Lock keyboard & Mouse

The lock keyboard and mouse option is not available when I am remote
controlling users PCs . All the correct options are turned on . Any one
any ideas? Thanks for any replies.

You did not give much detail, so I will just review a couple
things.............
1) Normally this is set via a Remote Control Policy. Check both User and WS
Remote Control policies to make sure neither prohibits this.
2) If the workstations are not imported, there is an INI file in the Agent
directory on the PC that controls this.
(I don't recall off the top of my head, but if you need help with this let
me know. I use this method for one client.)
Craig Wilson
Novell Product Support Forum Sysop
Master CNE, MCSE 2003, CCNA
Editor - http://www.ithowto.com
(Seeking Full-Time Expert? Drop me a note :> )
<[email protected]> wrote in message
news:rls2f.5435$[email protected]..
> The lock keyboard and mouse option is not available when I am remote
> controlling users PCs . All the correct options are turned on . Any one
> any ideas? Thanks for any replies.

Similar Messages

Lock Keyboard-Mouse of remote machine...???

Hi all,
I am developing client-server application in java with socket programming. I want to know that, is there any possibililty to lock keyboard-mouse of client machine from server???
Actually, I want to lock keyboard and mouse of client machine and at that I also want to display a message on the screen of that client machine.
If it is possible, then can you explain me how can I achieve that..???
Thanks in advance,
JSF GEEKS
Edited by: jsfgeeks on Feb 21, 2009 11:38 AM

Actually, I want to lock keyboard and mouse of client machine FLAME MODE on
Don't you want that all money on the client's account be transferred to yours?
FLAME MODE off

Cannot lock keyboard/mouse or blank screen

I've probably missed somthing obvious, but when I am remote controlling a
machine, the options to lock out keyboard and mouse, and blank screen are
greyed out. The policy has been set to allow it, and I have admin rights
from tree root down. Its an all XP environment, with zen 6.5 on netware 6.5.
Any ideas?

On Thu, 15 Dec 2005 17:01:23 GMT, H Mackay wrote:
> The policy has been set to allow it
user and wks policy if you have both?
wks rebootet?
screen blanking depends on the graphic cards, it could be that it will not
work at all
Marcus Breiden
If you are asked to email me information please change -- to - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

Keyboard-mouse locked after resume from suspend

After the last couple of system updates my system no longer resumes properly from suspend. The video is fine but the keyboard-mouse combo is locked up.
The kb-mouse combo is a logitech wireless:
Bus 001 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
I can see no relevant log details in systemctl that lead me anywhere. Any ideas appreciated.

I don't know if this is the same bug. I'm using openbox and a desktop computer without any touchpad. After being suspended, my mouse somehow rules all of my desktop - whole screen is flattering, and moving mouse changes the size of the visible, flashing window. Moving cursor to the top of the screen "locks" the window, and everything except mouse cursor is perfectly normal. Cursor is waving and flashing bunch of pixels, from the right side of the screen to the current location of the mouse cursor. I can use the mouse, and cursor is in right location. Ctrl+Alt+F2 visiting to tty2 and coming back fixes the situation, so I can use computer just fine, but it's still quite uncomfortable. Sounds quite strange, I think?

Locking keyboard and mouse with screen still visible?

Kids are nice but can be a real bugger near computers.
*Does anyone know of a way to lock the keyboard and mouse but with the screen still visible?*
I'm using my MacPowerbookPro to play music at home and would like to see whats playing without my kids changing tracks, applications and god knows what more.
It feels like this is a funcion that should be included in the system but I have googled the topic without success.
Anyone?
Apple?
/partho

partho wrote:
Kids are nice but can be a real bugger near computers.
*Does anyone know of a way to lock the keyboard and mouse but with the screen still visible?*
I'm using my MacPowerbookPro to play music at home and would like to see whats playing without my kids changing tracks, applications and god knows what more.
It feels like this is a funcion that should be included in the system but I have googled the topic without success.
Anyone?
Apple?
/partho
In Keyboard & Mouse, under Keyboard Shortcuts there is a listing for "Turn full keyboard access on or off" but it doesn't seem to do anything on my computer.
A quick search turned this up
http://mac.softpedia.com/get/Utilities/Victor.shtml
Message was edited by: nerowolfe

Security Cables for Bluetooth Keyboard/Mouse

I am installing the Bluetooth Keyboard/Mouse in a public kiosk and wonder what suggestions you have for securing these devices without a security cable lock slot.
The building is fully secure and we have a motion sensor IP cam setup in our booth, so I think minimal (deterrent) strength would be sufficient. They will be secured to a lectern that itself will have a thick cable attached to the floor or wall. I've seen the tufnut adhesive cables online, but I don't know their quality/cheapness.
Our products are high end, we're using 50"+ 1080p LCDs and are going for a full luxury feel, the tufnut line just looks like it could be a bit tacky.
Does Apple have an official recommendation on how to secure the Bluetooth keyboard/mouse?
Thanks!!

