Lock Keyboard-Mouse of remote machine...???

Hi all,
I am developing client-server application in java with socket programming. I want to know that, is there any possibililty to lock keyboard-mouse of client machine from server???
Actually, I want to lock keyboard and mouse of client machine and at that I also want to display a message on the screen of that client machine.
If it is possible, then can you explain me how can I achieve that..???
Thanks in advance,
JSF GEEKS
Edited by: jsfgeeks on Feb 21, 2009 11:38 AM

Actually, I want to lock keyboard and mouse of client machine FLAME MODE on
Don't you want that all money on the client's account be transferred to yours?
FLAME MODE off

Similar Messages

Lock keyboard & Mouse

The lock keyboard and mouse option is not available when I am remote
controlling users PCs . All the correct options are turned on . Any one
any ideas? Thanks for any replies.

You did not give much detail, so I will just review a couple
things.............
1) Normally this is set via a Remote Control Policy. Check both User and WS
Remote Control policies to make sure neither prohibits this.
2) If the workstations are not imported, there is an INI file in the Agent
directory on the PC that controls this.
(I don't recall off the top of my head, but if you need help with this let
me know. I use this method for one client.)
Craig Wilson
Novell Product Support Forum Sysop
Master CNE, MCSE 2003, CCNA
Editor - http://www.ithowto.com
(Seeking Full-Time Expert? Drop me a note :> )
<[email protected]> wrote in message
news:rls2f.5435$[email protected]..
> The lock keyboard and mouse option is not available when I am remote
> controlling users PCs . All the correct options are turned on . Any one
> any ideas? Thanks for any replies.

Multiple USB inputs - Keyboard/Mouse, Novation Remote, and Mackie MUC Pro

Im running a Macbook Pro, 10.4 with Logic 8. I just got a Mackie Universal Controller Pro and also use a Novation Remote 49. Ive got an additional 20" screen, with the USB inputs as well.
Im trying to hook up:
- External keyboard and mouse
- Mackie Universal Control Pro
- Novation Remote
If I plug in the Mackie and the Novation directly to the laptop, everything works. Of course, this then doesnt allow me to plug in the keyboard/mouse as there are only 2 usb ports on the laptop.
Since Im using the external screen, I have the additional usb inputs on there. So, I plug either the mackie or the novation into one of the usb ports, and then the screen/aux cables into the other. Then I plug the other controller into the screen.
With this configuration - one of the controllers wont be recognized. I generally get a message about reassigning or not reassigning them as well.
Regardless of which I choose, the second controller wont come up. Using the midi preferences and controller parameters within Logic doesnt seem to do much either.
Whats the work around here? If I get a multi USB hub, will this fix it? Im wondering why daisy chaining these pieces doesnt allow the midi to be properly routed or recognized.
Hopefully this makes sense and someone has the solution! Thanks.

Hey - Thanks for the quick response.
'Why don't you leave the controllers connected directly to the computer, and connect your keyboard/mouse to the screen's USB ports?"
Problem is - there are only two USB ports on the compute. In order for the external displays USB port to work, it has to be plugged in to the computer via USB as well. I have the mouse plugged in to the qwerty keyboard, but they both need to be plugged in to a USB port somewhere regardless.
Am I missing something?
It seems like the problem is really trying to plug an external controller in to an apple displays USB port (so that could be a power issue, although the Mackie is self powered, or just general connectivity).
Based on the above, suggestions?

Cannot lock keyboard/mouse or blank screen

I've probably missed somthing obvious, but when I am remote controlling a
machine, the options to lock out keyboard and mouse, and blank screen are
greyed out. The policy has been set to allow it, and I have admin rights
from tree root down. Its an all XP environment, with zen 6.5 on netware 6.5.
Any ideas?

On Thu, 15 Dec 2005 17:01:23 GMT, H Mackay wrote:
> The policy has been set to allow it
user and wks policy if you have both?
wks rebootet?
screen blanking depends on the graphic cards, it could be that it will not
work at all
Marcus Breiden
If you are asked to email me information please change -- to - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

FCS Locks up on remote machines....

