Lock icon stays on the screen
Usually i let my ipod battery die out completely before recharging. This time when i charged it, the lock symbol came up, even when the hold button is toggled off. the only time it turns on now is when i charge it or connect to the computer and still, the lock icon is there. any help would be great!
I took mine to the new Apple store here in Beijing and was pleasantly shocked when they offered to swap it out for a brand new one! My guess is that its cheaper to swap it out and recycle my old one than send it off for repair. This was extra surprising because I was pretty sure that the warranty expired. There must be some known problem with the switches on this model and so they're replacing them...
Similar Messages
-
IPhone 4s 'ringer' icon stays on the screen and i can't get rid of it..?
Hi, I have the new iPhone 4s but am finding that the mute o'ringer' icon stays on the screen and i can't get rid of it..! Which means it overshadows anything you are doing. Any ideas how to get rid of it? I have tried holding on/off and home button but it still does it... Thank you in advance.
I don't know if anyone else has this problem: iphone ringer icon stays on
I backed my phone up then did a complete reset on iTunes and its working fine now hope it helps someone -
My ringer volume keeps turning itself up to max and then the volume icon stays on the screen, anyone know how to fix this?
I Have the exact same issue why is there still no fix?!?
-
The volume icon stays on the screen all of the time
The volume icon stays on the screen all of the time and the volume does not work.any suggestions?
Try a restart - hold the Home and Sleep buttons for arund 7-8 seconds until the Apple logo appears
-
Volume icon stays on the screen most of the time
I have am having a problem with my iPad 2. Normally, if you press the volume button, a symbol appears on the screen showing when the volume goes up or down. This symbols should disappear within seconds. However, this is not the case with my iPad. The symbol is on the screen 90% of the time that I am using the iPad. The volume goes up by itself. I got it checked at a tech store and the technicians said that everything was working properly. If any knows how to fix this problem, please let me know.
Try a restart - hold the Home and Sleep buttons for arund 7-8 seconds until the Apple logo appears
-
When I put in a DVD, the mac locks up, an image from the DVD stays on the screen even when the dvd is removed. The only way to remove the image if to do a hard shutdown.
Is the hardware corrupt?Could you be a little more descriptive, does this happen with all DVDs? Please describe the type of DVDs you are attempting to use, commercial movies, blank DVDs, etc...
-
HT2490 How do I make the top tab bar stay on the screen all the time
How do I make the top bar stay on the screen all the time?
"Top tab bar"?
The top of the screen is where the applications menus appear on the left and system icons (time, volume. etc) appear on the right side.
This entire area is "covered over" when you enter into "Full Screen" mode. You can expose it while still in full screen by moving your cursor over the area. -
I used utilities to source my 10.6 snow leopard install disc to my main hardrive, and now when I turn on my computer the apple with the spinning wheel stays on the screen and stuck like that. How do I fix it Help please. I already tried all the commands such as Command R, Holding down the Option key, C and holding down shift at the start up but nothing happens.
initialy All I was trying to do was downgrade 10.7 to 10.6 .You have to consider the possibility the hard drive may be dying. If your data isn't backed up, try one of the tools below:
https://discussions.apple.com/docs/DOC-1689
Once you are sure your data is backed up, we can examine other possibilities. In the meantime call AppleCare for your original installation DVDs. You may need them. -
How can I get an inserted video (FLV) in Presenter 7 to stay on the screen once it has finished playing? Right now it disappears once it is done. I'd like it to remain on the screen, or loop if possible, until the user manually moves the presentation forward.
Hi,
You may set the slide setting as 'Advance by user'.
So,
a. Insert flv on a slide.
b. On presenter ribbon goto Slide Manager .
c. Select the slide on which flv is inserted and set Advance by user 'Yes'
Hope this solves your purpose.
Thanks,
Alpi -
So, i just got my iPod touch and i plugged it into my computer and it wont show up on itunes. Plus, it stays at the screen where it says to plug it in.: someone please help!!!!!!!!!
http://support.apple.com/kb/TS1538
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again. -
I was asked to download iOS on my ipad3 which the completed automatically but instead iTune with a plug-in icon came up on the screen. SInce then I can't operate the ipad3 even after I switch off and on again. That icon just monopolize the screen ! What shall I do now? Please help.
Try and put your iPad in recovery mode
http://support.apple.com/kb/ht1808 -
There are no details about which version the update applies to.
I cannot be sure that this is not a scam so I have not uploaded it. The fact that the box stays on the screen for only a few seconds, before the regular Firefox screen opens, suggests that the box wants the user to make a quick, uniformed, decision, and to press "Next" rather than find out about the changes.Did you ever install a Firefox 4 beta (or RC) version in the past?
It is possible that you are still on the beta update channel if you ever installed a Firefox 4 beta version or a release candidate.<br />
You can check that by looking at the pref <b>app.update.channel</b> on the about:config page.<br />
If the value of that pref is beta then it is better to download and install the latest Firefox 4.0.x release.<br />
You can find the latest Firefox 4.0.x on this site:
* http://www.mozilla.com/en-US/firefox/all.html -
A sad or unhappy iPod icon appears on the screen
I have had my ipod mini f0r 2 month A sad or unhappy iPod icon appears on the screen and the hard drive is making sounds when turn on
You could try restoring the iPod, but quite honestly it sounds like a bad hard drive and it needs service.
See: What does this icon mean? -
second generation ipod and now when I turn it stays on the screen where it says the date and time and try to log in to use it and I can not to do.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
. Place the iOS device in Recovery Mode if necessary to allow the restore.
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My itouch won't turn on. All that shows is the apple icon and then the screen goes blue to white. Is there a way to fix this or is my itouch unfixable? HELP ME!!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Adobe Master Colection CS5 error 7
My windows 8.1 pro When i try to instal a have error 7 Exit Code: 7 -------------------------------------- Summary -------------------------------------- - 1 fatal error(s), 2 error(s), 34 warning(s) WARNING: Display requirements not met for {1BBD8D7
-
Need help in deleting multiple tables
Hi, In one of my scenario i want to delete One record from the table, but there are some child and sub child exist for the table. And the on delete cascade is not set fro any of the table. Structure of my table, Table-1 tab1_pk tab1_name Table-2 tab2
-
Master detail without foreign key
Hi. I would like to know whether it is possible in JDeveloper to have a master-detail form for two tables that do not have a phisical foreign key constraint (they do have a logical one, though)? I tried creating an Association between the two Entitie
-
POA SP3 and Data Synchroniser 1.2.3 Build 882
Hi All, Last week we updated to Groupwise 8 SP3, running on Netware 6.5 with no issues. Since that update we have had major issues with Data Synchroniser 1.2.3 Build 882. Every 2 to 5 hours all the IOS devices ( we only use IOS devices) will throw up
-
How do I get a movie from iMovie 10 to iDVD to burn a disc
How do I get a movie from iMovie 10 to iDVD to burn a disc?