Lock error while Changing the Routings through IDoc

Hi All,
        we are trying to change the routing by passing change mode X using IDoc /SAPMP/ROUTING01 with message type /SAPMP/ROUTING and we using the function module /SAPMP/IDOC_INPUT_ROUTING to process the IDoc. We have no problem while creating but when we are trying to change we getting errors that Header, Operation & Sequence cannot be locked (lock management error).
On executing this IDoc we are getting errors with meggase No. CPCL015 Header cannot be locked(lock management error), CPCL218 Operation cannot be locked(lock management error), CPCL115 Sequence cannot be locked (lock management error).
Please help me in resolving this isuue.

Use OP77 to define work area. Check the flag for locking the header and use that work area in BAPI interface for changing the task

Similar Messages

  • Error While terminating the employee through API

    Hello Group,
    I am facing the error while terminating the employee through standard api. The error is "You cannot create an entry past the termination rule date" The element entry I have are type "Recurring" and Termination at "Final Close" I have gone through the thread
    " http://forums.oracle.com/forums/thread.jspa?messageID=3794867 " Which is partial complete.
    Will be looking forward for the response.
    Thanks,
    Nitin Singh

    This doc directs to apply a patch.
    I have gone through. Just want to cross check if this required. I am able to terminate the employee through the application. There it just throws the warning saying " Element Entry has been changed for the Employee as the result of the termination do you wish to go with the termination"
    Srini let me know your opinion.
    Thanks
    Nitin Singh

  • Error while compiling the composite through custom ant script

    Hi,
    I am getting the following error while compiling the composite through custom built ant scripts which are intern call the ant-sca-package.xml. And the composite is created by upgrading the 10g bpels. But the same composite is successfully compiling from Jdeveloper (11.1.1.4).
    oad of wsdl "oramds:/soa/shared/workflow/NotificationService.wsdl" failed
    oracle.fabric.common.FabricException: Error in getting XML input stream: oramds:/soa/shared/workflow/NotificationService.wsdl: oracle.mds.exception.MDSException: MDS-00054: The file to be loaded oramds:/soa/shared/workflow/NotificationService.wsdl does not exist.
         at oracle.fabric.common.metadata.MetadataManagerImpl.getInputStreamFromAbsoluteURL(MetadataManagerImpl.java:280)
         at oracle.integration.platform.common.MDSMetadataManagerImpl.getInputStreamFromAbsoluteURL(MDSMetadataManagerImpl.java:555)
         at oracle.fabric.common.metadata.MetadataManagerImpl.getDocumentAsInputStream(MetadataManagerImpl.java:159)
         at oracle.integration.platform.common.MDSMetadataManagerImpl.getDocumentAsInputStream(MDSMetadataManagerImpl.java:417)
         at oracle.fabric.common.wsdl.WSDLManager.loadWSDL(WSDLManager.java:241)
         at oracle.fabric.common.wsdl.WSDLManager.loadWSDL(WSDLManager.java:304)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:934)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Caused by: java.io.IOException: oracle.mds.exception.MDSException: MDS-00054: The file to be loaded oramds:/soa/shared/workflow/NotificationService.wsdl does not exist.
         at oracle.mds.internal.net.AbstractOraMDSURLConnection.getPDocStream(AbstractOraMDSURLConnection.java:388)
         at oracle.mds.internal.net.AbstractOraMDSURLConnection.getInputStream(AbstractOraMDSURLConnection.java:176)
         at oracle.mds.internal.net.OraMDSURLConnection.getInputStream(OraMDSURLConnection.java:67)
         at java.net.URL.openStream(URL.java:1010)
         at oracle.fabric.common.metadata.MetadataManagerImpl.getInputStreamFromAbsoluteURL(MetadataManagerImpl.java:276)
         ... 9 more
    Caused by: oracle.mds.exception.MDSException: MDS-00054: The file to be loaded oramds:/soa/shared/workflow/NotificationService.wsdl does not exist.
         at oracle.mds.internal.net.AbstractOraMDSURLConnection.getPDocStream(AbstractOraMDSURLConnection.java:339)
    And in the following blog, its recommended to check for the adf-config.xml. But when upgrading the bpels from 10g to 11.1.1.4, I don't see any such file created by Jdeveloper.
    http://orasoa.blogspot.com/2010/08/ant-and-mds-composite-compile-error.html
    Not sure if I am missing some properties to add in by custom script while compiling.
    Thanks
    Sree
    Edited by: Sree on Jul 4, 2011 7:25 AM