I just wanted to check and see if anyone else had the issue of Final Cut Server locking up on remote machines? It launches....searches for about 7 seconds and then...locks up. Its just started a few months ago and it is driving me crazy. Is it just me?

Hi there,
I had a similar issue. First my FCSrv client didn`t list assets and a spinning wheel that kept spinning.
Then after some trial it stopped even from entering in the WorkPlace. It hang on the splash screen:
http://discussions.apple.com/thread.jspa?threadID=1875158
I`ve asked here but unfortunately no one answered.
To "solve" this I had to re-install (a fresh) FCSrv.
Before you try that:
I really don`t remember but there`s a script inside /Library/Application\ Support/Final\ Cut\ Server/Final\ Cut\ Server.bundle with the name "dump" or "clean" that I had solved other issues.
I think that you could try to look at this before re-installing.
Good Luck!
Regards

Keyboard-mouse locked after resume from suspend

After the last couple of system updates my system no longer resumes properly from suspend. The video is fine but the keyboard-mouse combo is locked up.
The kb-mouse combo is a logitech wireless:
Bus 001 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
I can see no relevant log details in systemctl that lead me anywhere. Any ideas appreciated.

I don't know if this is the same bug. I'm using openbox and a desktop computer without any touchpad. After being suspended, my mouse somehow rules all of my desktop - whole screen is flattering, and moving mouse changes the size of the visible, flashing window. Moving cursor to the top of the screen "locks" the window, and everything except mouse cursor is perfectly normal. Cursor is waving and flashing bunch of pixels, from the right side of the screen to the current location of the mouse cursor. I can use the mouse, and cursor is in right location. Ctrl+Alt+F2 visiting to tty2 and coming back fixes the situation, so I can use computer just fine, but it's still quite uncomfortable. Sounds quite strange, I think?

Locking keyboard and mouse with screen still visible?

Kids are nice but can be a real bugger near computers.
*Does anyone know of a way to lock the keyboard and mouse but with the screen still visible?*
I'm using my MacPowerbookPro to play music at home and would like to see whats playing without my kids changing tracks, applications and god knows what more.
It feels like this is a funcion that should be included in the system but I have googled the topic without success.
Anyone?
Apple?
/partho

partho wrote:
Kids are nice but can be a real bugger near computers.
*Does anyone know of a way to lock the keyboard and mouse but with the screen still visible?*
I'm using my MacPowerbookPro to play music at home and would like to see whats playing without my kids changing tracks, applications and god knows what more.
It feels like this is a funcion that should be included in the system but I have googled the topic without success.
Anyone?
Apple?
/partho
In Keyboard & Mouse, under Keyboard Shortcuts there is a listing for "Turn full keyboard access on or off" but it doesn't seem to do anything on my computer.
A quick search turned this up
http://mac.softpedia.com/get/Utilities/Victor.shtml
Message was edited by: nerowolfe

Using powerbook keyboard/mouse to interact with imac

i have seen similar questions to this, but nothing exactly like what i am doing.
my problem is as follows...
i have an imac (2009 edition) hooked up to my television. the imac is in a bedroom and the tv is in the living room, so whenever i want to switch what is being sent to the tv, i have to go into the bedroom to do it. one solution to this would be to buy a wireless keyboard and mouse (easy enough). what i am wondering, however, is if it is possible to use my powerbook, which sits on the coffee table in the living room, to control the imac. i dont need to see the screen of the imac since it is on the tv in front of me, i just need the key strokes i hit to register on the imac, and the mouse movements to apply to the imac and not my powerbook.
i have read suggestions about using synergy, which allows one keyboard and mouse to control two computers. this could be what i want, but i want the powerbook control over the imac to be temporary, so that when i am in the bedroom, controlling the imac, i can use the imac keyboard and mouse.
does anyone have any experience with this or ideas of what i should do. it would be nice to re-use my powerbook and save $100 by not getting a wireless keyboard/mouse.
thanks!