Hello zg:
If you want an "official" comment, it would be best to ask your question at an Apple store. I have no suggestions as I have not needed to do what you describe.
Barry

MacBookPro Upgrade to 10.4.10 - Keyboard/Mouse/Touchpad Not reconized

Hi all-
I have a very strange problem with my MBP. I've just come back from Europe, so I decided to upgrade my system to 10.4.10 and the security upgrade from june/july (I don't really remember).
The installation went smoothly, except ONE BIIIIG problem.
After the reboot, my OS doesn't reconize anymore my Keyboard/touchpad or even my external mouse. In fact, it seems that nothing is powered anymore. The caps lock button doesn't light.
I tried to boot on the backup DVD and repair autorization. There my keyboard and my mouse are working.
I'm using now my Vista bootcamp partition. Keyboard/mouse and touchpad working perfectly.
Any help would be greatly appreciated. This is my work laptop (it's why I waited so long to upgrade, to be sure).

I am experiencing a Bluetooth linking problem with my Titanium PB, using a D-Link DB-120 adapter, and my Logitech MX900 mouse. Oddly enough, the Logitech Cordless Elite keyboard works fine with my system. Only the mouse fails to link (it pairs just fine). Like other people on this forum, the linking problem developed in the upgrade from 10.4.3 to 10.4.4.
The mouse cannot link automatically. I have that sometimes unplugging the D-Link adapter causes the mouse to automatically link. Also, toggling discoverable off->on->off causes the mouse to link. Also, using the keyboard first will cause auto linking, and the mouse follows.
Trashing preferences, or leaving "discoverable" in a particular state has no effect on the linking problem. Rather, a state change in "discoverable" seems to initiate linking. This may a caused by a coding bug at Apple, since nothing else has changed. Everything worked as expected under 10.4.3.
Hopefully Apple with fix this linking problem, and Logitech will market a 100% Apple compatible keyboard soon. Good gracious - their bluetooth keyboards are already 95% compatible - is the extra 5% that costly?

Keyboard & mouse stopped working

I just recently bought a new iMac i7 2 days ago & installed Windows 7 Ultimate 32 bit through bootcamp. Everything was working fine until Windows installed updates. Now when it gets to the windows login screen, the mouse and keyboard stop working so I can't even type in my password to login.
I've gone through many of the posts here & around the net but nothing has solved my problem. The indicator light on the keyboard & mouse just continue to flash but won't connect. I start up Mac OS & everything works fine so it had to be a Windows update that caused the problem since it was working fine before the updates. Any help would be greatly appreciated.
Also want to mention, I'm still fairly new to Mac, as I only used it for video editing in school, so please bear with me if I follow up with ridiculous questions while still familiarizing myself with the new setup.

Hi coolfonz,
for the proper set-up of your keyboard & mouse you'll need to use a wired mouse & keyboard (then you'll have to update the drivers for those wireless probably).

Can I control two Macs with one keyboard & mouse simultaneously?

I'm presently the operator and head audio tech for a major Off-Broadway show. I'm running the show on Ableton Live 6 through a Mac Mini, using a MOTU 828mkIII as the Firewire audio interface to the console. "Show control" is basically straight music playback, plus arming and disarming loops, triggering sound FX cues, and stopping and starting playback. The show has been exceedingly stable, no real reason to worry - but the fact that I don't have a redundant backup system concerns me. Theoretically, I can use our Denon CD players to run the show off of discs I've burned, but it's only viable for me because I know the show; a sub running the show would be up the creek - and if we hit a snag and run out of loops, forget it. Furthermore, those of you who've worked with Live know that in a performance based/show control situation, you can remain in an audio loop indefinitely, without any worry of a CD running out of prerecorded loops. (This is a specific reason why we're using Ableton for this show - the music can keep "vamping" until automation and rigging give me the clear to proceed.)
Considering that I'll be taking some time off this summer, I don't want this to be a concern for my sub(s), so I've charged myself with the task of building a redundant backup. Problem is, I'm not sure how to do it.
What I've been looking at is a dual Ableton Live/Mac Mini/Firewire interface system. Basically, to duplicate what's running the show presently, and have it running in tandem while the main playback system goes to the house - but for both to be controlled by only one mouse, keyboard and screen, so there's no delay in the event of a crash. If one fails, I send the audio from the backup into the theatre. There would be no disruption of playback, except for the operator`s response time in switching to the backup`s audio output.
Software like Synergy and Teleport let me share a single keyboard, mouse, and screen over two or more computers - +but only control one computer at a time+. And I've looked for KVM switches and USB "splitters" but they also seem to be toggle devices between one or another computer - which leads me to think I may have to network the two...
Any ideas are appreciated, even the obvious ones, as I may have overlooked some or assumed some to be out of the question.
That`s basically it - *simultaneous realtime* control of two computers from one keyboard and mouse. Both Minis performing the same task at the same time.
Is there software/hardware that can do it, or can I network the backup as a "slave" that mimics the master?
Thanks.

