Lock graphics at line

I think this question has already been asked, but I really don't know what to search for.
I'm using ID CS3 on Windows XP SP2, and formatting a journal which is heavy in mathematical equations. I've done the equations in LaTeX, exported them as EPS images, and then placed them as graphics frames. The problem I'm running into is that, after all the equations are placed, if I edit the earlier parts of the document, the text will shift, but the graphics frames (containing the equations) stay put. I end up having to readjust all the graphics frames each time I make a change in the text. I know that I can anchor the graphics frames to the pages, but is there a way to anchor them to a position between paragraphs, or between lines, so that they shift if the paragraph shifts? Thank you all for the help.
Peter

Place them as inline graphics or anchored objects depending upon the
layout. In any event you now how the two terms to search for.
Bob

Similar Messages

  • Lock the time line

    I want to fix a certain frame to a specific point of an audio track. If I hit play, then stop, the timeline moves on to the point where I stopped. I don't want that. I want to specify the specific point of the audio track, what it several times, move the video clip and have the timeline stay put, not move when I hit "stop".
    This works great in Garage Band (there are two small downward arrows in the bottom left corner, one above the other, if I click on them, one moves to the left, the other to the right, then the timeline is locked), there must be a way in FCP X.

    David, thanks for the answer.
    I find this very difficult as far as precise editing with music is concerned. To sync the exact moment e.g. in lip syncing (when a "p" is spoken) to the pre-existing audio track, I need the time line to stay put, as it does in Garage Band.
    How do you guys do this with a moving time line?

  • How can I lock the 'To:' lines in the write window?

    Since the latest Tbird update, when entering a 'To:' address, as soon as I hit tab or enter, the 'To:' line scrolls up and it looks like I have not selected an address. But I actually have, its just that I cannot see the address because it has scrolled up out of view.
    Using Win8 64bit in Win7 mode on Sony VAIO.

    I had this problem and it was stationery that was the issue. I did as follows.
    Click on (TOOLS) then select (STATIONERY OPTIONS) Then select (OPTIONS) and go to bottom of page. (NUMBER OF ROWS IN ADDRESSING WIDGET) The box will have 2 in, so reset this to 2.5 and your problem should go away like mine did.

  • BFG FX5900 Graphics (Strange Lines)

    I've installed 3 of the same cards on this K72NG-ISLR motherboard, and i get the same result.  Verticle Lines with little dots in them flashing.  This happends at the Main BIOS screen and during the Windowsxp Logo testing startup screen.  After that is much better, but still have shadowing, lines around the mouse pointer, and some corrupted Icons on the desktop in windows.  I have Latest bios release 1.6 Award, and i'm not sure if there's a hardware update for the 128meg CFG FX5900 yet.
    As anyone else here had similar problems?  Please post remedies, or shed some light on the subject.
    Thanks.

    I've seen screens like that due to a seating problem with the card.
    As you describe, logging out, or a restart would restore the screen.
    When I first saw this behavior, it was when the machine was awakened from Sleep......
    Reseat the card, and when tightening the hold down screw, make sure the card does not pull over to one side as the screw is tightened.
    The clockwise turn of the screw can move the card over (down in the G5) which can cause some pins to have weak contact.
    Also take care that the card is not tilted forward at all.
    Pulling on the cables can cause the connectors toward the rear of the card to slightly lift out of the slot.
    If, after cleaning, and adjusting the seating of the card, the symptoms continue, or especially if they worsen, the card may be considered compromised.
    I would also try running the machine in a new user account just to be sure that a software problem within the account isn't culprit.

  • Image Capture can't delete items on iPhone, shows 'locked' graphic

    I can't seem to press the 'delete' button or use the delete key in Image Capture. When selecting the images, it remains greyed-out. There is also a 'lock' image next to all the files. How can I delete these?

    I had this problem, too. What worked for me was going into Settings > iCloud > Photos on my iPhone, and turning off iCloud Photo Library.

