = 2
               OTHERS               = 3.
            IF sy-subrc <> 0.
              lv_subrc1 = sy-subrc.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
            ELSE.
              CALL FUNCTION 'DEQUEUE_EIEQUI'
               EXPORTING
            MODE_EQUI       = 'E'
            MANDT           = SY-MANDT
                 equnr           = lv_equi_temp
            X_EQUNR         = ' '
            _SCOPE          = '3'
            _SYNCHRON       = ' '
            _COLLECT        = ' '
            ENDIF.
try like this to check if the object is locked....
u can also use
call function 'ENQUEUE,.
do the needful changes update the database then commit work
then call function 'DEQUEUE'
hope this helps,
tanmaya

Pass code problem after update

I ca't use location services and found restrictions were enabled. We have never set this passcode for restrictions and it looks like this sometimes happens with updates. Please don't tell me I hv to reset phone. If so I feel I am now working with Microsoft.! The GPS always worked fine before and now I am on vacation and can't use phone.

Hello Tmoes,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Understanding Restrictions (parental controls)
https://support.apple.com/kb/ht4213
Note: If you lose or forget a restriction passcode, you will need to perform a factory restore to remove it.
Have a nice day,
Mario

5800 lock code

after firmware update to v21 it's not possible to input alphanumeric lock code, and the update did not reset it to 12345. so, how to change the code if it had letters in it?
Solved!
Go to Solution.

I found the solution , you need switch keyboard from numbers to alphabet. just do it by press for a while “#”.

E66 asks me for the Lock code after updating with ...

Please help me with my problem! I had used Nokia Software Updater after it finish it has asked me for the Lock Code I really don't know what to do.

Try 12345

Lock code problem aftr updating

Similar Messages

Maybe you are looking for