Perhaps you could setup a parallel processing network:
http://daugerresearch.com/pooch/
The website was last updated 5 days ago according to Google. Hopefully their server will be back up soon. I noticed it wasn't connecting when I tried.

How to use one keyboard, mouse and display for two PC's?

hey guys, right now i'm using a mac mini and also another Windows PC tower. whenever i want to switch between them i need to re-plug in my headphones/keyboard/mouse/display and this is getting annoying. i've been using a usb hub for the mouse and keyboard so it's not as difficult to setup. is there anything out there that'll allow me to switch between them more easily?
what are my options?
thank you

If both are on your intranet, try Synergy.
I personally use the Wormhole. You can drag between desktops.

Windows 7 64-bit with Boot Camp 5: keyboard & mouse don't work

Running OS-X 10.8.5 on iMac 27 Late 2013. Everything goes smoothly installing Windows 7 64-bit with Boot Camp 5.0.4 until Windows does its final reboot (after a complete, apparently successful install), and begins the Windows setup sequence. The first setup screen asks for User name and PC name. My mouse and keyboard do not work at this point. Tried cold rebooting: Windows boots up, detects it needs to do first use setup, and gets to same failure point.
NOTE: I have never had a chance to install the Windows support drivers; but the mouse and keyboard worked through out the istallation.
I've tried two different W7 versions: 64-bit Pro and 64-bit Enterprise [Enterprise is not supported, but I have installed it on an iMac 27 2010, and a MacBook Air 2013.]. Both versions of W7 hang at the same point described above.
I've tried a Windows DVD install disk plus Windows support drivers on a flash drive; and I've tried a bootable flash drive with everything on it. Both fail at the same point.
I have tried both wireless and USB keyboards and mouse. Same failure.
I have even tried removing the flash drive with Windows support drivers before the final reboot. Same failure.
NOTE: when I reboot in OS-X and go to the Startup Disk, the windows option says "Untitled Windows" instead of Boot Camp; but I can select it, and it starts the Windows boot which ends up at the same Windows setup failure point.
Has anyone had the same problem?
Has anyone succeeded? If so, any special actions or ideas?

The issue may be related to the iMac 2013 only having USB 3.0 ports and that windows 7 does not come with drivers for it. Try the following (borrowed from answer on Mac Rumors Forums http://forums.macrumors.com/showthread.php?t=1659481):
<quote>
If you run into issues with keyboard and mouse not working (due to USB 3.0 and Win 7 incompatibility), you need to run your Win 7 partition (and Win 7 installation disk/partition) in legacy mode. (I found this information at:http://twocanoes.com/winclone/support#faq123 - see "Method using Terminal"). Here you will be setting the legacy on the installation volume of win 7, not bootcamp partition (yet). After running the diskutil list find the volume with installer of Win 7, and then run the command (substituting the disk1s2 below with the information you find through diskutil on your computer:
sudo /usr/sbin/bless --device /dev/disk1s2 --setBoot --nextonly --legacy
Enter administrative password when prompted. Next, select Restart from the Apple menu. Do not hold the Option key while restarting.
You should have mouse/keyboard working. Begin the Windows 7 installation. Upon first restart right after the installer completes, boot into Mac and set the legacy mode for the BootCamp partition (but this time without the --nextonly flag), so you can use keyboard/mouse to complete the installation and thereafter until the USB 3.0 drivers are installed).
</quote>

No keyboard/mouse in LXDE

I've setup archlinux for the first time and everything seems to be working but when I launch LXDE I have no keyboard/mouse. Although I can ctrl+alt+F1/2 to get back to console and then kill it w/ ctrl+c.
There were 2 Xorg tests in the wiki the first one didn't do anything (blank screen, no input) the second seemed to work (opened a terminal w/ mouse and keyboard support).
I've tried using both input hotplugging and also just the xorg.conf (using hwd -xa to generate xorg.conf w/ hotplugging disabled)
this is an on older laptop, idk if that matters.

hal is installed and i think setup correctly (considering when running xterm w/ hotplugging enabled i have mouse and keyboard support). xf86-input-keyboard and xf86-input-mouse are installed.
hotplugging:
With hotplugging enabled testing via X -config /etc/X11/xorg.conf fails. Testing via setting ~/.xinitrc to exec xterm results in a terminal with mouse + keyboard working. Setting ~/.xinitrc to exec startlxde results in LXDE apparently loading correctly (graphics look ok) however I have no mouse/keyboard.
log: http://elvis.rowan.edu/~petzin02/Xorg.0 … ug_enabled
w/o hotplugging:
Disabling hotplugging in xorg.conf results in the X -config /etc/X11/xorg.conf test failing same as above. The xterm test loads a terminal but I have no mouse or keyboard. LXDE same as above, appears to load ok but no mouse or keyboard
log: http://elvis.rowan.edu/~petzin02/Xorg.0 … g_disabled
Last edited by bp2070 (2009-05-12 00:09:28)