  • Problem inserting graphics from line and draw to illustrator

    Hello everyone,
    I had just installed Draw and Line (mobile apps) to my iPad and they both work fine, except when I am trying to insert projects toillustrator... Mind you that there is no problem with photoshop or saving in creativecloud.
    I am getting an error that reads "The file "Project - Drawing.line" is an unknown file format and cannot be opened." I get the same messagewith drawwith the only difference that the.linebecomes.draw.
    I have found this thread:
    Illustrator CC 2014 can't open files sent from Draw.
    But does not help me at all as I suspect they are referring to iOS as my version is also 18.0 and I just updated everything and there is nothing new for illustrator. The only matter I could address would be to remove my old version of CS but I would prefer not to yet, as I see that sometimes there are bugs to newer versions and I do not want to be left without a working solution.
    I am running windows 7 64bit and any help would be really appreciated.
    Kindest regards,
    Michael

    Dear Larry,
    Thank you very much! That fixed both my problems. I would have never though about it.
    Note for others, by logging out and in again I got like 9 updates that previous were not there, although I have updated everything like 3 hours ago.
    Thanks once more Larry have a perfect evening!
    Kindest regards,
    Michael

  • HT1338 OSX 8.6.8 boot disk on 2013 mac mini locks up with lines of code on screen, why?

    boot up new mac mini and it locks up showing code ending with error: turn the computer off to restart, how can i make it work?

    Your machine cannot boot with a Snow Leopard install disc.

  • Create/drawing graphical data (line, circles, boxes , dots, etc)

    Hi,
    Currently I am trying to write an application with Applescript Studio. The application collects time-measurements. Is it possible to create graphs within Applescript Studio?
    There is an application named Smile which has applescript facilities (graphical library) . But is seems that this library cannot be used under Xcode.
    If it is not possible do make graphs under Applescript Studio then I would like to see changes in Applescript Studio release.....(just a hint....)

    Thanks Eric,
    Perhaps I have to dig into this too:
    http://developer.apple.com/documentation/Cocoa/Conceptual/ScriptableCocoaApplica tions/SAppsintro/SAppsIntro.html#//appleref/doc/uid/TP40001982-BCICHGIE
    However I hope in future the cocoa drawing techniques can be used directly in AppleScript Studio too....

  • IPad2 screen lock problem on-line

    Brand new iPad 2.. tried to use the internet and it can find the website but as soon as a website is loaded, it will not let me use the touch screen - it doesnt work, goes grey so that I cannot do anything. Is there a setting which I can change. It was ok yesterday so something has changed? The screen is not broken as the touch screen works when not using the internet - games etc?? Help!

    Assuming that it's not a flash-based site (which isn't supported) that you are trying to access, try clearing Safari's cache (Settings > Safari > Clear Cache and Clear History), and also close the app completely : from the home screen (not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar. Then try re-opening Safari
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • PO line item locking issue

    Hi,
    Does anyone had this issue before?
    In ECC5, we lock the PO line item using FM ENQUEUE_EMEKKOE, but SAP still lets you create/confirm Transfer Orders for Inbound delivery, however, the same FM is not allowing you to create/confirm TO's in ECC6.

    Dear Poster
    Your thread has had no response since it's creation over
    2 weeks ago, therefore, I recommend that you either:
    - Rephrase the question.
    - Provide additional Information to prompt a response.
    - Close the thread if the answer is already known.
    Thank you for your compliance in this regard.
    Jason Boggans
    SAP SRM SDN Moderator

  • My i phone is locked up my apps when  i touch them have a line or box around it

    my  iphone is locked with a line around whatever you touch or a box around the app

    Sounds like you have VoiceOver enabled.
    With VoiceOver enabled, VoiceOver speaks the items on the screen along with having an outline around the selected item.
    To select an item, you touch it and the selected item will be voiced.
    To activate the selected item - the selected item will have an outline around it, double-tap it.
    To scroll, flick three fingers.
    You need to work your way to Settings > General > Accessibility > VoiceOver > Off.
    Or with your iPhone connected to iTunes, under the Summary tab for your iPhone sync preferences with iTunes, select Configure Universal Access. Select Neither for Seeing - to deselect VoiceOver followed by selecting OK.