    Hi Hussain,
    Thanks for the reply.
    Were you able to compile the form at the client side successfully?
    1) Were you able to compile the form at the client side successfully?:
    Ans: Yes, I was able to compile the form successfully at client side.
    2) Are you logged in as applmgr user? Have you sourced the application env file before compiling the form?
    Ans: No, I have not logged by applmgr user, i am using my own login. Yes I have sourced the application env file before compiling the form
    3) What does "echo $FORMS_PATH" return?
    Ans: echo $FORMS_PATH on server gives this path
    /u01/app/EBS00/apps/apps_st/appl/au/12.0.0/resource:/u01/app/EBS00/apps/apps_st/appl/au/12.0.0/resource/stub
    Can you please advise?
    Thanks,

  • Error while executing the payroll through transaction code PC00_M40_CALC

    Dear Sir/ Madam,
    While executing the payroll through the transaction code PC00_M40_CALC , i am getting the error as mentioned below :
    "Division by zero not performed "
    Calculation rule X0133****5            RTE = ISDIVP DIVID ARR ZERO=A   ADD
    I am not able to resolve this error. So request to guide me on this.
    Thanks & regards,
    vijaya.s.c.
    Moderator message: wrong forum, please have a look in the (I guess) ERP HCM forums.
    Edited by: Thomas Zloch on Jan 24, 2012

    Hi,
    Maintain have you changed any x013 rule?
    If not, just maintain attendance/time events then process the payroll.

  • System error while opening the timesheet through Portal

    Hi Experts,
    I am getting the below error message while opening the timesheet through Web Portal. But I am not getting any error if I book time through back end i.e. CAT2 Transaction.
    System error: No receiver could be determined
    This error comes in Portal only (not in backend) once I enable "HR Enables CATS" option in Data entry profile through CAC1 transaction. There is no error if the same option is disabled.  But we need this option to be enabled.
    Can anybody help me ASAP for the same?
    Thanks,
    Atin

    Hi Atin,
    Can you please let me know how was that problem with HR Enabled Cats is Solved as w are facing the exact same issue.
    thanks
    Gaurav

  • Error while changing the physical IP address of SOA related datasource

    Hello Everyone!!!
    I am facing a problem while changing the ip address of my SOA related datasource in weblogic 10.3,Below is a brief description about my prb:
    I have created a domain in weblogic 10.3 and have configured a datasource to it and its working fine initially.
    But i had to change the ip address of my datasource(i.e Edit the existing the setting of my domain) as my database was migrated to another m/c.The changes that i did was,I changed the url in the connectionpool tab of each of the datasource's listed in admin console(Please let me know if i have left out any other important place in which i had to make this change).
    After making this change my ManagedServer starts but my Enterprise Application named soa-infra doesnt start and when i checked the log to find out the error,this is what i came across:
    B2B-50025: Repository error: Error -: B2B-51572: Error reading input stream.: java.io.IOException: Stream closed
         at oracle.tip.b2b.init.Repository.initExchange(Repository.java:658)
         at oracle.tip.b2b.init.Repository.initialize(Repository.java:764)
         at oracle.tip.b2b.init.B2BServer.readRepository(B2BServer.java:509)
         at oracle.tip.b2b.init.B2BServer.initialize(B2BServer.java:212)
         at oracle.tip.b2b.engine.ThreadWorkExecutor.startB2B(ThreadWorkExecutor.java:345)
         at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:203)
         at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
         at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
         at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
    Caused by: Error -: B2B-51572: Error reading input stream.: java.io.IOException: Stream closed
    Any suggestion would be of great help.
    Thks in advance!!!