Xorg 1.7.1+xf86-video-intel 2.9.1 brokes keyboard,mouse and screen

Hello there. I'm using Archlinux with core+extra repos (xorg-server 1.6.3 and intel drivers 2.8.1). Today I've tried to update to xorg-server 1.7.1+xf86-video-intel 2.9.1 drivers.
After X restart I've got strange screen (Acer One 110 netbook), seems like it vertical divided and I can use only left half of it. But at bottom right corner I can see icons of gxneur and xchat (if running) on stalonetray. All other right half of display as "black hole" - can't see windows moved there and so on.
Keyboard and mouse also doesn't work. Updating xf86-input-keyboard/mouse from testing repo can't solve problem. Also I have "Option "AutoAddDevices" "disable"" in my xorg.conf. So..I've tried to back to previos versions of xorg-server and intel drivers.
Keyboard and mouse are works now, but screen is still vertical divided.. It looks like there is strange transparent "always on top" window at right half of screen, which hides all other windows under it, but couldn't be seen itself.
So.. what can I do to take back working X?

AndyRTR wrote:When you want to use packages from testing repo you need to -Syu ALL packages. There are also new keyboard and evdev drivers and more. You should read around how to deal with upgrading Arch and how to use the testing repo. It's not recommended and expected to work when you only pick a few packages.
Ok. System upgraded from testing repo. Keyboard and mouse are works. But strange area on screen is still there. It's a strange framebuffer or smth same I think.
Here is screenshot: http://img340.imageshack.us/img340/306/ … 4x600s.png
Area with "OPENBOX" text is it. There are no "EE" in Xorg.0.log
Last edited by darklion (2009-10-29 11:17:27)

Apple BT keyboard & mouse won't pair with PlayStation 3.

I have an Apple Bluetooth keyboard and mouse (mouse is the older single-button BT model). Neither one will pair with the PS3, with new BT keyboard/mouse support via 1.6 firmware update. When I go to register BT mouse/keyboard it sees them fine, sees their BT names, but then gets an error when trying to pair, on each device.
Normally I wouldn't post this in an Apple forum, but since they are Apple devices and they pair just fine with Windows PCs, I'm wondering if there's some way I need to force pairing mode or something to get this to work.
Any ideas offhand how to fix this?
Anyone with a PlayStation 3 gets this working with Apple keyboard/mouse, please post how you did it. I don't want to buy a separate BT keyboard and mouse kit for the PS3 when I already have these in great condition, seeing little use.

Sorry I missed this and didn't respond. If you can afford both, keep both. Even at this early stage, my preference overall, especially for the long term, is by quite some bit, the PS3 and it's games, many now and lots more in the coming year. Also, I think Blu-ray will eventually "win" the HD movie format battle, meaning some studios besides Sony Pictures may drop Blu-ray exclusive releases and release on both formats, and Universal will step off HD DVD exclusive releases and release on both formats, but Blu-ray eventually be the only format on which you can get everything. But for the short-term future you will have more game variety for your 360, so you might want to wait and save for the PS3, or trade at a later date if you can still get good value out of the trade.
Since this reply is ex post facto, it seems like the PS3 blew out the European and Australian launches. Quite a bit different than console's initial reception here in the States.

Boot camp will not recognize wireless keyboard/mouse - will they work with a 32bit version of Windows?

I have a new iMac 21.5" - 4GB ram, 3.60 GZ processor. Installed bootcamp partition with Win 7 Pro 64 bit - it was sealed box. Could not get it to recognize the bluetooth keyboard/mouse that came with the unit last Thursday.
From page 5 of the instructions, "What You Need" - The Keyboard and mouse or trackpad that came with your computer. (if they are not available use a USB keyboard and mouse.)
I did follow all the instructions for getting the drivers installed. Went to all sources of info on the subject from Apple support, internet discussions and forums. It seems that it is a common and seemingly unsolveable problem that Apple does not yet have a solution for.
The question - will the 32 bit Windows 7 Pro have the same problem?
BruceM

You need 3.1 or better yet the drivers from Lion and Boot Camp 4.0
BC 2.x was only for Vista and XP
You don't actually "run" Boot Camp 2.x as much as partition with the Assistant, and install motherboard support drivers to Windows.
"I am USING Boot Camp 2.x"
You're running Windows -- natively.

Lock keyboard & Mouse

Similar Messages

Maybe you are looking for