It would need to be running Leopard, yes - and the iMac disk will be machine-specific and won't work. You can still, however, use VNC, which is the basis for Screen Sharing. On the iMac, go back to Sharing, Remote Management, Computer Settings, and tick and set a password for "VNC viewers".
Then, on the laptop, install Chicken of the VNC, launch it and locate your computer in the Open Connection dialog. You may need to add its address manually. Enter the VNC password, and you will be able to control the iMac.
Matt

Since upgrading to OSX 10.6.8, I am unable to use scp on a remote machine to copy files into my iMac.

Any suggestions?
However, I can use scp to copy files out from my iMac (10.6.8) .
I can ssh into the iMac OK.
I created a .profile in my iMac home directory with the single line "export TERM=xterm-color".
This makes a difference to how scp behaves when attempting to copy into the iMac, but it still fails.
Thanks in advance for any help. Peter R
Here is the scp debug output (on the remote machine that I'm copying a file from, to the iMac):
===
Executing: program /usr/bin/ssh host molika.ucsd.edu, user prowat, command scp -v -t Desktop/FromPelican/Outs201201.pdf
Sun_SSH_1.1.3, SSH protocols 1.5/2.0, OpenSSL 0x0090704f
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Rhosts Authentication disabled, originating port will not be trusted.
debug1: ssh_connect: needpriv 0
debug1: Connecting to molika.ucsd.edu [137.110.243.133] port 22.
debug1: Connection established.
debug1: identity file /home/nona/.ssh/identity type -1
debug1: identity file /home/nona/.ssh/id_rsa type -1
debug1: identity file /home/nona/.ssh/id_dsa type -1
debug1: Remote protocol version 1.99, remote software version OpenSSH_5.2
debug1: match: OpenSSH_5.2 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-Sun_SSH_1.1.3
debug1: use_engine is 'yes'
debug1: pkcs11 engine initialized, now setting it as default for RSA, DSA, and symmetric ciphers
debug1: pkcs11 engine initialization complete
debug1: Failed to acquire GSS-API credentials for any mechanisms (No credentials were supplied, or the credentials were unavailable or inaccessible
Unknown code 0
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client aes128-ctr hmac-md5 none
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: Peer sent proposed langtags, ctos:
debug1: Peer sent proposed langtags, stoc:
debug1: We proposed langtags, ctos: i-default
debug1: We proposed langtags, stoc: i-default
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: dh_gen_key: priv key bits set: 124/256
debug1: bits set: 1007/2048
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Host 'molika.ucsd.edu' is known and matches the RSA host key.
debug1: Found key in /home/nona/.ssh/known_hosts:1
debug1: bits set: 1043/2048
debug1: ssh_rsa_verify: signature correct
debug1: newkeys: mode 1
debug1: set_newkeys: setting new keys for 'out' mode
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: newkeys: mode 0
debug1: set_newkeys: setting new keys for 'in' mode
debug1: SSH2_MSG_NEWKEYS received
debug1: done: ssh_kex2.
debug1: send SSH2_MSG_SERVICE_REQUEST
debug1: got SSH2_MSG_SERVICE_ACCEPT
debug1: Authentications that can continue: publickey,keyboard-interactive
debug1: Next authentication method: publickey
debug1: Trying private key: /home/nona/.ssh/identity
debug1: Trying private key: /home/nona/.ssh/id_rsa
debug1: Trying private key: /home/nona/.ssh/id_dsa
debug1: Next authentication method: keyboard-interactive
*** Password requested & supplied
debug1: Authentication succeeded (keyboard-interactive)
debug1: fd 5 setting O_NONBLOCK
debug1: fd 6 setting O_NONBLOCK
debug1: fd 7 setting O_NONBLOCK
debug1: channel 0: new [client-session]
debug1: send channel open 0
debug1: Entering interactive session.
debug1: ssh_session2_setup: id 0
debug1: channel request 0: env
debug1: Sending command: scp -v -t Desktop/FromPelican/Outs201201.pdf
debug1: channel request 0: exec
debug1: channel 0: open confirm rwindow 0 rmax 32768
~
debug1: channel 0: read<=0 rfd 5 len 0
debug1: channel 0: read failed
debug1: channel 0: close_read
debug1: channel 0: input open -> drain
debug1: channel 0: ibuf empty
debug1: channel 0: send eof
debug1: channel 0: input drain -> closed
debug1: channel 0: write failed
debug1: channel 0: close_write
debug1: channel 0: output open -> closed
debug1: channel 0: rcvd eof
debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
debug1: channel 0: rcvd close
debug1: channel 0: almost dead
debug1: channel 0: gc: notify user
debug1: channel 0: gc: user detached
debug1: channel 0: send close
debug1: channel 0: is dead
debug1: channel 0: garbage collecting
debug1: channel_free: channel 0: client-session, nchannels 1
debug1: fd 0 clearing O_NONBLOCK
debug1: fd 1 clearing O_NONBLOCK
debug1: fd 2 clearing O_NONBLOCK
debug1: Transferred: stdin 0, stdout 0, stderr 0 bytes in 0.9 seconds
debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 0.0
debug1: Exit status 0

