Lock iphone screen with apple logo
My iphone screen is lock and it displays the apple log and won't turn off.
My 3Gs did the same thing this last week - I thought it was a goner, but after it completely discharged, I was able to restore it using iTunes.
Maybe this will help, maybe not. It is a difficult thing to show patience with this device!
Similar Messages
-
i bought iphone 5s 2 days ago and suddenly it turn off and start again till the white screen with apple logo and start again
please answer me as soon as possibleHello Ahmedabokamar,
Thanks for the question! I'd recommend taking a look at the following article for troubleshooting steps that can help get your iPhone working again.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Allen -
Iphone 5 got wet last week. Been in rice until today. It turned on and worked fine, I could see a water spot in the middle but still worked fine, 3 hours in it shut down to the black screen with apple logo. Screen stays up for 10 seconds ago and then goes black and then black screen with apple logo comes back. Any ideas what to do?
At this point it's likely that the iPhone has suffered damage and you'll have to take or send it to Apple for replacement. If you have AppleCare+ coverage on the iPhone, the cost will be US $49. Otherwise the cost will be US $229.
Regards. -
4s bricked after trying new update, stuck with black screen with apple logo how can i fix this
Update bricked my 4s
phone , stuck with black screen with apple logo ..
how can I fix thisGreetings r1042,
Welcome to the Apple Support Communities!
I understand that your iPhone is not booting up past the Apple logo. In this situation, I would recommend working through the troubleshooting steps located in the attached article.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
If your device gets stuck during startup
When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
Have a great day,
Joe -
my brothers girlfriend gave me her old iPhone. the last thing she did to the working phone was to wipe it to erase all her private info. however instad of booting up like normal, all i get is a black screen with apple logo. ive forced a reboot and it goes to same screen. sometimes it will turn off and reboot by itself, and occasionally it wil give a low battery icon, and it will show it charging for a few min then go back to black screen with Appple logo. any ideas anyone?
Try to charge it for about 10min using th adapter, then connect to your computer in recovery mode, explained here: iOS: Unable to restore
-
ITunes Store wont open. Only thing appears is the white screen with Apple Logo
iTunes Store won't opeen. Only thing appears is white screen with Apple Logo and takes really, really long to load.
Hi Davin12,
I'm sorry to hear you are having issues acessing the iTunes Store from your Windows computer.
The article below may be able to help you with this issue.
Click on the link below to see more details and screenshots.
I've quoted some helpful highlights for you:
iTunes for Windows: iTunes Store connection troubleshooting
Remove pop-up blockers
Some pop-up or ad-blocking programs may interfere with the ability of iTunes to connect to the iTunes Store. Removing them in many cases will resolve the issue.
Flush DNS Setting in Windows
In some cases, the DNS information you computer uses to connect to the Internet needs to be reset. Follow these instructions to flush your Windows DNS information:
Windows XP
On the Start menu, click Run.
In the Open field type cmd and click OK.
In the resulting window, type ipconfig /flushdns and press Return on the keyboard.
You should see a message that the DNS Resolver Cache has been successfully flushed.
Windows Vista and Windows 7
On the Start menu, point to All Programs > Accessories and then right-click Command Prompt and chooseRun as Administrator from the shortcut menu. If Windows needs your permission to continue, click Continue.
In the resulting window, type ipconfig /flushdns and press Return on the keyboard.
You should see a message that the DNS Resolver Cache has been successfully flushed.
Note: If, in the command prompt, you see this message: "The requested operation requires elevation", close the command prompt and repeat steps 1 and 2 above to be sure that Administrator privileges are used to access to Command Prompt.
The article below will help you troubleshoot the issue from your computer or your iPod Touch:
iTunes: Advanced iTunes Store troubleshooting
I hope this information helps ....
Have a great day!
- Judy -
ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?
Let the battery fully darain. After charging for an least an hour try a reset and restore. Use Recovery mode if necessary.
If not successful, then time for an appointment at the Genius Bar of an Apple store. -
I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
When turning on my mac book pro it displays a screen with apple logo and begins loading a loading bar, after this continues to show loading circle however has been like this all day still no different. Tried turning it on and off however still same!
... then run Disk Utility, Repair Disk.
Also:
Resolve startup issues and perform disk maintenance with Disk ...
Mac troubleshooting FAQ: start-up woes
How To Fix Common Mac Startup Problems
Mac Stalls on Gray Screen at Startup - Troubleshooting Mac Startup ... -
I have snow leopard installed as an OS. When trying to reboot a MacBook Pro I am getting stuck on grey screen with apple logo and rotating symbol. What can I do?