  • Mac pro 1,1 Graphics card upgrade

    Hi Im using a Mac pro 1,1 with a TI Radeon X1900 XT: That i need to  upgrade because i believe the card is going bad. I took the card out & blew all the dust out & re seated the card & it worked great for a couple days but now Im back to having issues with it again. i.e computer locking up & wierd lines on both diplays & even distorted graphics.
    Anyways I use 2 23" cinema displays. I want to get a new card that will support this set up. OWC sells a card (ATI Radeon HD 5770 Graphics Upgrade Kit) that is supposed to work with a Mac pro 1,1, but it has 1 dual link dvi & 2 minidisplay ports.
    My question is will the 5770 work with the 1,1 & can I hook up my two 23" Cinema diplays to the mini display ports with a adapter? Or does anybody recommend a different card? Im a photographer mainly using photoshop CS5, Lightroom, inDesign, & very little video editing.
    Thank you in advance for any help!
    Tony
    Spec listed below:
    Model Name:    Mac Pro
      Model Identifier:    MacPro1,1
      Processor Name:    Dual-Core Intel Xeon
      Processor Speed:    2.66 GHz
      Number Of Processors:    2
      Total Number Of Cores:    4
      L2 Cache (per processor):    4 MB
      Memory:    12 GB
      Bus Speed:    1.33 GHz
      Boot ROM Version:    MP11.005C.B08
      SMC Version (system):    1.7f10
    TI Radeon X1900 XT:
      Chipset Model:    ATY,RadeonX1900
      Type:    GPU
      Bus:    PCIe
      Slot:    Slot-1
      PCIe Lane Width:    x16
      VRAM (Total):    512 MB
      Vendor:    ATI (0x1002)
      Device ID:    0x7249
      Revision ID:    0x0000
      ROM Revision:    113-A52027-140
      EFI Driver Version:    01.00.140
      Displays:
    Cinema HD:
      Resolution:    1920 x 1200
      Pixel Depth:    32-Bit Color (ARGB8888)
      Display Serial Number:    2A7442CDXMN
      Main Display:    Yes
      Mirror:    Off
      Online:    Yes
      Rotation:    Supported
    Cinema HD:
      Resolution:    1920 x 1200
      Pixel Depth:    32-Bit Color (ARGB8888)
      Display Serial Number:    2A83116JXMN
      Mirror:    Off
      Online:    Yes
      Rotation:    Supported

    Tried reading the comments on the product page?
    Noted if and how many threads there are here?
    Sorry, but has been asked every day pretty much for last year.
    Yes with 10.6.5+
    5770 in the 2006 Mac Pro
    Radeon 5870 5770 2006 Mac Pro
    ATI Radeon HD 5770 MC742ZM A Apple Store

  • CS5 ISSUE - STORIES NOT LOCKING ALL THE TIME IN INCOPY

    I have an issue where sometimes we will have one user open a story and it will NOT show it as being locked (pencil with line through it).  The majority of the time it will, but seems to happen too often and I see it being a problem this coming weekend as they start the switch from Quark to CS5.  I just can't have users being able to check out the same story as one person will overwrite the other.  We work off a file server with ExtremeZip installed.  Has anyone else seen this?  Sometimes if the document is available to be refreshed, like on a different story, it will then put a lock on the file.   I am not doing anything cross platform, this testing is done on 2 macbook pro's with both IC and ID CS5 installed.  Any help is much appreciated.
    Thanks, Bob

    We have also had this problem. We started the Indesign/Incopy workflow in CS2 and did not see this happen until CS4. It's continuing in CS5. Apparently there is a delay in the lock file being created. If someone else checks the story out before that locked file is created, it appears both parties have the story checked out. However, only one of them actually has command of the file and only their edits will be saved. We reported this to Adobe last year when we began seeing it in CS4, and they were able to replicate the problem; however, they've not fixed it.
    We haven't tried the "refresh" workaround. I'll give that a try. I've also wondered if checking out multiple stories at once causes the problem. Some of our editors have the habit of checking out all the stories in a layout at one time. Obviously, it takes a little time for the locked files to be created on as many as 100 stories. If someone else tries to check out one of those stories in the meanwhile, Incopy lets them. At that point, we have a problem.