On looking at the secure.log on the iMac with OSX10.6.8, I see these entries at each attempt to scp into the iMac:
Dec 29 11:06:20 molika sshd[7248]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Dec 29 11:06:26 molika sshd[7246]: Accepted keyboard-interactive/pam for prowat from 137.110.243.132 port 35571 ssh2
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 created
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 attributes 0x20
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 dead
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Killing auth hosts
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 destroyed
I don't know what to make of this.
Peter R

Don't want random keyboard & mouse events to wake from sleep

is there any way to prevent a random keyboard press or mouse movement from waking up the computer? a terminal setting or something? ideally, i'd just like to use the power button to do this--or at the very least to completely disable the mouse's ability to wake the machine, and specify a certain key or something.
seems like an obvious setting that's missing...or that i'm overlooking...?
thanks!
various Macs Mac OS X (10.4.8)

markhimself wrote:
Is there any way to disable the mouse from waking from sleep mode? Additionally, can you disable the mouse from waking the display from display sleep only? And is this done the same way?
Thanks.
If it's a BlueTooth mouse you can uncheck the option in the Keyboard & Mouse preferences.

Keyboard, mouse, usb, bluetooth stop working, computer freezes

I have a 2009 MacBook Air. Over the weekend, out of nowhere, the computer froze up where the keyboard and mouse would not work. Plugging in a USB device and/or trying to use a previously paird BT device also failed.
I was, however, able to remotely access the computer since I had previously set it up with LogMeIn. By doing this, the computer had full functionality but external peripherals were not recognized.
Using the remote session, I was able to fire off a backup and send it to a network drive (which was an overnight task, but at least I still have the latest data).
I took it to the apple store and, upon starting it up, all worked fine! We restarted it at the genius bar and the problem occurred again. When the logon screen appeared, the mouse and keyboard were unrespnosive. Restarting holding down any optoin+Key combos did nothing because they keyboard was not being recognized.
Then we restarted again and it worked.
So, basically, the problem is interemittent. They offered the repair depot flat fee cost of $280 that would fix the unit no matter what part(s) had to replaced. It's looking more and more like a logic board issue, but it doesn't make sense that it's only some of the time and others it works fine. So I took it home to try a few more things.
I was able to get it started up using command R and did a full disk erase, followed by a Mountain Lion re-install. I also did a NVRAM reset. That seemed to work for a few minutes, but then it froze up again, although Mountain Lion kept running the install. Once the install finished, I force shut down the unit and started it up again and the keyboard/mouse were working again.
I plugged in an external USB drive, configured bluetooth and started restoring files. It worked for a full day and then the next morning, it happened again. At this point, the keyboard/mouse froze, the bluetooth devices became disconnected and the USB drive dropped - all at the same time.
So, a full reinstall of the OS didn't work (I was somehow hoping this was software related).
Any other thoughts? Should I bite the bullet and just do the flat fee repair?