Maybe this might help.
http://support.apple.com/kb/TS2570 -
Imac does not start white screen with apple logo.......
Hi guys, my brand new Imac 21.5 got stuck on the white screen with apple logo and nonstop little wheel, but it never gets out of it....Disconnected everything else restarted but still nothing...stuck at the same screen. Please i need help, the machine is only 3 months old!!!
Hi, do you have AppleCare?
Call AppleHelp in any event 1-800-275-2273
You could try booting from your discs (Disc#1) that came with your Mac -
...L -
I get a white screen with apple logo and progress bar on my imac mavericks
I get a white screen with apple logo and progress bar ,then computer shuts down
when I turn my imac back on same thing happens,every time same thing
pprogress bar only goes half way then computer shut down
is there a solution ?
if not is there a way to at least salvage some files and docs?
i Have the latest imac 27Thanks I tried it but after I repaired my disk via disk utility at start up, it told me that
my disk can't be repaired and to try to back up my files so I can format it
but is there to back up my files?
also what I get is white screen with the progress bar not grey -
is anbody there how does this work never done it before my macbook won't start past white screen with apple logo any ideas ?
Are you using a 10.6 Snow Leopard Install DVD? If yes, you can erase and install following these directions: http://support.apple.com/kb/HT3910
You'll know whether or not it is a hard drive issue when you get to step 8 under "Part One: Erasing the hard drive". If you do not see your hard drive in the list on the left side of the Disk Utility window then you know the Mac isn't seeing it—could be a loose cable, but more likely hard drive failure.
If you can see it on the left, click on it and look at the bottom of the Disk Utility window. If you see something like "S.M.A.R.T status: failing" that is definitely a hard drive issue. Otherwise, you can just follow the directions for an erase and install!
Might be worth fixing depending how much a repair would cost. Genius Bar could at least diagnose it for you and give a repair estimate. I'd look at what a new or refurbished one with your same specs would cost though to see if the price differential is worth it... -
Mac book pro is unable to display desktop ,only white screen with apple logo is appearing
Hi
I have a Mac book pro, since today morning the Mac book pro is not starting. It just displays the white screen with Apple logo and search signal. Despite waiting for a long time desktop is not coming up.
I have tried to restart it several time but the status remains same. Kindly help.
Thank you
Kind regards
satishGray, Blue or White screen at boot, w/spinner/progress bar
-
White screen with Apple logo/ not booting
I recently tried to install the software for the "Flip" video camcorder and upon restarting my computer after installation, my computer is stuck on the white screen with Apple Logo, 'thinking" wheel spinning, and fans going full blast. I tried forcing a stop with turning computer off by holding power button in the back until system powered off. When I started the computer back up, it did the same thing.
What is the likely problem and how do I fix this. I bought the computer used and do not have the OS X software that comes with the computer originally.You really need those discs. You can either buy a BLACK retail version of Leopard and use that or you can call Apple at 800-767-2775 and for a nominal fee they will send you the proper discs for your model. You will need the serial number, which you can find on the bottom of the foot of your computer. Do not buy any grey discs, they are machine specific and will not work on yours. In the meantime, try starting by resetting the PRAM and the SMU
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Press and hold the power button for 5 seconds.
4. Release the power button.
5. Attach the computers power cable.
6. Press the power button to turn on the computer.
You need to make sure also, that the software that comes with your Flip is compatible with the OS version you are running.
Let us know how you make out,
Maybe you are looking for
-
Is there a size limit of the mp4 transfer to Ipod?
Hi, i have converted a video and the size is 640x480. It worked just fine for itune and quicktime player, but when i start to transfer it to my ipod video. It declines my mp4 video and said it's different format. Again i did the same thing and conver
-
Hello, We get following error on a controller when certain ap tries to join it. The primary controller has management address on vlan 7 ( includes both vlan 7 & 8 in subnet) - 10.58.8.21. *spamApTask2: a8:b0:e9:50:2c:00 CAPWAP Control Msg Received
-
At work we have applications that are certified to run under XP. I'm still undecided whether to get XP or 7 for my new Mac mini. So: how does the XP mode run under 7 Pro via Boot Camp?
-
Photoshop Generate image assets
When I try to generate an asset from a Ps layer in a subfolder like in the example [subfolder]/Ellipse_4.jpg , it generate an error txt message: So why doesn't Ps accept the "/" character ? Thanks for any help. Victor
-
Hello! Got a small question. I currently have a premium account and I want to make calls to Japan. In the prices section for premium, I see it has unlimited calls to landlines for Japan. I'm just wondering, will I still need to buy the Unlimited Japa