    Hey thks for the reply,
    We were able to solve the problem by just restarting our database,
    i got some reference from the below link(pls refer to this topic:Changing the IP Address of a Metadata Repository Installation):
    [http://download.oracle.com/docs/cd/E12839_01/core.1111/e10105/host.htm#CHDHAEFE]
    but m still confused do i have to restart my database server each time i change the DB server that m pointing to in my weblogic console and if yes can you pls help me understand what change happens when the database restarts that makes this work.
    Another issue that m facing now is that after solving the above prb(by restarting the DB) m not able to deploy process's on to my server.
    The Exception that appears in the log file is as follows:
    [2011-02-08T13:03:33.220+05:30] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.compiler] [tid: [ACTIVE].ExecuteThread: '17' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000Is4C5SLBLA1LzuP5iW1DKEXf000d33,0] [APP: soa-infra] [dcid: d61ccdb1526887f2:678e40b9:12e040e4cba:-7ffd-000000000000290f] <BPEL1Processor::generateProcessClass> MerchantSales_BPELProcess.bpel(line 228): invalid query[[
    query "/EmailPayload/ns3:FromAccountName" is invalid, because java.lang.IllegalArgumentException: null schema location for ns=http://xmlns.oracle.com/ias/pcbpel/NotificationService [Cause=null schema location for ns=http://xmlns.oracle.com/ias/pcbpel/NotificationService]
    Check the XML schema and make sure your query string is valid
    [2011-02-08T13:03:33.448+05:30] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.deployment] [tid: [ACTIVE].ExecuteThread: '17' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000Is4C5SLBLA1LzuP5iW1DKEXf000d33,0] [APP: soa-infra] [dcid: d61ccdb1526887f2:678e40b9:12e040e4cba:-7ffd-000000000000290f] <CubeProcessLoader::create> [[
    java.lang.Exception: BPEL compilation failed
         at com.collaxa.cube.lang.compiler.BPEL1Processor.generateProcessClass(BPEL1Processor.java:529)
         at com.collaxa.cube.lang.compiler.BPEL1Processor.loadProcess(BPEL1Processor.java:495)
         at com.collaxa.cube.lang.compiler.BPEL1Processor.loadProcess(BPEL1Processor.java:438)
         at com.collaxa.cube.lang.compiler.BPEL1Processor.createCubeProcess(BPEL1Processor.java:396)
         at com.collaxa.cube.engine.deployment.CubeProcessFactory.create(CubeProcessFactory.java:61)
         at com.collaxa.cube.engine.deployment.CubeProcessLoader.create(CubeProcessLoader.java:112)
         at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:238)
         at com.collaxa.cube.engine.deployment.DeploymentManager.deployComponent(DeploymentManager.java:182)
         at com.collaxa.cube.ejb.impl.CubeServerManagerBean._deployOrLoadComponent(CubeServerManagerBean.java:726)
         at com.collaxa.cube.ejb.impl.CubeServerManagerBean.deployComponent(CubeServerManagerBean.java:114)
         at com.collaxa.cube.ejb.impl.bpel.BPELServerManagerBean.deployComponent(BPELServerManagerBean.java:85)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)

  • Error while changing the Display Attribute into Navigational Attribute

    Hi all.. Gud Mrng.
    I was changed the attribute (product) from display attribute into navigational attribute and while save and activating the info object it is not getting activated and it is throwing the below error message.
    Error Message: u201CThe Info object is being used in several data targetsu201D
    My Questions:
    i)     Do I need to delete the data from all the data targets (where this info object is using)??
    ii)     Do I need to delete data only from the main info object (Zmaterial)? Is this single action enough?
    Please suggest me which action I need to follow & What are the precautions need to take while changing the Display Attribute (product) into Navigational attribute of info object (Zmaterial).
    Thanks in advance.
    Thanks & Regards,
    B Venugopal

    Hi Garima
    Only in case of key figures we cannot change it from display to navigational.
    If the info object is a characteristics then in the General tab of the info object if you select 'attribute only' then the iobj would be a display attribute only. If you leave it unmarked then you can use the iobj as a navigational atribute.
    I am sure you know that these settings only mean if a IOBJ can be used as display or navigational.  To  use it as a navigational within another object you will have to change the settings from 'DIS' to 'NAV' for the said info object in the 'Attributes' tab of its parent info object.
    Further if you use the parent info object in any data target / infio provider you will have to further mark the info object as 'navigational' while defining the attrbute of the said data target / info provider. The info object gets displayed in the data target / info provider attribute properties as 'parent IOBJ_info object'
    Cheers
    Umesh