HI,
Try resetting the SMC, instructions here. http://support.apple.com/kb/HT1543
Try resetting the PRAM/NVRAM, instructions here. http://support.apple.com/kb/HT1379
Try deleting this file. com.apple.bluetooth.plist /Users/YourName/Library/Preferences. Drag that file from the Preferences folder to the Trash, empty the Trash and reboot.
Hopefully something will help.
Carolyn

X100e keyboard/mouse issues

Hi Folks,
I've been having trouble with my recently purchased x100e (running Windows 7), and I'm hoping that someone may be able to help me out. I've been looking through the forums and on the web for solutions, but no luck.
Starting a few days ago, I notice that whenever I press a button on the keyboard, a dialog box pops up to ask me if I want to display the Trackpoint Guide. This prevents me from typing anything longer than one keystroke, because the dialog box just comes back when I hit the next key regardless of pressing "Yes" or "No." Additionally, whenever I press a key, the cursor changes from the standard pointer to the scroll icon that would display if I was pressing the middle mouse/scroll button above the trackpad. Furthermore, the middle mouse/scroll button above the trackpad no longer works when pressed.
I have noticed that it is possible to disable the Trackpoint dialog box from coming up by clicking the "do not display this message" option, but the cursor issue persists no matter what. The laptop is hardly a month old. I use antivirus, anti-spyware, etc. I have tried updating the mouse/trackpoint driver and also rolling it back to the originally installed driver, but neither step seems to resolve the issue. I thought that perhaps I had inadvertently changed some of the mouse settings, so I did a factory reset on the machine. Unfortunately, that didn't solve the issue either. I did an extra factory reset just to make sure. I've run anti-virus and anti-malware scans to see if anything would show up, but nothing does. This one really has me perplexed. If there's anyone out there who could offer any advice, I'd really appreciate it.
Thanks!

Hi onlylive2x,
Welcome to Lenovo Forums.
Could you try doing a factory reset without installing any antivirus or antispyware and see if there are any keyboard/mouse issues? This could be some software which is causing a conflict with the mouse drivers.
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

Keyboard/mouse variably function

My keyboard & mouse stop functioning unpredictably. Problem persists after repairing disk,permissions;also tried taping KB cable under battery, no luck. Can use USB KB & Mouse. All other functions seem OK. Machine is > 3 yrs old. Should I chuck it? Is it likely an OS problem? I also must attach USB KB to launch Windows from Bootcamp (ie. the KB won't work before Mac OS launches). Thanks for any clues, suggestions. I've had the problem intermittently for 6 months or more, but it is now more persistent.

Intel-based Apple Portables: Troubleshooting unresponsive trackpad issues
I had the bloated battery problem 9 mths ago, or so, and replaced the battery as soon as possible->*could this have damaged the KB/trackpad connection?*
It's possible if the battery was leaking.

Unable to connect to WMI (r) on remote machine "SCCMCLIENT03"