  • Hard Drives locked after Leopard Install

    Since this only happened after I installed Leopard, I figured here would be a good place. My apologies if it is not.
    The root ( /Volumes/Entreri/ and /Volumes/Akira ) are now read only. All folders and files within them have correct permissions.
    History: For a long time now, I've promised myself that one day, I was going to wipe my main drive, Ishii, and do OSX RIGHT. Ever since I had initial permissions problems since I upgraded my systems from OS9 to OSX, I ran my system (a Dual 1 Ghz Quicksilver G4) as root. Cringe away. I was young, and my attitude was that my dang computer was not going to tell me what I could, and could not delete (and trust me, after the initial switch and for years beyond, OSX still gave me plenty of those problems).
    But I grew older and knew it was time to just run as an admin user, and not root. When Leopard was released, I figured it would be time to wipe my system HD (Ishii) totally clean, install OSX 10.5 and run as a normal user "sean."
    Install goes fine. The finder pops up and I start to make what I assume are my first mistakes of my new life as an admin user. I get info on Entreri and Akira, and see their permissions are set to rwrwr-. **** no I say. The Everyone group (for some reason...) needs to have write access!! I change the permissions to rwrwrw and "apply to all enclosed items." It works! "Awesome," I thought, "all my permissions problems have been fixed!" I do that to both my Aux drives.
    Then I get info on the system drive, Ryoko, and see the same thing... and I change it, and I hit apply to all enclosed items. About 30 seconds after a little voice in my head nags: "Why would you need to do that? The drive was wiped fresh- every file in there has the permissions OSX set for it.."
    But it was in process- and I've learned not to interrupt OSX doing file changes.
    As I'm sure you can guess, OSX starts behaving strangely after that. I restart off the Leopard disk, and use the disk utility to Repair Disk Permissions. Due to the number of files I idiotically changed, that takes 4 hours.
    Now OSX runs fine.. but my Aux drives, Entreri and Akira, have their root directories locked.
    •Getting info on the hard drive makes it look like everything's fine.
    •Changing the permissions from rwrwrw to rwrwrw just to try and do something doesn't do anything.
    •Applying to enclosed items run, but the root directory is still locked.
    •Ignoring ownership on the volume doesn't change the locked root folder.
    •FileXaminer can't seem to do anything either.
    •Attempting to change the permissions in the terminal results in a Operation not permitted error.
    •Permissions as reported from terminal: drwxrwxrwx@ 25 root admin 918 Dec 8 14:15 Entreri
    •I ran as root, to see if I could fix the problem, but it's the same thing all over.
    •When booting from leopard and running disk utility, the hard drive's are still appearing as locked- nothing is wrong with the drives. I was thinking about reinstalling, but if the installer disk sees the drives as locked, I doubted that would make an issue.
    Entreri: 500 GB Seagate Barracuda 7200.9
    Akira: 80 GB Seagate Barracuda 7200.6 (4 years old or so)
    Ryoko: 80 GB Seagate Barracuda 7200.6
    Any help would be appreciated. I fully know I screwed up.

    Same here, I have 3 extra internal drives and they now show a lock graphic on the desktop icons. If I try and write any files to the drives I get a prompt stating the drive cannot be modified. I'm given an option to Authenticate with my password, but I then get a message that says I don't have sufficient access privileges. I just updated through Software Update but didn't pay attention to what was being patched. I'm guessing a security update screwed this up. I really need my drives because I use them for media production and I have a serious deadline...come on Apple, test things out before sending updates!

  • Mass Unblocking of PO lines

    Hi Experts,
    Let us say in an STO (Stock Transfer Order), I have LOCKED the PO line item, and I will unlock it for further processing at a later stage.
    I have many such STOs with lines LOCKED.
    Is there any mass function which will enable me to UNLOCK these lines instead of me having to go into every STO in change mode.
    Regards
    Siddharth

    Hello,
      so the only solution would be developing a custom program  which will carry out only that task (unlocking PO items). In this way you will control the only field to be modified.
    If you can determine according to an affordable criteria, the PO item to be released, you can define a selection variant in transaction MEMASSPO and then schedule tha change as a back-ground job scheduled periodically.
    Best regards,
    Andrea

Maybe you are looking for