  • Error while changing the component quantity

    Hi Experts,
    I facing an issue, while changing the component quantity of the process order. Parent material have fixed lot size and the componenets maintained as fixed quantity in BOM. When I try to change the quantity of the components in process order, it showing an message "Please re-explode the BOM, since the component quanities are changed.
    Why am getting this message?
    Regards,
    Sureshbabu G.

    Hi
    As Mr Reddy said, there is a fixed quantity indicator ticked in the BOM, therefore you are getting that error. Please remove the tick in BOM in the item details besides the quantity field and then try changing the quantites while confirming.
    Chandra

  • Error while testing the webservice through SOAMANAGER

    Hi All,
    I have created a webservice from a Function module ( RFC enabled). I am getting an error while testing the webservice from the SOAMANAGER but the function module is working fine giving proper output.
    The error is
    REQUEST:
    POST /sap/bc/srt/rfc/sap/zws_test_cms_bp_fac/600/zws_test_cms_bp_fac/zws_test_cms_bp_fac HTTP/1.1
    Host: ed1app.corp.fcc.ca:49000
    Content-Type: text/xml; charset=UTF-8
    Connection: close
    Authorization: <value is hidden>
    Content-Length: 654
    SOAPAction: ""
    <?xml version="1.0" encoding="UTF-8" ?><SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Header><sapsess:Session xmlns:sapsess="http://www.sap.com/webas/630/soap/features/session/"><enableSession>true</enableSession></sapsess:Session></SOAP-ENV:Header><SOAP-ENV:Body><ns1:ZSRAV_TEST_CMS_BP_FAC xmlns:ns1='urn:sap-com:document:sap:rfc:functions'><IT_BP_LIST><item><BP_NUMBER>9999990013</BP_NUMBER></item></IT_BP_LIST><IV_COMPANY_CODE>FCC</IV_COMPANY_CODE></ns1:ZSRAV_TEST_CMS_BP_FAC></SOAP-ENV:Body></SOAP-ENV:Envelope>
    RESPONSE:
    HTTP/1.1 500 CX_ST_REF_ACCESS:XSLT exception.An error occurred during serialization in the simple transformation program /1BCDWB/WSSE2B50F3FDFC9C2A94B7.Access to the table ref. node 'ZSCMS_FAC_CAG_DETAILS' outside a loop
    Set-Cookie: <value is hidden>
    content-type: text/xml; charset=utf-8
    content-length: 0
    accept: text/xml
    sap-srt_id: 20100202/041112/v1.00_final_6.40/4B67E41A4BC41B7CE10000000A013104
    server: SAP Web Application Server (1.0;700)
    please do the needful.
    Thanks in advance

    Hi,
    Here is a very smart tool for webservice test:
    [soapUI|http://www.soapui.org/]
    It works fine for me!
    bg,
    attila

  • Error while  changing Service order through  BAPI_ALM_ORDER_MAINTAIN.

    Hi Frens,
    I am facing problem while  changing a service order .
    I am changing the  HEADER ( Planner group & Basic Finish date )   through
    BAPI_ALM_ORDER_MAINTAIN.
      lt_methods-refnumber = '000001'.
      lt_methods-OBJECTTYPE = 'HEADER'.
      lt_methods-METHOD = 'CHANGE'.
      lt_methods-OBJECTKEY = l_aufnr.
      append Lt_methods.
      lt_methods-refnumber = '000001'.
      lt_methods-OBJECTTYPE = ' '.
      lt_methods-METHOD = 'SAVE'.
      append lt_methods.
      lt_header-orderid = l_aufnr.
      lt_header-PLANGROUP = 'GE'.    " Hard coding for testing
      lt_header-FINISH_DATE = '20081114'.
      append lt_header.
      lt_headerup-orderid = L_AUFNR.
      lt_headerup-PLANGROUP = 'X'.
      lt_headerup-FINISH_DATE = 'X'.
      append LT_headerup.
      CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
        TABLES
          IT_METHODS   = LT_methods
          IT_HEADER    = LT_header
          IT_HEADER_UP = LT_headerup
          RETURN           = LT_return.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
         EXPORTING
           wait = 'X'.
    I am getting error No : IWO_BAPI2  ( 118 )"  *Order 5001887 cannot be saved, since no operation is maintained."*

    Hi Balu,
    You can refer to the note 966289 which talks about this problem if a service order template is used.
    Thanks
    Abishek

  • SAP NAME FILE lock error while creating the TR in development system.