Hi!
I'm in the process of configuring the XP firewall to support the Client Push installation method that SCCM offers. At the moment I'm quite happy with the result. The SCCM client agents are installed properly on my reference machines.
To secure that the WMI functionality is up and running I have (prior to the client agent installation) run wbemtest with following parameter (from server to client, and vice versa):
\\host\root\cimv2
I successfully contacted that specific namespace on both ends. But when I trace the log I find the following error which still indicates that something is wrong:
CWmi::Connect(): ConnectServer(Namespace) failed. - 0x8004100e SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:14 1704 (0x06A8)
---> Unable to connect to WMI (r) on remote machine "SCCMCLIENT03", error = 0x8004100e. SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:14 1704 (0x06A8)
Why do I get this? What am I missing here? I got the feeling of WMI functioning the way it should.
Any hints on this one?
In an MSDN-article (http://msdn.microsoft.com/en-us/library/aa389286(VS.85).aspx) I read the following lines:
"If the user account that is on Computer A is not an administrator on Computer B, but the user account has Remote Enable permission on Computer B"
Those lines are part of an article which describes how to configure Remote administrations properly. For that to work, does the computer account of my Central Site Server has to be part of the local administrators group on every client?
Regards,
Fredrik
CCM.log
Submitted request successfully SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:13 2408 (0x0968)
Getting a new request from queue "Incoming" after 100 millisecond delay. SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:13 2408 (0x0968)
======>Begin Processing request: "TI11WDUE", machine name: "SCCMCLIENT03" SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:13 1704 (0x06A8)
---> Trying each entry in the SMS Client Remote Installation account list SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:13 1704 (0x06A8)
---> Attempting to connect to administrative share '\\SCCMCLIENT03.spost.nu\admin$' using account 'spost.nu\SA-SCCM_ClientPush' SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:13 1704 (0x06A8)
Received request: "HPS6133J" for machine name: "SCCMCLIENT02" on queue: "Incoming". SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:13 2408 (0x0968)
Stored request "HPS6133J", machine name "SCCMCLIENT02", in queue "Processing". SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:13 2408 (0x0968)
---> Connected to administrative share on machine SCCMCLIENT03.spost.nu using account 'spost.nu\SA-SCCM_ClientPush' SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:13 1704 (0x06A8)
---> Attempting to make IPC connection to share <\\SCCMCLIENT03.spost.nu\IPC$> SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:13 1704 (0x06A8)
---> Searching for SMSClientInstall.* under '\\SCCMCLIENT03.spost.nu\admin$\' SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:13 1704 (0x06A8)
---> System OS version string "5.1.2600" converted to 5,10 SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:14 1704 (0x06A8)
---> Service Pack version from machine "SCCMCLIENT03" is 3 SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:14 1704 (0x06A8)
CWmi::Connect(): ConnectServer(Namespace) failed. - 0x8004100e SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:14 1704 (0x06A8)
---> Unable to connect to WMI (r) on remote machine "SCCMCLIENT03", error = 0x8004100e. SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:14 1704 (0x06A8)
---> Creating \ VerifyingCopying exsistance of destination directory \\SCCMCLIENT03\admin$\system32\ccmsetup. SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:14 1704 (0x06A8)
---> Copying client files to \\SCCMCLIENT03\admin$\system32\ccmsetup. SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:14 1704 (0x06A8)
---> Copying file "d:\Program Files\Microsoft Configuration Manager\bin\I386\MobileClient.tcf" to "\\SCCMCLIENT03\admin$\system32\ccmsetup\MobileClient.tcf" SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:14 1704 (0x06A8)
---> Copying file "d:\Program Files\Microsoft Configuration Manager\bin\I386\ccmsetup.exe" to "\\SCCMCLIENT03\admin$\system32\ccmsetup\ccmsetup.exe" SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:14 1704 (0x06A8)
---> Created service "ccmsetup" on machine "SCCMCLIENT03". SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:15 1704 (0x06A8)
----- Started a new CCR processing thread. Thread ID is 0xc6c. There are now 2 processing threads SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:15 2408 (0x0968)
Submitted request successfully SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:15 2408 (0x0968)
Getting a new request from queue "Incoming" after 100 millisecond delay. SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:15 2408 (0x0968)
Found CCR "yb2xbq0a.CCR" in queue "Incoming". SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:15 2408 (0x0968)
======>Begin Processing request: "HPS6133J", machine name: "SCCMCLIENT02" SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:15 3180 (0x0C6C)
---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0) SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:15 3180 (0x0C6C)
---> Attempting to connect to administrative share '\\SCCMCLIENT02.spost.nu\admin$' using account 'spost.nu\SA-SCCM_ClientPush' SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:15 3180 (0x0C6C)
Received request: "YB2XBQ0A" for machine name: "SCCMCLIENT01" on queue: "Incoming". SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:15 2408 (0x0968)
Stored request "YB2XBQ0A", machine name "SCCMCLIENT01", in queue "Processing". SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:15 2408 (0x0968)
---> Started service "ccmsetup" on machine "SCCMCLIENT03". SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:16 1704 (0x06A8)
---> Deleting SMS Client Install Lock File '\\SCCMCLIENT03.spost.nu\admin$\SMSClientInstall.S01' SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:16 1704 (0x06A8)
---> Completed request "TI11WDUE", machine name "SCCMCLIENT03". SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:16 1704 (0x06A8)
Deleted request "TI11WDUE", machine name "SCCMCLIENT03" SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:16 1704 (0x06A8)
<======End request: "TI11WDUE", machine name: "SCCMCLIENT03". SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:16 1704 (0x06A8)
======>Begin Processing request: "YB2XBQ0A", machine name: "SCCMCLIENT01" SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:16 1704 (0x06A8)
---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0) SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:16 1704 (0x06A8)
---> Attempting to connect to administrative share '\\SCCMCLIENT01.spost.nu\admin$' using account 'spost.nu\SA-SCCM_ClientPush' SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:16 1704 (0x06A8)
Submitted request successfully SMS_CLIENT_CONFIG_MANAGER 2009-03-10 11:12:17 2408 (0x0968)

Here is what is in my ccmsetup.log
<![LOG[GetSSLCertificateContext failed with error 0x87d00280]LOG]!><time="16:19:22.341+240" date="04-04-2012" component="ccmsetup" context="" type="3" thread="984" file="ccmsetup.cpp:5356">
<![LOG[GetHttpRequestObjects failed for verb: 'GET', url: 'HTTPS://TEST-SCCM.copt.local/CCM_Client/ccmsetup.cab']LOG]!><time="16:19:22.341+240" date="04-04-2012" component="ccmsetup" context="" type="3" thread="984" file="httphelper.cpp:942">
<![LOG[DownloadFileByWinHTTP failed with error 0x87d00280]LOG]!><time="16:19:22.341+240" date="04-04-2012" component="ccmsetup" context="" type="3" thread="984" file="httphelper.cpp:1076">
<![LOG[CcmSetup failed with error code 0x87d00280]LOG]!><time="16:19:22.341+240" date="04-04-2012" component="ccmsetup" context="" type="1" thread="3496" file="ccmsetup.cpp:9454">
And in my ccm.log:
---> Attempting to connect to administrative share '\\SCCMCLIENTTEST1\admin$' using account 'corporate\sccmadmin'~ $$<SMS_CLIENT_CONFIG_MANAGER><04-04-2012 16:09:19.338+240><thread=2708 (0xA94)>
---> The 'best-shot' account has now succeeded 1 times and failed 0 times. $$<SMS_CLIENT_CONFIG_MANAGER><04-04-2012 16:09:19.400+240><thread=2708 (0xA94)>
---> Connected to administrative share on machine SCCMCLIENTTEST1 using account 'corporate\sccmadmin'~ $$<SMS_CLIENT_CONFIG_MANAGER><04-04-2012 16:09:19.400+240><thread=2708 (0xA94)>
---> Attempting to make IPC connection to share <\\SCCMCLIENTTEST1\IPC$> ~ $$<SMS_CLIENT_CONFIG_MANAGER><04-04-2012 16:09:19.400+240><thread=2708 (0xA94)>
---> Searching for SMSClientInstall.* under '\\SCCMCLIENTTEST1\admin$\'~ $$<SMS_CLIENT_CONFIG_MANAGER><04-04-2012 16:09:19.405+240><thread=2708 (0xA94)>
---> System OS version string "6.1.7601" converted to 6.10 $$<SMS_CLIENT_CONFIG_MANAGER><04-04-2012 16:09:19.778+240><thread=2708 (0xA94)>
CWmi::Connect(): ConnectServer(Namespace) failed. - 0x8004100e~ $$<SMS_CLIENT_CONFIG_MANAGER><04-04-2012 16:09:19.826+240><thread=2708 (0xA94)>
---> Unable to connect to WMI (root\ccm) on remote machine "SCCMCLIENTTEST1", error = 0x8004100e