    Hi All,
    I am getting an error message while saving the changes in my SAP Script that 'SAP names file for <UserId> locked by another process'
    The name of the lock file is "/usr/sap/trans/tmp/<UserId>.LOS".
    Can any body help me, how to resolve this problem ?
    Thanks,

    Hi Kamlesh,
    did you find any solution? I'm getting the same error while a saving the changes in a Dynpro in the ABAP Development Workbench.
    Thanks,
    Viktor

  • Error while changing the UoM in material master

    Hi experts....
    I am not able change the UoM in the material master. Even if,  all the PR , PO and reservations are cancelled .
    It still gives me error message " Manual  Reservations already  exists "
    Thanx
    Ganesh

    Hi
    may be some entries got not cancelled properly and entries got locked.
    Just check in SM12 if no entries are locked.
    regards
    Sidi

  • Error while changing the data source at runtime

    Hi All,
    I want to change the DB connection(from Dev to QA) in the code before viewing it to the user. I browsed through the samples and found a code. But when I', trying to use the code, I'm getting the following error.
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKLogonException: Logon Error: invalid arguments in call---- Error code:-2147217393 Error code name:dbLogonFailed
    The following is the code:(Bold - problem area)
    private static void switch_tables(DatabaseController databaseController) throws ReportSDKException {
    final String DBUSERNAME = "irs_tin";
    final String DBPASSWORD = "monica30";
    final String SERVERNAME = "n3qvdb999.1dc.com";
    final String CONNECTION_STRING = "Use JDBC=b(true);Connection URL=s(oracle.jdbc.OracleDriver://n3qvdb999.1dc.com:1631);" +
                                                       "Database Class Name=s(oracle.jdbc.OracleDriver);Server=s(n3qvdb999.1dc.com);" +
                                                       "User ID=s(irs_tin);Password=;Database=s(IRSQA);Trusted_Connection=b(false);" +
                                                       "JDBC Connection String=s(!oracle.jdbc.OracleDriver!jdbc:oracle:thin://n3qvdb999.1dc.com:1631;" +
                                                       "DatabaseName={database};user=;password=!)";
    final String DATABASE_NAME = "IRSQA";
              final String URI = "!oracle.jdbc.OracleDriver!jdbc:oracle:thin://n3qvdb999.1dc.com:1631;DatabaseName=;user=;password=!";
              final String DATABASE_DLL = "crdb_jdbc.dll";
              Tables tables = databaseController.getDatabase().getTables();
    for (int i = 0; i < tables.size(); i++) {
    ITable table = tables.getTable(i);
                   //Keep existing name and alias.
                   table.setName(table.getName());
                   table.setAlias(table.getAlias());
    IConnectionInfo connectionInfo = table.getConnectionInfo();
    PropertyBag propertyBag = new PropertyBag();
    propertyBag.put("Trusted_Connection", "false");
                   propertyBag.put("Server Name", SERVERNAME); //Optional property.
                   propertyBag.put("Connection String", CONNECTION_STRING);
                   propertyBag.put("Database Name", DATABASE_NAME);
                   propertyBag.put("Server Type", "JDBC (JNDI)");
                   propertyBag.put("URI", URI);
                   propertyBag.put("Use JDBC", "true");
                   propertyBag.put("Database DLL", DATABASE_DLL);
                   connectionInfo.setUserName(DBUSERNAME);
                   connectionInfo.setPassword(DBPASSWORD);
                   connectionInfo.setKind(ConnectionInfoKind.SQL);table.setConnectionInfo(connectionInfo);
    databaseController.setTableLocation(table, tables.getTable(i));
    Thanks for your time.