IBM DB2 9.7 Express-C instalation on remote machine

Hi guys,
I'm trying to install IBM DB2 9.7 Express-C on a remote machine that does not have xorg installed.
I've managed to enable forwarding X over ssh (tested on xeyes), but when i start db2setup, it doesn't do anything.
Output in console is this:
user@remotemachine$ ./db2setup
DBI1190I db2setup is preparing the DB2 Setup wizard which will guide
you through the program setup process. Please wait.
DBI1160I Non-root install is being performed.
If i login with root then the output is basically same:
user@remotemachine$./db2setup
DBI1190I db2setup is preparing the DB2 Setup wizard which will guide
you through the program setup process. Please wait.
I'm running latest arch with xfce4 with slim for starting DE.
Can anybody give me some poiners on how to install this?

spendzo wrote:Can anyone comment if this is ok...?
Yeah, it's great! I've tested it for you and I'm keeping it.:D Made some small adjustments. Thanks!
#!/bin/bash
# /etc/rc.d/db2d
# Run-level Startup script for the DB2 Databsse
export DB_USER=db2inst1
if [ -f /home/db2inst1/sqllib/db2profile ]; then
. /home/db2inst1/sqllib/db2profile
fi
case "$1" in
start)
echo "" >> /var/log/db2.log
echo "----------------------------------------------------" >> /var/log/db2.log
echo "----------------------------------------------------" >> /var/log/db2.log
echo "Starting DB2 Database: " >> /var/log/db2.log
echo "----------------------------------------------------" >> /var/log/db2.log
date +"! %T %a %D : Starting DB2 Database" >> /var/log/db2.log
echo "----------------------------------------------------" >> /var/log/db2.log
echo "Starting DB2 Database: " >> /var/log/db2.log
su $DB_USER -c "$DB2DIR/bin/db2 db2start" >> /var/log/db2.log
su $DB_USER -c "$DB2DIR/bin/db2 activate db sample" >> /var/log/db2.log
echo "Done." >> /var/log/db2.log
echo "" >> /var/log/db2.log
echo "----------------------------------------------------" >> /var/log/db2.log
date +"! %T %a %D : Start completed." >> /var/log/db2.log
echo "----------------------------------------------------" >> /var/log/db2.log
touch /var/lock/db2d
echo "OK"
stop)
echo "Shutting Down DB2 Database:" >> /var/log/db2.log
echo "----------------------------------------------------" >> /var/log/db2.log
date +"! %T %a %D : Shutting Down DB2 Databases" >> /var/log/db2.log
echo "----------------------------------------------------" >> /var/log/db2.log
echo "Shutting Down DB2 Database: " >> /var/log/db2.log
su $DB_USER -c "$DB2DIR/bin/db2 deactivate db sample" >> /var/log/db2.log
su $DB_USER -c "$DB2DIR/bin/db2 db2stop force" >> /var/log/db2.log
echo "Done." >> /var/log/db2.log
echo "" >> /var/log/db2.log
echo "----------------------------------------------------" >> /var/log/db2.log
date +"! %T %a %D : Shutdown completed." >> /var/log/db2.log
echo "----------------------------------------------------" >> /var/log/db2.log
rm -f /var/lock/db2d
echo "OK"
reload|restart)
echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" >> /var/log/db2.log
echo "DB2 Restart Initiated... " >> /var/log/db2.log
echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" >> /var/log/db2.log
$0 stop
$0 start
echo "Usage: `basename $0` start|stop|restart|reload"
exit 1
esac
exit 0

Lock Keyboard-Mouse of remote machine...???

Similar Messages

Maybe you are looking for