    Hi Guys,
    I managed to fix my problem.
    I have used the method in the utility class at this location:
    http://code.google.com/p/struts2demos/source/browse/trunk/Struts_Demo_ThirdDemo/src/com/businessobjects/samples/JRCHelperSample.java?r=4
    -Anil

  • Activation error while changing the data type of a field of a table

    hi friends,
    i am facing one problem while changing a data type of a field of a table.
    i just created one table(Yqm32) .i have assigned charcter data type to one field(ztotal_count) .now i want to change this charcter data type to numeric data type.
      while changing to NUMC data type activation error is comming as below.
    Table is not yet classified                           
    Field ZTOTAL_COUNT: Type change                       
      ALTER TABLE is not possible                         
    Structure change at field level (convert table YQM32) 
    Check on table YQM32 resulted in errors   
    Table YQM32 could not be activated                       
    (E- Structure change at field level (convert table YQM32)
    plz suggest.i need to change the data type from char to numc.
    Thanks & Regards

    Hi Pabitra......
    From the SE11 change the table as u wanted and then from menubar select
    UTILITIES--> DATABASE UTILITY
    It will open database utility
    there u select the Activate and adjust database button.
    then the database table will get adjusted.
    just try it once.........
    Suresh......

  • Error while updating the records through a DB link

    Hi ,
    I am getting the below error while updating around 15 thousands records, i suspect it to be timeout but not sure.Please can you let me know what solutions needs to be taken.
    Not Found
    The requested URL /pls/htmldb/wwv_flow.show was not found on this server.
    Not Found
    The requested URL /pls/htmldb/wwv_flow.show was not found on this server.
    Oracle-Application-Server-10g/10.1.2.0.0 Oracle-HTTP-Server Server at htmldb.oraclecorp.com Port 80
    Object Type TABLE Object GWB_GRN_GRP_COUNTRIES_LU
    Table Column Data Type Length Precision Scale Primary Key Nullable Default Comment
    GWB_GRN_GRP_COUNTRIES_LU NAME Varchar2 720 - - - - - -
    ALIAS Varchar2 720 - - - - - -
    ACTIVE Varchar2 3 - - - - - -
    REGION Varchar2 300 - - - - -
    1 - 4
    Thanks & Regards,
    Ramu

    Hi Sangu,
    See if the following notes help you:
    Error when calling API from SQL*Developer, eg. ORA-01403 in API OE_ORDER_PUB.PROCESS_ORDER (Doc ID 1054295.1)
    Cancellation Of Transfer Orders Is Not Possible - ORA-01403: no data found in Package OE_Order_PVT Procedure Process_Order (Doc ID 391307.1)
    Thanks &
    Best Regards,

Maybe you are looking for

  • Best way to use Apple TV/iPad/Smart board

    Not sure I can explain this well as when it comes to wi-fi or home sharing, I'm completely lost.  But here is what I am doing now and what I need to improve. I have a smart board at school - no HDMI.  So, I connect my Apple TV (3rd gen) to VGA adapto

  • Performance Report domain controllers

    Hi AD experts, I'm lookink for a tool to generate performance report on some DC's. a script to createt Data collector Set (on Perfmon) like http://archive.msdn.microsoft.com/ExPerfwiz and the tool to parse the report like PAL : pal.codeplex.com Is th

  • Authorization Variable doesn't work in Workbook

    Hi all, I have defined authorization variable for a characteristics in Query. When I run the query, the variable's value can be derived from user's authorization. But when running in workbook, it doesn't work. The value is empty and workbook shows "N

  • Do Leopard icons increase the file size?

    In programs like Photoshop you have the option of including a preview or a thumbnail icon for the image you're saving. This is important to know because, if you are making a web page or trying to fit as many files as possible on a disk, you want the

  • Error report keep getting kicked out of adobe Illustrator

    Hi, I am having an ongoing problem with Adobe Illustrator. I keep getting an error message. I keep loosing quite a lot of work, when this happens. I try to keep saving my work regulary, but can't keep on doing this just in case. I am using windows xp